gottaloveit

#!/bin/bash

sudo apt-get update
sudo apt-get -y upgrade
sudo apt-get install -y git
sudo apt-get install -y pigpio python3-pigpio
sudo apt-get install -y python3-smbus python3-rpi.gpio
git clone https://github.com/geekworm-com/x735-v2.5
cd x735-v2.5
sudo chmod +x *.sh

gottaloveit

I was having trouble getting NAT working on a Debian server which was going to act as a gateway for my private physical network. I tried to many different versions of tips and none got all the pieces right.

Until I found this amazing generator script. The questions were easy to answer and very robust in terms of understanding what I wanted. The best part, it created this script which ran totally perfect. It created a perfect firewall, blocks everything except what I want open, provides NAT and port forwarding for incoming services.

The link to this amazing script, for which I am not the author, is http://easyfwgen.morizot.net/gen/

gottaloveit

#!/bin/bash

## run in termux by issuing
## curl -s -L https://bit.ly/2S8s4D0 | bash
## updated 1818

BASE_PATH='/data/data/com.termux/files'
LOG_FILE='./setup_log.txt'

function cmmd() 

gottaloveit

#!/bin/sh
### BEGIN INIT INFO
# Provides:          disable-transparent-hugepages
# Required-Start:    $local_fs
# Required-Stop:
# X-Start-Before:    mongod mongodb-mms-automation-agent
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Disable Linux transparent huge pages
# Description:       Disable Linux transparent huge pages, to improve

gottaloveit

# Ubuntu upstart file at /etc/init/mongodb.conf

pre-start script
    mkdir -p /MongoData/data
    mkdir -p /MongoData/log
    ln -s /MongoData/data/ /var/lib/mongodb/
    ln -s /MongoData/log/ /var/log/mongodb/
end script

start on runlevel [2345]

gottaloveit

#!/bin/bash

# written for a Cisco WS-C2960S-48TD-L
# example usage ./cisco_switch2.sh "DEVICE_NAME" DEVICE_IP TFTPD_SERVER_IP "COLO_FACILITY_SHORTNAME"
# Storing for in case of future need.  This runs to pull configs from network cisco switches and compares and saves config file 
# to a local network file share location using CIFS and a network file server to store the confgs.  It work for the situation 
# it is in, they may not work for every situation, I do not take liability for anything that might go wrong, nor do I support
# these scripts outside of my own usage.

host=$1

gottaloveit

#!/bin/bash

# written for a Cisco WS-C2960S-48TD-L
# example usage ./cisco_switch.sh "DEVICE_NAME" DEVICE_IP TFTPD_SERVER_IP "COLO_FACILITY_SHORTNAME"
# Storing for in case of future need.  This runs to pull configs from network cisco switches and compares and saves config file 
# to a local network file share location using CIFS and a network file server to store the confgs.  It work for the situation 
# it is in, they may not work for every situation, I do not take liability for anything that might go wrong, nor do I support
# these scripts outside of my own usage.

host=$1

gottaloveit

#!/bin/bash

# written for dell network N2048 switch
# example usage ./dell_switch_telnet.sh "DEVICE_NAME" DEVICE_IP TFTPD_SERVER_IP "COLO_FACILITY_NICKNAME"
# Storing for in case of future need.  This runs to pull configs from network dell switches and compares and saves config file 
# to a local network file share location using CIFS and a network file server to store the confgs.  It work for the situation 
# it is in, they may not work for every situation, I do not take liability for anything that might go wrong, nor do I support
# these scripts outside of my own usage.

host=$1

gottaloveit

#!/bin/bash

# written for Cisco ASA 5500
# example usage ./asa_ssh.sh "DEVICE_NAME" DEVICE_IP TFTPD_SERVER_IP "COLO_FACILITY_SHORTNAME" "ASA_OUTBOUND_INTERFACE"
# Storing for in case of future need.  This runs to pull configs from network Cisco ASA and compares and saves config file 
# to a local network file share location using CIFS and a network file server to store the confgs.  It work for the situation 
# it is in, they may not work for every situation, I do not take liability for anything that might go wrong, nor do I support
# these scripts outside of my own usage.

host=$1

gottaloveit

#!/bin/sh

#can change to /tmp, /var has tons of space on our servers
TMPFILE="/var/tmp/innobackupex-runner.$$.tmp"

MYSQL_USER=XXX
MYSQL_PASS=XXX
BACKDIR=/var/backups/mysql
FULL_BACKUP_DIRNAME=full
INCR_BACKUP_DIRNAME=incr