files/gentoo-apache-2.4.1-patrick-20120401-2.4.2-r4.patch

filesgentoo-apache-2.4.1-patrick-20120401-2.4.2-r4.patch.txt

--- conf/httpd.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/httpd.conf	2012-07-22 04:12:51.932000083 +0200
@@ -36,6 +36,7 @@
 # ServerRoot at a non-local disk, be sure to point the LockFile directive
 # at a local disk.  If you wish to share the same ServerRoot for multiple
 # httpd daemons, you will need to change at least LockFile and PidFile.
+# Comment: The LockFile directive has been replaced by the Mutex directive
 ServerRoot "/usr/lib/apache2"
 
 # Dynamic Shared Object (DSO) Support
--- conf/modules.d/00_apache_manual.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_apache_manual.conf	2012-07-22 04:12:51.932000083 +0200
@@ -8,8 +8,7 @@ AliasMatch ^/manual(?:/(?:de|en|es|fr|ja
 <Directory "/usr/share/doc/apache-VERSION/manual">
 	Options Indexes
 	AllowOverride None
-	Order allow,deny
-	Allow from all
+	Require all granted
 
 	<Files *.html>
 		SetHandler type-map
--- conf/modules.d/00_default_settings.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_default_settings.conf	2012-07-22 04:14:30.819995128 +0200
@@ -69,13 +69,13 @@ HostnameLookups Off
 # filesystems or if support for these functions is otherwise
 # broken on your system.
 EnableMMAP On
-EnableSendfile On
+EnableSendfile Off
 
-# FileEtag: Configures the file attributes that are used to create
+# FileETag: Configures the file attributes that are used to create
 # the ETag (entity tag) response header field when the document is
 # based on a static file. (The ETag value is used in cache management
 # to save network bandwidth.)
-FileEtag INode MTime Size
+FileETag MTime Size
 
 # ContentDigest: This directive enables the generation of Content-MD5
 # headers as defined in RFC1864 respectively RFC2616.
@@ -107,8 +107,7 @@ LogLevel warn
 <Directory />
 	Options FollowSymLinks
 	AllowOverride None
-	Order deny,allow
-	Deny from all
+	Require all denied
 </Directory>
 
 # DirectoryIndex: sets the file that Apache will serve if a directory
@@ -127,8 +126,7 @@ LogLevel warn
 # The following lines prevent .htaccess and .htpasswd files from being
 # viewed by Web clients.
 <FilesMatch "^\.ht">
-	Order allow,deny
-	Deny from all
+	Require all denied
 </FilesMatch>
 
 # vim: ts=4 filetype=apache
--- conf/modules.d/00_error_documents.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_error_documents.conf	2012-07-22 04:12:51.932000083 +0200
@@ -30,8 +30,7 @@ Alias /error/ "/usr/share/apache2/error/
 	Options IncludesNoExec
 	AddOutputFilter Includes html
 	AddHandler type-map var
-	Order allow,deny
-	Allow from all
+	Require all granted
 	LanguagePriority en cs de es fr it ja ko nl pl pt-br ro sv tr
 	ForceLanguagePriority Prefer Fallback
 </Directory>
--- conf/modules.d/00_mod_autoindex.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mod_autoindex.conf	2012-07-22 04:12:51.932000083 +0200
@@ -7,8 +7,7 @@ Alias /icons/ "/usr/share/apache2/icons/
 <Directory "/usr/share/apache2/icons">
 	Options Indexes MultiViews
 	AllowOverride None
-	Order allow,deny
-	Allow from all
+	Require all granted
 </Directory>
 </IfModule>
 
--- conf/modules.d/00_mod_info.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mod_info.conf	2012-07-22 04:12:51.936000083 +0200
@@ -3,9 +3,7 @@
 # http://servername/server-info
 <Location /server-info>
 	SetHandler server-info
-	Order deny,allow
-	Deny from all
-	Allow from 127.0.0.1
+	Require host 127.0.0.1
 </Location>
 </IfDefine>
 
--- conf/modules.d/00_mod_mime.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mod_mime.conf	2012-07-22 04:12:51.936000083 +0200
@@ -1,12 +1,3 @@
-# DefaultType: the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-DefaultType text/plain
-
 <IfModule mime_module>
 # TypesConfig points to the file containing the list of mappings from
 # filename extension to MIME-type.
--- conf/modules.d/00_mod_status.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mod_status.conf	2012-07-22 04:12:51.936000083 +0200
@@ -3,9 +3,7 @@
 # with the URL of http://servername/server-status
 <Location /server-status>
 	SetHandler server-status
-	Order deny,allow
-	Deny from all
-	Allow from 127.0.0.1
+	Require host 127.0.0.1
 </Location>
 
 # ExtendedStatus controls whether Apache will generate "full" status
--- conf/modules.d/00_mod_userdir.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mod_userdir.conf	2012-07-22 04:12:51.936000083 +0200
@@ -11,12 +11,10 @@ UserDir public_html
 	AllowOverride FileInfo AuthConfig Limit Indexes
 	Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
 	<Limit GET POST OPTIONS>
-		Order allow,deny
-		Allow from all
+		Require all granted
 	</Limit>
 	<LimitExcept GET POST OPTIONS>
-		Order deny,allow
-		Deny from all
+		Require all denied
 	</LimitExcept>
 </Directory>
 
--- conf/modules.d/00_mpm.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/00_mpm.conf	2012-07-22 04:12:51.936000083 +0200
@@ -7,7 +7,7 @@
 PidFile /var/run/apache2.pid
 
 # The accept serialization lock file MUST BE STORED ON A LOCAL DISK.
-#LockFile /var/run/apache2.lock
+# Mutex file:/var/run/apache_mpm_mutex
 
 # Only one of the below sections will be relevant on your
 # installed httpd.  Use "/usr/sbin/apache2 -l" to find out the
@@ -17,7 +17,7 @@ PidFile /var/run/apache2.pid
 # These configuration directives apply to all MPMs
 #
 # StartServers: Number of child server processes created at startup
-# MaxClients: Maximum number of child processes to serve requests
+# MaxRequestWorkers: Maximum number of child processes to serve requests
 # MaxRequestsPerChild: Limit on the number of requests that an individual child
 #                      server will handle during its life
 
@@ -31,7 +31,7 @@ PidFile /var/run/apache2.pid
 	StartServers		5
 	MinSpareServers		5
 	MaxSpareServers		10
-	MaxClients			150
+	MaxRequestWorkers	150
 	MaxRequestsPerChild	10000
 </IfModule>
 
@@ -46,7 +46,7 @@ PidFile /var/run/apache2.pid
 	MinSpareThreads		25
 	MaxSpareThreads		75
 	ThreadsPerChild		25
-	MaxClients			150
+	MaxRequestWorkers	150
 	MaxRequestsPerChild	10000
 </IfModule>
 
@@ -60,7 +60,7 @@ PidFile /var/run/apache2.pid
 	MinSpareThreads		25
 	MaxSpareThreads		75
 	ThreadsPerChild		25
-	MaxClients			150
+	MaxRequestWorkers	150
 	MaxRequestsPerChild	10000
 </IfModule>
 
@@ -76,7 +76,7 @@ PidFile /var/run/apache2.pid
 	MinSpareProcessors	2
 	MinProcessors		2
 	MaxProcessors		10
-	MaxClients			150
+	MaxRequestWorkers	150
 	MaxRequestsPerChild	1000
 	ExpireTimeout		1800
 
@@ -92,7 +92,7 @@ PidFile /var/run/apache2.pid
 	StartServers		5
 	MinSpareServers		5
 	MaxSpareServers		10
-	MaxClients			150
+	MaxRequestWorkers	150
 	MaxRequestsPerChild	10000
 </IfModule>
 
--- conf/modules.d/40_mod_ssl.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/40_mod_ssl.conf	2012-07-22 04:12:51.940000083 +0200
@@ -57,7 +57,7 @@ SSLSessionCacheTimeout  300
 ## Semaphore:
 # Configure the path to the mutual exclusion semaphore the SSL engine uses
 # internally for inter-process synchronization.
-SSLMutex  file:/var/run/ssl_mutex
+Mutex file:/var/run/apache_ssl_mutex ssl-cache
 </IfDefine>
 
 # vim: ts=4 filetype=apache
--- conf/modules.d/46_mod_ldap.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/modules.d/46_mod_ldap.conf	2012-07-22 04:12:51.940000083 +0200
@@ -11,9 +11,7 @@ LDAPOpCacheTTL		600
 
 <Location /ldap-status>
 	SetHandler ldap-status
-	Order deny,allow
-	Deny from all
-	Allow from 127.0.0.1
+	Require host 127.0.0.1
 </Location>
 </IfDefine>
 
--- conf/vhosts.d/00_default_vhost.conf	2012-02-12 23:31:57.000000000 +0100
+++ conf/vhosts.d/00_default_vhost.conf	2012-07-22 04:12:51.940000083 +0200
@@ -25,9 +25,6 @@
 #Listen 12.34.56.78:80
 Listen 80
 
-# Use name-based virtual hosting.
-NameVirtualHost *:80
-
 # When virtual hosts are enabled, the main host defined in the default
 # httpd.conf configuration will go away. We redefine it here so that it is
 # still available.
--- conf/vhosts.d/default_vhost.include	2012-02-12 23:31:57.000000000 +0100
+++ conf/vhosts.d/default_vhost.include	2012-07-22 04:12:51.940000083 +0200
@@ -31,8 +31,7 @@ DocumentRoot "/var/www/localhost/htdocs"
 	AllowOverride All
 
 	# Controls who can get stuff from this server.
-	Order allow,deny
-	Allow from all
+	Require all granted
 </Directory>
 
 <IfModule alias_module>
@@ -66,8 +65,7 @@ DocumentRoot "/var/www/localhost/htdocs"
 <Directory "/var/www/localhost/cgi-bin">
 	AllowOverride None
 	Options None
-	Order allow,deny
-	Allow from all
+	Require all granted
 </Directory>
 
 # vim: ts=4 filetype=apache
--- docs/ip-based-vhost.conf.example	2012-02-12 23:31:57.000000000 +0100
+++ docs/ip-based-vhost.conf.example	2012-07-22 04:12:51.940000083 +0200
@@ -50,8 +50,7 @@
 		Options Indexes FollowSymLinks
 		AllowOverride None
 
-		Order allow,deny
-		Allow from all
+		Require all granted
 
 	</Directory>
 
@@ -65,8 +64,7 @@
 	#<Directory "/var/www/example.com/cgi-bin">
 	#	AllowOverride None
 	#	Options None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 
 	# If you have multiple users on this system, each with their own vhost,
@@ -88,8 +86,7 @@
 	#		Options IncludesNoExec
 	#		AddOutputFilter Includes html
 	#		AddHandler type-map var
-	#		Order allow,deny
-	#		Allow from all
+	#		Require all granted
 	#	</Directory>
 	#</IfDefine ERRORDOCS>
 	
@@ -100,8 +97,7 @@
 	#<Directory "/var/www/example.com/icons/">
 	#	Options Indexes MultiViews
 	#	AllowOverride None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 
 	# Create a logfile for this vhost
--- docs/name-based-vhost.conf.example	2012-02-12 23:31:57.000000000 +0100
+++ docs/name-based-vhost.conf.example	2012-07-22 04:12:51.940000083 +0200
@@ -23,17 +23,8 @@
 #
 # If you want to use a defintion other then the default, you should remove
 # -D DEFAULT_VHOST from APACHE2_OPTS in /etc/conf.d/apache2.
-#
-# All requests (on any IP address) to port 80 will be handled by Virtual Hosts
-# This is the default setting in Gentoo:
-#NameVirtualHost *:80
-#
-# Only requests on this IP address on port 80 will be handled by Virtual Hosts
-# (note: you may need to modify/add a Listen directive in httpd.conf)
-#NameVirtualHost 1.2.3.4:80
 
-# The actual virtual host definition. Note that the *:80 MUST match whatever
-# is set for NameVirtualHost
+# The actual virtual host definition.
 <VirtualHost *:80>
 	# ServerName and ServerAlias are how the server determines which virtual
 	# host should be used.
@@ -70,8 +61,7 @@
 		Options Indexes FollowSymLinks
 		AllowOverride None
 
-		Order allow,deny
-		Allow from all
+		Require all granted
 	</Directory>
 
 	# By default cgi-bin points to the global cgi-bin in /var/www/localhost
@@ -84,8 +74,7 @@
 	#<Directory "/var/www/example.com/cgi-bin">
 	#	AllowOverride None
 	#	Options None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 
 	# If you have multiple users on this system, each with their own vhost,
@@ -107,8 +96,7 @@
 	#		Options IncludesNoExec
 	#		AddOutputFilter Includes html
 	#		AddHandler type-map var
-	#		Order allow,deny
-	#		Allow from all
+	#		Require all granted
 	#	</Directory>
 	#</IfDefine ERRORDOCS>
 	
@@ -119,8 +107,7 @@
 	#<Directory "/var/www/example.com/icons/">
 	#	Options Indexes MultiViews
 	#	AllowOverride None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 	
 	# Create a logfile for this vhost
--- docs/ssl-vhost.conf.example	2012-02-12 23:31:57.000000000 +0100
+++ docs/ssl-vhost.conf.example	2012-07-22 04:12:51.944000083 +0200
@@ -40,8 +40,7 @@
 		Options Indexes FollowSymLinks
 		AllowOverride None
 
-		Order allow,deny
-		Allow from all
+		Require all granted
 	</Directory>
 
 	# By default cgi-bin points to the global cgi-bin in /var/www/localhost
@@ -54,8 +53,7 @@
 	#<Directory "/var/www/example.com/cgi-bin">
 	#	AllowOverride None
 	#	Options None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 
 	# If you have multiple users on this system, each with their own vhost,
@@ -77,8 +75,7 @@
 	#		Options IncludesNoExec
 	#		AddOutputFilter Includes html
 	#		AddHandler type-map var
-	#		Order allow,deny
-	#		Allow from all
+	#		Require all granted
 	#	</Directory>
 	#</IfDefine ERRORDOCS>
 
@@ -91,8 +88,7 @@
 	#<Directory "/var/www/example.com/icons/">
 	#	Options Indexes MultiViews
 	#	AllowOverride None
-	#	Order allow,deny
-	#	Allow from all
+	#	Require all granted
 	#</Directory>
 
 	# Create a logfile for this vhost
@@ -108,10 +104,6 @@
 
 # If you want to force SSL for a virtualhost, you can uncomment this section
 
-# Make sure there is a proper NameVirtualHost already setup, if not, you
-# can uncomment this one. See name-based-vhost.conf.example for details.
-#NameVirtualHost *:80
-
 # You can optionally use the IP address here instead, if you want every
 # connection to this IP address to be forced to SSL
 #<VirtualHost *:80>