heavysixer

Additional card mechanic idea which is that there are two characters per card. One for defense and one for offense. The card is removed only when the defensive and offensive sides have been destroyed.

Cards start with base attributes and abilities, which can be modified by a variety of triggers.

What if?
- some cards took up more than one slot in the hand
- Some cards could be combined while still in the (deck, discard pile, hand)
- Actions happened based on winning or losing streaks

Game Components

heavysixer

# A simple Book Cipher
# https://en.wikipedia.org/wiki/Book_cipher
# input = <<EOF
# A book cipher is a cipher in which the key is some aspect of a book or other
# piece of text; books being common and widely available in modern times, users
# of book ciphers take the position that the details of the key are sufficiently
#  well hidden from attackers in practice.
#EOF
# cipher = BookCipher.new
# encoded = cipher.encode(input)

heavysixer

(function () {
  'use strict';
  /**
   * @ngdoc directive
   * @name hsFormErrors
   * @module humansized.directives.hsFormErrors
   * @restrict E
   *
   * @description
   *

heavysixer

Built with blockbuilder.org

heavysixer

[ Launch: prototype: d3.geo topojson v1 ] 7d4a79d0bc551c446ff3 by heavysixer[ Launch: prototype: d3.geo topojson v1 ] 15f816958d3a54e9e798 by heavysixer[ Launch: prototype: d3.geo topojson v1 ] ea8cb87ef3c5574d38b1 by enjalot[ Launch: Tributary inlet ] 4700486 by enjalot

heavysixer

[ Launch: prototype: d3.geo topojson v1 ] f30c2f71292587b235da by heavysixer[ Launch: prototype: d3.geo topojson v1 ] 15f816958d3a54e9e798 by heavysixer[ Launch: prototype: d3.geo topojson v1 ] ea8cb87ef3c5574d38b1 by enjalot[ Launch: Tributary inlet ] 4700486 by enjalot

heavysixer

[ Launch: prototype: d3.geo topojson v1 ] 15f816958d3a54e9e798 by heavysixer[ Launch: prototype: d3.geo topojson v1 ] ea8cb87ef3c5574d38b1 by enjalot[ Launch: Tributary inlet ] 4700486 by enjalot

heavysixer

[ Launch: test ] 65e0ac8e993d474e19a3 by heavysixer[ Launch: test ] 4653053 by enjalot[ Launch: test ] 4652017 by enjalot[ Launch: test ] 4582399 by enjalot

heavysixer

Assembly

Assembly is straightforward but takes a while. Comes with all the tools you need. Everything is metric. I recommend labeling the screw packets before starting so you know which size is which.

I ended up tightening the drive belts after initial assembly, which is tough to do. I used vise grips to help. Do not overtighten the belts however, because it can cause strain on the servo motors.

I also added a couple washers (of my own) to the pen mechanism to reduce slop. On either side of the arm that raises / lowers the pen. If you do not add your own washers, you can also use the white plastic spacers that come with the plotter.

Ensure that the pivot screw that holds the drawing arm to the upper assembly is tight however. Horizontal slop will lead to impersice drawings.

heavysixer

emails go here: