Skip to content

Instantly share code, notes, and snippets.

// ==UserScript==
// @name @chaoticvibing Twitter Blue Nerd - twitter.com
// @namespace Violentmonkey Scripts
// @match *://*.twitter.com/*
// @match *://*.x.com/*
// @grant none
// @version 1.9.2
// @author @chaoticvibing - GH @busybox11
// @description 11/9/2022, 11:45:28 PM
// @updateURL https://gist.githubusercontent.com/busybox11/53c76f57a577a47a19fab649a76f18e3/raw
@dglaude
dglaude / scale_x4_x2.py
Created May 2, 2021 22:55
WIP: Thermal Camera++ FeatherS2 + FeatherWing Keyboard + MLX90640 + ulab x4 bilinear scaling + x2 displayio scaling
from bbq10keyboard import BBQ10Keyboard, STATE_PRESS, STATE_RELEASE, STATE_LONG_PRESS
from adafruit_stmpe610 import Adafruit_STMPE610_SPI
import adafruit_ili9341
import adafruit_sdcard
import digitalio
import displayio
import neopixel
import storage
import board
import time
@gbaman
gbaman / HowToOTGFast.md
Last active May 14, 2024 10:26
Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details - http://blog.gbaman.info/?p=791

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

@walesmd
walesmd / IconServiceAgent.md
Last active June 4, 2024 19:48
A lot of people are having issues with com.apple.IconServicesAgent. Since this is a very new issue, Google was no help and `man iconservicesd` is even more hilarious. I eventually fixed it, when I was working on a completely different issue (that is still not fixed). The instructions are below and on the Apple Support Forum, https://discussions.…

I was chasing down another issue (slow "Save As") and thought these two issues may have been related (with QuickLook being the common broken link). Unfortunately, my "Save As" dialog is still miserably slow on the initial load; but IconServicesAgent hasn't gone above 30MB and he rarely makes an appearance in the Console!

Some of these steps may not be necessary, but here are all of the steps I took that inadverdently put IconServicesAgent back in its place. Note: all commands are a single-line, if they appear to be multiple that's just the forum formatting.

  1. Check for any QuickLooks related .plist files. In a terminal: mdfind com.apple.quicklook. -name .plist

  2. I only had files at the system level (specifically within /System/Library/LaunchAgents/). If you have others, modify the directions below to take that into account (re-introducing plist files from the system level back up to the user).

  3. Make some temporary directories to store these plist files, just in case: mkdir ~/tmp-quicklook