interbiznw

DigitalOcean does not provide a way to download a snapshot of your droplet locally. You can use rsync to accomplish this instead.

On your local machine, assuming you have added your-server in your SSH config:

rsync -aAXHv --append-verify --exclude={"/dev/*","/proc/*","/sys/*","/tmp/*","/run/*","/mnt/*","/media/*","/lost+found"} your-server:/

• -a : archive mode (all files, with permissions, etc.)
• -A : preserve ACLs/permissions (not included with -a)

interbiznw

#!/usr/bin/python
# Read a Pir-sensor and send a Mqtt message when motion detected
# Uses edge detection to limit the rate of Mqtt-messages
import paho.mqtt.client as paho
import time
import urlparse
import RPi.GPIO as GPIO
import datetime

# Mqtt

interbiznw

blueprint:
  name: Low battery level detection & notification for all battery sensors
  description: Regularly test all sensors with 'battery' device-class for crossing
    a certain battery level threshold and if so execute an action.
  domain: automation
  input:
    threshold:
      name: Battery warning level threshold
      description: Battery sensors below threshold are assumed to be low-battery (as
        well as binary battery sensors with value 'on').

interbiznw

[profile]
layer_height = 0.16
wall_thickness = 1.2
retraction_enable = True
solid_layer_thickness = 1.2
fill_density = 10
nozzle_size = 0.4
print_speed = 50
print_temperature = 200
print_temperature2 = 0

interbiznw

const fs = require('fs');
const AWS = require('aws-sdk');

// Enter copied or downloaded access id and secret here
const ID = '';
const SECRET = '';

// Enter the name of the bucket that you have created here
const BUCKET_NAME = 'test-bucket-1242tsr';;

interbiznw

var buttons;
buttons = document.getElementsByClassName('pam');
for (var i = 0; i < buttons.length; i++) {
			buttons[i].click();
}

var buttons;
buttons = document.getElementsByClassName('_42ft');
for (var i = 0; i < buttons.length; i++) {
	if(buttons[i].getAttribute('ajaxify') != null){

interbiznw

function transfer
    if test (count $argv) -eq 0
        echo "No arguments specified. Usage:\necho transfer /tmp/test.md\ncat /tmp/test.md | transfer test.md"
        return 1
    end

    ## get temporarily filename, output is written to this file show progress can be showed
    set tmpfile ( mktemp -t transferXXX )

    ## upload stdin or file

interbiznw

#!/bin/sh

# Change these two lines:
sender="root"
recepient="btcpj62"

if [ "$PAM_TYPE" != "close_session" ]; then
    host="`hostname`"
    subject="SSH Login: $PAM_USER from $PAM_RHOST on $host"
    msg_content=\"$subject\"

interbiznw

#!/usr/bin/env bash
# Purpose: DNS Propagation checker, Check and report if DNS NS are not equal to what they should be

# make sure DNS utilities are installed
if hash dig 2>/dev/null; then
    echo "DNS utilities not installed"
    exit
fi

# domain to check

interbiznw

#!/usr/bin/env bash
# Purpose: DNS Propagation checker
# Source: https://guides.wp-bullet.com

# make sure DNS utilities are installed
if hash dig 2>/dev/null; then
    echo "DNS utilities not installed"
    exit
fi