jadonk

#!/bin/sh

set -e

[ -z "$PART_PREFIX" ] && PART_PREFIX=''
DD_ARGS='bs=4K status=progress conv=fsync'

backup() {
	src="$1"
	dst="$2"

jadonk

Seeed BeagleBone^® Green Gateway host

When it comes to hardware setup, there is a fair bit of handwaving below. It is assumed for now you can figure out how to connect the antennas to the BeagleConnect Freedom boards and other similar hardware configuration steps.

OS Image for BeagleBone/PocketBeagle from SD card

1. Download the special mikroBUS/Greybus BeagleBoard.org Debian image from here.
2. Load this image to a microSD card using a tool like Etcher.
3. Insert the microSD card into the Green Gateway.
4. Power the Green Gateway via the 12V barrel jack.
5. Use Ethernet via a cable or WiFi via connmanctl for an Internet connection.

jadonk

Using Linux, Zephyr & Greybus for IoT - Post Plumbers Publication

• Plumbers Recap
• Greybus for IoT
• What Are The Key Values in Greybus for IoT?
  • Discoverability
  • Keep the Intelligence in the Host
  • Standard Communication Protocols and APIs
• What Next with Greybus for IoT?

• Gbridge

jadonk

/* Work in Progress */

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pinctrl/am33xx.h>
#include <dt-bindings/board/am335x-bbw-bbb-base.h>

/dts-v1/;
/plugin/;

/ {

jadonk

Moving this to https://github.com/jadonk/BlueDonkey

Switched to Buster now, so all this needs updating.

Some useful links:

• https://github.com/spmallick/learnopencv
• https://www.linkedin.com/learning/opencv-for-python-developers?trk=profileNonSelf_d_flagship3_profile_view_base_learningFeedm015%3Aa001_601786_learning
• https://gist.github.com/wroscoe/d7005216ab36cd4fa6ae0a5b428cbc1f#file-manage-py-L263
• http://docs.micropython.org/
• http://docs.openmv.io/library/omv.image.html

jadonk

<Buffer ff ff ff ff ff ff a0 f6 fd 8a e9 1a 08 00 03>
{ h_dest: [ 255, 255, 255, 255, 255, 255 ],
  h_source: [ 160, 246, 253, 138, 233, 26 ],
  h_proto: 2048 }

jadonk

diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 1ddd13c..b9d7919 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -495,6 +495,13 @@ config CHARGER_RT9455
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
 
+config MONITOR_ADC121C021_I2C
+	tristate "ADC121C021 Battery Monitor"

jadonk

#!/bin/sh

# if (a device is currently using 192.168.7.2) then

# Use 192.168.8.x on the host downstream port and slave upstream port

cat <<LOCAL_END >>/etc/network/interfaces
iface eth1 inet static
    address 192.168.8.1
    netmask 255.255.255.252

jadonk

<span style="color: rgb(51, 51, 51); font-family: 'Gotham SSm A', 'Gotham SSm B'; font-size: 30px; line-height: 30px;">Overview<br></span><span style="color: rgb(51, 51, 51); font-family: 'Gotham SSm A', 'Gotham SSm B'; font-size: 14px; line-height: 20px;">In this tutorial, you will learn how to control the color of an RGB LED using a BeagleBone Black (BBB).<br></span><span style="color: rgb(51, 51, 51); font-family: 'Gotham SSm A', 'Gotham SSm B'; font-size: 30px; line-height: 30px;"><img src="https://learn.adafruit.com/system/assets/assets/000/009/503/medium800/beaglebone_overview_web.jpg?1396892026" style="width: 403px;"><br></span><span style="color: rgb(51, 51, 51); font-family: 'Gotham SSm A', 'Gotham SSm B'; font-size: 14px; line-height: 20px;">Because the BBB runs Linux, there are many ways in which it can be programmed. In this tutorial we show how to control the power output of a GPIO pin and hence control the color of an RGB LED using Python.</span><span style="color: rgb(51, 51, 51); font-family: 

jadonk

#!/bin/sh
apt-get install xinput_calibrator
XAUTHORITY=~debian/.Xauthority DISPLAY=:0.0 xinput_calibrator