Skip to content

Instantly share code, notes, and snippets.

@jcasimir
Created July 20, 2011 03:57
Show Gist options
  • Save jcasimir/1094309 to your computer and use it in GitHub Desktop.
Save jcasimir/1094309 to your computer and use it in GitHub Desktop.
Ruby Debugger

Ruby Debugger

Most of the time simple output statements using warn, raise, or a logger will help you find your issue. But sometimes you need the big guns, and that means ruby-debug.

Ruby-Debug

The ruby-debug package has had some rocky times during the transition from Ruby 1.8.7 to 1.9.2 and beyond. But now, finally, the debugger is reliable and usable.

Installation

Assuming you're writing your app in Ruby 1.9 and using Bundler, just add the dependency to your development gems:

group :development do
  gem 'ruby-debug19'
end

If you left off the 19 you would instead get the package for use with 1.8.7 and it's incompatible with 1.9. Note that the debugger relies on native extensions, so you need to have the Ruby headers and compilation tools setup on your system.

Booting

When you start your Rails server or console you have to explicitly enable the debugger. For the server:

rails server --debug

And for the console:

rails console --debug

Now the debugger is loaded. Anywhere we insert breakpoints will trigger it, and auto-reloading is supported like normal.

Interrupting Execution

Wherever you want to inspect execution just add a call to debugger like this:

def create
  @product = Product.new(params[:product])
  debugger
  if @product.save
    #...

If the debugger is not loaded when execution hits the debugger line, there will be a warning in the output log. If it is properly loaded, execution will pause and drop you into the debugger interface. If you're in the middle of a request this console will appear in the window/process where your server is normally outputting it's logging information:

[Timestamp] INFO  WEBrick::HTTPServer#start: pid=78725 port=3000
/path/to/your/app/controllers/products_controller.rb:19
if @product.save
(rdb:2) 

Which can be read like this:

  • Line 1: Normal server startup line
  • Line 2: The line of code containing the call to debugger
  • Line 3: The next line of code pending execution
  • Line 4: The debugger prompt

Now you have incredible power available to you with a few simple commands.

Basic Usage

continue

Say you figure out the issue and you're ready to finish the request. Just issue the continue instruction and execution will keep running from wherever it paused.

quit

Rarely you want to exit the application all together. Quit will halt execution without finishing the request.

list

The list instructions shows the context of the current code, five lines before and four lines after the current execution point.

next

The next instruction will run the following instruction in the current context and move the marker to the next line in that context. Given this controller code:

def create
  @product = Product.new(params[:product])
  debugger
  if @product.save
    redirect_to @product, :notice => "Successfully created product."
    # ...

See how next moves the execution marker:

/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:19
if @product.save
(rdb:2) next
/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:22
render :action => 'new'
(rdb:2) 

It advances from the if @product.save to the redirect_to.

step

The step command, on the other hand, will move the execution marker to the next instruction to be executed even in a called method. Using the same controller code as before, see how step has a different effect:

/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:19
if @product.save
(rdb:2) step
/Users/jcasimir/.rvm/gems/ruby-1.9.2-p290@jsmerchant/gems/activerecord-3.0.9/lib/active_record/transactions.rb:239
rollback_active_record_state! do
(rdb:2) 

Execution has now paused inside the implementation of .save within ActiveRecord. This can be useful if you really want to dig through Rails internals, but for most purposes I find step impractical.

Simple Variables

The debugger executes in the same scope as the debugger instruction, so you can view and manipulate any variables available there. For instance, to see the value of @product:

/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:19
if @product.save
(rdb:8) @product
#<Product id: nil, title: "Apples", price: nil, description: nil, image_url: nil, created_at: nil, updated_at: nil, stock: 0>
(rdb:8) 

Watching Variables with display

Typically when running the debugger you're interested in how a variable changes over a series of instructions. First, let's move the debugger call up one line in our action:

def create
  debugger
  @product = Product.new(params[:product])    
  if @product.save
    #...

I run that code then use the display command like this:

/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:18
@product = Product.new(params[:product])    
(rdb:2) display @product
1: @product = 
(rdb:2) next
1: @product = Apples
/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:19
if @product.save
(rdb:2) next
1: @product = Apples
/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:22
render :action => 'new'
(rdb:2) 
  • In line 3 I tell the debugger to display @product.
  • It will then show a line like #4 for each prompt. You can see @product starts as nil (a blank because the debugger calls .to_s on nil which gives you an empty string).
  • Then after I call next and a value is assigned to @product, the value appears on line 6.
  • Notice that the display persists for later instructions like line 10.
  • NOTE: In this application, Product instances have a to_s that just returns their title attribute, which here causes the display of Apples.

In fact, when you display a variable it will show up for all further debugger calls in that process. So if your server stays running, you'll see variables displayed from a previous request's debugging. Want to stop displaying a variable? Just call undisplay with the number displayed next to the variable. So in this case, I'd see the 1: next to @product and call undisplay 1.

Dropping into IRB

Not satisfied with those options? Just call the irb instruction and the debugger will drop you into a normal IRB console. Use all your normal Ruby functions and tricks, then exit to get back to the debugger. You can continue to invoke other instructions and any data you created/changed in the IRB session is brought back into the debugging session.

References

IDE Support

If using the debugger is rare, then using the debugger in an IDE must be the white elephant of Ruby development. But let's checkout how Rubymine tries to make using the debugger easier.

RubyMine Setup

Load your project normally in RubyMine. When you start the server, look for the "Debug" icon just to the right of the normal green play button. It has a green bug with a light blue arrow.

Click that and you'll be prompted to install ruby-debug-base19x into the system gems and accept it. Try to run again and you'll be prompted to install ruby-debug-ide. Once they're both installed you're ready to go.

Setting Breakpoints

The first thing you want to do is remove any explicit calls to debugger. If execution hits one of those calls while using the IDE debugger, you'll get an error like this:

undefined method `run_init_script' for Debugger:Module

Once those are removed, you can set a breakpoint in RubyMine by left-clicking in the grey gutter to the left of the instruction. A red dot should appear.

Cause the code to run and RubyMine will snatch focus to show you the debugging tab.

Usage

The concepts are the same as the normal debugger.

  • To execute one instruction at a time, like next, click the Step Over button that's two small circles connected by an arrow
  • To drop into any called methods like step, click the Step Into button
  • To continue execution, click the green play button on the left menu
  • To monitor the value of a variable like display, click the [+] in the Watches pane and enter the name of the variable

Overall, I'd say that the RubyMine debugger does some things well but overall feels like a complex solution on top of a complex tool on top of a simple language. It wouldn't be the first tool I deploy to assess a problem.

@millisami
Copy link

I later noticed that in this block of code above:

/Users/jcasimir/Dropbox/Projects/jsmerchant/app/controllers/products_controller.rb:19
if @product.save
(rdb:8) @product
#<Product id: nil, title: "Apples", price: nil, description: nil, image_url: nil, created_at: nil, updated_at: nil, stock: 0>
(rdb:8) 

@Product is displayed. But I've been doing p @product and if I only do @product, I throws warnings/errors. I'd to put p ... always.
Is this just me or have I left something to setup/configure?

@inukshuk
Copy link

millisami, you can enable auto-evaluation like this:

set autoeval on

then everything that is no debugger command is evaluated.

@jcasimir
Copy link
Author

With 1.9.2p290 and ruby-debug19 (0.11.6) it seems autoeval is on by default. Anyone confirm/deny?

@inukshuk
Copy link

I have exactly the same versions installed and autoeval is off by default.

@millisami
Copy link

Oh, but where do I set that? Do I've have to set up everytime I am on the rdb prompt? or some where like .rspec file so that I don't have to set it everytime?

@inukshuk
Copy link

You can set it after you've initialized the debugger. This is how it's done in Rails:

require 'ruby-debug'

::Debugger.start
::Debugger.settings[:autoeval] = true if ::Debugger.respond_to?(:settings)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment