- Credit: mriswithe goo.gl/72VsXo
- FW/SW Link: https://drive.google.com/folderview?id=0ByKYw0Ytlr3adEc1ekNpbXVacW8&usp=drive_web
- Firmware: .bin
- Software: .img
SW Releases 4.x, 5.x, 6.0.x, 6.1.x could be one of the following combos:
- User:
RW
Password:private
- User:
RO
Password:public
SW release 6.2+:
- User:
RW
Password:securepasswd
4.2 -> 5.0 -> 5.09 > 5.1 -> 6.0 -> 6.1 -> 6.2 -> 6.36
Ethernet Routing Switch 5510-48T HW:03 FW:6.0.0.18 SW:v6.3.4.029 BN:29 (c) Avaya Networks
You will have a string like that all over your switch. FW should match mine, that is the latest I am aware of (and what ships with this). SW should match for you 6.2.3.xxx.
You need a TFTP server set up that the switch can access over its management IP. Then you will go down the menus starting at the top:
Configuration -> Edit -> File System
Then in the right window, on the first tab (Config/Image/Diag file)
You will put in the IP address of the TFTP server, then in "ImageFileName" put the full path of the .img file you want to use. So if the file is at the root of the tftp server's available files you just put the filename, for me, it was under a directory or two:
baystack/v634/5xxx_634029s.img
As far as I can tell the image with the s at the end adds SSH support. The one with the one lower number and no "s" doesn't have ssh.
Once you have the filename in the imagefilename slot, then at the bottom, in the "action" section choose dnldImgIfNewer, then apply at the top.
It will warn you of this, but I will say it as well, THIS RESETS YOUR SWITCH!! It will be down for multiple minutes. So if you have iscsi going over this fueling your ESX cluster, it will all eat shit and die. Your switch will download the software image and the lights will go in circles on the modules (actually looks pretty neat). It will take a few minutes. It should reboot and bring up your switch with the new version afterward though.
Hi there!
I hope you can help me. I was happy owner of ERS 5520 24-PWR, until I started to setup some POE cameras on my property. I connected 1st camera, enabled PoE on switch, set priority to Critical and ERS cannot power it correctly :( I was experimenting with settings but no luck so far. My ERS firmware FW:6.0.0.21 SW:v6.3.6.017 BN:17 (seems to be latest).
It looks like ERS constantly trying to power the camera but without luck. I know that is not camera problem because I alsoe tried with Unifi UAP-AC-LR (PoE) and its the same. Camera model: HIKVISION DS-2CD1043G0-I 2.8mm
Please help me.