Programator2

Prerequisites

This guide applies to UEFI systems with GPT drives. It was tested on Windows 10 April 2018 edition, but it should also work on Windows 8 and newer releases (maybe even 7).

The problem

Occurs after an original drive from which the system drive was cloned is connected to the system at boot.

Error code 0xc000000e with message The boot selection failed because a required device is inaccessible.

dhei

Example of LINQ Select and ToDictionary with parallel execution of tasks

var dataSource = new List<object>() { "aaa" , "bbb" };
var tasks = dataSource.Select(async data => new { Key = data.ToString(), Value = await AsyncDoSomething(data.ToString()) });
var results = await Task.WhenAll(tasks);
Dictionary<string, int> dictionary = results.ToDictionary(pair => pair.Key, pair => pair.Value);

Adapted from this Stackoverflow answer.

joepie91

Not all random values are created equal - for security-related code, you need a specific kind of random value.

A summary of this article, if you don't want to read the entire thing:

• Don't use Math.random(). There are extremely few cases where Math.random() is the right answer. Don't use it, unless you've read this entire article, and determined that it's necessary for your case.
• Don't use crypto.getRandomBytes directly. While it's a CSPRNG, it's easy to bias the result when 'transforming' it, such that the output becomes more predictable.
• If you want to generate random tokens or API keys: Use uuid, specifically the uuid.v4() method. Avoid node-uuid - it's not the same package, and doesn't produce reliably secure random values.
• If you want to generate random numbers in a range: Use random-number-csprng.

You should seriously consider reading the entire article, though - it's

ipbastola

Safest way to clean up boot partition - Ubuntu 14.04LTS-x64, Ubuntu 16.04LTS-x64

Reference

Case I: if /boot is not 100% full and apt is working

1. Check the current kernel version

$ uname -r 

snakevil

使用树莓派3B打造超强路由之二：初成

通过第一篇《使用树莓派3B打造超强路由之一：初装》的努力，树莓派3B已经可以作为一台超低能耗、随身携带的开发用服务器来使用了。但这对于目标——打造超强路由而言，才刚刚开始。接下来，我们需要将其打磨成一台基本的无线路由器。

WARNING 本文所有指令均仅供参考，切勿无脑复制粘贴！

application2000

These commands are based on a askubuntu answer http://askubuntu.com/a/581497
To install gcc-6 (gcc-6.1.1), I had to do more stuff as shown below.
USE THOSE COMMANDS AT YOUR OWN RISK. I SHALL NOT BE RESPONSIBLE FOR ANYTHING.
ABSOLUTELY NO WARRANTY.

If you are still reading let's carry on with the code.

sudo apt-get update && \
sudo apt-get install build-essential software-properties-common -y && \
sudo add-apt-repository ppa:ubuntu-toolchain-r/test -y && \

losisli

测试平台：DigitalOcean VPS ubuntu14.04 x64, strongswan5.2.2

运行以下命令请使用root权限

一：安装strongswan

由于ubuntu软件仓库中strongswan版本较低，因此从官网源码编译安装

apt-get install build-essential     #编译环境
aptitude install libgmp10 libgmp3-dev libssl-dev pkg-config libpcsclite-dev libpam0g-dev     #编译所需要的软件

joyrexus

A quick overview of the node.js streams interface with basic examples.

This is based on @brycebaril's presentation, Node.js Streams2 Demystified

Overview

Streams are a first-class construct in Node.js for handling data.

Think of them as as lazy evaluation applied to data.

siygle

var sync = require('child_process').spawnSync;

console.log('start ls');
var ls = sync('ls', ['-lh', '/usr']);
console.log('end ls');

console.log('start grep');
var grep = sync('grep', ['local'], {
    input: ls.stdout
})

naholyr

Sample service script for debianoids

Look at LSB init scripts for more information.

Usage

Copy to /etc/init.d:

# replace "$YOUR_SERVICE_NAME" with your service's name (whenever it's not enough obvious)