-
-
Save jkjung-avt/86b60a7723b97da19f7bfa3cb7d2690e to your computer and use it in GitHub Desktop.
# -------------------------------------------------------- | |
# Camera sample code for Tegra X2/X1 | |
# | |
# This program could capture and display video from | |
# IP CAM, USB webcam, or the Tegra onboard camera. | |
# Refer to the following blog post for how to set up | |
# and run the code: | |
# https://jkjung-avt.github.io/tx2-camera-with-python/ | |
# | |
# Written by JK Jung <jkjung13@gmail.com> | |
# -------------------------------------------------------- | |
import sys | |
import argparse | |
import subprocess | |
import cv2 | |
WINDOW_NAME = 'CameraDemo' | |
def parse_args(): | |
# Parse input arguments | |
desc = 'Capture and display live camera video on Jetson TX2/TX1' | |
parser = argparse.ArgumentParser(description=desc) | |
parser.add_argument('--rtsp', dest='use_rtsp', | |
help='use IP CAM (remember to also set --uri)', | |
action='store_true') | |
parser.add_argument('--uri', dest='rtsp_uri', | |
help='RTSP URI, e.g. rtsp://192.168.1.64:554', | |
default=None, type=str) | |
parser.add_argument('--latency', dest='rtsp_latency', | |
help='latency in ms for RTSP [200]', | |
default=200, type=int) | |
parser.add_argument('--usb', dest='use_usb', | |
help='use USB webcam (remember to also set --vid)', | |
action='store_true') | |
parser.add_argument('--vid', dest='video_dev', | |
help='device # of USB webcam (/dev/video?) [1]', | |
default=1, type=int) | |
parser.add_argument('--width', dest='image_width', | |
help='image width [1920]', | |
default=1920, type=int) | |
parser.add_argument('--height', dest='image_height', | |
help='image height [1080]', | |
default=1080, type=int) | |
args = parser.parse_args() | |
return args | |
def open_cam_rtsp(uri, width, height, latency): | |
gst_str = ('rtspsrc location={} latency={} ! ' | |
'rtph264depay ! h264parse ! omxh264dec ! ' | |
'nvvidconv ! ' | |
'video/x-raw, width=(int){}, height=(int){}, ' | |
'format=(string)BGRx ! ' | |
'videoconvert ! appsink').format(uri, latency, width, height) | |
return cv2.VideoCapture(gst_str, cv2.CAP_GSTREAMER) | |
def open_cam_usb(dev, width, height): | |
# We want to set width and height here, otherwise we could just do: | |
# return cv2.VideoCapture(dev) | |
gst_str = ('v4l2src device=/dev/video{} ! ' | |
'video/x-raw, width=(int){}, height=(int){} ! ' | |
'videoconvert ! appsink').format(dev, width, height) | |
return cv2.VideoCapture(gst_str, cv2.CAP_GSTREAMER) | |
def open_cam_onboard(width, height): | |
gst_elements = str(subprocess.check_output('gst-inspect-1.0')) | |
if 'nvcamerasrc' in gst_elements: | |
# On versions of L4T prior to 28.1, add 'flip-method=2' into gst_str | |
gst_str = ('nvcamerasrc ! ' | |
'video/x-raw(memory:NVMM), ' | |
'width=(int)2592, height=(int)1458, ' | |
'format=(string)I420, framerate=(fraction)30/1 ! ' | |
'nvvidconv ! ' | |
'video/x-raw, width=(int){}, height=(int){}, ' | |
'format=(string)BGRx ! ' | |
'videoconvert ! appsink').format(width, height) | |
elif 'nvarguscamerasrc' in gst_elements: | |
gst_str = ('nvarguscamerasrc ! ' | |
'video/x-raw(memory:NVMM), ' | |
'width=(int)1920, height=(int)1080, ' | |
'format=(string)NV12, framerate=(fraction)30/1 ! ' | |
'nvvidconv flip-method=2 ! ' | |
'video/x-raw, width=(int){}, height=(int){}, ' | |
'format=(string)BGRx ! ' | |
'videoconvert ! appsink').format(width, height) | |
else: | |
raise RuntimeError('onboard camera source not found!') | |
return cv2.VideoCapture(gst_str, cv2.CAP_GSTREAMER) | |
def open_window(width, height): | |
cv2.namedWindow(WINDOW_NAME, cv2.WINDOW_NORMAL) | |
cv2.resizeWindow(WINDOW_NAME, width, height) | |
cv2.moveWindow(WINDOW_NAME, 0, 0) | |
cv2.setWindowTitle(WINDOW_NAME, 'Camera Demo for Jetson TX2/TX1') | |
def read_cam(cap): | |
show_help = True | |
full_scrn = False | |
help_text = '"Esc" to Quit, "H" for Help, "F" to Toggle Fullscreen' | |
font = cv2.FONT_HERSHEY_PLAIN | |
while True: | |
if cv2.getWindowProperty(WINDOW_NAME, 0) < 0: | |
# Check to see if the user has closed the window | |
# If yes, terminate the program | |
break | |
_, img = cap.read() # grab the next image frame from camera | |
if show_help: | |
cv2.putText(img, help_text, (11, 20), font, | |
1.0, (32, 32, 32), 4, cv2.LINE_AA) | |
cv2.putText(img, help_text, (10, 20), font, | |
1.0, (240, 240, 240), 1, cv2.LINE_AA) | |
cv2.imshow(WINDOW_NAME, img) | |
key = cv2.waitKey(10) | |
if key == 27: # ESC key: quit program | |
break | |
elif key == ord('H') or key == ord('h'): # toggle help message | |
show_help = not show_help | |
elif key == ord('F') or key == ord('f'): # toggle fullscreen | |
full_scrn = not full_scrn | |
if full_scrn: | |
cv2.setWindowProperty(WINDOW_NAME, cv2.WND_PROP_FULLSCREEN, | |
cv2.WINDOW_FULLSCREEN) | |
else: | |
cv2.setWindowProperty(WINDOW_NAME, cv2.WND_PROP_FULLSCREEN, | |
cv2.WINDOW_NORMAL) | |
def main(): | |
args = parse_args() | |
print('Called with args:') | |
print(args) | |
print('OpenCV version: {}'.format(cv2.__version__)) | |
if args.use_rtsp: | |
cap = open_cam_rtsp(args.rtsp_uri, | |
args.image_width, | |
args.image_height, | |
args.rtsp_latency) | |
elif args.use_usb: | |
cap = open_cam_usb(args.video_dev, | |
args.image_width, | |
args.image_height) | |
else: # by default, use the Jetson onboard camera | |
cap = open_cam_onboard(args.image_width, | |
args.image_height) | |
if not cap.isOpened(): | |
sys.exit('Failed to open camera!') | |
open_window(args.image_width, args.image_height) | |
read_cam(cap) | |
cap.release() | |
cv2.destroyAllWindows() | |
if __name__ == '__main__': | |
main() |
Hi @jkjung-avt, sorry I couldnt get back to you earlier.
Yes. Please remove "libopencv-dev". (
sudo apt purge libopencv-dev
)Didn't work. Same error. Also did
sudo apt remove libopencv*
which also grabbedlibopencv-python
and uninstalled it, but still the error persists. Any more suggestions?
Hi
@Siraj-Qazi
@jkjung-avt
i just found the solution . it was just gstreamer error you just need to install opencv 3.4.6 for jetson nano .
https://jkjung-avt.github.io/opencv-on-nano/
Hi @jkjung-avt, sorry I couldnt get back to you earlier.
Yes. Please remove "libopencv-dev". (
sudo apt purge libopencv-dev
)Didn't work. Same error. Also did
sudo apt remove libopencv*
which also grabbedlibopencv-python
and uninstalled it, but still the error persists. Any more suggestions?
Hi
@Siraj-Qazi
@jkjung-avt
i just found the solution . it was just gstreamer error you just need to install opencv 3.4.6 for jetson nano .
https://jkjung-avt.github.io/opencv-on-nano/
Oh alright. Will get back as soon as I get time to build this. Thanks @zahidaMassin!
hi is their away to use tegra-cam. py on PC for rtsp streaming? usb camera works... is there an alternative for omxh264dec nvvidcov etc? thx
@han88 You might use "avdec_h264". Reference: https://github.com/jkjung-avt/tensorrt_demos/blob/master/utils/camera.py#L66-L72
elif 'avdec_h264' in gst_elements:
# Otherwise try to use the software decoder 'avdec_h264'
# NOTE: in case resizing images is necessary, try adding
# a 'videoscale' into the pipeline
gst_str = ('rtspsrc location={} latency={} ! '
'rtph264depay ! h264parse ! avdec_h264 ! '
'videoconvert ! appsink').format(uri, latency)
hi thx gives me no more error messages but unfortunately still fails to open the camera now usb too..(worked only ones out of 10 times before...) maybe it's ubuntu 20.04? Can't compile the Yolo examples with Tensorrt 8.0 either...
@han88 i had the same error just try to uinstalll opencv and install it again, use jkjung-avt tutorial to install opencv 3.4.6
https://jkjung-avt.github.io/opencv-on-nano/
Hi,
I am trying to use this script and I got:
python3 tegra_cam.py --usb --vid 0 --rtsp --uri rtsp://10.0.1.5:554
Called with args:
Namespace(image_height=1080, image_width=1920, rtsp_latency=200, rtsp_uri='rtsp://10.0.1.5:554', use_rtsp=True, use_usb=True, video_dev=0)
OpenCV version: 4.5.2
Failed to open camera!
My camera is a UVC USB module (Arducam B0205) which is working just fine, located in /dev/video0.
Any ideas? Thanks.
@gusarg81 Since you are using the USB webcam (/dev/video0), you shouldn't have added "--rtsp --uri rtsp://10.0.1.5:554" in the command line.
Yeah sorry, was a bad pasted here. I was typing in fact without --rtsp and --uri. The problem was opencv installation (fixed).
Also, in my case since the camera supports MJPEG and YUYV, with this script the capture was slow (since YUYV at 1080, captures max 5fps while with MJPEG max is 30fps).
To solve this, I used image/jpeg and jpegdec.
You can write an example. I'm just starting to understand Linux ...
Hi, Is it possible to stream onboard camera output of jetson nano to 2 virtual camera sinks? I tried doing that with:
gst-launch-1.0 -v nvarguscamerasrc ! 'video/x-raw(memory:NVMM), format=NV12, width=1920, height=1080, framerate=30/1' ! nvvidconv ! 'video/x-raw, width=640, height=480, format=I420, framerate=30/1' ! videoconvert ! identity drop-allocation=1 ! 'video/x-raw, width=640, height=480, format=RGB, framerate=30/1' ! v4l2sink device=/dev/video3 v4l2sink device=/dev/video4
but it isn't working. Essentially, I want to mirror my onboard camera stream to device's web browser for which I created 2 virtual camera devices namely /dev/video3 and /dev/video4 but it only streams to a single virtual camera device (this command works in case of single sink)
in case @bhavitvyamalik (or anyone else) is still wondering how to achieve this, you need to use tee and queue:
First create the two devices: sudo modprobe v4l2loopback devices=2
gst-launch-1.0 -v nvarguscamerasrc ! 'video/x-raw(memory:NVMM), format=NV12, width=640, height=480, framerate=30/1' ! nvvidconv ! 'video/x-raw, width=640, height=480, format=I420, framerate=30/1' ! videoconvert ! identity drop-allocation=1 ! 'video/x-raw, width=640, height=480, format=RGB, framerate=30/1' ! tee name=t ! queue ! v4l2sink device=/dev/video1 t. ! queue ! v4l2sink device=/dev/video2
@jkjung-avt : Could you please help me to save the video instead of image?
@niteshgaba Please refer to:
- Tegra Camera Recorder, or
get_video_writer()
in writer.py
@jkjung-avt : Thanks for the links. Do you have any idea about known issues of opencv 4.1.1 with gstreamer. If i run the image capture for 5 seconds in a thread the pipeline closes fine and if ran for a large number of seconds, it just stays and does not closes.
Do you have any idea about known issues of opencv 4.1.1 with gstreamer. If i run the image capture for 5 seconds in a thread the pipeline closes fine and if ran for a large number of seconds, it just stays and does not closes.
Sorry. It does not ring a bell for me.
@jkjung-avt Thanks alot. I'll try to build from source with GStreamer and let you know :)