rrottmann

# Dist-Upgrade Debian 10 Buster to Debian 12 Bookworm
# Debian 10
apt-get -y update
apt-get -y upgrade
apt-get -y full-upgrade

cat > /etc/apt/sources.list <<"EOF"
deb http://deb.debian.org/debian/ bullseye main
deb-src http://deb.debian.org/debian/ bullseye main
deb http://security.debian.org/debian-security stable-security/updates main

HarvsG

blueprint:
  name: Match Outside Colour Temperature Kelvin
  description: When a light turns on or the sun elevation changes match the outside
    colour temperature. It will apply to any bulb that supports color temperature.
    It triggers whenever a bulb turns on, on sun elevation changes and every 5 minutes.
  domain: automation
  input:
    target_lights:
      name: Lights
      description: The primary lights to be controlled

obfischer

set -x

cat karabiner.yaml | ruby -r yaml -r json -e 'puts YAML.load($stdin.read).to_json'  \
  | jq --sort-keys 'del(.definitions)' > karabiner.json

ZenithalHourlyRate

Demo

Xiaomi Redmi 2 with resolution 1280x720 (GUD RGB565 with compression)

9.mp4

10.mp4

baldrailers

Arch Linux ARM on Crostini

I got Arch Linux ARM installed on a Lenovo Chromebook Duet! I mostly used the instructions from the Arch Wiki as reference.

0. Before we begin

osy

Thanks to the work of @agraf, @KhaosT, @imbushuo, and others, we have Virtualization.framework working on M1 Macs. These [changes][1] have been merged with QEMU v5.2.0 RC3 (will rebase once the final release is out) and integrated with UTM, a brand new QEMU frontend designed in SwiftUI for iOS 14 and macOS 11.

Downloads

• UTM
• Windows for ARM
• Windows 10 ARM.utm
• VirtIO Drivers

walkermalling

Setting up NixOs with LUKS encrypted root

Here are my working notes on getting a system up and running.

WARNING: You can run into a hidden problem that will prevent a correct partition setup and /etc/nixos/configuration.nix from working: if you are setting up a UEFI system, then you need to make sure you boot into the NixOS installation from the UEFI partition of the bootable media. You may have to enter your BIOS boot selection menu to verify this. For example, if you setup a NixOS installer image on a flash drive, your BIOS menu may display several boot options from that flash drive: choose the one explicitly labeled with “UEFI”.

References

I used these resources:

bbqtd

Installing tmux-256color for macOS

• macOS 10.15.5
• tmux 3.1b

macOS has ncurses version 5.7 which does not ship the terminfo description for tmux. There're two ways that can help you to solve this problem.

The Fast Blazing Solution

Instead of tmux-256color, use screen-256color which comes with system. Place this command into ~/.tmux.conf or ~/.config/tmux/tmux.conf(for version 3.1 and later):

CMCDragonkai

Linux Kernel Modules for NixOS

You can find what kernel modules are loaded using lsmod.

However some kernel modules are required at stage 1 boot. Basically preloaded in the initial ram disk before switching to the root filesystem. These kernel modules are mostly needed to deal with peripherals, storage devices, filesystems and network devices. You may need to be wary of these required modules:

• sd_mod - SCSI, SATA, and PATA (IDE) devices

mcfrojd

Latest Update 2021-03-06 : New image showing the new "Services" in Home Assistant and got some tips from the comments below.

Credits and thanks: Home Assistant Forum users & Github users: @ocso, @wiphye, @teachingbirds, @tboyce1, @simbesh, @JeffLIrion @ff12 @rebmemer @siaox @DiederikvandenB @Thebuz @clapbr @Finsterclown

---

Start apps on your android device (in the examples below, my Nvidia Shield TV) from Home Assistant

Starts Youtube App

entity_id: media_player.shield
command: >-