Last active
August 29, 2015 14:20
-
-
Save kylemanna/e8d9147ca508bcb93f60 to your computer and use it in GitHub Desktop.
Samsung 840 EVO with new firmware and now with interface errors
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
core:~ ❯❯❯ journalctl | egrep -i '^-- Reboot|Linux version|Logs begin|ata8.*failed command' ⏎ | |
-- Logs begin at Mon 2015-04-27 03:30:00 PDT, end at Sun 2015-05-03 12:13:24 PDT. -- | |
-- Reboot -- | |
-- Reboot -- | |
-- Reboot -- | |
-- Reboot -- | |
May 02 16:45:51 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
-- Reboot -- | |
May 02 16:50:28 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
-- Reboot -- | |
May 02 17:25:39 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
-- Reboot -- | |
May 02 17:27:00 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
-- Reboot -- | |
May 02 17:49:45 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
-- Reboot -- | |
May 02 18:19:45 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
May 02 18:20:46 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 18:21:17 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 18:26:10 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 18:26:10 core.hq kernel: ata8.00: failed command: SEND FPDMA QUEUED | |
May 02 18:26:10 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
-- Reboot -- | |
May 02 21:00:07 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
May 02 21:08:41 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:09:13 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:28:54 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:28:54 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:28:54 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:28:54 core.hq kernel: ata8.00: failed command: SEND FPDMA QUEUED | |
May 02 21:29:25 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:29:25 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:29:25 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:35:52 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:35:52 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 21:35:52 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 22:08:52 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 22:43:01 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 02 22:43:01 core.hq kernel: ata8.00: failed command: READ FPDMA QUEUED | |
May 02 22:44:03 core.hq kernel: ata8.00: failed command: READ FPDMA QUEUED | |
May 02 22:44:03 core.hq kernel: ata8.00: failed command: READ FPDMA QUEUED | |
May 02 22:44:03 core.hq kernel: ata8.00: failed command: READ FPDMA QUEUED | |
May 02 22:44:03 core.hq kernel: ata8.00: failed command: READ FPDMA QUEUED | |
May 02 22:47:55 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
-- Reboot -- | |
-- Reboot -- | |
-- Reboot -- | |
May 03 12:04:24 core.hq kernel: Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015 | |
May 03 12:08:00 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 03 12:08:00 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED | |
May 03 12:08:31 core.hq kernel: ata8.00: failed command: WRITE FPDMA QUEUED |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.578208] ata7: SATA max UDMA/133 abar m512@0xfbeff000 port 0xfbeff100 irq 29 | |
[ 0.578211] ata8: SATA max UDMA/133 abar m512@0xfbeff000 port 0xfbeff180 irq 29 | |
[ 0.581455] ehci-pci 0000:00:1a.0: cache line size of 4 is not supported | |
-- | |
[ 1.063919] scsi 0:0:0:0: Direct-Access ATA ST4000DM000-1F21 CC54 PQ: 0 ANSI: 5 | |
[ 1.065040] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[ 1.065294] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB) | |
-- | |
[ 1.065722] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 1.066905] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1.066985] ata8.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0DB6Q, max UDMA/133 | |
[ 1.066988] ata8.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA | |
[ 1.067156] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1.067215] ata8.00: configured for UDMA/133 | |
[ 1.112966] sda: sda1 | |
-- | |
[ 3.358588] scsi 7:0:0:0: Direct-Access ATA Samsung SSD 840 DB6Q PQ: 0 ANSI: 5 | |
[ 3.359054] sd 7:0:0:0: [sdf] 488397168 512-byte logical blocks: (250 GB/232 GiB) | |
[ 3.359524] sd 7:0:0:0: [sdf] Write Protect is off | |
[ 3.359530] sd 7:0:0:0: [sdf] Mode Sense: 00 3a 00 00 | |
[ 3.359674] sd 7:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA | |
[ 3.362378] sdf: sdf1 sdf2 sdf3 sdf4 | |
[ 3.363571] sd 7:0:0:0: [sdf] Attached SCSI disk | |
[ 3.438240] raid6: sse2x1 5458 MB/s | |
-- | |
[ 3.587901] Btrfs loaded | |
[ 3.590079] BTRFS: device label evo devid 1 transid 28033 /dev/sdf4 | |
[ 3.590388] BTRFS: device label root devid 1 transid 1074344 /dev/sdf2 | |
[ 3.637463] BTRFS info (device sdf2): disk space caching is enabled | |
[ 3.647562] BTRFS: detected SSD devices, enabling SSD mode | |
-- | |
[ 3.818209] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
[ 3.822024] BTRFS info (device sdf2): enabling auto defrag | |
[ 3.822028] BTRFS info (device sdf2): turning on discard | |
[ 3.822030] BTRFS info (device sdf2): disk space caching is enabled | |
[ 3.824060] systemd[1]: Mounted Arbitrary Executable File Formats File System. | |
-- | |
[ 4.382828] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 | |
[ 4.384639] BTRFS info (device sdf4): enabling auto defrag | |
[ 4.384643] BTRFS info (device sdf4): turning on discard | |
[ 4.384644] BTRFS info (device sdf4): disk space caching is enabled | |
[ 4.397379] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). | |
-- | |
[ 4.469431] AES CTR mode by8 optimization enabled | |
[ 4.508584] EXT4-fs (sdf1): mounted filesystem with ordered data mode. Opts: data=ordered | |
[ 4.554893] iTCO_vendor_support: vendor-support=0 | |
-- | |
[ 53.507353] docker0: port 1(veth49f0f84) entered forwarding state | |
[ 64.353103] ata8.00: exception Emask 0x0 SAct 0x10 SErr 0x0 action 0x6 frozen | |
[ 64.353110] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 64.353117] ata8.00: cmd 61/08:20:0d:2e:90/00:00:0e:00:00/40 tag 4 ncq 4096 out | |
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 64.353120] ata8.00: status: { DRDY } | |
[ 64.353125] ata8: hard resetting link | |
[ 64.839699] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[ 64.839905] ata8.00: supports DRM functions and may not be fully accessible | |
[ 64.840233] ata8.00: supports DRM functions and may not be fully accessible | |
[ 64.840298] ata8.00: configured for UDMA/133 | |
[ 64.840303] ata8.00: device reported invalid CHS sector 0 | |
[ 64.840318] ata8: EH complete | |
[ 68.529514] docker0: port 1(veth49f0f84) entered forwarding state | |
[ 96.325318] ata8.00: exception Emask 0x0 SAct 0x8000000 SErr 0x0 action 0x6 frozen | |
[ 96.325327] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 96.325333] ata8.00: cmd 61/08:d8:dd:2b:90/00:00:0e:00:00/40 tag 27 ncq 4096 out | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 96.325337] ata8.00: status: { DRDY } | |
[ 96.325341] ata8: hard resetting link | |
[ 96.811947] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[ 96.812171] ata8.00: supports DRM functions and may not be fully accessible | |
[ 96.812480] ata8.00: supports DRM functions and may not be fully accessible | |
[ 96.812536] ata8.00: configured for UDMA/133 | |
[ 96.812541] ata8.00: device reported invalid CHS sector 0 | |
[ 96.812557] ata8: EH complete | |
[ 1277.278023] ata8.00: exception Emask 0x0 SAct 0xd2 SErr 0x0 action 0x6 frozen | |
[ 1277.278030] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1277.278037] ata8.00: cmd 61/08:08:45:aa:8f/00:00:0e:00:00/40 tag 1 ncq 4096 out | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1277.278040] ata8.00: status: { DRDY } | |
[ 1277.278042] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1277.278048] ata8.00: cmd 61/08:20:85:6e:b1/00:00:0e:00:00/40 tag 4 ncq 4096 out | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1277.278051] ata8.00: status: { DRDY } | |
[ 1277.278053] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1277.278066] ata8.00: cmd 61/68:30:c5:ad:cc/00:00:0c:00:00/40 tag 6 ncq 53248 out | |
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1277.278068] ata8.00: status: { DRDY } | |
[ 1277.278087] ata8.00: failed command: SEND FPDMA QUEUED | |
[ 1277.278091] ata8.00: cmd 64/01:38:00:00:00/00:00:00:00:00/a0 tag 7 ncq 512 out | |
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1277.278093] ata8.00: status: { DRDY } | |
[ 1277.278098] ata8: hard resetting link | |
[ 1277.764687] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[ 1277.764840] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1277.765045] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1277.765094] ata8.00: configured for UDMA/133 | |
[ 1277.765099] ata8.00: device reported invalid CHS sector 0 | |
[ 1277.765101] ata8.00: device reported invalid CHS sector 0 | |
[ 1277.765104] ata8.00: device reported invalid CHS sector 0 | |
[ 1277.765106] ata8.00: device reported invalid CHS sector 0 | |
[ 1277.765134] ata8: EH complete | |
[ 1308.393644] ata8.00: exception Emask 0x0 SAct 0x3800 SErr 0x0 action 0x6 frozen | |
[ 1308.393651] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1308.393658] ata8.00: cmd 61/68:58:c5:ad:cc/00:00:0c:00:00/40 tag 11 ncq 53248 out | |
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1308.393669] ata8.00: status: { DRDY } | |
[ 1308.393671] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1308.393675] ata8.00: cmd 61/08:60:85:6e:b1/00:00:0e:00:00/40 tag 12 ncq 4096 out | |
res 40/00:01:06:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1308.393678] ata8.00: status: { DRDY } | |
[ 1308.393680] ata8.00: failed command: WRITE FPDMA QUEUED | |
[ 1308.393684] ata8.00: cmd 61/08:68:45:aa:8f/00:00:0e:00:00/40 tag 13 ncq 4096 out | |
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) | |
[ 1308.393686] ata8.00: status: { DRDY } | |
[ 1308.393690] ata8: hard resetting link | |
[ 1308.880293] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300) | |
[ 1308.880453] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1308.880688] ata8.00: supports DRM functions and may not be fully accessible | |
[ 1308.880780] ata8.00: configured for UDMA/133 | |
[ 1308.880786] ata8.00: device reported invalid CHS sector 0 | |
[ 1308.880789] ata8.00: device reported invalid CHS sector 0 | |
[ 1308.880810] ata8: EH complete |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Got the exact same one, after updating the firmware as well. Did you get any additional information on this ?