How To Set Up a Raspberry Pi 4 with Archlinux 64-bit (AArch64) and Full Disk Encryption (+SSH unlock), USB Boot (No SD-Card) and btrfs
Written by: XSystem
First published on: 20 Dec 2020
Last updated on: 20 Dec 2020
Lilin Lao lll9p
XSystem252
/ RaspberryPi4Archlinux64EncryptionUSBBootBtrfsGuide.md
Last active
March 31, 2024 17:51
How To Set Up a Raspberry Pi 4 with Archlinux 64-bit (AArch64) and Full Disk Encryption (+SSH unlock), USB Boot (No SD-Card) and btrfs
yeokm1
/ Read-only FS on Arch Linux ARM.md
Last active
August 18, 2023 05:43
Set up Arch Linux ARM on Raspberry Pi to boot from and use a read-only file-system
Unlike your typical computer where you usually shutdown properly, I cannot rely on this during the use of my Raspberry Pi. If the Raspberry Pi is improperly shutdown too many times, data corruption in the file system leading to unbootable SD card may result. So we should use a read-only file system.
Full instructions and explanations are obtained from this link but you can run these commands directly. I modified some of the instructions for personal convenience.
Login with default username: alarm, password: alarm
#Optionally enable root over SSH. The rest of these instructions assume u are in root.