Transfer a file to EC2 SSM instance without using S3 (SSM only)

transfer_ssm_file.sh

# This script will explain how to transfer a file to EC2 using SSM ONLY!

# You will need to have permission to run SSM commands on the target machine and have sudo access as well

# Infos
INSTANCE_ID=i-1234567890
FILE_NAME=the_file.tar.gz

# Step 1: Run command on machine to install netcat and dump from port to filename
# < Start session
aws ssm start-session --target $INSTANCE_ID --document-name
# < (On target machine) :
cd && sudo yum install nc -y && sudo nc -l -p 1234 > the_file.tar.gz

# Step 2: On another shell, open a port-forwarding session from your machine to the target machine
aws ssm start-session --target $INSTANCE_ID --document-name AWS-StartPortForwardingSession --parameters '{"portNumber":["1234"],"localPortNumber":["1234"]}'

# Step 3: On yet another shell, cat the source file into the transfer port on localhost over the tunnel
nc -w 3 127.0.0.1 1234 < the_file.tar.gz

# Step 4: Once the command in step 3 finishes, close all of the other shell sessions. Your file should be on the target now.

That's handy! I had to remove the --document-name on the first start-session call.

similarly, have you tried copying a file from ec2 to your local machine without using s3

Extremely helpful! Thank you for sharing.

Very helpful, thank you Luke ..

Thank helpful

Thanks for your script.
I wanted to download a file from the EC2 instance, so the commands are reversed somewhat.

Step 1: On EC2 instance dump from filename to port

nc -l 1234 < the_file.tar.gz

Step 2: On your machine open a shell, open a port-forwarding session from your machine to the target machine

aws ssm start-session --target $INSTANCE_ID --document-name AWS-StartPortForwardingSession --parameters '{"portNumber":["1234"],"localPortNumber":["1234"]}'

Step 3: On your machine open another shell, use nc to read the data over the tunnel and write to destination file

nc -w 3 localhost 1234 > the_file.tar.gz

Step 4: Once the command in step 3 finishes, close all of the other shell sessions. Your file should be on the destination now.

Same approach but in one script, save the below script into a file and call it like this:

./upload-file 1234 "/local/path/to/the_file" i-xxxxx "/remote/path/to/the_file"

Note, the script is also creating a folder on the remote if it doesn't exist

upload-file

#!/usr/bin/expect

# Set the script to not time out
set timeout -1

# Capture the script arguments
# Port for netcat
set port [lindex $argv 0]
# File to send via netcat
set file_to_send [lindex $argv 1]
# AWS SSM instance ID
set remote_instance_id [lindex $argv 2]
# Remove file name
set remote_file_name [lindex $argv 3]

# Start AWS SSM session on host A and run netcat to listen on a port
spawn aws ssm start-session --target $remote_instance_id
expect {
    -re "sh-.*" {
        send_user "\nAWS SSM session started.\n"
        send "mkdir -p \"\$(dirname \"$remote_file_name\")\" && nc -l -p $port > \"$remote_file_name\"\r"
        send_user "\nNetcat listener started on port $port > $remote_file_name.\n"
    }
}

# Start a background AWS SSM session for port forwarding
spawn bash -c "aws ssm start-session --target $remote_instance_id --document-name AWS-StartPortForwardingSession --parameters '{\"portNumber\":\[\"$port\"\],\"localPortNumber\":\[\"$port\"\]}'"
expect {
    -re "Waiting for connections" {
        send_user "\nPort forwarding session established.\n"
    }
}

# Use netcat to send the file to the port
spawn bash -c "nc localhost $port < \"$file_to_send\""
expect {
    eof {
        send_user "\nFile sent.\n"
    }
}

# Terminate the netcat listener on the remote host
spawn aws ssm start-session --target $remote_instance_id
expect {
    -re "sh-.*" {
        send_user "\nTerminating netcat listener on remote host.\n"
        send "pkill -f 'nc -l -p $port'\r"
    }
}

# Terminate all AWS SSM sessions
send_user "\nClosing all sessions...\n"
exec pkill -f "aws ssm"
send_user "\nAll sessions terminated.\n"

exit

@lukeplausin thanks for the script. But how about security issues? NC sends raw data over the tunnel, any data that passes through could potentially be intercepted if the port forwarding or the session is compromised. EC2 instance has a nc listener running on port 1234 while you're using AWS SSM to forward traffic, having an open port increases the risk of unauthorized access, especially if the security group or other controls are misconfigured. NC does not authenticate the sender, meaning anyone with access to the port could send data if they know the port number and the instance is exposed.