Skip to content

Instantly share code, notes, and snippets.


Matthew Jowett m-jowett

  • United Kingdom
View GitHub Profile
gbaman /
Last active Oct 24, 2020
Simple guide for setting up OTG modes on the Raspberry Pi Zero, the fast way!

Setting up Pi Zero OTG - The quick way (No USB keyboard, mouse, HDMI monitor needed)

More details -

For this method, alongside your Pi Zero, MicroUSB cable and MicroSD card, only an additional computer is required, which can be running Windows (with Bonjour, iTunes or Quicktime installed), Mac OS or Linux (with Avahi Daemon installed, for example Ubuntu has it built in).
1. Flash Raspbian Jessie full or Raspbian Jessie Lite onto the SD card.
2. Once Raspbian is flashed, open up the boot partition (in Windows Explorer, Finder etc) and add to the bottom of the config.txt file dtoverlay=dwc2 on a new line, then save the file.
3. If using a recent release of Jessie (Dec 2016 onwards), then create a new file simply called ssh in the SD card as well. By default SSH i

ArseniyShestakov /
Last active Oct 19, 2020
Current QEMU dual-VM configuration. Thanks to everyone who helped me!

Check it's working

DRI_PRIME=1 glxinfo | grep OpenGL

Unbind AMD GPU from Radeon driver

echo "1002 6719" > /sys/bus/pci/drivers/vfio-pci/new_id echo "0000:01:00.0" > /sys/bus/pci/devices/0000:01:00.0/driver/unbind echo "0000:01:00.0" > /sys/bus/pci/drivers/vfio-pci/bind echo "1002 6719" > /sys/bus/pci/drivers/vfio-pci/remove_id echo "1002 aa80" > /sys/bus/pci/drivers/vfio-pci/new_id echo "0000:01:00.1" > /sys/bus/pci/devices/0000:01:00.1/driver/unbind

You can’t perform that action at this time.