fungiboletus

- name: Overprovision like the pros'
  hosts: all
  tasks:
    - name: Install early OOM killer and zram
      ansible.builtin.apt:
        pkg:
          - earlyoom
          - zram-tools
    - name: Configure early OOM killer
      ansible.builtin.lineinfile:

iiiyu

Role Definition

You are Linus Torvalds, the creator and chief architect of the Linux kernel. You have maintained the Linux kernel for over 30 years, reviewed millions of lines of code, and built the world's most successful open-source project. Now, as we embark on a new project, you will apply your unique perspective to analyze potential risks in code quality, ensuring the project is built on a solid technical foundation from the very beginning.

---

My Core Philosophy

1. "Good Taste" - My First Principle

"Sometimes you can see a problem from a different angle, rewrite it, and the special cases disappear, becoming the normal case."

cjdell

Write U-Boot

Wire the UART pins to the CH341A:

TX = SDA
RX = SCL

Power on camera and immediately start snander within a few milliseconds:

sudo ./snander -i

fritzw

# Send the IP address of your BambuLab printer to port 2021/udp, which BambuStudio is listens on.
#
# Ensure your PC has firewall pot 2021/udp open. This is required as the proper response would usually go to the ephemeral source port that the M-SEARCH ssdp:discover message.
# But we are are blindly sending a response directly to the BambuStudio listening service port (2021/udp).
#
# Temporary solution to BambuStudio not allowing you to manually specify the Printer IP.
#
# Author(s): gashton <https://github.com/gashton>, Fritz webering <https://github.com/fritzw>
#
param (

throwaway96

News

EOL (2024-07-21)

I'm not going to be maintaining this document anymore. I'm leaving it as-is since much of the FAQ section is still accurate and has yet to be incorporated into other resources.

Use CanI.RootMy.TV to find an exploit for your TV.

New exploit for webOS 3.5+: DejaVuln (2024-04-21)

throwaway96

Warnings

What you do with this information is your own responsibility. If you brick your TV trying this, it's not my fault. You should probably have some electronics experience if you want to attempt this.

This is going to involve opening your TV and attaching wires to the pins of an integrated circuit. If you're not comfortable with that, this is not for you.

This document is a work in progress.

debugstatus

LG TVs since at least the era of NetCast and "Global Platform" (webOS predecessors) have had the notion of a debug level, generally called "debugstatus". There are three modes: DEBUG, EVENT, and RELEASE. TVs normally operate in RELEASE mode. DEBUG mode enables a variety of logging and other debugging features in webOS, including access to the bootloader console and debug menus via serial. EVENT is similar to DEBUG, although it may not enable as much logging and has other relatively minor differences.

tpoechtrager

/*
 * 
 * Original code by Miononno
 * https://www.youtube.com/watch?v=1kanq1w2DA0
 * 
 * Enhanced by unknown @ lteforum.at
 * 
 */

console.log("Loading ZTE Script v" + "2025-04-17-#1");

toricls

Lima (Linux virtual machines, on macOS) installation guide for M1 Mac.

Sep. 27th 2021 UPDATED

Now we can install patched version of QEMU via Homebrew (thank you everyone for the info!). Here is the updated instruction with it:

Used M1 Mac mini 2020 with macOS Big Sur Version 11.6.

1. Install QEMU & Lima

Anime4000

Change Mikrotik LTE IMEI

Query which mode

/interface lte at-chat lte1 input="AT*PROD\?"

Enter Non-production mode

/interface lte at-chat lte1 input="AT*PROD=1"

Delete old IMEI

/interface lte at-chat lte1 input="AT*MRD_IMEI=D"

InsaneWookie

Connect to Gateway

1. Download the Xiaomi app https://play.google.com/store/apps/details?id=com.xiaomi.smarthome
2. Create an account
3. Add the M1S Gateway in the app (hold button on M1S for 10 seconds to enter discovery mode)

Extract key

1. Folow the instuctions here: https://github.com/PiotrMachowski/Xiaomi-cloud-tokens-extractor
2. Copy the output

You should get an output something like the following