Setup auto mapping of the Torso Electronics T-1 in Ableton Live using UserConfiguration.txt

howto

0. On the Torso Electronics T-1, set a track in CC mode. See the manual for more information on this.
1. Copy this UserConfiguration.txt into the following directory
	Windows → C:\Users\[Username]\AppData\Roaming\Ableton\[Live x.x.x]\Preferences\User Remote Scripts\T1
	Mac →HD/Users/[Username]/Library/Preferences/Ableton/[Live x.x.x]>User Remote Scripts/T1
2. Restart Ableton
3. Go to preferences -> Link/Tempo/Midi
4. Setup the T1 controller:
	1. Under control surface choose the name you chose for the folder in the User Remote Scripts directory
	2. Under input choose the name of your controller
	3. Under output choose the name of your controller

Now, add any device to your tracks and move the encoders. The focused device will have all 12 encoders automatically mapped to it.

UserConfiguration.txt

# ======================================================
# Config File for User-defined InstantMappings
# ======================================================

[Globals]
# The primary MIDI channel that the controller uses in
# the range of 0-15.
GlobalChannel: -1

# ======================================================
# Control Settings Information
# ======================================================

# The settings below allow you to control various
# features in Live via MIDI messages that your
# controller sends.

# Aside from the PadxNote features where Note numbers
# are assigned, all other features expect CCs. CCs and
# Note numbers are counted from 0-127.

# For the most part, CCs and Notes are expected to be
# sent on the GlobalChannel.  However, it is possible
# to specify a different channel for some features such
# as EncoderChannelx.  In those cases, if the channel is
# left at -1, the GlobalChannel will be used. Channels
# are counted from 0-15.

# Aside from buttons used for MixerControl, buttons on
# your controller are expected to not be toggles (i.e.,
# sending value 0 every second time you press it).

# Finally, for some features, you can specify the map
# mode of the MIDI message(s) assigned to the feature.
# The following map modes are available:
# - Absolute
# - Absolute14Bit
# - LinearSignedBit
# - LinearSignedBit2
# - LinearTwoCompliment
# - LinearBinaryOffset
# - AccelSignedBit
# - AccelSignedBit2
# - AccelTwoCompliment
# - AccelBinaryOffset

# For faders and knobs with a fixed range, you will
# use Absolute or Absolute14Bit.  For endless encoders,
# you will use one of the other modes.  To find out which
# to use, you can:
# - Consult the controller's documentation.
# - Review section 27.2.4 of Live's manual:
#   https://www.ableton.com/en/manual/midi-and-key-remote-control/
# - Try the various modes to see which works best for you.

# ======================================================

# The Pad settings below allow you to assign Note
# numbers that will be used to play the visible pads in
# Drum Racks.  The arrangement of the Pads is as
# follows:
#   1     2     3     4
#   5     6     7     8
#   9    10    11    12
#  13    14    15    16

Pad1Note: -1
Pad2Note: -1
Pad3Note: -1
Pad4Note: -1
Pad5Note: -1
Pad6Note: -1
Pad7Note: -1
Pad8Note: -1
Pad9Note: -1
Pad10Note: -1
Pad11Note: -1
Pad12Note: -1
Pad13Note: -1
Pad14Note: -1
Pad15Note: -1
Pad16Note: -1
Pad1Channel: -1
Pad2Channel: -1
Pad3Channel: -1
Pad4Channel: -1
Pad5Channel: -1
Pad6Channel: -1
Pad7Channel: -1
Pad8Channel: -1
Pad9Channel: -1
Pad10Channel: -1
Pad11Channel: -1
Pad12Channel: -1
Pad13Channel: -1
Pad14Channel: -1
Pad15Channel: -1
Pad16Channel: -1

# ======================================================

[DeviceControls]
# The settings below apply to the Device that is selected
# in Live.

# Encoder1-Encoder16 control up to 16 Device parameters
# at a time.  The number of Encoders used here determines
# how the bank buttons described further down will work.
# If 8 or less Encoders are used, the bank buttons will
# select one bank of 8 parameters for the Encoders to
# control.  If 9 or more Encoders are used, the bank
# buttons will select two banks of 8 parameters for the
# Encoders to control.
Encoder1: 70
Encoder2: 71
Encoder3: 72
Encoder4: 73
Encoder5: 74
Encoder6: 75
Encoder7: 76
Encoder8: 77
Encoder9: 78
Encoder10: 79
Encoder11: 80
Encoder12: 81
Encoder13: 82
Encoder14: 83
Encoder15: -1
Encoder16: -1
EncoderChannel1: -1
EncoderChannel2: -1
EncoderChannel3: -1
EncoderChannel4: -1
EncoderChannel5: -1
EncoderChannel6: -1
EncoderChannel7: -1
EncoderChannel8: -1
EncoderChannel9: -1
EncoderChannel10: -1
EncoderChannel11: -1
EncoderChannel12: -1
EncoderChannel13: -1
EncoderChannel14: -1
EncoderChannel15: -1
EncoderChannel16: -1
EncoderMapMode: Absolute

# Bank1Button-Bank8Button directly select the bank(s) of
# Device parameters for the Encoders to control.
Bank1Button: -1
Bank2Button: -1
Bank3Button: -1
Bank4Button: -1
Bank5Button: -1
Bank6Button: -1
Bank7Button: -1
Bank8Button: -1

# NextBankButton and PrevBankButton select the next or
# previous bank(s) of Device parameters for the Encoders
# to control.
NextBankButton: -1
PrevBankButton: -1

# OnOffButton toggles the Device Activator switch.
OnOffButton: -1

# LockButton locks the other DeviceControls to the
# currently selected Device.
LockButton: -1

# ======================================================

[MixerControls]
# The settings below allow you to control various Mixer
# features of 8 Tracks at a time.

# VolumeSlider1-VolumeSlider8 control Track volume.
VolumeSlider1: -1
VolumeSlider2: -1
VolumeSlider3: -1
VolumeSlider4: -1
VolumeSlider5: -1
VolumeSlider6: -1
VolumeSlider7: -1
VolumeSlider8: -1
Slider1Channel: -1
Slider2Channel: -1
Slider3Channel: -1
Slider4Channel: -1
Slider5Channel: -1
Slider6Channel: -1
Slider7Channel: -1
Slider8Channel: -1

# Send1Knob1-Send1Knob8 control Track Send A.
Send1Knob1: -1
Send1Knob2: -1
Send1Knob3: -1
Send1Knob4: -1
Send1Knob5: -1
Send1Knob6: -1
Send1Knob7: -1
Send1Knob8: -1

# Send2Knob1-Send2Knob8 control Track Send B.
Send2Knob1: -1
Send2Knob2: -1
Send2Knob3: -1
Send2Knob4: -1
Send2Knob5: -1
Send2Knob6: -1
Send2Knob7: -1
Send2Knob8: -1

# TrackMuteButton1-TrackMuteButton8 control Track muting.
TrackMuteButton1: -1
TrackMuteButton2: -1
TrackMuteButton3: -1
TrackMuteButton4: -1
TrackMuteButton5: -1
TrackMuteButton6: -1
TrackMuteButton7: -1
TrackMuteButton8: -1

# InvertMuteButtonFeedback specifies whether feedback sent
# to TrackMuteButtons will be inverted (True) or not (False).
# When inverted, an on value will be sent when a Track is not
# muted and off value will be sent when a Track is muted.
InvertMuteButtonFeedback: True

# TrackSoloButton1-TrackSoloButton8 control Track soloing.
TrackSoloButton1: -1
TrackSoloButton2: -1
TrackSoloButton3: -1
TrackSoloButton4: -1
TrackSoloButton5: -1
TrackSoloButton6: -1
TrackSoloButton7: -1
TrackSoloButton8: -1

# TrackSelectButton1-TrackSelectButton8 select Tracks.
TrackSelectButton1: -1
TrackSelectButton2: -1
TrackSelectButton3: -1
TrackSelectButton4: -1
TrackSelectButton5: -1
TrackSelectButton6: -1
TrackSelectButton7: -1
TrackSelectButton8: -1

# TrackArmButton1-TrackArmButton8 control Track arming.
TrackArmButton1: -1
TrackArmButton2: -1
TrackArmButton3: -1
TrackArmButton4: -1
TrackArmButton5: -1
TrackArmButton6: -1
TrackArmButton7: -1
TrackArmButton8: -1

# NextBankButton and PrevBankButton select the next or
# previous bank of 8 Tracks for the controls above to
# control.
NextBankButton: -1
PrevBankButton: -1

# MasterVolumeSlider controls Master Track volume.
MasterVolumeSlider: -1
MasterSliderChannel: -1

# CueVolumeSlider controls Cue/Preview volume.
CueVolumeSlider: -1
CueSliderChannel: -1

# CrossfaderSlider controls the Crossfader.
CrossfaderSlider: -1
CrossfaderSliderChannel: -1
CrossfaderMapMode: Absolute

# VolumeMapMode specifies the map mode to use for all
# volume controls.
VolumeMapMode: Absolute

# SendsMapMode specifies the map mode to use for all
# send controls.
SendsMapMode: Absolute

# MixerButtonsToggle specifies whether the buttons in
# this section are toggles (True) or momentary (False).
MixerButtonsToggle: False

# ======================================================

[TransportControls]
# The settings below allow you to control various
# transport-related features.

# StopButton stops playback.
StopButton: -1

# PlayButton starts playback.
PlayButton: -1

# RecButton toggles Arrangement Record.
RecButton: -1

# SessionRecButton toggles Session Record.
SessionRecButton: -1

# OverButton toggles Arrangement Overdub.
OverButton: -1

# MetroButton toggles the Metronome.
MetroButton: -1

# LoopButton toggles the Arrangement Loop.
LoopButton: -1

# RwdButton rewinds playback.
RwdButton: -1

# FwdButton fast-forwards playback.
FfwdButton: -1

# PunchInButton controls Punch-In.
PunchInButton: -1

# PunchOutButton controls Punch-Out.
PunchOutButton: -1

# NudgeUpButton triggers Phase Nudge Up.
NudgeUpButton: -1

# NudgeDownButton triggers Phase Nudge Down.
NudgeDownButton: -1

# TapTempoButton triggers Tap Tempo.
TapTempoButton: -1