Skip to content

Instantly share code, notes, and snippets.

@maitrungduc1410
Last active August 6, 2024 16:37
Show Gist options
  • Save maitrungduc1410/9c640c61a7871390843af00ae1d8758e to your computer and use it in GitHub Desktop.
Save maitrungduc1410/9c640c61a7871390843af00ae1d8758e to your computer and use it in GitHub Desktop.
Bash scripts to create VOD HLS stream with ffmpeg (Extended version)
#!/usr/bin/env bash
START_TIME=$SECONDS
set -e
echo "-----START GENERATING HLS STREAM-----"
# Usage create-vod-hls.sh SOURCE_FILE [OUTPUT_NAME]
[[ ! "${1}" ]] && echo "Usage: create-vod-hls.sh SOURCE_FILE [OUTPUT_NAME]" && exit 1
# comment/add lines here to control which renditions would be created
renditions=(
# resolution bitrate audio-rate
"426x240 400k 128k"
"640x360 800k 128k"
"842x480 1400k 192k"
"1280x720 2800k 192k"
"1920x1080 5000k 256k"
)
segment_target_duration=10 # try to create a new segment every 10 seconds
max_bitrate_ratio=1.07 # maximum accepted bitrate fluctuations
rate_monitor_buffer_ratio=1.5 # maximum buffer size between bitrate conformance checks
#########################################################################
source="${1}"
target="${2}"
if [[ ! "${target}" ]]; then
target="${source##*/}" # leave only last component of path
target="${target%.*}" # strip extension
fi
mkdir -p ${target}
# ----CUSTOM----
sourceResolution="$(ffprobe -v error -select_streams v:0 -show_entries stream=width,height -of csv=s=x:p=0 ${source})"
# echo ${sourceResolution}
arrIN=(${sourceResolution//x/ })
sourceWidth="${arrIN[0]}"
sourceHeight="${arrIN[1]}"
echo ${sourceWidth}
echo ${sourceHeight}
sourceAudioBitRate="$(ffprobe -v error -select_streams a:0 -show_entries stream=bit_rate -of csv=s=x:p=0 ${source})"
sourceAudioBitRateFormatted=$((sourceAudioBitRate / 1000))
# ----END CUSTOM----
key_frames_interval="$(echo `ffprobe ${source} 2>&1 | grep -oE '[[:digit:]]+(.[[:digit:]]+)? fps' | grep -oE '[[:digit:]]+(.[[:digit:]]+)?'`*2 | bc || echo '')"
key_frames_interval=${key_frames_interval:-50}
key_frames_interval=$(echo `printf "%.1f\n" $(bc -l <<<"$key_frames_interval/10")`*10 | bc) # round
key_frames_interval=${key_frames_interval%.*} # truncate to integer
# static parameters that are similar for all renditions
static_params="-c:a aac -ar 48000 -c:v h264 -profile:v main -crf 19 -sc_threshold 0"
static_params+=" -g ${key_frames_interval} -keyint_min ${key_frames_interval} -hls_time ${segment_target_duration}"
static_params+=" -hls_playlist_type vod"
# misc params
misc_params="-hide_banner -y"
master_playlist="#EXTM3U
#EXT-X-VERSION:3
"
cmd=""
resolutionValid=0
prevHeight=0
for rendition in "${renditions[@]}"; do
# drop extraneous spaces
rendition="${rendition/[[:space:]]+/ }"
# rendition fields
resolution="$(echo ${rendition} | cut -d ' ' -f 1)"
bitrate="$(echo ${rendition} | cut -d ' ' -f 2)"
audiorate="$(echo ${rendition} | cut -d ' ' -f 3)"
audioBitRateFormatted=${audiorate%?} # remove "k" at the last index
# take highest possible audio bit rate
if [ $audioBitRateFormatted -gt $sourceAudioBitRateFormatted ]; then
audiorate=${sourceAudioBitRateFormatted}k
fi
# calculated fields
width="$(echo ${resolution} | grep -oE '^[[:digit:]]+')"
height="$(echo ${resolution} | grep -oE '[[:digit:]]+$')"
maxrate="$(echo "`echo ${bitrate} | grep -oE '[[:digit:]]+'`*${max_bitrate_ratio}" | bc)"
bufsize="$(echo "`echo ${bitrate} | grep -oE '[[:digit:]]+'`*${rate_monitor_buffer_ratio}" | bc)"
bandwidth="$(echo ${bitrate} | grep -oE '[[:digit:]]+')000"
name="${height}p"
if [ $sourceHeight -le $prevHeight ]; then
echo "video source has height smaller than output height (${height})"
break
fi
widthParam=0
heightParam=0
if [ $(((width / sourceWidth) * sourceHeight)) -gt $height ]; then
widthParam=-2
heightParam=$height
else
widthParam=$width
heightParam=-2
fi
cmd+=" ${static_params} -vf scale=w=${widthParam}:h=${heightParam}"
cmd+=" -b:v ${bitrate} -maxrate ${maxrate%.*}k -bufsize ${bufsize%.*}k -b:a ${audiorate}"
cmd+=" -hls_segment_filename ${target}/${name}_%03d.ts ${target}/${name}.m3u8"
# add rendition entry in the master playlist
master_playlist+="#EXT-X-STREAM-INF:BANDWIDTH=${bandwidth},RESOLUTION=${resolution}\n${name}.m3u8\n"
resolutionValid=1
prevHeight=${height}
done
if [ $resolutionValid -eq 1 ]; then
# start conversion
echo -e "Executing command:\nffmpeg ${misc_params} -i ${source} ${cmd}\n"
ffmpeg ${misc_params} -i ${source} ${cmd}
# create master playlist file
echo -e "${master_playlist}" > ${target}/playlist.m3u8
echo "Done - encoded HLS is at ${target}/"
else
echo "Video source is too small"
exit 1
fi
ELAPSED_TIME=$(($SECONDS - $START_TIME))
echo "Elapsed time: ${ELAPSED_TIME}"
echo "-----FINISH GENERATING HLS STREAM-----"
@kutanoor
Copy link

I have a mkv video with multiple audio tracks one is in English and other in hindi. When i use this coe it works perfectly and convert videos in to multiple quality playlist but the problem is the output playlist contains only one audio track. Can you please assist me to how can i get all audio tracks from my original mkv file to converted m3u8 playlist

This answer seems what you're looking for. The idea is quite simple:

  • Step 1: generate HLS
  • Step 2: generate audio track 1
  • Step 3: generate audio track 2
  • ....
  • Step n: generate audio track (n - 1)

Thats great. Thank you for your help.btw can you add this in this fork on next uodate? It will help many peoples.

`m```

Copy link

ghost commented Jul 24, 2021

@maitrungduc1410

Hey, nice script (I guess). But why do I always see "WEBVTT" inside my .vtt files ?
I would expect to see my subtitle here. at least the input source has a subtitle in tx3g embedded format.

Would be awesome to have a version of the script that simply processes every track within the mp4 container and adds it to the HLS stream ... Why not have all streams and audio tracks?! Another thing is Stero and 5.1 sound. any idea how to implement that?

thanks in advance

@xbnahsan
Copy link

I have a mkv video with multiple audio tracks one is in English and other in hindi. When i use this coe it works perfectly and convert videos in to multiple quality playlist but the problem is the output playlist contains only one audio track. Can you please assist me to how can i get all audio tracks from my original mkv file to converted m3u8 playlist

This answer seems what you're looking for. The idea is quite simple:

  • Step 1: generate HLS
  • Step 2: generate audio track 1
  • Step 3: generate audio track 2
  • ....
  • Step n: generate audio track (n - 1)

Thats great. Thank you for your help.btw can you add this in this fork on next uodate? It will help many peoples.

`m```

Can you please share how you do that. I need it badly but am unable to figure it out. and what about subtitles? Please share

@JohnTrabusca
Copy link

Thanks for putting this out. I'm currently working on a nodejs project that use dustjs as the templating engine, how do i generate hls manifest and dash manifest using the nodejs exec command to run shell script within a docker container?

Here's my simple video transcoder server that's uses NodeJS (Express + Multer) and generate HLS using exec command, the project is dockerized and can run with Docker.

You'll need an Azure storage account in order to run but you may modify my code to remove that part if not needed

Hey there, do you plan in doing a version that is S3 compatible ? Thank you and really appreciate this script you wrote.

@maitrungduc1410
Copy link
Author

maitrungduc1410 commented Aug 13, 2021

@JohnTrabusca

I'm not having much time at the moment to make an S3 version for the server, you need to do it yourself. All you have to do is updating queue.js file, line 53 and 54: https://gitlab.com/maitrungduc1410/video-transcode-server/-/blob/master/queue.js#L54

You replace the content with something like this:

// declare these on top of queue.js
const { S3 } = require('aws-sdk')
const { createReadStream } = require('fs')
const s3 = new S3({
  endpoint: 'some endpoint',
  accessKeyId: 'accessKeyId',
  secretAccessKey: 'secretAccessKey',
});

// below is content for line 53 and 54
const uploadParams = {
  Bucket: 'some bucket',
  Key: file,
  Body: createReadStream(filepath),
  ACL: "public-read",
};

const data = await s3.upload(uploadParams).promise()

@JohnTrabusca
Copy link

@JohnTrabusca

I'm not having much time to make an S3 version for the server, you need to do it yourself. All you have to do is updating queue.js file, line 53 and 54: https://gitlab.com/maitrungduc1410/video-transcode-server/-/blob/master/queue.js#L54

You replace the content with something like this:

// declare these on top of queue.js
const { S3 } = require('aws-sdk')
const { createReadStream } = require('fs')
const s3 = new S3({
  endpoint: 'some endpoint',
  accessKeyId: 'accessKeyId',
  secretAccessKey: 'secretAccessKey',
});

// below is content for line 53 and 54
const uploadParams = {
  Bucket: 'some bucket',
  Key: file,
  Body: createReadStream(filepath),
  ACL: "public-read",
};

const data = await s3.upload(uploadParams).promise()

Really appreciate the fast response, I will try to make this modifications. Really appreciate it :)

@maitrungduc1410
Copy link
Author

@JohnTrabusca you're welcome :)

@JohnTrabusca
Copy link

JohnTrabusca commented Aug 13, 2021

@maitrungduc1410 I'm facing an issue where multer seems not to be saving the file. I'm running the app with pm2 and here's the error:

0|Encoder  | /home/encoder/video_transcode/storage/uploads/outputProcess_1d72f6b8f33c7e8069a360c3_1628878083521.mp4 storage/outputs/test-ppppp-80bee0336fd6dc147f863d731628878083716
0|Encoder  | JobID 5 has started
0|Encoder  | -----START GENERATING HLS STREAM-----
0|Encoder  | /home/encoder/video_transcode/storage/uploads/outputProcess_1d72f6b8f33c7e8069a360c3_1628878083521.mp4: No such file or directory
0|Encoder  | JobID 5 Failed
0|Encoder  | Error: Error when generating HLS stream!
0|Encoder  |     at ChildProcess.<anonymous> (/home/encoder/video_transcode/hls.js:21:16)
0|Encoder  |     at ChildProcess.emit (events.js:400:28)
0|Encoder  |     at Process.ChildProcess._handle.onexit (internal/child_process.js:277:12)

What could be causing this ? I already set storage at 755 with Recursive and the files are own by the account I created not root.

Thanks in Advance.

EDIT:

The files does reach the server via POST

0|Encoder  | {
0|Encoder  |   fieldname: 'file',
0|Encoder  |   originalname: 'sample_1280x720_surfing_with_audio.mp4',
0|Encoder  |   encoding: '7bit',
0|Encoder  |   mimetype: 'video/mp4',
0|Encoder  |   destination: './storage/uploads/',
0|Encoder  |   filename: 'cf4eebbc6931ea7bdc960a66_1628884364395.mp4',
0|Encoder  |   path: 'storage/uploads/cf4eebbc6931ea7bdc960a66_1628884364395.mp4',
0|Encoder  |   size: 71753110
0|Encoder  | }

Fixed the issue, wasn't feeding the right mp4 to Generate since I had removed preprocessing.

@fivethreeo
Copy link

Had a issue with this script because I use a charset with comma separator.

Fixed it like this:

key_frames_interval="$(echo `ffprobe ${source} 2>&1 | grep -oE '[[:digit:]]+(.[[:digit:]]+)? fps' | grep -oE '[[:digit:]]+(.[[:digit:]]+)?'`*2 | bc || echo '')"
key_frames_interval=${key_frames_interval:-50}
key_frames_interval=${key_frames_interval/,/\.}
key_frames_interval=$(bc -l <<<"$key_frames_interval/10")
key_frames_interval=${key_frames_interval/\./,}
key_frames_interval=$(echo `printf "%.1f\n" ${key_frames_interval}`)
key_frames_interval=${key_frames_interval/,/\.}
key_frames_interval=$(echo ${key_frames_interval}*10| bc) # round)
key_frames_interval=${key_frames_interval%.*} # truncate to integer

@dontfreakout
Copy link

Had a issue with this script because I use a charset with comma separator.

Fixed it like this:

key_frames_interval="$(echo `ffprobe ${source} 2>&1 | grep -oE '[[:digit:]]+(.[[:digit:]]+)? fps' | grep -oE '[[:digit:]]+(.[[:digit:]]+)?'`*2 | bc || echo '')"
key_frames_interval=${key_frames_interval:-50}
key_frames_interval=${key_frames_interval/,/\.}
key_frames_interval=$(bc -l <<<"$key_frames_interval/10")
key_frames_interval=${key_frames_interval/\./,}
key_frames_interval=$(echo `printf "%.1f\n" ${key_frames_interval}`)
key_frames_interval=${key_frames_interval/,/\.}
key_frames_interval=$(echo ${key_frames_interval}*10| bc) # round)
key_frames_interval=${key_frames_interval%.*} # truncate to integer

@fivethreeo there is actually an easier fix, see my comment

@dlobjoie
Copy link

Thanks for this script, it does a really good job.
I'm working on a project where, besides creating the HLS stream, I also want to encrypt it.
I already managed to do it with another ffmpeg script I made, but with this one, I don't see where I could insert the -hls_key_file keyinfo.drm parameter (where keyinfo.drm is a text file that contains my AES128 encryption key). Could you guide me on this ?

@xubmuajkub
Copy link

@dlobjoie This is what I've done for my script. Hope this might help you.

cmd+=" ${static_params} -vf scale=w=${widthParam}:h=${heightParam}"
cmd+=" -b:v ${bitrate} -maxrate ${maxrate%.*}k -bufsize ${bufsize%.*}k -b:a ${audiorate}"
# Add this line for encryption
cmd+=" -hls_key_info_file KEY_INFO_FILE"
cmd+=" -hls_segment_filename ${target}/${name}_%03d.html ${target}/${name}.m3u8"

@dlobjoie
Copy link

@xubmuajkub Thank you very much. I had been looking for a long time.
Did you also automate the addition of the path to the key in the creation of the playlist?
If yes how did you do it?

@xubmuajkub
Copy link

@dlobjoie
Copy link

@dlobjoie Just follow the step they do here https://hlsbook.net/how-to-encrypt-hls-video-with-ffmpeg/

Thanks @xubmuajkub that's where I started my HLS adventure a few months ago :)

@xubmuajkub
Copy link

@dlobjoie in my case, I just want a simple encryption so I only use 1 file for every video.

@AhmedAbouelkher
Copy link

Hi @maitrungduc1410
Thanks for your amazing script.

Is there a way to add FRAME-RATE, CODECS, and AUDIO for every resolution?

@mkammes
Copy link

mkammes commented Oct 23, 2022

In the case where we want multiple renditions at the same frame size - but at different bitrates - the script doesn't account for it, and the m3u8 points to the same manifest file, e.g.
`#EXTM3U
#EXT-X-VERSION:3
#EXT-X-STREAM-INF:BANDWIDTH=400000,RESOLUTION=384x216
216p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=700000,RESOLUTION=512x288
288p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=1100000,RESOLUTION=720x404
404p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=1750000,RESOLUTION=720x404
404p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=2750000,RESOLUTION=1280x720
720p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=3500000,RESOLUTION=1280x720
720p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=4300000,RESOLUTION=1920x1080
1080p.m3u8
#EXT-X-STREAM-INF:BANDWIDTH=5800000,RESOLUTION=1920x1080
1080p.m3u8

`

Is there a way to solve this; perhaps outputting each rendition and playlist in a separate folder?

Thanks!

@maitrungduc1410
Copy link
Author

Hi @maitrungduc1410 Thanks for your amazing script.

Is there a way to add FRAME-RATE, CODECS, and AUDIO for every resolution?

FRAME-RATE: not sure
CODECS: now supported: https://trac.ffmpeg.org/ticket/8904
AUDIO: seems possible: https://stackoverflow.com/questions/60017730/create-hls-streamable-audio-file-from-mp3

@maitrungduc1410
Copy link
Author

In the case where we want multiple renditions at the same frame size - but at different bitrates - the script doesn't account for it, and the m3u8 points to the same manifest file, e.g. `#EXTM3U #EXT-X-VERSION:3 #EXT-X-STREAM-INF:BANDWIDTH=400000,RESOLUTION=384x216 216p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=700000,RESOLUTION=512x288 288p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=1100000,RESOLUTION=720x404 404p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=1750000,RESOLUTION=720x404 404p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=2750000,RESOLUTION=1280x720 720p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=3500000,RESOLUTION=1280x720 720p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=4300000,RESOLUTION=1920x1080 1080p.m3u8 #EXT-X-STREAM-INF:BANDWIDTH=5800000,RESOLUTION=1920x1080 1080p.m3u8

`

Is there a way to solve this; perhaps outputting each rendition and playlist in a separate folder?

Thanks!

my script is only for improving and fixing bugs based on the original script.

for your purpose you may need to write your own logics

@shouvick
Copy link

Encode video not working in some Android Tv specially in Sony Bravia. Tv os version is 7. H.264 codec work on os version 6 or later. But it is not working. Anyone give me more insights ?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment