cellularmitosis

Blog 2020/5/7

<- previous | index | next ->

QEMU PowerPC G4 OS X Tiger (10.4) setup

Here are some notes on how I set up an installation of OS X Tiger (10.4)

blackknight36

[Unit]
Description=Setup Systemd script for Artifactory in Tomcat Servlet Engine
After=network.target

[Service]
Type=forking
GuessMainPID=yes
Restart=always
RestartSec=5
PIDFile=/var/opt/jfrog/run/artifactory.pid

jamieparfet

#!/bin/bash

# This assumes that the ~6GB mojave installer is in the /Applications folder.
# If it's not, just open the App Store, search Mojave, and you can download the installer file from there.

hdiutil create -o /tmp/mojave.cdr -size 6g -layout SPUD -fs HFS+J
hdiutil attach /tmp/mojave.cdr.dmg -noverify -mountpoint /Volumes/install_mojave
sudo /Applications/Install\ macOS\ mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/install_mojave
mv /tmp/mojave.cdr.dmg ~/Desktop/InstallSystem.dmg
hdiutil detach /Volumes/Install\ macOS\ mojave

albertfilice

#####
IF YOU'RE COMING HERE BECAUSE OF PROBLEMS MAKE SURE YOU HAVE THE PROPPER ADAPTER
I tried several adapters and the one from Tripplite works the best. Some don't work at all, others create a lot of gibberish on the VT220.
Link: http://www.amazon.com/gp/product/B0000VYJRY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
#####


1. Installed drivers for USB -> Serial adapter
2. Run ls /dev/tty.* 
    I see my adapter as: '/dev/tty.usbserial'