zvldz

Retrieving the OTA URL for Tuya Zigbee devices

This example is for Ubuntu 20.4.3 x86_64. But should also work on other supported OS.

Used:

• MITM proxy - Charles proxy (but it is probably possible to use another)
• android emulator - Genymotion

Step 1: Installing the Charles proxy

freol35241

# MIT License

# Copyright (c) 2021 freol35241

# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:

zvldz

Soft hack to open telnet

You need gateway 3(mgl03) connected to MiHome. And also ip and gateway token.

1 way (recommended)

Via XiaomiGateway3 component.

You must input in the 'Open Telnet command' field(as it is without changing anything):

{"method":"set_ip_info","params":{"ssid":"\"\"","pswd":"123123 ; passwd -d admin ; echo enable > /sys/class/tty/tty/enable; telnetd"}}

kmdm

# MQTT broker configuration
mqtt:
  broker: !secret mqtt_broker
  username: !secret mqtt_username
  password: !secret mqtt_password
  discovery: False # Only if you use the HA API usually
  id: mqtt_client

# Define the room for this ESP32 node
substitutions:

FrankWu100

[Unit]
Description=fancontrol-gpio

[Service]
Type=simple
ExecStart=/usr/bin/fancontrol-gpio

[Install]
WantedBy=multi-user.target

rsciriano

substitutions:
  devicename: opentherm
  upper_devicename: Opentherm

esphome:
  name: $devicename
  platform: ESP8266
  board: d1_mini_lite
  arduino_version: '2.7.2'  
  platformio_options:

eklex

#
# udev rule
#   Mount USB drive to the media directory using the partition name as mount point
#
# Description:
#   Created for Home Assistant OS, this rule mounts any USB drives
#   into the Hassio media directory (/mnt/data/supervisor/media).
#   When a USB drive is connected to the board, the rule creates one directory
#   per partition under the media directory. The newly created partition is named
#   as the partition name. If the partition does not have a name, then the following

emorydunn

esphome:
  name: led_strip_1
  platform: ESP8266
  board: esp8285
  includes:
    - custom_components/sonoff_l1.h

wifi:
  

patrickdk77

Template
{"NAME":"Tuya Siren","GPIO":[255,107,255,108,255,255,0,0,255,255,255,255,255],"FLAG":0,"BASE":54}

You must activate the template before using any of the tuya commands below.


Recommended rules for tasmota:
rule1 on system#boot backlog tuyasend4 102,0; tuyasend2 103,300; TuyaSend1 117,0 endon
rule1 1
tuyamcu 11,104

francoism90

Warning

Following instructions are provided without any warranty, and may even get you in trouble legally. The instructions are provided for testing, and should be use with care. We (including commentators) are not responsible for any damage to your device(s).

Introduction

This may enable additional channels and power (in most cases don't) on ASUS Merlin provided routers.