Last active
January 4, 2024 11:14
-
-
Save nehamalcom/33608837ab5ad3332ff11a7fa7a602e2 to your computer and use it in GitHub Desktop.
v2: Add support for Dynamic Frequency Scaling (DFS) - J721E
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-gc1c2bdf272 (Nov 30 2023 - 18:17:44 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from MMC2 | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loading Environment from nowhere... OK | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 4.0.0 (gcc version 11.4.0 (GCC)) #1 Fri Oct 20 18:29:31 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-gc1c2bdf272 (Nov 30 2023 - 18:17:44 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from MMC2 | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| U-Boot 2023.04-gc1c2bdf272 (Nov 30 2023 - 18:17:44 +0000) | |
| SoC: J721E SR1.1 GP | |
| Model: Texas Instruments K3 J721E SoC | |
| Board: J721EX-PM2-SOM rev A | |
| DRAM: 4 GiB | |
| Core: 124 devices, 36 uclasses, devicetree: separate | |
| Flash: 64 MiB | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Detected: J7X-BASE-CPB rev A | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| cdns,sierra serdes@5000000: sierra probed | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 1 0 | |
| switch to partitions #0, OK | |
| mmc1 is current device | |
| SD/MMC found on device 1 | |
| Failed to load 'boot.scr' | |
| 574 bytes read in 26 ms (21.5 KiB/s) | |
| Loaded env from uEnv.txt | |
| Importing environment from mmc1 ... | |
| gpio: pin gpio@22_17 (gpio 281) value is 1 | |
| gpio: pin gpio@22_16 (gpio 280) value is 0 | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 88152 bytes read in 32 ms (2.6 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 88152 bytes: Success! | |
| 88152 bytes read in 32 ms (2.6 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 88152 bytes: Success! | |
| 88152 bytes read in 32 ms (2.6 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 88152 bytes: Success! | |
| 88152 bytes read in 32 ms (2.6 MiB/s) | |
| Load Remote Processor 4 with data@addr=0x82000000 88152 bytes: Success! | |
| 88152 bytes read in 33 ms (2.5 MiB/s) | |
| Load Remote Processor 5 with data@addr=0x82000000 88152 bytes: Success! | |
| 145604 bytes read in 33 ms (4.2 MiB/s) | |
| Load Remote Processor 6 with data@addr=0x82000000 145604 bytes: Success! | |
| 145604 bytes read in 34 ms (4.1 MiB/s) | |
| Load Remote Processor 7 with data@addr=0x82000000 145604 bytes: Success! | |
| 10489000 bytes read in 40 ms (250.1 MiB/s) | |
| Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success! | |
| 43012608 bytes read in 913 ms (44.9 MiB/s) | |
| 117969 bytes read in 31 ms (3.6 MiB/s) | |
| Working FDT set to 88000000 | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008fee0000, end 000000008fffffff ... OK | |
| Working FDT set to 8fee0000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc5-next-20231214-00001-g07739cb51c1d (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP PREEMPT Thu Jan 4 15:54:17 IST 2024 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J721e EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0x8ff7d39c0-0x8ff7d5fff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] | |
| [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s50728 r8192 d31192 u90112 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 root=PARTUUID=45305cc1-02 rw rootfstype=ext4 rootwait | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Fallback order for Node 0: 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] Policy zone: Normal | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) | |
| [ 0.000000] Memory: 3771496K/4194304K available (16768K kernel code, 4500K rwdata, 10992K rodata, 9600K init, 608K bss, 390040K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.009127] Console: colour dummy device 80x25 | |
| [ 0.013708] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.024380] pid_max: default: 32768 minimum: 301 | |
| [ 0.029127] LSM: initializing lsm=capability,integrity | |
| [ 0.034430] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.042002] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.050852] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.058111] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.065966] rcu: Hierarchical SRCU implementation. | |
| [ 0.070862] rcu: Max phase no-delay instances is 1000. | |
| [ 0.076380] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.082620] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091949] fsl-mc MSI: msi-controller@1820000 domain created | |
| [ 0.099338] EFI services will not be available. | |
| [ 0.104070] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| [ 0.117264] Detected PIPT I-cache on CPU1 | |
| [ 0.117310] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.117323] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.117356] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.117408] smp: Brought up 1 node, 2 CPUs | |
| [ 0.146753] SMP: Total of 2 processors activated. | |
| [ 0.151557] CPU: All CPU(s) started at EL2 | |
| [ 0.155756] CPU features: detected: 32-bit EL0 Support | |
| [ 0.161005] CPU features: detected: 32-bit EL1 Support | |
| [ 0.166253] CPU features: detected: CRC32 instructions | |
| [ 0.171517] alternatives: applying system-wide alternatives | |
| [ 0.178245] devtmpfs: initialized | |
| [ 0.188443] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.198424] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.205899] pinctrl core: initialized pinctrl subsystem | |
| [ 0.212867] DMI not present or invalid. | |
| [ 0.217388] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.223850] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.231160] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.239201] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.247315] audit: initializing netlink subsys (disabled) | |
| [ 0.252916] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.253762] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.260844] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.267016] cpuidle: using governor menu | |
| [ 0.277797] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.284763] ASID allocator initialised with 65536 entries | |
| [ 0.291443] Serial: AMBA PL011 UART driver | |
| [ 0.313717] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@0/endpoint | |
| [ 0.328342] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@4/endpoint | |
| [ 0.339115] Modules: 22096 pages in range for non-PLT usage | |
| [ 0.339119] Modules: 513616 pages in range for PLT usage | |
| [ 0.345281] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.357641] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.364044] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.370978] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.377379] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.384313] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.390715] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.397648] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.405086] ACPI: Interpreter disabled. | |
| [ 0.410837] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.1 JTAGID[0x1bb6402f] Detected | |
| [ 0.419999] iommu: Default domain type: Translated | |
| [ 0.424902] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.431367] SCSI subsystem initialized | |
| [ 0.435363] usbcore: registered new interface driver usbfs | |
| [ 0.440984] usbcore: registered new interface driver hub | |
| [ 0.446422] usbcore: registered new device driver usb | |
| [ 0.452388] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.457462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.466800] PTP clock support registered | |
| [ 0.470910] EDAC MC: Ver: 3.0.0 | |
| [ 0.474578] scmi_core: SCMI protocol bus registered | |
| [ 0.480307] FPGA manager framework | |
| [ 0.483827] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.490542] vgaarb: loaded | |
| [ 0.493705] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.500068] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.504090] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.511203] pnp: PnP ACPI: disabled | |
| [ 0.517832] NET: Registered PF_INET protocol family | |
| [ 0.522955] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.531913] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.540686] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.548610] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.556811] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.565349] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.572120] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.579046] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.586485] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.592564] RPC: Registered named UNIX socket transport module. | |
| [ 0.598621] RPC: Registered udp transport module. | |
| [ 0.603424] RPC: Registered tcp transport module. | |
| [ 0.608227] RPC: Registered tcp-with-tls transport module. | |
| [ 0.613829] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.620417] PCI: CLS 0 bytes, default 64 | |
| [ 0.624605] kvm [1]: IPA Size Limit: 44 bits | |
| [ 0.629860] kvm [1]: vgic-v2@6f020000 | |
| [ 0.633612] kvm [1]: GIC system register CPU interface enabled | |
| [ 0.639592] kvm [1]: vgic interrupt IRQ9 | |
| [ 0.643611] kvm [1]: Hyp mode initialized successfully | |
| [ 0.649505] Initialise system trusted keyrings | |
| [ 0.654184] workingset: timestamp_bits=42 max_order=20 bucket_order=0 | |
| [ 0.660930] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.667034] NFS: Registering the id_resolver key type | |
| [ 0.672210] Key type id_resolver registered | |
| [ 0.676481] Key type id_legacy registered | |
| [ 0.680582] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.687435] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.695080] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.721921] Key type asymmetric registered | |
| [ 0.726104] Asymmetric key parser 'x509' registered | |
| [ 0.731110] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| [ 0.738669] io scheduler mq-deadline registered | |
| [ 0.743299] io scheduler kyber registered | |
| [ 0.747416] io scheduler bfq registered | |
| [ 0.757873] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 | |
| [ 0.764268] pinctrl-single 11c000.pinctrl: 173 pins, size 692 | |
| [ 0.770603] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.776361] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.787746] EINJ: ACPI disabled. | |
| [ 0.812663] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.821520] msm_serial: driver initialized | |
| [ 0.826002] SuperH (H)SCI(F) driver initialized | |
| [ 0.830771] STM32 USART driver initialized | |
| [ 0.836812] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf) | |
| [ 0.844991] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq | |
| [ 0.852019] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq | |
| [ 0.859689] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs | |
| [ 0.870894] loop: module loaded | |
| [ 0.874953] megasas: 07.727.03.00-rc1 | |
| [ 0.883268] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.889191] thunder_xcv, ver 1.0 | |
| [ 0.892507] thunder_bgx, ver 1.0 | |
| [ 0.895820] nicpf, ver 1.0 | |
| [ 0.899508] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.906892] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.912332] hclge is initializing | |
| [ 0.915735] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.920717] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.926601] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.931671] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.937729] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.943243] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.948943] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.955348] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.961654] sky2: driver version 1.30 | |
| [ 0.966467] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.974058] usbcore: registered new interface driver usb-storage | |
| [ 0.982491] i2c_dev: i2c /dev entries driver | |
| [ 0.992546] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.998896] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.003994] Synopsys Designware Multimedia Card Interface Driver | |
| [ 1.010926] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.018259] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.024935] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.032361] usbcore: registered new interface driver usbhid | |
| [ 1.038063] usbhid: USB HID core driver | |
| [ 1.044580] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 1.054635] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 1.059190] optee: revision 4.0 (2a5b1d12) | |
| [ 1.075629] optee: dynamic shared memory is enabled | |
| [ 1.085225] random: crng init done | |
| [ 1.088761] optee: initialized driver | |
| [ 1.092756] mmio-mux 47000004.mux-controller: failed to get regmap: -19 | |
| [ 1.102011] NET: Registered PF_PACKET protocol family | |
| [ 1.107238] 9pnet: Installing 9P2000 support | |
| [ 1.111632] Key type dns_resolver registered | |
| [ 1.119972] registered taskstats version 1 | |
| [ 1.124214] Loading compiled-in X.509 certificates | |
| [ 1.147060] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.264264] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.270839] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 1.277672] pca953x 1-0020: using no AI | |
| [ 1.302388] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 1.309199] pca953x 1-0022: using AI | |
| [ 1.314011] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.320471] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 1.326905] pca953x 3-0020: supply vcc not found, using dummy regulator | |
| [ 1.333747] pca953x 3-0020: using no AI | |
| [ 1.358197] omap_i2c 2030000.i2c: bus 3 rev0.12 at 400 kHz | |
| [ 1.364637] pca953x 4-0020: supply vcc not found, using dummy regulator | |
| [ 1.371463] pca953x 4-0020: using no AI | |
| [ 1.398024] omap_i2c 2060000.i2c: bus 4 rev0.12 at 400 kHz | |
| [ 1.403985] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 1.412670] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 1.422129] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 1.430848] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created | |
| [ 1.442480] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 | |
| [ 1.452383] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.459146] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.469291] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 | |
| [ 1.479465] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.486224] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.495012] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250 | |
| [ 1.505386] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250 | |
| [ 1.514242] printk: legacy console [ttyS2] enabled | |
| [ 1.514242] printk: legacy console [ttyS2] enabled | |
| [ 1.523919] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.523919] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.539031] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250 | |
| [ 1.548999] 2820000.serial: ttyS0 at MMIO 0x2820000 (irq = 216, base_baud = 3000000) is a 8250 | |
| [ 1.558791] 2840000.serial: ttyS4 at MMIO 0x2840000 (irq = 217, base_baud = 3000000) is a 8250 | |
| [ 1.569308] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.613708] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.623311] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.631589] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.644399] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.651607] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.661535] mmc0: CQHCI version 5.10 | |
| [ 1.673589] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 1.680275] pca953x 2-0020: using no AI | |
| [ 1.702249] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 1.711610] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 1.723302] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) | |
| [ 1.736311] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.781710] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.791250] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.799536] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.799651] mmc0: Command Queue Engine enabled | |
| [ 1.812355] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.816738] mmc0: new HS200 MMC card at address 0001 | |
| [ 1.823937] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.829181] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 1.841956] mmcblk0: p1 | |
| [ 1.844763] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.850318] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.855837] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (234:0) | |
| [ 1.864977] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 1.875591] mmc1: CQHCI version 5.10 | |
| [ 1.877562] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| [ 1.886437] clk: Disabling unused clocks | |
| [ 1.914284] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 1.922993] ALSA device list: | |
| [ 1.925960] No soundcards found. | |
| [ 1.929515] Waiting for root device PARTUUID=45305cc1-02... | |
| [ 1.973428] mmc1: new ultra high speed DDR50 SDHC card at address aaaa | |
| [ 1.980430] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.989108] mmcblk1: p1 p2 | |
| [ 2.095280] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 2.100916] EXT4-fs (mmcblk1p2): mounted filesystem ba312c0b-a677-454c-a9b6-2bcb63cc2491 r/w with ordered data mode. Quota mode: none. | |
| [ 2.113021] VFS: Mounted root (ext4 filesystem) on device 179:98. | |
| [ 2.122581] devtmpfs: mounted | |
| [ 2.130176] Freeing unused kernel memory: 9600K | |
| [ 2.134818] Run /sbin/init as init process | |
| [ 2.349287] systemd[1]: System time before build time, advancing clock. | |
| [ 2.387829] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 2.419763] systemd[1]: Detected architecture arm64. | |
| Welcome to Arago 2023.10! | |
| [ 2.488645] systemd[1]: Hostname set to <j721e-evm>. | |
| [ 2.587571] systemd-sysv-generator[89]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 2.611336] systemd-sysv-generator[89]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 2.638266] systemd-sysv-generator[89]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 2.792357] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 2.801249] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 2.825976] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 2.869566] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 2.921360] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 2.961906] systemd[1]: Created slice Slice /system/getty. | |
| [ OK ] Created slice Slice /system/getty. | |
| [ 2.982980] systemd[1]: Created slice Slice /system/modprobe. | |
| [ OK ] Created slice Slice /system/modprobe. | |
| [ 3.012913] systemd[1]: Created slice Slice /system/serial-getty. | |
| [ OK ] Created slice Slice /system/serial-getty. | |
| [ 3.035434] systemd[1]: Created slice User and Session Slice. | |
| [ OK ] Created slice User and Session Slice. | |
| [ 3.057901] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [ OK ] Started Dispatch Password âts to Console Directory Watch. | |
| [ 3.081944] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [ OK ] Started Forward Password Râuests to Wall Directory Watch. | |
| [ 3.106045] systemd[1]: Reached target Path Units. | |
| [ OK ] Reached target Path Units. | |
| [ 3.125820] systemd[1]: Reached target Remote File Systems. | |
| [ OK ] Reached target Remote File Systems. | |
| [ 3.145947] systemd[1]: Reached target Slice Units. | |
| [ OK ] Reached target Slice Units. | |
| [ 3.165843] systemd[1]: Reached target Swaps. | |
| [ OK ] Reached target Swaps. | |
| [ 3.221328] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [ OK ] Listening on RPCbind Server Activation Socket. | |
| [ 3.245997] systemd[1]: Reached target RPC Port Mapper. | |
| [ OK ] Reached target RPC Port Mapper. | |
| [ 3.276460] systemd[1]: Listening on Process Core Dump Socket. | |
| [ OK ] Listening on Process Core Dump Socket. | |
| [ 3.298260] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [ OK ] Listening on initctl Compatibility Named Pipe. | |
| [ 3.322756] systemd[1]: Listening on Journal Audit Socket. | |
| [ OK ] Listening on Journal Audit Socket. | |
| [ 3.346701] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [ OK ] Listening on Journal Socket (/dev/log). | |
| [ 3.370740] systemd[1]: Listening on Journal Socket. | |
| [ OK ] Listening on Journal Socket. | |
| [ 3.390511] systemd[1]: Listening on Network Service Netlink Socket. | |
| [ OK ] Listening on Network Service Netlink Socket. | |
| [ 3.414803] systemd[1]: Listening on udev Control Socket. | |
| [ OK ] Listening on udev Control Socket. | |
| [ 3.438564] systemd[1]: Listening on udev Kernel Socket. | |
| [ OK ] Listening on udev Kernel Socket. | |
| [ 3.459144] systemd[1]: Listening on User Database Manager Socket. | |
| [ OK ] Listening on User Database Manager Socket. | |
| [ 3.506066] systemd[1]: Mounting Huge Pages File System... | |
| Mounting Huge Pages File System... | |
| [ 3.533578] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting POSIX Message Queue File System... | |
| [ 3.568210] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting Kernel Debug File System... | |
| [ 3.590801] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 3.638120] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting Temporary Directory /tmp... | |
| [ 3.658518] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc5-next-20231214-00001-g07739cb51c1d/modules.devname). | |
| [ 3.680209] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting Load Kernel Module configfs... | |
| [ 3.705157] systemd[1]: Starting Load Kernel Module drm... | |
| Starting Load Kernel Module drm... | |
| [ 3.728968] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting Load Kernel Module fuse... | |
| [ 3.786264] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting Start psplash boot splash screen... | |
| [ 3.814332] systemd[1]: Starting RPC Bind... | |
| Starting RPC Bind... | |
| [ 3.833892] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 3.862185] systemd[1]: Starting Journal Service... | |
| Starting Journal Service... | |
| [ 3.888875] systemd[1]: Starting Load Kernel Modules... | |
| Starting Load Kernel Modules... | |
| [ 3.904726] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting Generate network âts from Kernel command line... | |
| [ 3.924756] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting Remount Root and Kernel File Systems... | |
| [ 3.952934] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting Coldplug All udev Devices...[ 3.962154] EXT4-fs (mmcblk1p2): re-mounted ba312c0b-a677-454c-a9b6-2bcb63cc2491 r/w. Quota mode: none. | |
| [ 3.989861] systemd[1]: Started RPC Bind. | |
| [ OK ] Started RPC Bind. | |
| [ 4.010118] systemd[1]: Started Journal Service. | |
| [ OK ] Started Journal Service. | |
| [ OK ] Mounted Huge Pages File System. | |
| [ OK ] Mounted POSIX Message Queue File System. | |
| [ OK ] Mounted Kernel Debug File System. | |
| [ OK ] Mounted Temporary Directory /tmp. | |
| [ OK ] Finished Load Kernel Module configfs. | |
| [ OK ] Finished Load Kernel Module drm. | |
| [ OK ] Finished Load Kernel Module fuse. | |
| [FAILED] Failed to start Start psplash boot splash screen. | |
| See 'systemctl status psplash-start.service' for details. | |
| [DEPEND] Dependency failed for Starâprogress communication helper. | |
| [FAILED] Failed to start Load Kernel Modules. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [ OK ] Finished Generate network units from Kernel command line. | |
| [ OK ] Finished Remount Root and Kernel File Systems. | |
| Mounting Kernel Configuration File System... | |
| Starting Flush Journal to Persistent Storage... | |
| [ 4.330349] systemd-journald[102]: Received client request to flush runtime journal. | |
| Starting Apply Kernel Variables... | |
| Starting Create Static Device Nodes in /dev... | |
| [ OK ] Mounted Kernel Configuration File System. | |
| [ OK ] Finished Flush Journal to Persistent Storage. | |
| [ OK ] Finished Apply Kernel Variables. | |
| [ OK ] Finished Create Static Device Nodes in /dev. | |
| [ OK ] Reached target Preparation for Local File Systems. | |
| Mounting /media/ram... | |
| Mounting /var/volatile... | |
| [ 4.524825] audit: type=1334 audit(1651167747.172:2): prog-id=5 op=LOAD | |
| [ 4.531854] audit: type=1334 audit(1651167747.180:3): prog-id=6 op=LOAD | |
| Starting Rule-based Manageâfor Device Events and Files... | |
| [ OK ] Finished Coldplug All udev Devices. | |
| [ OK ] Mounted /media/ram. | |
| [ OK ] Mounted /var/volatile. | |
| Starting Load/Save Random Seed... | |
| [ OK ] Started Rule-based Manager for Device Events and Files. | |
| [ OK ] Finished Load/Save Random Seed. | |
| [ OK ] Found device /dev/ttyS2. | |
| [ OK ] Found device /dev/disk/by-uuid/6860-5418. | |
| Mounting /boot... | |
| [ 6.219976] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ OK ] Mounted /boot. | |
| [ OK ] Reached target Local File Systems. | |
| Starting Create Volatile Files and Directories... | |
| [ OK ] Finished Create Volatile Files and Directories. | |
| Starting Network Time Synchronization... | |
| Starting Record System Boot/Shutdown in UTMP... | |
| [ OK ] Finished Record System Boot/Shutdown in UTMP. | |
| [ 6.483297] systemd-journald[102]: Oldest entry in /run/log/journal/917457041518449ca571e0d70cbf05ad/system.journal is older than the configured file retention duration (1month), suggesting rotation. | |
| [ 6.501146] systemd-journald[102]: /run/log/journal/917457041518449ca571e0d70cbf05ad/system.journal: Journal header limits reached or header out-of-date, rotating. | |
| [ OK ] Started Network Time Synchronization. | |
| [ OK ] Reached target System Initialization. | |
| [ OK ] Started Daily Cleanup of Temporary Directories. | |
| [ OK ] Reached target System Time Set. | |
| [ OK ] Started Daily rotation of log files. | |
| [ OK ] Reached target Timer Units. | |
| [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Listening on D-Bus System Message Bus Socket. | |
| Starting Docker Socket for the API... | |
| [ OK ] Listening on dropbear.socket. | |
| [ OK ] Listening on PC/SC Smart Card Daemon Activation Socket. | |
| Starting Weston socket... | |
| Starting D-Bus System Message Bus... | |
| Starting Reboot and dump vmcore via kexec... | |
| [ OK ] Listening on Docker Socket for the API. | |
| [ OK ] Started D-Bus System Message Bus. | |
| [ OK ] Listening on Weston socket. | |
| [ OK ] Finished Reboot and dump vmcore via kexec. | |
| [ OK ] Reached target Socket Units. | |
| [ OK ] Reached target Basic System. | |
| [ OK ] Started Job spooling tools. | |
| [ OK ] Started Periodic Command Scheduler. | |
| Starting Print notice about GPLv3 packages... | |
| Starting IPv6 Packet Filtering Framework... | |
| Starting IPv4 Packet Filtering Framework... | |
| [ OK ] Started irqbalance daemon. | |
| Starting Lighttpd Daemon... | |
| [ OK ] Started strongSwan IPsec IâIKEv2 daemon using ipsec.conf. | |
| [ 7.098931] audit: type=1334 audit(1704364494.916:4): prog-id=7 op=LOAD | |
| [ 7.106020] audit: type=1334 audit(1704364494.916:5): prog-id=8 op=LOAD | |
| Starting User Login Management... | |
| [ OK ] Started TEE Supplicant. | |
| Starting Telnet Server... | |
| [FAILED] Failed to start Print notice about GPLv3 packages. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [ OK ] Finished IPv6 Packet Filtering Framework. | |
| [ OK ] Finished IPv4 Packet Filtering Framework. | |
| [ OK ] Started Lighttpd Daemon. | |
| [ OK ] Finished Telnet Server. | |
| [ OK ] Started User Login Management. | |
| [ OK ] Reached target Preparation for Network. | |
| Starting Network Configuration... | |
| [ OK ] Started Network Configuration. | |
| [ 7.453048] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 7.462538] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| Starting Network Name Resolution... | |
| [ OK ] Started Network Name Resolution. | |
| [ OK ] Reached target Network. | |
| [ OK ] Reached target Host and Network Name Lookups. | |
| Starting Avahi mDNS/DNS-SD Stack... | |
| Starting Enable and configure wl18xx bluetooth stack... | |
| Starting containerd container runtime... | |
| [ OK ] Started Netperf Benchmark Server. | |
| [ OK ] Started NFS status monitor for NFSv2/3 locking.. | |
| Starting Permit User Sessions... | |
| [FAILED] Failed to start Enable andâfigure wl18xx bluetooth stack. | |
| See 'systemctl status bt-enable.service' for details. | |
| [ OK ] Finished Permit User Sessions. | |
| [ OK ] Started Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Started Getty on tty1. | |
| [ OK ] Started Serial Getty on ttyS2. | |
| [ OK ] Reached target Login Prompts. | |
| Starting Synchronize System and HW clocks... | |
| Starting Weston, a Waylandâositor, as a system service... | |
| [FAILED] Failed to start Synchronize System and HW clocks. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 8.224410] audit: type=1334 audit(1704364496.040:6): prog-id=9 op=LOAD | |
| [ 8.231207] audit: type=1334 audit(1704364496.052:7): prog-id=10 op=LOAD | |
| Starting User Database Manager... | |
| [ OK ] Started User Database Manager. | |
| [ OK ] Created slice User Slice of UID 1000. | |
| Starting User Runtime Directory /run/user/1000... | |
| [ OK ] Finished User Runtime Directory /run/user/1000. | |
| Starting User Manager for UID 1000... | |
| [ 8.483751] audit: type=1006 audit(1704364496.300:8): pid=435 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 8.496304] audit: type=1300 audit(1704364496.300:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffff160c0c8 a2=4 a3=ffff82557020 items=0 ppid=1 pid=435 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 8.523164] audit: type=1327 audit(1704364496.300:8): proctitle="(systemd)" | |
| [ OK ] Started User Manager for UID 1000. | |
| [ OK ] Started Session c1 of User weston. | |
| [ 8.793457] audit: type=1006 audit(1704364496.608:9): pid=425 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [ 8.805894] audit: type=1300 audit(1704364496.608:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffff160c0c8 a2=4 a3=ffff82557020 items=0 ppid=1 pid=425 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) | |
| [ 8.832127] audit: type=1327 audit(1704364496.608:9): proctitle="(weston)" | |
| [FAILED] Failed to start Weston, a âmpositor, as a system service. | |
| See 'systemctl status weston.service' for details. | |
| [DEPEND] Dependency failed for Matrix GUI. | |
| [ OK ] Started containerd container runtime. | |
| [ OK ] Reached target Multi-User System. | |
| [ OK ] Reached target Graphical Interface. | |
| Starting Record Runlevel Change in UTMP... | |
| [ OK ] Finished Record Runlevel Change in UTMP. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j721e-evm - | |
| Arago 2023.10 j721e-evm - | |
| j721e-evm login: root | |
| [ 26.775526] audit: type=1006 audit(1704364514.592:10): pid=451 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 26.788292] audit: type=1300 audit(1704364514.592:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffff160c0c8 a2=1 a3=ffff82557020 items=0 ppid=1 pid=451 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 26.814952] audit: type=1327 audit(1704364514.592:10): proctitle="(systemd)" | |
| [ 26.822295] audit: type=1334 audit(1704364514.592:11): prog-id=11 op=LOAD | |
| [ 26.829375] audit: type=1300 audit(1704364514.592:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe4b52ae0 a2=78 a3=0 items=0 ppid=1 pid=451 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 26.854902] audit: type=1327 audit(1704364514.592:11): proctitle="(systemd)" | |
| [ 26.862117] audit: type=1334 audit(1704364514.608:12): prog-id=11 op=UNLOAD | |
| [ 26.869238] audit: type=1300 audit(1704364514.608:12): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffff7fadb020 a2=0 a3=ffff7fadb7e0 items=0 ppid=1 pid=451 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 26.895488] audit: type=1327 audit(1704364514.608:12): proctitle="(systemd)" | |
| [ 26.902733] audit: type=1334 audit(1704364514.608:13): prog-id=12 op=LOAD | |
| root@j721e-evm:~# cd /sys/devices/system/cpu/cpu0/cpufreq | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# ls | |
| affected_cpus cpuinfo_max_freq cpuinfo_transition_latency scaling_available_frequencies scaling_cur_freq scaling_governor scaling_min_freq stats | |
| cpuinfo_cur_freq cpuinfo_min_freq related_cpus scaling_available_governors scaling_driver scaling_max_freq scaling_setspeed | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat scaling_available_governors | |
| ondemand userspace performance schedutil | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat scaling_available_frequencies | |
| 250000 500000 1000000 2000000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# echo userspace > scaling_governor | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat scaling_cur_freq | |
| 250000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat scaling_min_freq | |
| 250000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat scaling_max_freq | |
| 2000000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq | |
| 250000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Fri Oct 06 12:20:16 UTC 2023) | | |
| | SoC | J721E SR1.1 | | |
| | SYSFW | ABI: 3.1 (firmware version 0x0009 '9.1.2--v09.01.02 (Kool Koala))') | | |
| |------------------------------------------------------------------------------| | |
| |-----------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-----------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 250000000 | | |
| |-----------------------------------------------------------------------------------------| | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# echo 500000 > scaling_setspeed | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq | |
| 500000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Fri Oct 06 12:20:16 UTC 2023) | | |
| | SoC | J721E SR1.1 | | |
| | SYSFW | ABI: 3.1 (firmware version 0x0009 '9.1.2--v09.01.02 (Kool Koala))') | | |
| |------------------------------------------------------------------------------| | |
| |-----------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-----------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 500000000 | | |
| |-----------------------------------------------------------------------------------------| | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# echo 1000000 > scaling_setspeed | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq | |
| 1000000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Fri Oct 06 12:20:16 UTC 2023) | | |
| | SoC | J721E SR1.1 | | |
| | SYSFW | ABI: 3.1 (firmware version 0x0009 '9.1.2--v09.01.02 (Kool Koala))') | | |
| |------------------------------------------------------------------------------| | |
| |-----------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-----------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 1000000000 | | |
| |-----------------------------------------------------------------------------------------| | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# echo 2000000 > scaling_setspeed | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# cat cpuinfo_cur_freq | |
| 2000000 | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# k3conf dump clock 202 | |
| |------------------------------------------------------------------------------| | |
| | VERSION INFO | | |
| |------------------------------------------------------------------------------| | |
| | K3CONF | (version 0.3-nogit built Fri Oct 06 12:20:16 UTC 2023) | | |
| | SoC | J721E SR1.1 | | |
| | SYSFW | ABI: 3.1 (firmware version 0x0009 '9.1.2--v09.01.02 (Kool Koala))') | | |
| |------------------------------------------------------------------------------| | |
| |-----------------------------------------------------------------------------------------| | |
| | Device ID | Clock ID | Clock Name | Status | Clock Frequency | | |
| |-----------------------------------------------------------------------------------------| | |
| | 202 | 2 | DEV_A72SS0_CORE0_ARM_CLK_CLK | CLK_STATE_READY | 2000000000 | | |
| |-----------------------------------------------------------------------------------------| | |
| root@j721e-evm:/sys/devices/system/cpu/cpu0/cpufreq# poweroff | |
| Stopping Session c2 of User root... | |
| [ OK ] Removed slice Slice /system/modprobe. | |
| [ OK ] Stopped target Graphical Interface. | |
| [ OK ] Stopped target Multi-User System. | |
| [ OK ] Stopped target Login Prompts. | |
| [ OK ] Stopped target RPC Port Mapper. | |
| [ OK ] Stopped target Timer Units. | |
| [ OK ] Stopped Daily rotation of log files. | |
| [ OK ] Stopped Daily Cleanup of Temporary Directories. | |
| [ OK ] Stopped target System Time Set. | |
| [ OK ] Closed Process Core Dump Socket. | |
| Stopping Job spooling tools... | |
| Stopping Avahi mDNS/DNS-SD Stack... | |
| Stopping containerd container runtime... | |
| Stopping Periodic Command Scheduler... | |
| Stopping Getty on tty1... | |
| Stopping irqbalance daemon... | |
| Stopping Reboot and dump vmcore via kexec... | |
| Stopping Lighttpd Daemon... | |
| Stopping Netperf Benchmark Server... | |
| Stopping NFS status monitor for NFSv2/3 locking.... | |
| Stopping Serial Getty on ttyS2... | |
| Stopping Load/Save Random Seed... | |
| Stopping TEE Supplicant... | |
| Stopping Telnet Server... | |
| [ OK ] Stopped Job spooling tools. | |
| [ OK ] Stopped Periodic Command Scheduler. | |
| [ OK ] Stopped irqbalance daemon. | |
| [ OK ] Stopped TEE Supplicant. | |
| [ OK ] Stopped Lighttpd Daemon. | |
| [ OK ] Stopped Avahi mDNS/DNS-SD Stack. | |
| [ OK ] Stopped Netperf Benchmark Server. | |
| [ OK ] Stopped NFS status monitor for NFSv2/3 locking.. | |
| [ OK ] Stopped containerd container runtime. | |
| [ OK ] Stopped Getty on tty1. | |
| [ OK ] Stopped Serial Getty on ttyS2. | |
| [ OK ] Stopped Reboot and dump vmcore via kexec. | |
| [ OK ] Stopped Load/Save Random Seed. | |
| [ OK ] Stopped Telnet Server. | |
| [ OK ] Stopped Session c2 of User root. | |
| [ OK ] Removed slice Slice /system/getty. | |
| [ OK ] Removed slice Slice /system/serial-getty. | |
| [ OK ] Stopped target Host and Network Name Lookups. | |
| Stopping User Login Management... | |
| Stopping User Manager for UID 0... | |
| [ OK ] Stopped User Manager for UID 0. | |
| Stopping User Runtime Directory /run/user/0... | |
| [ OK ] Unmounted /run/user/0. | |
| [ OK ] Stopped User Runtime Directory /run/user/0. | |
| [ OK ] Removed slice User Slice of UID 0. | |
| Stopping Permit User Sessions... | |
| [ OK ] Stopped User Login Management. | |
| [ OK ] Stopped Permit User Sessions. | |
| [ OK ] Stopped target Network. | |
| [ OK ] Stopped target Remote File Systems. | |
| Stopping Network Name Resolution... | |
| [ OK ] Stopped Network Name Resolution. | |
| Stopping Network Configuration... | |
| [ OK ] Stopped Network Configuration. | |
| [ OK ] Stopped target Preparation for Network. | |
| [ OK ] Stopped IPv6 Packet Filtering Framework. | |
| [ OK ] Stopped IPv4 Packet Filtering Framework. | |
| [ OK ] Stopped target Basic System. | |
| [ OK ] Stopped target Path Units. | |
| [ OK ] Stopped Dispatch Password âts to Console Directory Watch. | |
| [ OK ] Stopped Forward Password Râuests to Wall Directory Watch. | |
| [ OK ] Stopped target Slice Units. | |
| [ OK ] Removed slice User and Session Slice. | |
| [ OK ] Stopped target Socket Units. | |
| [ OK ] Closed Avahi mDNS/DNS-SD Stack Activation Socket. | |
| [ OK ] Closed Docker Socket for the API. | |
| [ OK ] Closed dropbear.socket. | |
| [ OK ] Closed PC/SC Smart Card Daemon Activation Socket. | |
| [ OK ] Closed Network Service Netlink Socket. | |
| [ OK ] Closed Weston socket. | |
| Stopping D-Bus System Message Bus... | |
| [ OK ] Stopped D-Bus System Message Bus. | |
| [ OK ] Closed D-Bus System Message Bus Socket. | |
| [ OK ] Stopped target System Initialization. | |
| [ OK ] Stopped Apply Kernel Variables. | |
| Stopping Network Time Synchronization... | |
| Stopping Record System Boot/Shutdown in UTMP... | |
| [ OK ] Stopped Network Time Synchronization. | |
| [ OK ] Stopped Record System Boot/Shutdown in UTMP. | |
| [ OK ] Stopped Create Volatile Files and Directories. | |
| [ OK ] Stopped target Local File Systems. | |
| Unmounting /boot... | |
| Unmounting /media/ram... | |
| Unmounting Temporary Directory /tmp... | |
| Unmounting /var/volatile... | |
| [ OK ] Unmounted /boot. | |
| [ OK ] Unmounted /media/ram. | |
| [ OK ] Unmounted Temporary Directory /tmp. | |
| [ OK ] Unmounted /var/volatile. | |
| [ OK ] Stopped target Preparation for Local File Systems. | |
| [ OK ] Stopped target Swaps. | |
| [ OK ] Reached target Unmount All Filesystems. | |
| [ OK ] Stopped Remount Root and Kernel File Systems. | |
| [ OK ] Stopped Create Static Device Nodes in /dev. | |
| [ OK ] Reached target System Shutdown. | |
| [ OK ] Reached target Late Shutdown Services. | |
| [ OK ] Finished System Power Off. | |
| [ OK ] Reached target System Power Off. | |
| [ 217.537751] kauditd_printk_skb: 5 callbacks suppressed | |
| [ 217.537758] audit: type=1334 audit(1704364705.352:15): prog-id=10 op=UNLOAD | |
| [ 217.549879] audit: type=1334 audit(1704364705.352:16): prog-id=9 op=UNLOAD | |
| [ 217.556755] audit: type=1334 audit(1704364705.352:17): prog-id=8 op=UNLOAD | |
| [ 217.563645] audit: type=1334 audit(1704364705.352:18): prog-id=7 op=UNLOAD | |
| [ 217.570541] audit: type=1334 audit(1704364705.356:19): prog-id=6 op=UNLOAD | |
| [ 217.577432] audit: type=1334 audit(1704364705.356:20): prog-id=5 op=UNLOAD | |
| [ 217.584328] audit: type=1334 audit(1704364705.356:21): prog-id=4 op=UNLOAD | |
| [ 217.591224] audit: type=1334 audit(1704364705.356:22): prog-id=3 op=UNLOAD | |
| [ 217.614119] systemd-shutdown[1]: Syncing filesystems and block devices. | |
| [ 217.629008] systemd-shutdown[1]: Sending SIGTERM to remaining processes... | |
| [ 217.640294] systemd-journald[102]: Received SIGTERM from PID 1 (systemd-shutdow). | |
| [ 217.648791] audit: type=1335 audit(1704364705.468:23): pid=102 uid=0 auid=4294967295 tty=(none) ses=4294967295 comm="systemd-journal" exe="/lib/systemd/systemd-journald" nl-mcgrp=1 op=disconnect res=1 | |
| [ 217.675612] systemd-shutdown[1]: Sending SIGKILL to remaining processes... | |
| [ 217.686581] systemd-shutdown[1]: Unmounting file systems. | |
| [ 217.693463] [507]: Remounting '/' read-only with options 'n/a'. | |
| [ 217.724358] EXT4-fs (mmcblk1p2): re-mounted ba312c0b-a677-454c-a9b6-2bcb63cc2491 ro. Quota mode: none. | |
| [ 217.735797] systemd-shutdown[1]: All filesystems unmounted. | |
| [ 217.741383] systemd-shutdown[1]: Deactivating swaps. | |
| [ 217.746467] systemd-shutdown[1]: All swaps deactivated. | |
| [ 217.751687] systemd-shutdown[1]: Detaching loop devices. | |
| [ 217.758529] systemd-shutdown[1]: All loop devices detached. | |
| [ 217.764106] systemd-shutdown[1]: Stopping MD devices. | |
| [ 217.769283] systemd-shutdown[1]: All MD devices stopped. | |
| [ 217.774593] systemd-shutdown[1]: Detaching DM devices. | |
| [ 217.779823] systemd-shutdown[1]: All DM devices detached. | |
| [ 217.785214] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. | |
| [ 217.803169] systemd-shutdown[1]: Syncing filesystems and block devices. | |
| [ 217.809823] systemd-shutdown[1]: Powering off. | |
| [ 217.828666] kvm: exiting hardware virtualization | |
| [ 217.833313] reboot: Power down |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| Cmage was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 987183 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| Cmage was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1319011 bytes | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SoC: J721E SR1.1 GP | |
| Model: Texas Instruments J721E SK A72 | |
| Board: J721EX-EAIK rev E2 | |
| DRAM: 4 GiB | |
| Core: 102 devices, 34 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ' | |
| => setenv bootcmd '' | |
| => setenv autoload 'no' | |
| => setenv serverip '10.24.68.106' | |
| => setenv _initramfs - | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j721e-sk | |
| board_rev=E2 | |
| board_serial=0166 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethaddr=24:76:25:96:41:a1 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde9a430 | |
| fdtoverlay_addr_r=0x89000000 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000166 | |
| serverip=10.24.68.106 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 10987/131067 bytes | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| => setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' | |
| => setenv serverip '10.24.68.106' | |
| => setenv autoload 'no' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 10.24.69.31 (1047 ms) | |
| => setenv dorprocboot '1' | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 79356 bytes read in 30 ms (2.5 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 30 ms (2.5 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 4 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 5 with data@addr=0x82000000 79356 bytes: Success! | |
| 145604 bytes read in 32 ms (4.3 MiB/s) | |
| Load Remote Processor 6 with data@addr=0x82000000 145604 bytes: Success! | |
| 145604 bytes read in 31 ms (4.5 MiB/s) | |
| Load Remote Processor 7 with data@addr=0x82000000 145604 bytes: Success! | |
| 10489000 bytes read in 38 ms (263.2 MiB/s) | |
| Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success! | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j721e-sk | |
| board_rev=E2 | |
| board_serial=0166 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dnsip=192.0.2.2 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethact=ethernet@46000000port@1 | |
| ethaddr=24:76:25:96:41:a1 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde9a430 | |
| fdtoverlay_addr_r=0x89000000 | |
| fileaddr=82000000 | |
| filesize=a00ca8 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| gatewayip=10.24.68.1 | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| hostname=dhcp-10-24-69-31 | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| ipaddr=10.24.69.31 | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| netmask=255.255.254.0 | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000166 | |
| serverip=10.24.68.106 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 11175/131067 bytes | |
| => tftp ${loadaddr} 10.24.68.106:vatf_j721e-sk-01/97fedc88b8ffeec3751cbc47e12abe25 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 10.24.68.106; our IP address is 10.24.69.31 | |
| Filename 'vatf_j721e-sk-01/97fedc88b8ffeec3751cbc47e12abe25'. | |
| Load address: 0x82000000 | |
| Loading: *################################################## 41 MiB | |
| 8.4 MiB/s | |
| done | |
| Bytes transferred = 43012608 (2905200 hex) | |
| => tftp ${fdt_addr_r} 10.24.68.106:vatf_j721e-sk-01/06703dc5031112c024a274b592289ba4 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 10.24.68.106; our IP address is 10.24.69.31 | |
| Filename 'vatf_j721e-sk-01/06703dc5031112c024a274b592289ba4'. | |
| Load address: 0x88000000 | |
| Loading: *################################################## 81.4 KiB | |
| 5.7 MiB/s | |
| done | |
| Bytes transferred = 83389 (145bd hex) | |
| => fdt address ${fdt_addr_r} | |
| Working FDT set to 88000000 | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| => setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 ' | |
| => printenv bootcmd | |
| bootcmd= | |
| => setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => bdinfo | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed2000 | |
| reloc off = 0x000000007f6d2000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 24:76:25:96:41:a1 | |
| IP addr = 10.24.69.31 | |
| fdt_blob = 0x00000000fde9a430 | |
| new_fdt = 0x00000000fde9a430 | |
| fdt_size = 0x0000000000017980 | |
| multi_dtb_fit= 0x0000000000000000 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x4 | |
| reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4 | |
| reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4 | |
| reserved[2] [0xfce8b000-0xffffffff], 0x03175000 bytes flags: 0 | |
| reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde9a420 | |
| sp start = 0x00000000fde9a420 | |
| Early malloc usage: 2990 / 8000 | |
| => | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed2000 | |
| reloc off = 0x000000007f6d2000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 24:76:25:96:41:a1 | |
| IP addr = 10.24.69.31 | |
| fdt_blob = 0x00000000fde9a430 | |
| new_fdt = 0x00000000fde9a430 | |
| fdt_size = 0x0000000000017980 | |
| multi_dtb_fit= 0x0000000000000000 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x4 | |
| reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4 | |
| reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4 | |
| reserved[2] [0xfce8b000-0xffffffff], 0x03175000 bytes flags: 0 | |
| reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde9a420 | |
| sp start = 0x00000000fde9a420 | |
| Early malloc usage: 2990 / 8000 | |
| => ls mmc 0:1 | |
| ** Bad device specification mmc 0 ** | |
| Couldn't find partition mmc 0:1 | |
| => ls mmc 1:1 | |
| EFI/ | |
| 21582336 Image | |
| 268978 sysfw.itb | |
| 268978 sysfw-j721e-gp-evm.itb | |
| 278254 sysfw-j721e_sr1_1-hs-evm.itb | |
| 269718 sysfw-j721e_sr2-hs-fs-evm.itb | |
| 294385 tiboot3.bin | |
| 294385 tiboot3-j721e-gp-evm.bin | |
| 295160 tiboot3-j721e_sr1_1-hs-evm.bin | |
| 295160 tiboot3-j721e_sr2-hs-fs-evm.bin | |
| 1077291 tispl.bin | |
| 1319011 u-boot.img | |
| 574 uEnv.txt | |
| 4 ws-calibrate.rules | |
| 13 file(s), 1 dir(s) | |
| => ext4ls mmc 0:2 /lib/firmware | |
| ** Bad device specification mmc 0 ** | |
| Couldn't find partition mmc 0:2 | |
| => ext4ls mmc 1:2 /lib/firmware | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| 2040 LICENCE.ibt_firmware | |
| 2046 LICENCE.iwlwifi_firmware | |
| 478552 bl32.bin | |
| 4295864 bl32.elf | |
| <DIR> 4096 cadence | |
| <DIR> 4096 intel | |
| 918268 iwlwifi-3160-17.ucode | |
| 2448976 iwlwifi-8000C-34.ucode | |
| 2428004 iwlwifi-8000C-36.ucode | |
| 2440780 iwlwifi-8265-34.ucode | |
| 2436632 iwlwifi-8265-36.ucode | |
| 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| 1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| <SYM> 69 j7-c66_0-fw | |
| <SYM> 76 j7-c66_0-fw-sec | |
| <SYM> 69 j7-c66_1-fw | |
| <SYM> 76 j7-c66_1-fw-sec | |
| <SYM> 65 j7-c71_0-fw | |
| <SYM> 72 j7-c71_0-fw-sec | |
| <SYM> 67 j7-main-r5f0_0-fw | |
| <SYM> 74 j7-main-r5f0_0-fw-sec | |
| <SYM> 67 j7-main-r5f0_1-fw | |
| <SYM> 74 j7-main-r5f0_1-fw-sec | |
| <SYM> 67 j7-main-r5f1_0-fw | |
| <SYM> 74 j7-main-r5f1_0-fw-sec | |
| <SYM> 67 j7-main-r5f1_1-fw | |
| <SYM> 74 j7-main-r5f1_1-fw-sec | |
| <SYM> 67 j7-mcu-r5f0_1-fw | |
| <SYM> 74 j7-mcu-r5f0_1-fw-sec | |
| <SYM> 49 j7-pru0_0-fw | |
| <SYM> 49 j7-pru0_1-fw | |
| <SYM> 49 j7-pru1_0-fw | |
| <SYM> 49 j7-pru1_1-fw | |
| <SYM> 49 j7-rtu0_0-fw | |
| <SYM> 49 j7-rtu0_1-fw | |
| <SYM> 49 j7-rtu1_0-fw | |
| <SYM> 49 j7-rtu1_1-fw | |
| <SYM> 35 j7-txpru0_0-fw | |
| <SYM> 35 j7-txpru0_1-fw | |
| <SYM> 35 j7-txpru1_0-fw | |
| <SYM> 35 j7-txpru1_1-fw | |
| <DIR> 4096 pru | |
| 247469 pvdec_full_bin.fw | |
| 4728 regulatory.db | |
| 1182 regulatory.db.p7s | |
| 131072 rgx.fw.22.104.208.318 | |
| 131072 rgx.fw.22.104.208.318.64k | |
| 382744 rgx.sh.22.104.208.318 | |
| 28 tee-header_v2.bin | |
| 0 tee-pageable_v2.bin | |
| 478552 tee-pager_v2.bin | |
| 478552 tee-raw.bin | |
| 478580 tee.bin | |
| 4295864 tee.elf | |
| <DIR> 4096 ti-connectivity | |
| <DIR> 4096 ti-eth | |
| <DIR> 4096 ti-ipc | |
| => mmc rescan; echo $? | |
| MMC Device 0 not found | |
| no mmc device at slot 0 | |
| 1 | |
| => fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 | |
| 4 bytes written in 38 ms (0 Bytes/s) | |
| => boot | |
| ## Checking Image at 82000000 ... | |
| Unknown image format! | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008ffe8000, end 000000008ffff5bc ... OK | |
| Working FDT set to 8ffe8000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc5-next-20231214-00001-g07739cb51c1d (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP PREEMPT Thu Jan 4 15:54:17 IST 2024 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J721E SK | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000 | |
| [ 0.000000] NUMA: No NUMA configuration found | |
| [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] NUMA: NODE_DATA [mem 0x8ff7ea9c0-0x8ff7ecfff] | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] | |
| [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 22 pages/cpu s50728 r8192 d31192 u90112 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| [ 0.000000] sysrq: sysrq always enabled. | |
| [ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Fallback order for Node 0: 0 | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] Policy zone: Normal | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) | |
| [ 0.000000] Memory: 3771620K/4194304K available (16768K kernel code, 4500K rwdata, 10992K rodata, 9600K init, 608K bss, 389916K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.009178] Console: colour dummy device 80x25 | |
| [ 0.013763] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.024435] pid_max: default: 32768 minimum: 301 | |
| [ 0.029184] LSM: initializing lsm=capability,integrity | |
| [ 0.034488] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.042061] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.050933] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.058191] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.066047] rcu: Hierarchical SRCU implementation. | |
| [ 0.070943] rcu: Max phase no-delay instances is 1000. | |
| [ 0.076453] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.082663] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091983] fsl-mc MSI: msi-controller@1820000 domain created | |
| [ 0.099547] EFI services will not be available. | |
| [ 0.104277] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| [ 0.117470] Detected PIPT I-cache on CPU1 | |
| [ 0.117517] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.117530] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.117561] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.117612] smp: Brought up 1 node, 2 CPUs | |
| [ 0.146958] SMP: Total of 2 processors activated. | |
| [ 0.151763] CPU: All CPU(s) started at EL2 | |
| [ 0.155963] CPU features: detected: 32-bit EL0 Support | |
| [ 0.161213] CPU features: detected: 32-bit EL1 Support | |
| [ 0.166461] CPU features: detected: CRC32 instructions | |
| [ 0.171726] alternatives: applying system-wide alternatives | |
| [ 0.178422] devtmpfs: initialized | |
| [ 0.187441] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.197420] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.204926] pinctrl core: initialized pinctrl subsystem | |
| [ 0.211811] DMI not present or invalid. | |
| [ 0.216147] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.222616] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.229927] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.237966] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.246084] audit: initializing netlink subsys (disabled) | |
| [ 0.251687] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.252440] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.259614] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.265866] cpuidle: using governor menu | |
| [ 0.276658] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.283620] ASID allocator initialised with 65536 entries | |
| [ 0.290358] Serial: AMBA PL011 UART driver | |
| [ 0.310879] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@0/endpoint | |
| [ 0.324075] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@4/endpoint | |
| [ 0.335033] platform dvi-bridge: Fixed dependency cycle(s) with /hdmi-connector/port/endpoint | |
| [ 0.343770] platform dvi-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000/ports/port@1/endpoint | |
| [ 0.354075] Modules: 22096 pages in range for non-PLT usage | |
| [ 0.354078] Modules: 513616 pages in range for PLT usage | |
| [ 0.360177] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.372539] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.378941] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.385875] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.392276] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.399210] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.405611] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.412547] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.419953] ACPI: Interpreter disabled. | |
| [ 0.425543] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.1 JTAGID[0x1bb6402f] Detected | |
| [ 0.434636] iommu: Default domain type: Translated | |
| [ 0.439536] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.445997] SCSI subsystem initialized | |
| [ 0.449991] usbcore: registered new interface driver usbfs | |
| [ 0.455609] usbcore: registered new interface driver hub | |
| [ 0.461048] usbcore: registered new device driver usb | |
| [ 0.466912] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.471985] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.481322] PTP clock support registered | |
| [ 0.485424] EDAC MC: Ver: 3.0.0 | |
| [ 0.489065] scmi_core: SCMI protocol bus registered | |
| [ 0.494757] FPGA manager framework | |
| [ 0.498273] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.504964] vgaarb: loaded | |
| [ 0.508193] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.514547] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.518568] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.525681] pnp: PnP ACPI: disabled | |
| [ 0.532332] NET: Registered PF_INET protocol family | |
| [ 0.537457] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.546424] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.555187] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.563110] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.571313] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.579828] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.586600] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.593511] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.600945] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.607032] RPC: Registered named UNIX socket transport module. | |
| [ 0.613090] RPC: Registered udp transport module. | |
| [ 0.617893] RPC: Registered tcp transport module. | |
| [ 0.622696] RPC: Registered tcp-with-tls transport module. | |
| [ 0.628306] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.634893] PCI: CLS 0 bytes, default 64 | |
| [ 0.639078] kvm [1]: IPA Size Limit: 44 bits | |
| [ 0.644338] kvm [1]: vgic-v2@6f020000 | |
| [ 0.648089] kvm [1]: GIC system register CPU interface enabled | |
| [ 0.654067] kvm [1]: vgic interrupt IRQ9 | |
| [ 0.658089] kvm [1]: Hyp mode initialized successfully | |
| [ 0.663975] Initialise system trusted keyrings | |
| [ 0.668641] workingset: timestamp_bits=42 max_order=20 bucket_order=0 | |
| [ 0.675397] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.681501] NFS: Registering the id_resolver key type | |
| [ 0.686675] Key type id_resolver registered | |
| [ 0.690946] Key type id_legacy registered | |
| [ 0.695047] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.701896] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.709536] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.736306] Key type asymmetric registered | |
| [ 0.740489] Asymmetric key parser 'x509' registered | |
| [ 0.745494] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
| [ 0.753054] io scheduler mq-deadline registered | |
| [ 0.757685] io scheduler kyber registered | |
| [ 0.761797] io scheduler bfq registered | |
| [ 0.771771] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 | |
| [ 0.778147] pinctrl-single 11c000.pinctrl: 173 pins, size 692 | |
| [ 0.784441] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.790197] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.801166] EINJ: ACPI disabled. | |
| [ 0.824004] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.832742] msm_serial: driver initialized | |
| [ 0.837184] SuperH (H)SCI(F) driver initialized | |
| [ 0.841934] STM32 USART driver initialized | |
| [ 0.847784] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf) | |
| [ 0.855982] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq | |
| [ 0.863001] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq | |
| [ 0.870668] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs | |
| [ 0.881857] loop: module loaded | |
| [ 0.885878] megasas: 07.727.03.00-rc1 | |
| [ 0.894108] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.900003] thunder_xcv, ver 1.0 | |
| [ 0.903319] thunder_bgx, ver 1.0 | |
| [ 0.906626] nicpf, ver 1.0 | |
| [ 0.910264] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.917648] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.923087] hclge is initializing | |
| [ 0.926486] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.931467] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.937346] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.942415] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.948473] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.953987] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.959691] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.966097] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.972387] sky2: driver version 1.30 | |
| [ 0.977158] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.984534] usbcore: registered new interface driver usb-storage | |
| [ 0.992781] i2c_dev: i2c /dev entries driver | |
| [ 1.002356] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.008707] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.013726] Synopsys Designware Multimedia Card Interface Driver | |
| [ 1.020571] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.027748] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.034385] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.041747] usbcore: registered new interface driver usbhid | |
| [ 1.047448] usbhid: USB HID core driver | |
| [ 1.053778] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 1.063664] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 1.068224] optee: revision 3.20 (8e74d476) | |
| [ 1.084664] optee: dynamic shared memory is enabled | |
| [ 1.094342] random: crng init done | |
| [ 1.097880] optee: initialized driver | |
| [ 1.101864] mmio-mux 47000004.mux-controller: failed to get regmap: -19 | |
| [ 1.110930] NET: Registered PF_PACKET protocol family | |
| [ 1.116154] 9pnet: Installing 9P2000 support | |
| [ 1.120547] Key type dns_resolver registered | |
| [ 1.128830] registered taskstats version 1 | |
| [ 1.133070] Loading compiled-in X.509 certificates | |
| [ 1.154768] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.263785] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.270380] pca954x 1-0071: supply vdd not found, using dummy regulator | |
| [ 1.300372] i2c i2c-1: Added multiplexed i2c bus 2 | |
| [ 1.305362] i2c i2c-1: Added multiplexed i2c bus 3 | |
| [ 1.310262] pca954x 1-0071: registered 2 multiplexed busses for I2C switch pca9543 | |
| [ 1.318025] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.324371] omap_i2c 2010000.i2c: bus 4 rev0.12 at 100 kHz | |
| [ 1.330732] pca954x 5-0070: supply vdd not found, using dummy regulator | |
| [ 1.360380] i2c i2c-5: Added multiplexed i2c bus 6 | |
| [ 1.365375] i2c i2c-5: Added multiplexed i2c bus 7 | |
| [ 1.370274] pca954x 5-0070: registered 2 multiplexed busses for I2C switch pca9543 | |
| [ 1.378036] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz | |
| [ 1.384425] omap_i2c 2050000.i2c: bus 8 rev0.12 at 400 kHz | |
| [ 1.390386] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 1.399079] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 1.408549] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 1.417269] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created | |
| [ 1.428913] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 | |
| [ 1.438814] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.445574] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.455741] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 | |
| [ 1.465920] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.472691] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.481518] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250 | |
| [ 1.491843] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250 | |
| [ 1.500702] printk: legacy console [ttyS2] enabled | |
| [ 1.500702] printk: legacy console [ttyS2] enabled | |
| [ 1.510374] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.510374] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.525494] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250 | |
| [ 1.537603] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.584197] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.593757] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.602033] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.614845] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.622053] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.640282] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 1.651937] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) | |
| [ 1.666061] spi_master spi0: No. of CS is more than max. no. of supported CS | |
| [ 1.673111] spi_master spi0: Failed to create SPI device for /bus@100000/bus@28380000/bus@47000000/spi@47040000/flash@0 | |
| [ 1.685630] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.732197] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.741712] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.749987] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.762800] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.770009] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.781775] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 1.791623] mmc1: CQHCI version 5.10 | |
| [ 1.830775] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 1.846005] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 1.855478] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 1.887736] mmc1: new ultra high speed DDR50 SDHC card at address aaaa | |
| [ 1.894654] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.903235] mmcblk1: p1 p2 p3 | |
| [ 5.940985] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 5.972194] Sending DHCP requests ., OK | |
| [ 6.032028] IP-Config: Got DHCP answer from 10.24.68.2, my address is 10.24.69.31 | |
| [ 6.039501] IP-Config: Complete: | |
| [ 6.042720] device=eth0, hwaddr=24:76:25:96:41:a1, ipaddr=10.24.69.31, mask=255.255.254.0, gw=10.24.68.1 | |
| [ 6.052617] host=dhcp-10-24-69-31, domain=dhcp.ti.com, nis-domain=(none) | |
| [ 6.059736] bootserver=0.0.0.0, rootserver=10.24.68.106, rootpath= | |
| [ 6.059739] nameserver0=192.0.2.2, nameserver1=192.0.2.3 | |
| [ 6.072289] clk: Disabling unused clocks | |
| [ 6.098130] ALSA device list: | |
| [ 6.101114] No soundcards found. | |
| [ 6.115447] VFS: Mounted root (nfs filesystem) on device 0:21. | |
| [ 6.121615] devtmpfs: mounted | |
| [ 6.129094] Freeing unused kernel memory: 9600K | |
| [ 6.140277] Run /sbin/init as init process | |
| [ 6.303922] systemd[1]: System time before build time, advancing clock. | |
| [ 6.338206] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 6.369671] systemd[1]: Detected architecture arm64. | |
| Welcome to [1mArago 2023.04[0m! | |
| [ 6.425690] systemd[1]: Hostname set to <j721e-evm>. | |
| [ 6.530460] systemd[72]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. | |
| [ 6.532488] systemd-sysv-generator[81]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.565120] systemd-sysv-generator[81]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.591779] systemd-sysv-generator[81]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.818708] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.827596] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.858845] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.920283] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.992883] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 7.027987] systemd[1]: Created slice Slice /system/getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. | |
| [ 7.049529] systemd[1]: Created slice Slice /system/modprobe. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. | |
| [ 7.073519] systemd[1]: Created slice Slice /system/serial-getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. | |
| [ 7.097256] systemd[1]: Created slice User and Session Slice. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
| [ 7.120399] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m. | |
| [ 7.144347] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m. | |
| [ 7.168404] systemd[1]: Reached target Path Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. | |
| [ 7.184260] systemd[1]: Reached target Remote File Systems. | |
| [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
| [ 7.204259] systemd[1]: Reached target Slice Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. | |
| [ 7.220261] systemd[1]: Reached target Swaps. | |
| [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. | |
| [ 7.255023] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
| [ 7.280435] systemd[1]: Reached target RPC Port Mapper. | |
| [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
| [ 7.304723] systemd[1]: Listening on Process Core Dump Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m. | |
| [ 7.328419] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
| [ 7.353150] systemd[1]: Listening on Journal Audit Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. | |
| [ 7.377067] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
| [ 7.400538] systemd[1]: Listening on Journal Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
| [ 7.417149] systemd[1]: Listening on Network Service Netlink Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
| [ 7.442006] systemd[1]: Listening on udev Control Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
| [ 7.464479] systemd[1]: Listening on udev Kernel Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
| [ 7.484866] systemd[1]: Listening on User Database Manager Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. | |
| [ 7.528490] systemd[1]: Mounting Huge Pages File System... | |
| Mounting [0;1;39mHuge Pages File System[0m... | |
| [ 7.546623] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
| [ 7.570526] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting [0;1;39mKernel Debug File System[0m... | |
| [ 7.588448] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 7.605372] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting [0;1;39mTemporary Directory /tmp[0m... | |
| [ 7.620469] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc5-next-20231214-00001-g07739cb51c1d/modules.devname). | |
| [ 7.640977] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting [0;1;39mLoad Kernel Module configfs[0m... | |
| [ 7.658459] systemd[1]: Starting Load Kernel Module drm... | |
| Starting [0;1;39mLoad Kernel Module drm[0m... | |
| [ 7.700636] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting [0;1;39mLoad Kernel Module fuse[0m... | |
| [ 7.724121] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting [0;1;39mStart psplash boot splash screen[0m... | |
| [ 7.772803] systemd[1]: Starting RPC Bind... | |
| Starting [0;1;39mRPC Bind[0m... | |
| [ 7.792733] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 7.809033] systemd[1]: Starting Journal Service... | |
| Starting [0;1;39mJournal Service[0m... | |
| [ 7.831686] systemd[1]: Starting Load Kernel Modules... | |
| Starting [0;1;39mLoad Kernel Modules[0m... | |
| [ 7.850921] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting [0;1;39mGenerate network ts from Kernel command line[0m... | |
| [ 7.888774] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
| [ 7.917410] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting [0;1;39mColdplug All udev Devices[0m... | |
| [ 7.943877] systemd[1]: Started RPC Bind. | |
| [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
| [ 7.960701] systemd[1]: Started Journal Service. | |
| [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m. | |
| See 'systemctl status psplash-start.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. | |
| Mounting [0;1;39mKernel Configuration File System[0m... | |
| Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
| Starting [0;1;39mApply Kernel Variables[0m... | |
| [ 8.293205] systemd-journald[96]: Received client request to flush runtime journal. | |
| Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. | |
| Mounting [0;1;39m/media/ram[0m... | |
| Mounting [0;1;39m/var/volatile[0m... | |
| [ 8.470505] audit: type=1334 audit(1651167747.164:2): prog-id=5 op=LOAD | |
| [ 8.477475] audit: type=1334 audit(1651167747.172:3): prog-id=6 op=LOAD | |
| Starting [0;1;39mRule-based Managefor Device Events and Files[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
| Starting [0;1;39mLoad/Save Random Seed[0m... | |
| [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
| Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
| [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. | |
| Starting [0;1;39mNetwork Time Synchronization[0m... | |
| Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
| Starting [0;1;39mDocker Socket for the API[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m. | |
| Starting [0;1;39mWeston socket[0m... | |
| Starting [0;1;39mD-Bus System Message Bus[0m... | |
| Starting [0;1;39mReboot and dump vmcore via kexec[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m. | |
| [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
| [[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m. | |
| [[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m. | |
| Starting [0;1;39mPrint notice about GPLv3 packages[0m... | |
| Starting [0;1;39mIPv6 Packet Filtering Framework[0m... | |
| Starting [0;1;39mIPv4 Packet Filtering Framework[0m... | |
| [[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m. | |
| Starting [0;1;39mLighttpd Daemon[0m... | |
| [[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m. | |
| [ 9.560170] audit: type=1334 audit(1651167748.252:4): prog-id=7 op=LOAD | |
| [ 9.569678] audit: type=1334 audit(1651167748.264:5): prog-id=8 op=LOAD | |
| Starting [0;1;39mUser Login Management[0m... | |
| [[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m. | |
| Starting [0;1;39mTelnet Server[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. | |
| Starting [0;1;39mNetwork Configuration[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m. | |
| Starting [0;1;39mNetwork Name Resolution[0m... | |
| [ 10.283061] audit: type=1334 audit(1651167748.976:6): prog-id=9 op=LOAD | |
| [ 10.296290] audit: type=1334 audit(1651167748.988:7): prog-id=10 op=LOAD | |
| Starting [0;1;39mHostname Service[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
| Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
| Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m... | |
| Starting [0;1;39mcontainerd container runtime[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m. | |
| Starting [0;1;39mPermit User Sessions[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m. | |
| See 'systemctl status bt-enable.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. | |
| [[0;32m OK [0m] Started [0;1;39mHostname Service[0m. | |
| [[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
| [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
| Starting [0;1;39mSynchronize System and HW clocks[0m... | |
| Starting [0;1;39mWeston, a Waylandositor, as a system service[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 11.148294] audit: type=1334 audit(1651167749.840:8): prog-id=11 op=LOAD | |
| [ 11.156351] audit: type=1334 audit(1651167749.852:9): prog-id=12 op=LOAD | |
| Starting [0;1;39mUser Database Manager[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m. | |
| Starting [0;1;39mUser Runtime Directory /run/user/1000[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m. | |
| Starting [0;1;39mUser Manager for UID 1000[0m... | |
| [ 11.670912] audit: type=1006 audit(1651167750.364:10): pid=371 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 11.689141] audit: type=1300 audit(1651167750.364:10): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=fffff372f928 a2=4 a3=ffffb6c9c020 items=0 ppid=1 pid=371 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m. | |
| See 'systemctl status weston.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. | |
| Mounting [0;1;39m/run/media/mmcblk1p3[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m... | |
| Starting [0;1;39mRecord Runlevel Change in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m. | |
| Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m... | |
| Mounting [0;1;39m/run/media/root-mmcblk1p2[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m. | |
| [ 12.666497] EXT4-fs (mmcblk1p2): mounted filesystem 62331353-c8ba-442e-85e0-58340be048a2 r/w with ordered data mode. Quota mode: none. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m. | |
| [ 12.704590] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m. | |
| [ 12.792367] EXT4-fs (mmcblk1p3): mounted filesystem 264ab8da-e4cd-46c6-8429-aab7146a8a71 r/w with ordered data mode. Quota mode: none. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j721e-evm - | |
| Arago 2023.04 j721e-evm - | |
| j721e-evm login: root | |
| [ 14.179470] kauditd_printk_skb: 4 callbacks suppressed | |
| [ 14.179476] audit: type=1006 audit(1651167752.872:12): pid=484 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 14.197414] audit: type=1300 audit(1651167752.872:12): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=fffff372f928 a2=1 a3=ffffb6c9c020 items=0 ppid=1 pid=484 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.223839] audit: type=1327 audit(1651167752.872:12): proctitle="(systemd)" | |
| [ 14.230908] audit: type=1334 audit(1651167752.896:13): prog-id=13 op=LOAD | |
| [ 14.237885] audit: type=1300 audit(1651167752.896:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe078adc0 a2=78 a3=0 items=0 ppid=1 pid=484 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.263289] audit: type=1327 audit(1651167752.896:13): proctitle="(systemd)" | |
| [ 14.270426] audit: type=1334 audit(1651167752.916:14): prog-id=13 op=UNLOAD | |
| [ 14.277451] audit: type=1300 audit(1651167752.916:14): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=fffface7e020 a2=0 a3=fffface7e7e0 items=0 ppid=1 pid=484 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.303620] audit: type=1327 audit(1651167752.916:14): proctitle="(systemd)" | |
| [ 14.310908] audit: type=1334 audit(1651167752.920:15): prog-id=14 op=LOAD | |
| 7[r[999;999H[6nroot@j721e-evm:~# uname -a | |
| Linux j721e-evm 6.7.0-rc5-next-20231214-00001-g07739cb51c1d #1 SMP PREEMPT Thu Jan 4 15:54:17 IST 2024 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721e-evm:~# cat /proc/cmdline | |
| console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| root@j721e-evm:~# uname -a | |
| Linux j721e-evm 6.7.0-rc5-next-20231214-00001-g07739cb51c1d #1 SMP PREEMPT Thu Jan 4 15:54:17 IST 2024 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721e-evm:~# cat /proc/mtd | |
| dev: size erasesize name | |
| root@j721e-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p | |
| pnp /etc/resolv.conf && systemctl restart systemd-resolved | |
| root@j721e-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc | |
| total 27228 | |
| -rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware | |
| -rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 bl32.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 bl32.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 intel | |
| -rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode | |
| -rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode | |
| -rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode | |
| -rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode | |
| -rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode | |
| -rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| -rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| -rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66 | |
| lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66.signed | |
| lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66 | |
| lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66.signed | |
| lrwxrwxrwx 1 root root 65 Mar 9 2018 j7-c71_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 72 Mar 9 2018 j7-c71_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_1.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 pru | |
| -rw-r--r-- 1 root root 247469 Mar 9 2018 pvdec_full_bin.fw | |
| -rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db | |
| -rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s | |
| -rw-r--r-- 1 root root 122880 Mar 9 2018 rgx.fw.22.104.208.318 | |
| -rw-r--r-- 1 root root 118784 Mar 9 2018 rgx.fw.22.104.208.318.64k | |
| -rw-r--r-- 1 root root 382744 Mar 9 2018 rgx.sh.22.104.208.318 | |
| -rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin | |
| -rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 tee-pager_v2.bin | |
| -rw-r--r-- 1 root root 432276 Mar 9 2018 tee.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 tee.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc | |
| ls: cannot access '/lib/firmware/ipc': No such file or directory | |
| root@j721e-evm:~# cat /proc/diskstats | |
| 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 179 0 mmcblk1 1147 43 49293 3091 2 0 16 6 0 1492 3097 0 0 0 0 0 0 | |
| 179 1 mmcblk1p1 238 0 14593 1013 0 0 0 0 0 848 1013 0 0 0 0 0 0 | |
| 179 2 mmcblk1p2 199 39 15114 858 1 0 8 1 0 744 860 0 0 0 0 0 0 | |
| 179 3 mmcblk1p3 671 4 18378 1139 1 0 8 4 0 1056 1143 0 0 0 0 0 0 | |
| root@j721e-evm:~# cat /proc/interrupts | |
| CPU0 CPU1 | |
| 9: 0 0 GICv3 25 Level vgic | |
| 11: 3668 3235 GICv3 30 Level arch_timer | |
| 12: 0 0 GICv3 27 Level kvm guest vtimer | |
| 14: 0 0 GICv3 804 Edge arm-smmu-v3-evtq | |
| 15: 0 0 GICv3 800 Edge arm-smmu-v3-gerror | |
| 16: 0 0 GICv3 23 Level arm-pmu | |
| 17: 2369 0 GICv3 69 Level 32c00000.mailbox thr_011 | |
| 38: 0 0 GICv3 928 Level 42120000.i2c | |
| 39: 2 0 GICv3 232 Level 2000000.i2c | |
| 40: 0 0 GICv3 233 Level 2010000.i2c | |
| 41: 2 0 GICv3 235 Level 2030000.i2c | |
| 42: 0 0 GICv3 237 Level 2050000.i2c | |
| 43: 0 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0 | |
| 44: 4 0 MSI-INTA 15401057 Level 46000000.ethernet-tx1 | |
| 45: 2 0 MSI-INTA 15401058 Level 46000000.ethernet-tx2 | |
| 46: 0 0 MSI-INTA 15401059 Level 46000000.ethernet-tx3 | |
| 47: 39841 0 MSI-INTA 15401060 Level 46000000.ethernet-tx4 | |
| 48: 12 0 MSI-INTA 15401061 Level 46000000.ethernet-tx5 | |
| 49: 7 0 MSI-INTA 15401062 Level 46000000.ethernet-tx6 | |
| 50: 9 0 MSI-INTA 15401063 Level 46000000.ethernet-tx7 | |
| 52: 58122 0 MSI-INTA 15401065 Level 46000000.ethernet | |
| 63: 0 0 MSI-INTA 13828536 Level 31150000.dma-controller chan0 | |
| 213: 0 0 GICv3 878 Level 40a00000.serial | |
| 214: 663 0 GICv3 224 Level 2800000.serial | |
| 215: 0 0 GICv3 225 Level 2810000.serial | |
| 216: 0 0 GICv3 872 Level 47040000.spi | |
| 631: 2394 0 GICv3 36 Level mmc1 | |
| IPI0: 1756 7486 Rescheduling interrupts | |
| IPI1: 3209 8892 Function call interrupts | |
| IPI2: 0 0 CPU stop interrupts | |
| IPI3: 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 Timer broadcast interrupts | |
| IPI5: 74 110 IRQ work interrupts | |
| Err: 0 | |
| root@j721e-evm:~# cat /proc/softirqs | |
| CPU0 CPU1 | |
| HI: 0 0 | |
| TIMER: 1158 1277 | |
| NET_TX: 20 2 | |
| NET_RX: 61708 59 | |
| BLOCK: 0 0 | |
| IRQ_POLL: 0 0 | |
| TASKLET: 2410 2 | |
| SCHED: 1759 1759 | |
| HRTIMER: 122 15 | |
| RCU: 4589 5863 | |
| root@j721e-evm:~# ls -lR /run/media/mmcblk0p1 | |
| ls: cannot access '/run/media/mmcblk0p1': No such file or directory | |
| root@j721e-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $? | |
| 1 | |
| root@j721e-evm:~# [ 40.532257] kauditd_printk_skb: 5 callbacks suppressed | |
| [ 40.532263] audit: type=1334 audit(1651167779.228:17): prog-id=10 op=UNLOAD | |
| [ 40.544470] audit: type=1334 audit(1651167779.240:18): prog-id=9 op=UNLOAD | |
| opkg list-installed | grep ti-test; echo $? | |
| ti-test - 1.0-r0.121 | |
| ti-test-extras - 1.0-r0.121 | |
| 0 | |
| root@j721e-evm:~# depmod -a | |
| depmod: ERROR: could not open directory /lib/modules/6.7.0-rc5-next-20231214-00001-g07739cb51c1d: No such file or directory | |
| depmod: FATAL: could not search modules: No such file or directory | |
| root@j721e-evm:~# lsmod | |
| Module Size Used by | |
| root@j721e-evm:~# echo 'hello world' | |
| hello world | |
| root@j721e-evm:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment