Created
November 22, 2023 10:39
-
-
Save nehamalcom/384cf594e37739a34f8a08664830e37a to your computer and use it in GitHub Desktop.
Add TPS6594 PMIC support on J7 boards
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| CWarning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 938099 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from UART | |
| Ccertificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1184347 bytes | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SoC: J7200 SR2.0 GP | |
| Model: Texas Instruments K3 J7200 SoC | |
| Board: J7200X-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 85 devices, 31 uclasses, devicetree: separate | |
| Flash: 64 MiB | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ' | |
| => setenv bootcmd '' | |
| => setenv autoload 'no' | |
| => setenv serverip '192.168.0.1' | |
| => setenv _initramfs - | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j7200 | |
| board_rev=E8 | |
| board_serial=0071 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x800 mmcpart 1; tispl.bin.raw raw 0x800 0x1000 mmcpart 1; u-boot.img.raw raw 0x1800 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x100000; tispl.bin raw 0x100000 0x200000; u-boot.img raw 0x300000 0x400000; u-boot-env raw 0x700000 0x020000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| do_main_cpsw0_qsgmii_phyinit=1 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| eth1addr=70:ff:76:1d:9b:3e | |
| eth2addr=70:ff:76:1d:9b:3f | |
| eth3addr=70:ff:76:1d:9b:40 | |
| eth4addr=70:ff:76:1d:9b:41 | |
| ethaddr=34:08:e1:59:e3:d5 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fdea05f0 | |
| fdtoverlay_addr_r=0x89000000 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7200-mcu-r5f0_1-fw 2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000071 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 10322/131067 bytes | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| => setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' | |
| => setenv serverip '192.168.0.1' | |
| => setenv autoload 'no' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 192.168.0.116 (1015 ms) | |
| => setenv dorprocboot '1' | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 64508 bytes read in 10 ms (6.2 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 64508 bytes: Success! | |
| 64508 bytes read in 11 ms (5.6 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 64508 bytes: Success! | |
| 64508 bytes read in 11 ms (5.6 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 64508 bytes: Success! | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j7200 | |
| board_rev=E8 | |
| board_serial=0071 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x800 mmcpart 1; tispl.bin.raw raw 0x800 0x1000 mmcpart 1; u-boot.img.raw raw 0x1800 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x100000; tispl.bin raw 0x100000 0x200000; u-boot.img raw 0x300000 0x400000; u-boot-env raw 0x700000 0x020000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dnsip=192.0.2.2 | |
| do_main_cpsw0_qsgmii_phyinit=1 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| eth1addr=70:ff:76:1d:9b:3e | |
| eth2addr=70:ff:76:1d:9b:3f | |
| eth3addr=70:ff:76:1d:9b:40 | |
| eth4addr=70:ff:76:1d:9b:41 | |
| ethact=ethernet@46000000port@1 | |
| ethaddr=34:08:e1:59:e3:d5 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fdea05f0 | |
| fdtoverlay_addr_r=0x89000000 | |
| fileaddr=82000000 | |
| filesize=fbfc | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| gatewayip=192.168.0.1 | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| ipaddr=192.168.0.116 | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| netmask=255.255.255.0 | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7200-mcu-r5f0_1-fw 2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000071 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 10485/131067 bytes | |
| => tftp ${loadaddr} 192.168.0.1:vatf_j7200-evm/ddbfb9db45cc797ec4913208c3add362 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.116 | |
| Filename 'vatf_j7200-evm/ddbfb9db45cc797ec4913208c3add362'. | |
| Load address: 0x82000000 | |
| Loading: *################################################## 20.9 MiB | |
| 13.9 MiB/s | |
| done | |
| Bytes transferred = 21926400 (14e9200 hex) | |
| => tftp ${fdt_addr_r} 192.168.0.1:vatf_j7200-evm/5e641da9c499557e7c3354f7fbbddaee | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.116 | |
| Filename 'vatf_j7200-evm/5e641da9c499557e7c3354f7fbbddaee'. | |
| Load address: 0x88000000 | |
| Loading: *################################################## 67.3 KiB | |
| 7.3 MiB/s | |
| done | |
| Bytes transferred = 68922 (10d3a hex) | |
| => fdt address ${fdt_addr_r} | |
| Working FDT set to 88000000 | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| => setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/73bc8e71646c28e1cc799a21af4332b6,nolock,v3,tcp,rsize=4096,wsize=4096 ' | |
| => printenv bootcmd | |
| bootcmd= | |
| => setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => bdinfo | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000004000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed0000 | |
| reloc off = 0x000000007f6d0000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 34:08:e1:59:e3:d5 | |
| IP addr = 192.168.0.116 | |
| fdt_blob = 0x00000000fdea05f0 | |
| new_fdt = 0x00000000fdea05f0 | |
| fdt_size = 0x000000000000f7c0 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xa47fffff], 0x06000000 bytes flags: 4 | |
| reserved[1] [0xfce91000-0xffffffff], 0x0316f000 bytes flags: 0 | |
| reserved[2] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fdea05e0 | |
| sp start = 0x00000000fdea05e0 | |
| Early malloc usage: 2d18 / 8000 | |
| => | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000004000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed0000 | |
| reloc off = 0x000000007f6d0000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 34:08:e1:59:e3:d5 | |
| IP addr = 192.168.0.116 | |
| fdt_blob = 0x00000000fdea05f0 | |
| new_fdt = 0x00000000fdea05f0 | |
| fdt_size = 0x000000000000f7c0 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xa47fffff], 0x06000000 bytes flags: 4 | |
| reserved[1] [0xfce91000-0xffffffff], 0x0316f000 bytes flags: 0 | |
| reserved[2] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fdea05e0 | |
| sp start = 0x00000000fdea05e0 | |
| Early malloc usage: 2d18 / 8000 | |
| => ls mmc 0:1 | |
| => ls mmc 1:1 | |
| EFI/ | |
| 21649920 Image | |
| 531678 tiboot3.bin | |
| 531678 tiboot3-j7200-gp-evm.bin | |
| 534267 tiboot3-j7200_sr2-hs-evm.bin | |
| 534267 tiboot3-j7200_sr2-hs-fs-evm.bin | |
| 1017455 tispl.bin | |
| 1184347 u-boot.img | |
| 574 uEnv.txt | |
| 4 ws-calibrate.rules | |
| 9 file(s), 1 dir(s) | |
| => ext4ls mmc 0:2 /lib/firmware | |
| ** Invalid partition 2 ** | |
| Couldn't find partition mmc 0:2 | |
| => ext4ls mmc 1:2 /lib/firmware | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| 2040 LICENCE.ibt_firmware | |
| 2046 LICENCE.iwlwifi_firmware | |
| 478552 bl32.bin | |
| 4295864 bl32.elf | |
| <DIR> 4096 intel | |
| 918268 iwlwifi-3160-17.ucode | |
| 2448976 iwlwifi-8000C-34.ucode | |
| 2428004 iwlwifi-8000C-36.ucode | |
| 2440780 iwlwifi-8265-34.ucode | |
| 2436632 iwlwifi-8265-36.ucode | |
| 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| 1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| <SYM> 67 j7200-main-r5f0_0-fw | |
| <SYM> 74 j7200-main-r5f0_0-fw-sec | |
| <SYM> 67 j7200-main-r5f0_1-fw | |
| <SYM> 74 j7200-main-r5f0_1-fw-sec | |
| <SYM> 67 j7200-mcu-r5f0_1-fw | |
| <SYM> 74 j7200-mcu-r5f0_1-fw-sec | |
| 4728 regulatory.db | |
| 1182 regulatory.db.p7s | |
| 28 tee-header_v2.bin | |
| 0 tee-pageable_v2.bin | |
| 478552 tee-pager_v2.bin | |
| 478552 tee-raw.bin | |
| 478580 tee.bin | |
| 4295864 tee.elf | |
| <DIR> 4096 ti-connectivity | |
| <DIR> 4096 ti-eth | |
| <DIR> 4096 ti-ipc | |
| => mmc rescan; echo $? | |
| 0 | |
| => fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 | |
| 4 bytes written in 24 ms (0 Bytes/s) | |
| => boot | |
| ## Checking Image at 82000000 ... | |
| Unknown image format! | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008ffec000, end 000000008ffffd39 ... OK | |
| Working FDT set to 8ffec000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc1-next-20231116-00004-g3e504d2927ed (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J7200 EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a47fffff (8192 KiB) nomap non-reusable ipc-memories@a4000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff] | |
| [ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s43304 r8192 d30424 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/73bc8e71646c28e1cc799a21af4332b6,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| [ 0.000000] sysrq: sysrq always enabled. | |
| [ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) | |
| [ 0.000000] Memory: 3894708K/4194304K available (12608K kernel code, 1252K rwdata, 4652K rodata, 2752K init, 500K bss, 266828K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008417] Console: colour dummy device 80x25 | |
| [ 0.012981] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.023653] pid_max: default: 32768 minimum: 301 | |
| [ 0.028411] LSM: initializing lsm=capability,integrity | |
| [ 0.033723] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.041300] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.050191] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.057452] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.065324] rcu: Hierarchical SRCU implementation. | |
| [ 0.070223] rcu: Max phase no-delay instances is 1000. | |
| [ 0.075743] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.081902] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091271] EFI services will not be available. | |
| [ 0.096010] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| [ 0.109166] Detected PIPT I-cache on CPU1 | |
| [ 0.109211] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.109226] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.109261] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.109319] smp: Brought up 1 node, 2 CPUs | |
| [ 0.138669] SMP: Total of 2 processors activated. | |
| [ 0.143474] CPU features: detected: 32-bit EL0 Support | |
| [ 0.148727] CPU features: detected: CRC32 instructions | |
| [ 0.184614] CPU: All CPU(s) started at EL2 | |
| [ 0.188813] alternatives: applying system-wide alternatives | |
| [ 0.195659] devtmpfs: initialized | |
| [ 0.203727] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.213703] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.221311] pinctrl core: initialized pinctrl subsystem | |
| [ 0.226903] DMI not present or invalid. | |
| [ 0.231185] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.237756] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.245074] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.253114] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.261240] audit: initializing netlink subsys (disabled) | |
| [ 0.266863] audit: type=2000 audit(0.168:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.267088] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.274788] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.280945] cpuidle: using governor menu | |
| [ 0.291706] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.298668] ASID allocator initialised with 65536 entries | |
| [ 0.312357] Modules: 27280 pages in range for non-PLT usage | |
| [ 0.312365] Modules: 518800 pages in range for PLT usage | |
| [ 0.318515] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.330882] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.337284] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.344218] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.350620] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.357554] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.363956] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.370890] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.378266] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected | |
| [ 0.387174] iommu: Default domain type: Translated | |
| [ 0.392074] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.398529] SCSI subsystem initialized | |
| [ 0.402543] usbcore: registered new interface driver usbfs | |
| [ 0.408161] usbcore: registered new interface driver hub | |
| [ 0.413601] usbcore: registered new device driver usb | |
| [ 0.419040] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.424112] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.433450] PTP clock support registered | |
| [ 0.437470] EDAC MC: Ver: 3.0.0 | |
| [ 0.440922] scmi_core: SCMI protocol bus registered | |
| [ 0.446088] FPGA manager framework | |
| [ 0.449601] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.456225] vgaarb: loaded | |
| [ 0.459161] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.465527] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.469552] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.479787] NET: Registered PF_INET protocol family | |
| [ 0.485075] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.494089] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.502939] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.510868] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.519094] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.527843] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.534692] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.541613] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.549045] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.555146] RPC: Registered named UNIX socket transport module. | |
| [ 0.561208] RPC: Registered udp transport module. | |
| [ 0.566012] RPC: Registered tcp transport module. | |
| [ 0.570815] RPC: Registered tcp-with-tls transport module. | |
| [ 0.576418] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.583007] PCI: CLS 0 bytes, default 64 | |
| [ 0.587702] Initialise system trusted keyrings | |
| [ 0.592369] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
| [ 0.599128] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.605240] NFS: Registering the id_resolver key type | |
| [ 0.610416] Key type id_resolver registered | |
| [ 0.614689] Key type id_legacy registered | |
| [ 0.618792] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.625641] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.633286] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.660029] Key type asymmetric registered | |
| [ 0.664214] Asymmetric key parser 'x509' registered | |
| [ 0.669222] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 0.676782] io scheduler mq-deadline registered | |
| [ 0.681409] io scheduler kyber registered | |
| [ 0.685522] io scheduler bfq registered | |
| [ 0.690873] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 0.696883] pinctrl-single 4301c038.pinctrl: 2 pins, size 8 | |
| [ 0.702679] pinctrl-single 4301c068.pinctrl: 59 pins, size 236 | |
| [ 0.708775] pinctrl-single 4301c174.pinctrl: 8 pins, size 32 | |
| [ 0.714692] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.720456] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.726157] pinctrl-single 11c000.pinctrl: 67 pins, size 268 | |
| [ 0.732159] pinctrl-single 11c11c.pinctrl: 3 pins, size 12 | |
| [ 0.741596] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.749183] STM32 USART driver initialized | |
| [ 0.756428] loop: module loaded | |
| [ 0.760107] megasas: 07.727.03.00-rc1 | |
| [ 0.765618] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.771145] thunder_xcv, ver 1.0 | |
| [ 0.774461] thunder_bgx, ver 1.0 | |
| [ 0.777764] nicpf, ver 1.0 | |
| [ 0.780742] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.788123] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.793566] hclge is initializing | |
| [ 0.796972] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.801953] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.807839] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.812909] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.818965] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.824480] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.830179] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.836584] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.842696] sky2: driver version 1.30 | |
| [ 0.846878] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.852768] usbcore: registered new interface driver usb-storage | |
| [ 0.859365] i2c_dev: i2c /dev entries driver | |
| [ 0.864743] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.871071] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.875808] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.882197] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.888513] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.894809] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.901847] usbcore: registered new interface driver usbhid | |
| [ 0.907547] usbhid: USB HID core driver | |
| [ 0.912347] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 0.921038] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 0.925594] optee: revision 3.20 (8e74d476) | |
| [ 0.942046] optee: dynamic shared memory is enabled | |
| [ 0.951754] random: crng init done | |
| [ 0.955297] optee: initialized driver | |
| [ 0.960169] NET: Registered PF_PACKET protocol family | |
| [ 0.965408] 9pnet: Installing 9P2000 support | |
| [ 0.969805] Key type dns_resolver registered | |
| [ 0.977595] registered taskstats version 1 | |
| [ 0.981848] Loading compiled-in X.509 certificates | |
| [ 0.992259] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.053349] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.059868] pca953x 1-0021: supply vcc not found, using dummy regulator | |
| [ 1.066715] pca953x 1-0021: using no AI | |
| [ 1.091596] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 1.098410] pca953x 1-0020: using no AI | |
| [ 1.102968] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 1.109781] pca953x 1-0022: using AI | |
| [ 1.114077] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.120224] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 1.127053] pca953x 2-0020: using no AI | |
| [ 1.151488] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 1.157218] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 1.165755] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 1.175095] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 1.183692] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created | |
| [ 1.193036] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235 | |
| [ 1.202933] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.209696] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.220152] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211 | |
| [ 1.230317] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.237076] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.244680] pinctrl-single 4301c000.pinctrl: mux offset out of range: 0xf4 (0x34) | |
| [ 1.252332] pinctrl-single 4301c000.pinctrl: could not add functions for mcu-uart0-default-pins 244x | |
| [ 1.262212] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 271, base_baud = 6000000) is a 8250 | |
| [ 1.271888] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 272, base_baud = 3000000) is a 8250 | |
| [ 1.280828] printk: legacy console [ttyS2] enabled | |
| [ 1.280828] printk: legacy console [ttyS2] enabled | |
| [ 1.290504] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.290504] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.303864] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 273, base_baud = 3000000) is a 8250 | |
| [ 1.313134] 2830000.serial: ttyS0 at MMIO 0x2830000 (irq = 274, base_baud = 3000000) is a 8250 | |
| [ 1.322324] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.367165] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.377156] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.385435] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.398282] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.405491] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.412812] mmc0: CQHCI version 5.10 | |
| [ 1.452939] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 1.461489] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 1.469997] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8) | |
| [ 1.480108] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.523171] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.533170] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.541452] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.554288] mmc0: Command Queue Engine enabled | |
| [ 1.554336] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.558743] mmc0: new HS400 MMC card at address 0001 | |
| [ 1.565940] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.577154] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 1.582562] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 1.584304] mmcblk0: p1 | |
| [ 1.591875] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.593261] debugfs: Directory 'pd:49' with parent 'pm_genpd' already present! | |
| [ 1.597519] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.604686] debugfs: Directory 'pd:240' with parent 'pm_genpd' already present! | |
| [ 1.609527] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (240:0) | |
| [ 1.616959] debugfs: Directory 'pd:35' with parent 'pm_genpd' already present! | |
| [ 1.622764] mmc1: CQHCI version 5.10 | |
| [ 1.674216] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 1.689925] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 1.699405] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 1.752838] mmc1: new ultra high speed SDR104 SDHC card at address aaaa | |
| [ 1.759922] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.768664] mmcblk1: p1 p2 p3 | |
| [ 5.796136] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 5.819163] Sending DHCP requests ., OK | |
| [ 5.839000] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.116 | |
| [ 5.846738] IP-Config: Complete: | |
| [ 5.849958] device=eth0, hwaddr=34:08:e1:59:e3:d5, ipaddr=192.168.0.116, mask=255.255.255.0, gw=192.168.0.1 | |
| [ 5.860112] host=192.168.0.116, domain=ti.com, nis-domain=(none) | |
| [ 5.866536] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= | |
| [ 5.866539] nameserver0=192.0.2.2, nameserver1=192.0.2.3 | |
| [ 5.879230] clk: Disabling unused clocks | |
| [ 5.895009] ALSA device list: | |
| [ 5.897983] No soundcards found. | |
| [ 5.926577] VFS: Mounted root (nfs filesystem) on device 0:21. | |
| [ 5.932733] devtmpfs: mounted | |
| [ 5.937618] Freeing unused kernel memory: 2752K | |
| [ 5.947243] Run /sbin/init as init process | |
| [ 6.088365] systemd[1]: System time before build time, advancing clock. | |
| [ 6.119482] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 6.150902] systemd[1]: Detected architecture arm64. | |
| Welcome to [1mArago 2023.04[0m! | |
| [ 6.216525] systemd[1]: Hostname set to <j7200-evm>. | |
| [ 6.224556] systemd[1]: Initializing machine ID from random generator. | |
| [ 6.324620] systemd[77]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. | |
| [ 6.337217] systemd-sysv-generator[86]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.361486] systemd-sysv-generator[86]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.386539] systemd-sysv-generator[86]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.597894] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.606793] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.640337] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.697440] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.765746] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 6.804232] systemd[1]: Created slice Slice /system/getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. | |
| [ 6.828553] systemd[1]: Created slice Slice /system/modprobe. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. | |
| [ 6.852492] systemd[1]: Created slice Slice /system/serial-getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. | |
| [ 6.876221] systemd[1]: Created slice User and Session Slice. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
| [ 6.899378] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m. | |
| [ 6.923318] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m. | |
| [ 6.947377] systemd[1]: Reached target Path Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. | |
| [ 6.967228] systemd[1]: Reached target Remote File Systems. | |
| [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
| [ 6.987234] systemd[1]: Reached target Slice Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. | |
| [ 7.007223] systemd[1]: Reached target Swaps. | |
| [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. | |
| [ 7.046188] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
| [ 7.071304] systemd[1]: Reached target RPC Port Mapper. | |
| [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
| [ 7.096796] systemd[1]: Listening on Process Core Dump Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m. | |
| [ 7.119425] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
| [ 7.144012] systemd[1]: Listening on Journal Audit Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. | |
| [ 7.167893] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
| [ 7.191547] systemd[1]: Listening on Journal Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
| [ 7.207985] systemd[1]: Listening on Network Service Netlink Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
| [ 7.232818] systemd[1]: Listening on udev Control Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
| [ 7.255445] systemd[1]: Listening on udev Kernel Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
| [ 7.275849] systemd[1]: Listening on User Database Manager Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. | |
| [ 7.319448] systemd[1]: Mounting Huge Pages File System... | |
| Mounting [0;1;39mHuge Pages File System[0m... | |
| [ 7.337699] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
| [ 7.361700] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting [0;1;39mKernel Debug File System[0m... | |
| [ 7.387478] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 7.419475] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting [0;1;39mTemporary Directory /tmp[0m... | |
| [ 7.439485] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed/modules.devname). | |
| [ 7.460248] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting [0;1;39mLoad Kernel Module configfs[0m... | |
| [ 7.503588] systemd[1]: Starting Load Kernel Module drm... | |
| Starting [0;1;39mLoad Kernel Module drm[0m... | |
| [ 7.525664] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting [0;1;39mLoad Kernel Module fuse[0m... | |
| [ 7.575629] systemd[1]: Starting RPC Bind... | |
| Starting [0;1;39mRPC Bind[0m... | |
| [ 7.596596] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 7.635808] systemd[1]: Starting Journal Service... | |
| Starting [0;1;39mJournal Service[0m... | |
| [ 7.652245] systemd[1]: Starting Load Kernel Modules... | |
| Starting [0;1;39mLoad Kernel Modules[0m... | |
| [ 7.679887] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting [0;1;39mGenerate network ts from Kernel command line[0m... | |
| [ 7.706498] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
| [ 7.734731] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting [0;1;39mColdplug All udev Devices[0m... | |
| [ 7.755249] systemd[1]: Started RPC Bind. | |
| [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
| [ 7.771823] systemd[1]: Started Journal Service. | |
| [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. | |
| Mounting [0;1;39mKernel Configuration File System[0m... | |
| Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
| [ 8.055445] systemd-journald[97]: Received client request to flush runtime journal. | |
| Starting [0;1;39mApply Kernel Variables[0m... | |
| Starting [0;1;39mCreate System Users[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. | |
| Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. | |
| Mounting [0;1;39m/media/ram[0m... | |
| Mounting [0;1;39m/var/volatile[0m... | |
| [ 8.329580] audit: type=1334 audit(1651167747.240:2): prog-id=5 op=LOAD | |
| [ 8.336652] audit: type=1334 audit(1651167747.248:3): prog-id=6 op=LOAD | |
| Starting [0;1;39mRule-based Managefor Device Events and Files[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
| Starting [0;1;39mLoad/Save Random Seed[0m... | |
| [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
| Starting [0;1;39mRebuild Dynamic Linker Cache[0m... | |
| Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
| [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. | |
| Starting [0;1;39mRebuild Journal Catalog[0m... | |
| Starting [0;1;39mNetwork Time Synchronization[0m... | |
| Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Journal Catalog[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Dynamic Linker Cache[0m. | |
| Starting [0;1;39mRun pending postinsts[0m... | |
| Starting [0;1;39mUpdate is Completed[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUpdate is Completed[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m... | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m. | |
| Mounting [0;1;39m/run/media/root-mmcblk1p2[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m. | |
| [ 11.780762] EXT4-fs (mmcblk1p2): mounted filesystem 4de34e11-c221-4950-83f6-6fc9d885f8d5 r/w with ordered data mode. Quota mode: none. | |
| Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m. | |
| [ 11.858780] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| Mounting [0;1;39m/run/media/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m. | |
| [ 11.930664] EXT2-fs (mmcblk1p3): warning: mounting unchecked fs, running e2fsck is recommended | |
| [ 11.940167] ext2 filesystem being mounted at /run/media/mmcblk1p3 supports timestamps until 2038-01-19 (0x7fffffff) | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRun pending postinsts[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
| Starting [0;1;39mDocker Socket for the API[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m. | |
| Starting [0;1;39mWeston socket[0m... | |
| Starting [0;1;39mD-Bus System Message Bus[0m... | |
| Starting [0;1;39mReboot and dump vmcore via kexec[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. | |
| [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
| [[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m. | |
| [[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m. | |
| Starting [0;1;39mPrint notice about GPLv3 packages[0m... | |
| Starting [0;1;39mIPv6 Packet Filtering Framework[0m... | |
| Starting [0;1;39mIPv4 Packet Filtering Framework[0m... | |
| [[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m. | |
| Starting [0;1;39mLighttpd Daemon[0m... | |
| [[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m. | |
| [ 12.628049] audit: type=1334 audit(1651167751.540:4): prog-id=7 op=LOAD | |
| [ 12.636655] audit: type=1334 audit(1651167751.544:5): prog-id=8 op=LOAD | |
| Starting [0;1;39mUser Login Management[0m... | |
| [[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m. | |
| Starting [0;1;39mTelnet Server[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. | |
| Starting [0;1;39mNetwork Configuration[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m. | |
| Starting [0;1;39mNetwork Name Resolution[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
| Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
| Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m... | |
| Starting [0;1;39mcontainerd container runtime[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m. | |
| Starting [0;1;39mPermit User Sessions[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m. | |
| See 'systemctl status bt-enable.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. | |
| [[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
| [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
| Starting [0;1;39mSynchronize System and HW clocks[0m... | |
| Starting [0;1;39mWeston, a Waylandositor, as a system service[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 13.826855] audit: type=1334 audit(1651167752.736:6): prog-id=9 op=LOAD | |
| [ 13.833956] audit: type=1334 audit(1651167752.736:7): prog-id=10 op=LOAD | |
| Starting [0;1;39mUser Database Manager[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m. | |
| Starting [0;1;39mUser Runtime Directory /run/user/1000[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m. | |
| Starting [0;1;39mUser Manager for UID 1000[0m... | |
| [ 14.291210] audit: type=1006 audit(1651167753.200:8): pid=536 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 14.306498] audit: type=1300 audit(1651167753.200:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe253dbe8 a2=4 a3=ffff86d36020 items=0 ppid=1 pid=536 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.333494] audit: type=1327 audit(1651167753.200:8): proctitle="(systemd)" | |
| [[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m. | |
| [ 14.656121] audit: type=1006 audit(1651167753.568:9): pid=523 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [ 14.668529] audit: type=1300 audit(1651167753.568:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe253dbe8 a2=4 a3=ffff86d36020 items=0 ppid=1 pid=523 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.695149] audit: type=1327 audit(1651167753.568:9): proctitle="(weston)" | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m. | |
| See 'systemctl status weston.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. | |
| Starting [0;1;39mRecord Runlevel Change in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j7200-evm - | |
| Arago 2023.04 j7200-evm - | |
| j7200-evm login: root | |
| [ 16.270751] audit: type=1006 audit(1651167755.180:10): pid=549 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 16.283410] audit: type=1300 audit(1651167755.180:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe253dbe8 a2=1 a3=ffff86d36020 items=0 ppid=1 pid=549 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| 7[r[999;999H[6nroot@j7200-evm:~# uname -a | |
| Linux j7200-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j7200-evm:~# cat /proc/cmdline | |
| console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/73bc8e71646c28e1cc799a21af4332b6,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| root@j7200-evm:~# uname -a | |
| Linux j7200-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j7200-evm:~# cat /proc/mtd | |
| dev: size erasesize name | |
| root@j7200-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p | |
| pnp /etc/resolv.conf && systemctl restart systemd-resolved | |
| root@j7200-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc | |
| total 26324 | |
| -rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware | |
| -rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 bl32.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 bl32.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 intel | |
| -rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode | |
| -rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode | |
| -rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode | |
| -rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode | |
| -rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode | |
| -rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| -rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| -rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7200-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7200-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7200-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu1_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu1_1_release_strip.xer5f.signed | |
| -rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db | |
| -rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s | |
| -rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin | |
| -rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 tee-pager_v2.bin | |
| -rw-r--r-- 1 root root 432276 Mar 9 2018 tee.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 tee.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc | |
| ls: cannot access '/lib/firmware/ipc': No such file or directory | |
| root@j7200-evm:~# cat /proc/diskstats | |
| 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 179 0 mmcblk0 132 0 7599 60 0 0 0 0 0 196 60 0 0 0 0 0 0 | |
| 179 1 mmcblk0p1 81 0 6351 43 0 0 0 0 0 132 43 0 0 0 0 0 0 | |
| 179 32 mmcblk0boot0 73 0 1344 36 0 0 0 0 0 44 36 0 0 0 0 0 0 | |
| 179 64 mmcblk0boot1 68 0 1344 12 0 0 0 0 0 32 12 0 0 0 0 0 0 | |
| 179 96 mmcblk1 765 32 51733 1580 3 0 24 6 0 932 1586 0 0 0 0 0 0 | |
| 179 97 mmcblk1p1 265 0 16673 545 0 0 0 0 0 564 545 0 0 0 0 0 0 | |
| 179 98 mmcblk1p2 233 32 17186 489 1 0 8 2 0 536 492 0 0 0 0 0 0 | |
| 179 99 mmcblk1p3 228 0 16666 504 2 0 16 3 0 540 507 0 0 0 0 0 0 | |
| root@j7200-evm:~# cat /proc/interrupts | |
| CPU0 CPU1 | |
| 11: 4253 3892 GICv3 30 Level arch_timer | |
| 14: 0 0 GICv3 23 Level arm-pmu | |
| 15: 1345 0 GICv3 69 Level 32c00000.mailbox thr_011 | |
| 36: 164 0 GICv3 928 Level 42120000.i2c | |
| 37: 42 0 GICv3 232 Level 2000000.i2c | |
| 38: 6 0 GICv3 233 Level 2010000.i2c | |
| 39: 63061 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0 | |
| 41: 82172 0 MSI-INTA 15401058 Level 46000000.ethernet | |
| 271: 0 0 GICv3 878 Level 40a00000.serial | |
| 272: 642 0 GICv3 224 Level 2800000.serial | |
| 273: 0 0 GICv3 225 Level 2810000.serial | |
| 274: 0 0 GICv3 227 Level 2830000.serial | |
| 275: 435 0 GICv3 35 Level mmc0 | |
| 366: 0 0 GPIO 84 Edge -davinci_gpio tps6594-0-0x48, tps6594-2-0x4c | |
| 691: 1634 0 GICv3 36 Level mmc1 | |
| IPI0: 1960 9327 Rescheduling interrupts | |
| IPI1: 4830 9859 Function call interrupts | |
| IPI2: 0 0 CPU stop interrupts | |
| IPI3: 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 Timer broadcast interrupts | |
| IPI5: 0 0 IRQ work interrupts | |
| Err: 0 | |
| root@j7200-evm:~# cat /proc/softirqs | |
| CPU0 CPU1 | |
| HI: 0 0 | |
| TIMER: 1380 1535 | |
| NET_TX: 104 4 | |
| NET_RX: 71474 61 | |
| BLOCK: 273 0 | |
| IRQ_POLL: 0 0 | |
| TASKLET: 3965 2 | |
| SCHED: 2059 2012 | |
| HRTIMER: 22 1 | |
| RCU: 4928 7327 | |
| root@j7200-evm:~# ls -lR /run/media/mmcblk0p1 | |
| ls: cannot access '/run/media/mmcblk0p1': No such file or directory | |
| root@j7200-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $? | |
| 1 | |
| root@j7200-evm:~# opkg list-installed | grep ti-test; echo $? | |
| ti-test - 1.0-r0.120 | |
| ti-test-extras - 1.0-r0.120 | |
| 0 | |
| root@j7200-evm:~# depmod -a | |
| depmod: ERROR: could not open directory /lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed: No such file or directory | |
| depmod: FATAL: could not search modules: No such file or directory | |
| root@j7200-evm:~# lsmod | |
| Module Size Used by | |
| root@j7200-evm:~# echo 'hello world' | |
| hello world | |
| root@j7200-evm:~# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| Cicate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 987183 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| Trying to boot from UART | |
| Ccertificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1319011 bytes | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SoC: J721E SR1.1 GP | |
| Model: Texas Instruments K3 J721E SoC | |
| Board: J721EX-PM2-SOM rev E8 | |
| DRAM: 4 GiB | |
| Core: 124 devices, 35 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2800000 | |
| Out: serial@2800000 | |
| Err: serial@2800000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Detected: J7X-BASE-CPB rev E3 | |
| Detected: J7X-VSC8514-ETH rev E2 | |
| cdns,sierra serdes@5000000: sierra probed | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ' | |
| => setenv bootcmd '' | |
| => setenv autoload 'no' | |
| => setenv serverip '192.168.0.1' | |
| => setenv _initramfs - | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j721e | |
| board_rev=E8 | |
| board_serial=0016 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| eth1addr=70:ff:76:1d:9a:9e | |
| eth2addr=70:ff:76:1d:9a:9f | |
| eth3addr=70:ff:76:1d:9a:a0 | |
| eth4addr=70:ff:76:1d:9a:a1 | |
| ethaddr=24:76:25:97:c5:46 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde98430 | |
| fdtoverlay_addr_r=0x89000000 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000016 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 11091/131067 bytes | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled | |
| => setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' | |
| => setenv serverip '192.168.0.1' | |
| => setenv autoload 'no' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 192.168.0.151 (1014 ms) | |
| => setenv dorprocboot '1' | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 79356 bytes read in 32 ms (2.4 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 4 with data@addr=0x82000000 79356 bytes: Success! | |
| 79356 bytes read in 31 ms (2.4 MiB/s) | |
| Load Remote Processor 5 with data@addr=0x82000000 79356 bytes: Success! | |
| 145604 bytes read in 32 ms (4.3 MiB/s) | |
| Load Remote Processor 6 with data@addr=0x82000000 145604 bytes: Success! | |
| 145604 bytes read in 31 ms (4.5 MiB/s) | |
| Load Remote Processor 7 with data@addr=0x82000000 145604 bytes: Success! | |
| 10489000 bytes read in 39 ms (256.5 MiB/s) | |
| Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success! | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721e | |
| board_name=j721e | |
| board_rev=E8 | |
| board_serial=0016 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721e-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dnsip=192.0.2.2 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| eth1addr=70:ff:76:1d:9a:9e | |
| eth2addr=70:ff:76:1d:9a:9f | |
| eth3addr=70:ff:76:1d:9a:a0 | |
| eth4addr=70:ff:76:1d:9a:a1 | |
| ethact=ethernet@46000000port@1 | |
| ethaddr=24:76:25:97:c5:46 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde98430 | |
| fdtoverlay_addr_r=0x89000000 | |
| fileaddr=82000000 | |
| filesize=a00ca8 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| gatewayip=192.168.0.1 | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| ipaddr=192.168.0.151 | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| name_fit=fitImage | |
| name_kern=Image | |
| netmask=255.255.255.0 | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000016 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2800000 | |
| stdin=serial@2800000 | |
| stdout=serial@2800000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 11256/131067 bytes | |
| => tftp ${loadaddr} 192.168.0.1:vatf_j721e-idk-gw2/ddbfb9db45cc797ec4913208c3add362 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.151 | |
| Filename 'vatf_j721e-idk-gw2/ddbfb9db45cc797ec4913208c3add362'. | |
| Load address: 0x82000000 | |
| Loading: *################################################## 20.9 MiB | |
| 13.9 MiB/s | |
| done | |
| Bytes transferred = 21926400 (14e9200 hex) | |
| => tftp ${fdt_addr_r} 192.168.0.1:vatf_j721e-idk-gw2/b7c340a0d30455af75f5507a818986a7 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.151 | |
| Filename 'vatf_j721e-idk-gw2/b7c340a0d30455af75f5507a818986a7'. | |
| Load address: 0x88000000 | |
| Loading: *################################################## 114.4 KiB | |
| 8.6 MiB/s | |
| done | |
| Bytes transferred = 117174 (1c9b6 hex) | |
| => fdt address ${fdt_addr_r} | |
| Working FDT set to 88000000 | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| => setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw-pg1.1/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 ' | |
| => printenv bootcmd | |
| bootcmd= | |
| => setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => bdinfo | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed2000 | |
| reloc off = 0x000000007f6d2000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 24:76:25:97:c5:46 | |
| IP addr = 192.168.0.151 | |
| fdt_blob = 0x00000000fde98430 | |
| new_fdt = 0x00000000fde98430 | |
| fdt_size = 0x0000000000019980 | |
| multi_dtb_fit= 0x0000000000000000 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x4 | |
| reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4 | |
| reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4 | |
| reserved[2] [0xfce89000-0xffffffff], 0x03177000 bytes flags: 0 | |
| reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde98420 | |
| sp start = 0x00000000fde98420 | |
| Early malloc usage: 31f8 / 8000 | |
| => | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x0000000080000000 | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x0000000080000000 | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffed2000 | |
| reloc off = 0x000000007f6d2000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 24:76:25:97:c5:46 | |
| IP addr = 192.168.0.151 | |
| fdt_blob = 0x00000000fde98430 | |
| new_fdt = 0x00000000fde98430 | |
| fdt_size = 0x0000000000019980 | |
| multi_dtb_fit= 0x0000000000000000 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0 | |
| memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| reserved.cnt = 0x4 | |
| reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4 | |
| reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4 | |
| reserved[2] [0xfce89000-0xffffffff], 0x03177000 bytes flags: 0 | |
| reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde98420 | |
| sp start = 0x00000000fde98420 | |
| Early malloc usage: 31f8 / 8000 | |
| => ls mmc 0:1 | |
| 0 file(s), 0 dir(s) | |
| => ls mmc 1:1 | |
| EFI/ | |
| 21649920 Image | |
| 268978 sysfw.itb | |
| 268978 sysfw-j721e-gp-evm.itb | |
| 278254 sysfw-j721e_sr1_1-hs-evm.itb | |
| 269718 sysfw-j721e_sr2-hs-fs-evm.itb | |
| 294385 tiboot3.bin | |
| 294385 tiboot3-j721e-gp-evm.bin | |
| 295160 tiboot3-j721e_sr1_1-hs-evm.bin | |
| 295160 tiboot3-j721e_sr2-hs-fs-evm.bin | |
| 1077291 tispl.bin | |
| 1319011 u-boot.img | |
| 574 uEnv.txt | |
| 4 ws-calibrate.rules | |
| 13 file(s), 1 dir(s) | |
| => ext4ls mmc 0:2 /lib/firmware | |
| => ext4ls mmc 1:2 /lib/firmware | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| 2040 LICENCE.ibt_firmware | |
| 2046 LICENCE.iwlwifi_firmware | |
| 478552 bl32.bin | |
| 4295864 bl32.elf | |
| <DIR> 4096 cadence | |
| <DIR> 4096 intel | |
| 918268 iwlwifi-3160-17.ucode | |
| 2448976 iwlwifi-8000C-34.ucode | |
| 2428004 iwlwifi-8000C-36.ucode | |
| 2440780 iwlwifi-8265-34.ucode | |
| 2436632 iwlwifi-8265-36.ucode | |
| 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| 1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| <SYM> 69 j7-c66_0-fw | |
| <SYM> 76 j7-c66_0-fw-sec | |
| <SYM> 69 j7-c66_1-fw | |
| <SYM> 76 j7-c66_1-fw-sec | |
| <SYM> 65 j7-c71_0-fw | |
| <SYM> 72 j7-c71_0-fw-sec | |
| <SYM> 67 j7-main-r5f0_0-fw | |
| <SYM> 74 j7-main-r5f0_0-fw-sec | |
| <SYM> 67 j7-main-r5f0_1-fw | |
| <SYM> 74 j7-main-r5f0_1-fw-sec | |
| <SYM> 67 j7-main-r5f1_0-fw | |
| <SYM> 74 j7-main-r5f1_0-fw-sec | |
| <SYM> 67 j7-main-r5f1_1-fw | |
| <SYM> 74 j7-main-r5f1_1-fw-sec | |
| <SYM> 67 j7-mcu-r5f0_1-fw | |
| <SYM> 74 j7-mcu-r5f0_1-fw-sec | |
| <SYM> 49 j7-pru0_0-fw | |
| <SYM> 49 j7-pru0_1-fw | |
| <SYM> 49 j7-pru1_0-fw | |
| <SYM> 49 j7-pru1_1-fw | |
| <SYM> 49 j7-rtu0_0-fw | |
| <SYM> 49 j7-rtu0_1-fw | |
| <SYM> 49 j7-rtu1_0-fw | |
| <SYM> 49 j7-rtu1_1-fw | |
| <SYM> 35 j7-txpru0_0-fw | |
| <SYM> 35 j7-txpru0_1-fw | |
| <SYM> 35 j7-txpru1_0-fw | |
| <SYM> 35 j7-txpru1_1-fw | |
| <DIR> 4096 pru | |
| 247469 pvdec_full_bin.fw | |
| 4728 regulatory.db | |
| 1182 regulatory.db.p7s | |
| 131072 rgx.fw.22.104.208.318 | |
| 131072 rgx.fw.22.104.208.318.64k | |
| 382744 rgx.sh.22.104.208.318 | |
| 28 tee-header_v2.bin | |
| 0 tee-pageable_v2.bin | |
| 478552 tee-pager_v2.bin | |
| 478552 tee-raw.bin | |
| 478580 tee.bin | |
| 4295864 tee.elf | |
| <DIR> 4096 ti-connectivity | |
| <DIR> 4096 ti-eth | |
| <DIR> 4096 ti-ipc | |
| => mmc rescan; echo $? | |
| 0 | |
| => fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 | |
| 4 bytes written in 4 ms (1000 Bytes/s) | |
| => boot | |
| ## Checking Image at 82000000 ... | |
| Unknown image format! | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008ffe0000, end 000000008ffff9b5 ... OK | |
| Working FDT set to 8ffe0000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc1-next-20231116-00004-g3e504d2927ed (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J721e EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff] | |
| [ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff] | |
| [ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff] | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s43304 r8192 d30424 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw-pg1.1/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| [ 0.000000] sysrq: sysrq always enabled. | |
| [ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1032192 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB) | |
| [ 0.000000] Memory: 3792244K/4194304K available (12608K kernel code, 1252K rwdata, 4652K rodata, 2752K init, 500K bss, 369292K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008541] Console: colour dummy device 80x25 | |
| [ 0.013105] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.023776] pid_max: default: 32768 minimum: 301 | |
| [ 0.028533] LSM: initializing lsm=capability,integrity | |
| [ 0.033837] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.041407] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) | |
| [ 0.050232] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.057487] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.065339] rcu: Hierarchical SRCU implementation. | |
| [ 0.070236] rcu: Max phase no-delay instances is 1000. | |
| [ 0.075750] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.081993] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091434] EFI services will not be available. | |
| [ 0.096165] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| [ 0.109354] Detected PIPT I-cache on CPU1 | |
| [ 0.109396] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.109407] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.109439] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.109491] smp: Brought up 1 node, 2 CPUs | |
| [ 0.138836] SMP: Total of 2 processors activated. | |
| [ 0.143640] CPU features: detected: 32-bit EL0 Support | |
| [ 0.148894] CPU features: detected: CRC32 instructions | |
| [ 0.184302] CPU: All CPU(s) started at EL2 | |
| [ 0.188499] alternatives: applying system-wide alternatives | |
| [ 0.195213] devtmpfs: initialized | |
| [ 0.205165] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.215141] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.222729] pinctrl core: initialized pinctrl subsystem | |
| [ 0.228278] DMI not present or invalid. | |
| [ 0.232531] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.239065] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.246374] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.254412] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.262534] audit: initializing netlink subsys (disabled) | |
| [ 0.268138] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.268344] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.276058] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.282210] cpuidle: using governor menu | |
| [ 0.292958] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.299914] ASID allocator initialised with 65536 entries | |
| [ 0.316304] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@0/endpoint | |
| [ 0.329020] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000/ports/port@4/endpoint | |
| [ 0.339799] Modules: 27280 pages in range for non-PLT usage | |
| [ 0.339802] Modules: 518800 pages in range for PLT usage | |
| [ 0.345904] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.358268] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.364670] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.371604] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.378005] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.384939] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.391340] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.398274] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.405606] k3-chipinfo 43000014.chipid: Family:J721E rev:SR2.0 JTAGID[0x1bb6402f] Detected | |
| [ 0.414509] iommu: Default domain type: Translated | |
| [ 0.419407] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.425847] SCSI subsystem initialized | |
| [ 0.429835] usbcore: registered new interface driver usbfs | |
| [ 0.435453] usbcore: registered new interface driver hub | |
| [ 0.440892] usbcore: registered new device driver usb | |
| [ 0.446401] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.451471] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.460809] PTP clock support registered | |
| [ 0.464829] EDAC MC: Ver: 3.0.0 | |
| [ 0.468253] scmi_core: SCMI protocol bus registered | |
| [ 0.473410] FPGA manager framework | |
| [ 0.476916] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.483508] vgaarb: loaded | |
| [ 0.486419] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.492766] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.496788] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.506885] NET: Registered PF_INET protocol family | |
| [ 0.512012] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.520969] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) | |
| [ 0.529804] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.537728] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.545928] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear) | |
| [ 0.554489] TCP: Hash tables configured (established 32768 bind 32768) | |
| [ 0.561256] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.568165] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) | |
| [ 0.575592] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.581650] RPC: Registered named UNIX socket transport module. | |
| [ 0.587706] RPC: Registered udp transport module. | |
| [ 0.592509] RPC: Registered tcp transport module. | |
| [ 0.597312] RPC: Registered tcp-with-tls transport module. | |
| [ 0.602915] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.609503] PCI: CLS 0 bytes, default 64 | |
| [ 0.614114] Initialise system trusted keyrings | |
| [ 0.618751] workingset: timestamp_bits=46 max_order=20 bucket_order=0 | |
| [ 0.625492] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.631578] NFS: Registering the id_resolver key type | |
| [ 0.636749] Key type id_resolver registered | |
| [ 0.641021] Key type id_legacy registered | |
| [ 0.645123] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.651972] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.659602] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.686346] Key type asymmetric registered | |
| [ 0.690529] Asymmetric key parser 'x509' registered | |
| [ 0.695534] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 0.703094] io scheduler mq-deadline registered | |
| [ 0.707720] io scheduler kyber registered | |
| [ 0.711831] io scheduler bfq registered | |
| [ 0.717606] pinctrl-single 4301c000.pinctrl: 94 pins, size 376 | |
| [ 0.724010] pinctrl-single 11c000.pinctrl: 173 pins, size 692 | |
| [ 0.730323] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.736079] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.746065] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.753742] STM32 USART driver initialized | |
| [ 0.758509] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf) | |
| [ 0.766692] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq | |
| [ 0.773726] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq | |
| [ 0.781439] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs | |
| [ 0.792193] loop: module loaded | |
| [ 0.795940] megasas: 07.727.03.00-rc1 | |
| [ 0.801707] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.807312] thunder_xcv, ver 1.0 | |
| [ 0.810622] thunder_bgx, ver 1.0 | |
| [ 0.813920] nicpf, ver 1.0 | |
| [ 0.816973] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.824355] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.829797] hclge is initializing | |
| [ 0.833192] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.838173] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.844055] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.849125] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.855180] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.860694] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.866395] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.872798] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.878923] sky2: driver version 1.30 | |
| [ 0.883170] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.889133] usbcore: registered new interface driver usb-storage | |
| [ 0.895805] i2c_dev: i2c /dev entries driver | |
| [ 0.901325] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.907644] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.912425] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.918864] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.925283] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.931597] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 0.938655] usbcore: registered new interface driver usbhid | |
| [ 0.944353] usbhid: USB HID core driver | |
| [ 0.949141] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 0.957884] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 0.962440] optee: revision 3.20 (8e74d476) | |
| [ 0.978864] optee: dynamic shared memory is enabled | |
| [ 0.988534] random: crng init done | |
| [ 0.992067] optee: initialized driver | |
| [ 0.995981] mmio-mux 47000004.mux-controller: failed to get regmap: -19 | |
| [ 1.003778] NET: Registered PF_PACKET protocol family | |
| [ 1.008999] 9pnet: Installing 9P2000 support | |
| [ 1.013387] Key type dns_resolver registered | |
| [ 1.021093] registered taskstats version 1 | |
| [ 1.025334] Loading compiled-in X.509 certificates | |
| [ 1.035820] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.136173] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.142495] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 1.149319] pca953x 1-0020: using no AI | |
| [ 1.175123] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 1.181928] pca953x 1-0022: using AI | |
| [ 1.186764] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.192929] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz | |
| [ 1.199054] pca953x 3-0020: supply vcc not found, using dummy regulator | |
| [ 1.205871] pca953x 3-0020: using no AI | |
| [ 1.230911] omap_i2c 2030000.i2c: bus 3 rev0.12 at 400 kHz | |
| [ 1.237076] pca953x 4-0020: supply vcc not found, using dummy regulator | |
| [ 1.243896] pca953x 4-0020: using no AI | |
| [ 1.270738] omap_i2c 2060000.i2c: bus 4 rev0.12 at 400 kHz | |
| [ 1.276480] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created | |
| [ 1.285029] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created | |
| [ 1.294378] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created | |
| [ 1.302989] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created | |
| [ 1.312676] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235 | |
| [ 1.322568] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.329329] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.338915] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211 | |
| [ 1.349068] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.355826] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64 | |
| [ 1.363944] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250 | |
| [ 1.373547] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250 | |
| [ 1.382461] printk: legacy console [ttyS2] enabled | |
| [ 1.382461] printk: legacy console [ttyS2] enabled | |
| [ 1.392134] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.392134] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.407083] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250 | |
| [ 1.416266] 2820000.serial: ttyS0 at MMIO 0x2820000 (irq = 216, base_baud = 3000000) is a 8250 | |
| [ 1.425226] omap8250 2840000.serial: unable to register 8250 port | |
| [ 1.431375] omap8250: probe of 2840000.serial failed with error -28 | |
| [ 1.438944] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.482425] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.491979] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.500252] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.513060] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.520267] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.527529] mmc0: CQHCI version 5.10 | |
| [ 1.567804] pca953x 2-0020: supply vcc not found, using dummy regulator | |
| [ 1.569019] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 1.574483] pca953x 2-0020: using no AI | |
| [ 1.607770] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 1.619009] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16) | |
| [ 1.632951] spi-nor spi0.0: mt35xu512aba (65536 Kbytes) | |
| [ 1.638558] 8 fixed-partitions partitions found on MTD device 47040000.spi.0 | |
| [ 1.645657] Creating 8 MTD partitions on "47040000.spi.0": | |
| [ 1.651137] 0x000000000000-0x000000080000 : "ospi.tiboot3" | |
| [ 1.657213] 0x000000080000-0x000000280000 : "ospi.tispl" | |
| [ 1.663029] 0x000000280000-0x000000680000 : "ospi.u-boot" | |
| [ 1.668887] 0x000000680000-0x0000006a0000 : "ospi.env" | |
| [ 1.674468] 0x0000006a0000-0x0000006c0000 : "ospi.env.backup" | |
| [ 1.680690] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw" | |
| [ 1.686466] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 1.692347] 0x000003fe0000-0x000004000000 : "ospi.phypattern" | |
| [ 1.699187] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.711972] mmc0: Command Queue Engine enabled | |
| [ 1.716418] mmc0: new HS200 MMC card at address 0001 | |
| [ 1.721661] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 1.727112] mmcblk0: p1 p2 p3 | |
| [ 1.730517] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.735975] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.741380] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (240:0) | |
| [ 1.742443] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.757195] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.765473] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000 | |
| [ 1.778286] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.785493] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.792423] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 1.800970] mmc1: CQHCI version 5.10 | |
| [ 1.803293] input: gpio-keys as /devices/platform/gpio-keys/input/input0 | |
| [ 1.842957] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 1.857220] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 1.866691] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 1.905363] mmc1: new ultra high speed DDR50 SDHC card at address aaaa | |
| [ 1.912277] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.920813] mmcblk1: p1 p2 p3 | |
| [ 5.951204] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 5.978423] Sending DHCP requests ., OK | |
| [ 5.998256] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.151 | |
| [ 6.005992] IP-Config: Complete: | |
| [ 6.009211] device=eth0, hwaddr=24:76:25:97:c5:46, ipaddr=192.168.0.151, mask=255.255.255.0, gw=192.168.0.1 | |
| [ 6.019368] host=192.168.0.151, domain=ti.com, nis-domain=(none) | |
| [ 6.025792] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= | |
| [ 6.025795] nameserver0=192.0.2.2, nameserver1=192.0.2.3 | |
| [ 6.038484] clk: Disabling unused clocks | |
| [ 6.068267] ALSA device list: | |
| [ 6.071232] No soundcards found. | |
| [ 6.099876] VFS: Mounted root (nfs filesystem) on device 0:21. | |
| [ 6.106014] devtmpfs: mounted | |
| [ 6.110130] Freeing unused kernel memory: 2752K | |
| [ 6.122494] Run /sbin/init as init process | |
| [ 6.255019] systemd[1]: System time before build time, advancing clock. | |
| [ 6.285400] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 6.316775] systemd[1]: Detected architecture arm64. | |
| Welcome to [1mArago 2023.04[0m! | |
| [ 6.375618] systemd[1]: Hostname set to <j721e-evm>. | |
| [ 6.383807] systemd[1]: Initializing machine ID from random generator. | |
| [ 6.477584] systemd[77]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. | |
| [ 6.490449] systemd-sysv-generator[86]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.514983] systemd-sysv-generator[86]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.540044] systemd-sysv-generator[86]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.736449] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.745342] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.775726] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.829398] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.893368] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 6.930791] systemd[1]: Created slice Slice /system/getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. | |
| [ 6.951791] systemd[1]: Created slice Slice /system/modprobe. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. | |
| [ 6.975733] systemd[1]: Created slice Slice /system/serial-getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. | |
| [ 6.999446] systemd[1]: Created slice User and Session Slice. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
| [ 7.022622] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m. | |
| [ 7.046560] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m. | |
| [ 7.070620] systemd[1]: Reached target Path Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. | |
| [ 7.090494] systemd[1]: Reached target Remote File Systems. | |
| [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
| [ 7.110494] systemd[1]: Reached target Slice Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. | |
| [ 7.126497] systemd[1]: Reached target Swaps. | |
| [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. | |
| [ 7.165133] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
| [ 7.190540] systemd[1]: Reached target RPC Port Mapper. | |
| [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
| [ 7.215960] systemd[1]: Listening on Process Core Dump Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m. | |
| [ 7.238648] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
| [ 7.263206] systemd[1]: Listening on Journal Audit Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. | |
| [ 7.283082] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
| [ 7.306748] systemd[1]: Listening on Journal Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
| [ 7.323139] systemd[1]: Listening on Network Service Netlink Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
| [ 7.347665] systemd[1]: Listening on udev Control Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
| [ 7.370696] systemd[1]: Listening on udev Kernel Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
| [ 7.390999] systemd[1]: Listening on User Database Manager Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. | |
| [ 7.434671] systemd[1]: Mounting Huge Pages File System... | |
| Mounting [0;1;39mHuge Pages File System[0m... | |
| [ 7.452806] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
| [ 7.476853] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting [0;1;39mKernel Debug File System[0m... | |
| [ 7.494691] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 7.510748] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting [0;1;39mTemporary Directory /tmp[0m... | |
| [ 7.526710] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed/modules.devname). | |
| [ 7.582808] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting [0;1;39mLoad Kernel Module configfs[0m... | |
| [ 7.604711] systemd[1]: Starting Load Kernel Module drm... | |
| Starting [0;1;39mLoad Kernel Module drm[0m... | |
| [ 7.646788] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting [0;1;39mLoad Kernel Module fuse[0m... | |
| [ 7.669911] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting [0;1;39mStart psplash boot splash screen[0m... | |
| [ 7.710898] systemd[1]: Starting RPC Bind... | |
| Starting [0;1;39mRPC Bind[0m... | |
| [ 7.732597] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 7.749502] systemd[1]: Starting Journal Service... | |
| Starting [0;1;39mJournal Service[0m... | |
| [ 7.794903] systemd[1]: Starting Load Kernel Modules... | |
| Starting [0;1;39mLoad Kernel Modules[0m... | |
| [ 7.819683] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting [0;1;39mGenerate network ts from Kernel command line[0m... | |
| [ 7.845236] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
| [ 7.873499] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting [0;1;39mColdplug All udev Devices[0m... | |
| [ 7.898944] systemd[1]: Started RPC Bind. | |
| [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
| [ 7.918853] systemd[1]: Started Journal Service. | |
| [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m. | |
| See 'systemctl status psplash-start.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. | |
| Mounting [0;1;39mKernel Configuration File System[0m... | |
| Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
| Starting [0;1;39mApply Kernel Variables[0m... | |
| [ 8.250052] systemd-journald[99]: Received client request to flush runtime journal. | |
| Starting [0;1;39mCreate System Users[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. | |
| Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. | |
| Mounting [0;1;39m/media/ram[0m... | |
| Mounting [0;1;39m/var/volatile[0m... | |
| [ 8.488810] audit: type=1334 audit(1651167747.232:2): prog-id=5 op=LOAD | |
| [ 8.495820] audit: type=1334 audit(1651167747.240:3): prog-id=6 op=LOAD | |
| Starting [0;1;39mRule-based Managefor Device Events and Files[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
| Starting [0;1;39mLoad/Save Random Seed[0m... | |
| [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
| Starting [0;1;39mRebuild Dynamic Linker Cache[0m... | |
| Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
| [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. | |
| Starting [0;1;39mRebuild Journal Catalog[0m... | |
| Starting [0;1;39mNetwork Time Synchronization[0m... | |
| Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Journal Catalog[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Dynamic Linker Cache[0m. | |
| Starting [0;1;39mRun pending postinsts[0m... | |
| Starting [0;1;39mUpdate is Completed[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUpdate is Completed[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p3[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p3[0m... | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p2[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p3[0m. | |
| Mounting [0;1;39m/run/media/mmcblk0p3[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p2[0m... | |
| [ 12.496614] EXT4-fs (mmcblk0p3): mounted filesystem 30e94f9e-7efb-4241-acad-8e772aeb99cd r/w with ordered data mode. Quota mode: none. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p3[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p2[0m. | |
| Mounting [0;1;39m/run/media/mmcblk0p1[0m... | |
| Mounting [0;1;39m/run/media/mmcblk0p2[0m... | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m. | |
| [ 12.630228] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [ 12.650241] FAT-fs (mmcblk0p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p1[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m. | |
| Mounting [0;1;39m/run/media/mmcblk1p3[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m... | |
| [ 12.833391] EXT4-fs (mmcblk1p3): mounted filesystem 1d27b5d7-d799-4a0c-9d55-01106c1e0e42 r/w with ordered data mode. Quota mode: none. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m. | |
| Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m... | |
| Mounting [0;1;39m/run/media/root-mmcblk1p2[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRun pending postinsts[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
| [ 13.035500] EXT4-fs (mmcblk1p2): mounted filesystem 4e0fc108-ebb1-4046-917b-1e18be5f2f07 r/w with ordered data mode. Quota mode: none. | |
| [ 13.035885] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
| Starting [0;1;39mDocker Socket for the API[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m. | |
| Starting [0;1;39mWeston socket[0m... | |
| Starting [0;1;39mD-Bus System Message Bus[0m... | |
| Starting [0;1;39mReboot and dump vmcore via kexec[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
| [[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m. | |
| [[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m. | |
| Starting [0;1;39mPrint notice about GPLv3 packages[0m... | |
| Starting [0;1;39mIPv6 Packet Filtering Framework[0m... | |
| Starting [0;1;39mIPv4 Packet Filtering Framework[0m... | |
| [[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m. | |
| Starting [0;1;39mLighttpd Daemon[0m... | |
| [[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m. | |
| [ 13.559510] audit: type=1334 audit(1651167752.300:4): prog-id=7 op=LOAD | |
| [ 13.566603] audit: type=1334 audit(1651167752.304:5): prog-id=8 op=LOAD | |
| Starting [0;1;39mUser Login Management[0m... | |
| [[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m. | |
| Starting [0;1;39mTelnet Server[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. | |
| Starting [0;1;39mNetwork Configuration[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m. | |
| Starting [0;1;39mNetwork Name Resolution[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
| Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
| Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m... | |
| Starting [0;1;39mcontainerd container runtime[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m. | |
| Starting [0;1;39mPermit User Sessions[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m. | |
| See 'systemctl status bt-enable.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. | |
| [[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
| [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
| Starting [0;1;39mSynchronize System and HW clocks[0m... | |
| Starting [0;1;39mWeston, a Waylandositor, as a system service[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 14.670100] audit: type=1334 audit(1651167753.412:6): prog-id=9 op=LOAD | |
| [ 14.677907] audit: type=1334 audit(1651167753.412:7): prog-id=10 op=LOAD | |
| Starting [0;1;39mUser Database Manager[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m. | |
| Starting [0;1;39mUser Runtime Directory /run/user/1000[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m. | |
| Starting [0;1;39mUser Manager for UID 1000[0m... | |
| [ 15.130097] audit: type=1006 audit(1651167753.872:8): pid=788 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 15.142866] audit: type=1300 audit(1651167753.872:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd847f298 a2=4 a3=ffffae9de020 items=0 ppid=1 pid=788 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.171118] audit: type=1327 audit(1651167753.872:8): proctitle="(systemd)" | |
| [[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m. | |
| [ 15.550933] audit: type=1006 audit(1651167754.296:9): pid=775 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [ 15.563316] audit: type=1300 audit(1651167754.296:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd847f298 a2=4 a3=ffffae9de020 items=0 ppid=1 pid=775 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.589564] audit: type=1327 audit(1651167754.296:9): proctitle="(weston)" | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m. | |
| See 'systemctl status weston.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. | |
| Starting [0;1;39mRecord Runlevel Change in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j721e-evm - | |
| Arago 2023.04 j721e-evm - | |
| j721e-evm login: root | |
| 7[r[999;999H[6nroot@j721e-evm:~# uname -a | |
| Linux j721e-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721e-evm:~# cat /proc/cmdline | |
| console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw-pg1.1/autofs/1f8d76b580ac320b118dabdd17d3c033,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| root@j721e-evm:~# uname -a | |
| Linux j721e-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721e-evm:~# cat /proc/mtd | |
| dev: size erasesize name | |
| mtd0: 00080000 00001000 "ospi.tiboot3" | |
| mtd1: 00200000 00001000 "ospi.tispl" | |
| mtd2: 00400000 00001000 "ospi.u-boot" | |
| mtd3: 00020000 00001000 "ospi.env" | |
| mtd4: 00020000 00001000 "ospi.env.backup" | |
| mtd5: 00100000 00001000 "ospi.sysfw" | |
| mtd6: 037c0000 00001000 "ospi.rootfs" | |
| mtd7: 00020000 00001000 "ospi.phypattern" | |
| root@j721e-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p | |
| pnp /etc/resolv.conf && systemctl restart systemd-resolved | |
| root@j721e-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc | |
| total 27228 | |
| -rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware | |
| -rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 bl32.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 bl32.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 intel | |
| -rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode | |
| -rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode | |
| -rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode | |
| -rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode | |
| -rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode | |
| -rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| -rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| -rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66 | |
| lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66.signed | |
| lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66 | |
| lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66.signed | |
| lrwxrwxrwx 1 root root 65 Mar 9 2018 j7-c71_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 72 Mar 9 2018 j7-c71_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_1.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_0.out | |
| lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_1.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out | |
| lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 pru | |
| -rw-r--r-- 1 root root 247469 Mar 9 2018 pvdec_full_bin.fw | |
| -rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db | |
| -rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s | |
| -rw-r--r-- 1 root root 122880 Mar 9 2018 rgx.fw.22.104.208.318 | |
| -rw-r--r-- 1 root root 118784 Mar 9 2018 rgx.fw.22.104.208.318.64k | |
| -rw-r--r-- 1 root root 382744 Mar 9 2018 rgx.sh.22.104.208.318 | |
| -rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin | |
| -rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 tee-pager_v2.bin | |
| -rw-r--r-- 1 root root 432276 Mar 9 2018 tee.bin | |
| -rw-r--r-- 1 root root 4105600 Mar 9 2018 tee.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc | |
| ls: cannot access '/lib/firmware/ipc': No such file or directory | |
| root@j721e-evm:~# cat /proc/diskstats | |
| 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 31 0 mtdblock0 22 0 176 18 0 0 0 0 0 24 18 0 0 0 0 0 0 | |
| 31 1 mtdblock1 28 0 224 17 0 0 0 0 0 20 17 0 0 0 0 0 0 | |
| 31 2 mtdblock2 58 0 464 45 0 0 0 0 0 52 45 0 0 0 0 0 0 | |
| 31 3 mtdblock3 9 0 72 10 0 0 0 0 0 12 10 0 0 0 0 0 0 | |
| 31 4 mtdblock4 27 0 216 50 0 0 0 0 0 68 50 0 0 0 0 0 0 | |
| 31 5 mtdblock5 26 0 208 21 0 0 0 0 0 28 21 0 0 0 0 0 0 | |
| 31 6 mtdblock6 78 0 624 142 0 0 0 0 0 144 142 0 0 0 0 0 0 | |
| 31 7 mtdblock7 18 0 144 13 0 0 0 0 0 20 13 0 0 0 0 0 0 | |
| 179 0 mmcblk0 869 1 57659 552 2 0 8 2 0 680 556 0 0 0 0 1 1 | |
| 179 1 mmcblk0p1 274 0 18805 178 0 0 0 0 0 332 178 0 0 0 0 0 0 | |
| 179 2 mmcblk0p2 290 0 18812 181 0 0 0 0 0 336 181 0 0 0 0 0 0 | |
| 179 3 mmcblk0p3 266 1 18834 177 2 0 8 2 0 292 180 0 0 0 0 0 0 | |
| 179 32 mmcblk0boot0 68 0 1344 52 0 0 0 0 0 72 52 0 0 0 0 0 0 | |
| 179 64 mmcblk0boot1 34 0 672 12 0 0 0 0 0 16 12 0 0 0 0 0 0 | |
| 179 96 mmcblk1 680 36 45595 2208 2 0 16 2 0 1212 2211 0 0 0 0 0 0 | |
| 179 97 mmcblk1p1 236 0 14593 750 0 0 0 0 0 688 750 0 0 0 0 0 0 | |
| 179 98 mmcblk1p2 199 34 15144 734 1 0 8 0 0 752 735 0 0 0 0 0 0 | |
| 179 99 mmcblk1p3 206 2 14650 656 1 0 8 2 0 688 658 0 0 0 0 0 0 | |
| root@j721e-evm:~# cat /proc/interrupts | |
| CPU0 CPU1 | |
| 11: 4207 4591 GICv3 30 Level arch_timer | |
| 14: 0 0 GICv3 804 Edge arm-smmu-v3-evtq | |
| 15: 0 0 GICv3 800 Edge arm-smmu-v3-gerror | |
| 16: 0 0 GICv3 23 Level arm-pmu | |
| 17: 2067 0 GICv3 69 Level 32c00000.mailbox thr_011 | |
| 38: 172 0 GICv3 928 Level 42120000.i2c | |
| 39: 47 0 GICv3 232 Level 2000000.i2c | |
| 40: 17 0 GICv3 233 Level 2010000.i2c | |
| 41: 6 0 GICv3 235 Level 2030000.i2c | |
| 42: 6 0 GICv3 238 Level 2060000.i2c | |
| 43: 58943 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0 | |
| 45: 96150 0 MSI-INTA 15401058 Level 46000000.ethernet | |
| 63: 2131 0 MSI-INTA 13828536 Level 31150000.dma-controller chan0 | |
| 213: 0 0 GICv3 878 Level 40a00000.serial | |
| 214: 748 0 GICv3 224 Level 2800000.serial | |
| 215: 0 0 GICv3 225 Level 2810000.serial | |
| 216: 0 0 GICv3 226 Level 2820000.serial | |
| 218: 2 0 GICv3 872 Level 47040000.spi | |
| 219: 1161 0 GICv3 35 Level mmc0 | |
| 233: 0 0 GPIO 7 Edge -davinci_gpio GPIO Key USER2 | |
| 235: 0 0 GPIO 9 Edge -davinci_gpio tps6594-0-0x48, tps6594-0-0x4c | |
| 318: 0 0 GPIO 0 Edge -davinci_gpio GPIO Key USER1 | |
| 460: 0 0 GPIO 11 Edge -davinci_gpio 2-0020 | |
| 810: 1461 0 GICv3 36 Level mmc1 | |
| IPI0: 3032 9252 Rescheduling interrupts | |
| IPI1: 4664 13519 Function call interrupts | |
| IPI2: 0 0 CPU stop interrupts | |
| IPI3: 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 Timer broadcast interrupts | |
| IPI5: 0 0 IRQ work interrupts | |
| Err: 0 | |
| root@j721e-evm:~# cat /proc/softirqs | |
| CPU0 CPU1 | |
| HI: 0 0 | |
| TIMER: 1403 1750 | |
| NET_TX: 73 3 | |
| NET_RX: 99440 21 | |
| BLOCK: 970 0 | |
| IRQ_POLL: 0 0 | |
| TASKLET: 5232 1 | |
| SCHED: 2119 2074 | |
| HRTIMER: 0 0 | |
| RCU: 6295 8274 | |
| root@j721e-evm:~# ls -lR /run/media/mmcblk0p1 | |
| /run/media/mmcblk0p1: | |
| total 0 | |
| root@j721e-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $? | |
| 1 | |
| root@j721e-evm:~# opkg list-installed | grep ti-test; echo $? | |
| ti-test - 1.0-r0.121 | |
| ti-test-extras - 1.0-r0.121 | |
| 0 | |
| root@j721e-evm:~# depmod -a | |
| depmod: ERROR: could not open directory /lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed: No such file or directory | |
| depmod: FATAL: could not search modules: No such file or directory | |
| root@j721e-evm:~# lsmod | |
| Module Size Used by | |
| root@j721e-evm:~# echo 'hello world' | |
| hello world | |
| root@j721e-evm:~# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| SPL initial stack usage: 13424 bytes | |
| Trying to boot from UART | |
| Cficate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1002255 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| Certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1329403 bytes | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SoC: J721S2 SR1.0 GP | |
| Model: Texas Instruments J721S2 EVM | |
| Board: J721S2X-PM1-SOM rev E1 | |
| DRAM: 16 GiB | |
| Core: 89 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2880000 | |
| Out: serial@2880000 | |
| Err: serial@2880000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ' | |
| => setenv bootcmd '' | |
| => setenv autoload 'no' | |
| => setenv serverip '192.168.0.1' | |
| => setenv _initramfs - | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ospi_nand=setenv bootargs console=${console} ${optargs} ubi.mtd=${ospi_nand_bootpart} root=${ospi_nand_bootvolume} rootfstype=ubifs | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721s2 | |
| board_name=j721s2 | |
| board_rev=E1 | |
| board_serial=0066 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721s2-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethaddr=f4:84:4c:fb:3e:9f | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde70d90 | |
| fdtoverlay_addr_r=0x89000000 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721s2; then setenv name_fdt ti/k3-j721s2-common-proc-board.dtb; fi; if test $board_name = am68-sk; then setenv name_fdt ti/k3-am68-sk-base-board.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ospi_nand=ubifsload ${fdtaddr} ${bootdir}/dtb/${fdtfile}; | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_ospi_nand=ubifsload ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ospi_nand=ubifsload ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ospi_nand=fdt address ${fdtaddr} fdt resize 0x100000; for overlay in $name_overlays; do; ubifsload ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_mmc=run args_all args_mmc | |
| init_ospi_nand=run args_all args_ospi_nand ospi_nand_ubi_init | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| mtdids=nor0=47040000.spi.0,nand0=spi-nand0 | |
| mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) | |
| name_fit=fitImage | |
| name_kern=Image | |
| ospi_nand_bootpart=ospi_nand.rootfs | |
| ospi_nand_bootvolume=ubi0:rootfs | |
| ospi_nand_ubi_init=ubi part ${ospi_nand_bootpart}; ubifsmount ${ospi_nand_bootvolume}; | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j721s2-mcu-r5f0_1-fw 2 /lib/firmware/j721s2-main-r5f0_0-fw 3 /lib/firmware/j721s2-main-r5f0_1-fw 4 /lib/firmware/j721s2-main-r5f1_0-fw 5 /lib/firmware/j721s2-main-r5f1_1-fw 6 /lib/firmware/j721s2-c71_0-fw 7 /lib/firmware/j721s2-c71_1-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000066 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2880000 | |
| stdin=serial@2880000 | |
| stdout=serial@2880000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 11491/262139 bytes | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled | |
| => setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' | |
| => setenv serverip '192.168.0.1' | |
| => setenv autoload 'no' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 192.168.0.201 (1045 ms) | |
| => setenv dorprocboot '1' | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 67324 bytes read in 23 ms (2.8 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 67324 bytes: Success! | |
| 67324 bytes read in 23 ms (2.8 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 67324 bytes: Success! | |
| 67324 bytes read in 22 ms (2.9 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 67324 bytes: Success! | |
| 67324 bytes read in 23 ms (2.8 MiB/s) | |
| Load Remote Processor 4 with data@addr=0x82000000 67324 bytes: Success! | |
| 67324 bytes read in 23 ms (2.8 MiB/s) | |
| Load Remote Processor 5 with data@addr=0x82000000 67324 bytes: Success! | |
| 10488888 bytes read in 30 ms (333.4 MiB/s) | |
| Load Remote Processor 6 with data@addr=0x82000000 10488888 bytes: Success! | |
| 10488888 bytes read in 30 ms (333.4 MiB/s) | |
| Load Remote Processor 7 with data@addr=0x82000000 10488888 bytes: Success! | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ospi_nand=setenv bootargs console=${console} ${optargs} ubi.mtd=${ospi_nand_bootpart} root=${ospi_nand_bootvolume} rootfstype=ubifs | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j721s2 | |
| board_name=j721s2 | |
| board_rev=E1 | |
| board_serial=0066 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j721s2-common-proc-board.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dnsip=192.0.2.2 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethact=ethernet@46000000port@1 | |
| ethaddr=f4:84:4c:fb:3e:9f | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde70d90 | |
| fdtoverlay_addr_r=0x89000000 | |
| fileaddr=82000000 | |
| filesize=a00c38 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721s2; then setenv name_fdt ti/k3-j721s2-common-proc-board.dtb; fi; if test $board_name = am68-sk; then setenv name_fdt ti/k3-am68-sk-base-board.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| gatewayip=192.168.0.1 | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ospi_nand=ubifsload ${fdtaddr} ${bootdir}/dtb/${fdtfile}; | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_ospi_nand=ubifsload ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ospi_nand=ubifsload ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ospi_nand=fdt address ${fdtaddr} fdt resize 0x100000; for overlay in $name_overlays; do; ubifsload ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_mmc=run args_all args_mmc | |
| init_ospi_nand=run args_all args_ospi_nand ospi_nand_ubi_init | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| ipaddr=192.168.0.201 | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| mtdids=nor0=47040000.spi.0,nand0=spi-nand0 | |
| mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) | |
| name_fit=fitImage | |
| name_kern=Image | |
| netmask=255.255.255.0 | |
| ospi_nand_bootpart=ospi_nand.rootfs | |
| ospi_nand_bootvolume=ubi0:rootfs | |
| ospi_nand_ubi_init=ubi part ${ospi_nand_bootpart}; ubifsmount ${ospi_nand_bootvolume}; | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j721s2-mcu-r5f0_1-fw 2 /lib/firmware/j721s2-main-r5f0_0-fw 3 /lib/firmware/j721s2-main-r5f0_1-fw 4 /lib/firmware/j721s2-main-r5f1_0-fw 5 /lib/firmware/j721s2-main-r5f1_1-fw 6 /lib/firmware/j721s2-c71_0-fw 7 /lib/firmware/j721s2-c71_1-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000066 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| stderr=serial@2880000 | |
| stdin=serial@2880000 | |
| stdout=serial@2880000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 11656/262139 bytes | |
| => tftp ${loadaddr} 192.168.0.1:vatf_j721s2-evm/ddbfb9db45cc797ec4913208c3add362 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.201 | |
| Filename 'vatf_j721s2-evm/ddbfb9db45cc797ec4913208c3add362'. | |
| Load address: 0x82000000 | |
| Loading: *################################################## 20.9 MiB | |
| 12.4 MiB/s | |
| done | |
| Bytes transferred = 21926400 (14e9200 hex) | |
| => tftp ${fdt_addr_r} 192.168.0.1:vatf_j721s2-evm/f4db6054867188d397ac72a09001bf64 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.201 | |
| Filename 'vatf_j721s2-evm/f4db6054867188d397ac72a09001bf64'. | |
| Load address: 0x88000000 | |
| Loading: *################################################## 90.4 KiB | |
| 8.8 MiB/s | |
| done | |
| Bytes transferred = 92582 (169a6 hex) | |
| => fdt address ${fdt_addr_r} | |
| Working FDT set to 88000000 | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| => setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721s2-evm/autofs/9f4ea228818d776413fb59498a628176,nolock,v3,tcp,rsize=4096,wsize=4096 ' | |
| => printenv bootcmd | |
| bootcmd= | |
| => setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => bdinfo | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x000000007fffffff | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x000000037fffffff | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffec5000 | |
| reloc off = 0x000000007f6c5000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = f4:84:4c:fb:3e:9f | |
| IP addr = 192.168.0.201 | |
| fdt_blob = 0x00000000fde70d90 | |
| new_fdt = 0x00000000fde70d90 | |
| fdt_size = 0x0000000000014020 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xfffffffe], 0x7fffffff bytes flags: 0 | |
| memory[1] [0x880000000-0xbfffffffe], 0x37fffffff bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xa9bfffff], 0x0b400000 bytes flags: 4 | |
| reserved[1] [0xfce61000-0xfffffffe], 0x0319efff bytes flags: 0 | |
| reserved[2] [0x880000000-0xbffffefff], 0x37ffff000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde70d80 | |
| sp start = 0x00000000fde70d80 | |
| Early malloc usage: 2e08 / 8000 | |
| => | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x000000007fffffff | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x000000037fffffff | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffec5000 | |
| reloc off = 0x000000007f6c5000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = f4:84:4c:fb:3e:9f | |
| IP addr = 192.168.0.201 | |
| fdt_blob = 0x00000000fde70d90 | |
| new_fdt = 0x00000000fde70d90 | |
| fdt_size = 0x0000000000014020 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xfffffffe], 0x7fffffff bytes flags: 0 | |
| memory[1] [0x880000000-0xbfffffffe], 0x37fffffff bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xa9bfffff], 0x0b400000 bytes flags: 4 | |
| reserved[1] [0xfce61000-0xfffffffe], 0x0319efff bytes flags: 0 | |
| reserved[2] [0x880000000-0xbffffefff], 0x37ffff000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde70d80 | |
| sp start = 0x00000000fde70d80 | |
| Early malloc usage: 2e08 / 8000 | |
| => ls mmc 0:1 | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| <DIR> 16384 lost+found | |
| => ls mmc 1:1 | |
| EFI/ | |
| 21649920 Image | |
| 480317 tiboot3.bin | |
| 480317 tiboot3-j721s2-gp-evm.bin | |
| 482906 tiboot3-j721s2-hs-fs-evm.bin | |
| 1078475 tispl.bin | |
| 1329403 u-boot.img | |
| 574 uEnv.txt | |
| 4 ws-calibrate.rules | |
| 8 file(s), 1 dir(s) | |
| => ext4ls mmc 0:2 /lib/firmware | |
| ** Invalid partition 2 ** | |
| Couldn't find partition mmc 0:2 | |
| => ext4ls mmc 1:2 /lib/firmware | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| 2040 LICENCE.ibt_firmware | |
| 2046 LICENCE.iwlwifi_firmware | |
| 478552 bl32.bin | |
| 4295688 bl32.elf | |
| <DIR> 4096 cadence | |
| <DIR> 4096 cnm | |
| <DIR> 4096 intel | |
| 918268 iwlwifi-3160-17.ucode | |
| 2448976 iwlwifi-8000C-34.ucode | |
| 2428004 iwlwifi-8000C-36.ucode | |
| 2440780 iwlwifi-8265-34.ucode | |
| 2436632 iwlwifi-8265-36.ucode | |
| 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| 1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| <SYM> 66 j721s2-c71_0-fw | |
| <SYM> 73 j721s2-c71_0-fw-sec | |
| <SYM> 66 j721s2-c71_1-fw | |
| <SYM> 73 j721s2-c71_1-fw-sec | |
| <SYM> 68 j721s2-main-r5f0_0-fw | |
| <SYM> 75 j721s2-main-r5f0_0-fw-sec | |
| <SYM> 68 j721s2-main-r5f0_1-fw | |
| <SYM> 75 j721s2-main-r5f0_1-fw-sec | |
| <SYM> 68 j721s2-main-r5f1_0-fw | |
| <SYM> 75 j721s2-main-r5f1_0-fw-sec | |
| <SYM> 68 j721s2-main-r5f1_1-fw | |
| <SYM> 75 j721s2-main-r5f1_1-fw-sec | |
| <SYM> 68 j721s2-mcu-r5f0_1-fw | |
| <SYM> 75 j721s2-mcu-r5f0_1-fw-sec | |
| 4728 regulatory.db | |
| 1182 regulatory.db.p7s | |
| 151552 rgx.fw.36.53.104.796 | |
| 383136 rgx.sh.36.53.104.796 | |
| 28 tee-header_v2.bin | |
| 0 tee-pageable_v2.bin | |
| 478552 tee-pager_v2.bin | |
| 478552 tee-raw.bin | |
| 478580 tee.bin | |
| 4295688 tee.elf | |
| <DIR> 4096 ti-connectivity | |
| <DIR> 4096 ti-ipc | |
| <SYM> 39 wave521c_codec_fw.bin | |
| => mmc rescan; echo $? | |
| 0 | |
| => fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 | |
| 4 bytes written in 5 ms (0 Bytes/s) | |
| => boot | |
| ## Checking Image at 82000000 ... | |
| Unknown image format! | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008ffe6000, end 000000008ffff9a5 ... OK | |
| Working FDT set to 8ffe6000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc1-next-20231116-00004-g3e504d2927ed (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J721S2 EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a6000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c71-dma-memory@a6000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a6100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c71-memory@a6100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a7000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c71-dma-memory@a7000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a7100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c71-memory@a7100000 | |
| [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a9bfffff (28672 KiB) nomap non-reusable ipc-memories@a8000000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x0000000bffffefff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a9bfffff] | |
| [ 0.000000] node 0: [mem 0x00000000a9c00000-0x00000000ffffefff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x0000000bffffefff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000bffffefff] | |
| [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges | |
| [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fde00000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s43304 r8192 d30424 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721s2-evm/autofs/9f4ea228818d776413fb59498a628176,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| [ 0.000000] sysrq: sysrq always enabled. | |
| [ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4128766 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 2. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000f9e00000-0x00000000fde00000] (64MB) | |
| [ 0.000000] Memory: 16151976K/16777208K available (12608K kernel code, 1252K rwdata, 4652K rodata, 2752K init, 500K bss, 592464K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880040000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008498] Console: colour dummy device 80x25 | |
| [ 0.013064] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.023737] pid_max: default: 32768 minimum: 301 | |
| [ 0.028496] LSM: initializing lsm=capability,integrity | |
| [ 0.033832] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.041610] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear) | |
| [ 0.050753] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.058018] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.065886] rcu: Hierarchical SRCU implementation. | |
| [ 0.070786] rcu: Max phase no-delay instances is 1000. | |
| [ 0.076310] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.082508] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091918] EFI services will not be available. | |
| [ 0.096662] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| [ 0.109735] Detected PIPT I-cache on CPU1 | |
| [ 0.109783] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.109797] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000 | |
| [ 0.109834] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.109894] smp: Brought up 1 node, 2 CPUs | |
| [ 0.139245] SMP: Total of 2 processors activated. | |
| [ 0.144050] CPU features: detected: 32-bit EL0 Support | |
| [ 0.149304] CPU features: detected: CRC32 instructions | |
| [ 0.280064] CPU: All CPU(s) started at EL2 | |
| [ 0.284266] alternatives: applying system-wide alternatives | |
| [ 0.291031] devtmpfs: initialized | |
| [ 0.301558] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.311535] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
| [ 0.319010] pinctrl core: initialized pinctrl subsystem | |
| [ 0.324586] DMI not present or invalid. | |
| [ 0.328868] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.335643] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.343323] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.351717] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.359941] audit: initializing netlink subsys (disabled) | |
| [ 0.365560] audit: type=2000 audit(0.172:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.365793] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.373484] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.379643] cpuidle: using governor menu | |
| [ 0.390405] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.397368] ASID allocator initialised with 65536 entries | |
| [ 0.412884] Modules: 27280 pages in range for non-PLT usage | |
| [ 0.412893] Modules: 518800 pages in range for PLT usage | |
| [ 0.419078] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.431444] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.437846] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.444781] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.451182] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.458116] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.464518] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.471452] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.478893] k3-chipinfo 43000014.chipid: Family:J721S2 rev:SR1.0 JTAGID[0x0bb7502f] Detected | |
| [ 0.487916] iommu: Default domain type: Translated | |
| [ 0.492819] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.499286] SCSI subsystem initialized | |
| [ 0.503320] usbcore: registered new interface driver usbfs | |
| [ 0.508941] usbcore: registered new interface driver hub | |
| [ 0.514381] usbcore: registered new device driver usb | |
| [ 0.519854] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.524926] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.534264] PTP clock support registered | |
| [ 0.538284] EDAC MC: Ver: 3.0.0 | |
| [ 0.541747] scmi_core: SCMI protocol bus registered | |
| [ 0.546933] FPGA manager framework | |
| [ 0.550443] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.557086] vgaarb: loaded | |
| [ 0.560034] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.566407] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.570430] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.580666] NET: Registered PF_INET protocol family | |
| [ 0.586003] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.598942] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear) | |
| [ 0.607944] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.615886] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear) | |
| [ 0.624568] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.633165] TCP: Hash tables configured (established 131072 bind 65536) | |
| [ 0.640088] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear) | |
| [ 0.647197] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear) | |
| [ 0.654849] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.660989] RPC: Registered named UNIX socket transport module. | |
| [ 0.667051] RPC: Registered udp transport module. | |
| [ 0.671856] RPC: Registered tcp transport module. | |
| [ 0.676660] RPC: Registered tcp-with-tls transport module. | |
| [ 0.682263] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.688853] PCI: CLS 0 bytes, default 64 | |
| [ 0.693547] Initialise system trusted keyrings | |
| [ 0.698212] workingset: timestamp_bits=46 max_order=22 bucket_order=0 | |
| [ 0.704983] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 0.711100] NFS: Registering the id_resolver key type | |
| [ 0.716279] Key type id_resolver registered | |
| [ 0.720554] Key type id_legacy registered | |
| [ 0.724657] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 0.731506] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 0.739158] 9p: Installing v9fs 9p2000 file system support | |
| [ 0.765923] Key type asymmetric registered | |
| [ 0.770108] Asymmetric key parser 'x509' registered | |
| [ 0.775117] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 0.782684] io scheduler mq-deadline registered | |
| [ 0.787311] io scheduler kyber registered | |
| [ 0.791426] io scheduler bfq registered | |
| [ 0.796994] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 0.802983] pinctrl-single 4301c038.pinctrl: 11 pins, size 44 | |
| [ 0.809011] pinctrl-single 4301c068.pinctrl: 72 pins, size 288 | |
| [ 0.815237] pinctrl-single 4301c190.pinctrl: 1 pins, size 4 | |
| [ 0.821081] pinctrl-single 11c000.pinctrl: 72 pins, size 288 | |
| [ 0.827102] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 0.832864] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 0.842809] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 0.850516] STM32 USART driver initialized | |
| [ 0.857667] loop: module loaded | |
| [ 0.861401] megasas: 07.727.03.00-rc1 | |
| [ 0.867095] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 0.872717] thunder_xcv, ver 1.0 | |
| [ 0.876017] thunder_bgx, ver 1.0 | |
| [ 0.879329] nicpf, ver 1.0 | |
| [ 0.882343] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 0.889724] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 0.895171] hclge is initializing | |
| [ 0.898571] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 0.903555] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 0.909436] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 0.914508] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 0.920567] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 0.926081] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 0.931781] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 0.938184] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 0.944308] sky2: driver version 1.30 | |
| [ 0.948544] VFIO - User Level meta-driver version: 0.3 | |
| [ 0.954485] usbcore: registered new interface driver usb-storage | |
| [ 0.961124] i2c_dev: i2c /dev entries driver | |
| [ 0.966628] sdhci: Secure Digital Host Controller Interface driver | |
| [ 0.972954] sdhci: Copyright(c) Pierre Ossman | |
| [ 0.977710] Synopsys Designware Multimedia Card Interface Driver | |
| [ 0.984128] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 0.990498] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 0.996808] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.003865] usbcore: registered new interface driver usbhid | |
| [ 1.009565] usbhid: USB HID core driver | |
| [ 1.014412] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 1.023114] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 1.027673] optee: revision 3.20 (8e74d476) | |
| [ 1.044142] optee: dynamic shared memory is enabled | |
| [ 1.053873] random: crng init done | |
| [ 1.057420] optee: initialized driver | |
| [ 1.062330] NET: Registered PF_PACKET protocol family | |
| [ 1.067569] 9pnet: Installing 9P2000 support | |
| [ 1.071974] Key type dns_resolver registered | |
| [ 1.079780] registered taskstats version 1 | |
| [ 1.084048] Loading compiled-in X.509 certificates | |
| [ 1.094523] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.145769] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.152210] pca953x 1-0021: supply vcc not found, using dummy regulator | |
| [ 1.159059] pca953x 1-0021: using no AI | |
| [ 1.184475] pca953x 1-0020: supply vcc not found, using dummy regulator | |
| [ 1.191290] pca953x 1-0020: using no AI | |
| [ 1.195879] pca953x 1-0022: supply vcc not found, using dummy regulator | |
| [ 1.202691] pca953x 1-0022: using AI | |
| [ 1.207005] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz | |
| [ 1.212759] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 125 domain created | |
| [ 1.221306] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 148 domain created | |
| [ 1.230655] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 227 domain created | |
| [ 1.239321] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 265 created | |
| [ 1.248540] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:272 | |
| [ 1.258437] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.265197] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.274574] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:259 | |
| [ 1.284741] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.291502] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.299716] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 186, base_baud = 6000000) is a 8250 | |
| [ 1.309416] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 187, base_baud = 3000000) is a 8250 | |
| [ 1.318327] printk: legacy console [ttyS2] enabled | |
| [ 1.318327] printk: legacy console [ttyS2] enabled | |
| [ 1.328002] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.328002] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.342002] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.388039] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.398100] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.406381] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.419240] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.426448] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.433967] mmc0: CQHCI version 5.10 | |
| [ 1.474679] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 1.484833] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8) | |
| [ 1.495206] ti-udma 31150000.dma-controller: Channels: 60 (tchan: 30, rchan: 30, gp-rflow: 16) | |
| [ 1.507752] spi-nor spi0.0: s28hs512t (65536 Kbytes) | |
| [ 1.515552] spi-nor spi1.0: mt25qu512a (65536 Kbytes) | |
| [ 1.522214] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode | |
| [ 1.562303] mmc0: Command Queue Engine enabled | |
| [ 1.566753] mmc0: new HS400 MMC card at address 0001 | |
| [ 1.571719] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.572046] mmcblk0: mmc0:0001 S0J56X 14.8 GiB | |
| [ 1.581854] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.586357] mmcblk0: p1 | |
| [ 1.592096] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.594863] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.607478] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.612855] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB | |
| [ 1.619444] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.624864] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (240:0) | |
| [ 1.637126] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 1.645387] mmc1: CQHCI version 5.10 | |
| [ 1.686643] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 1.703558] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 1.713044] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 1.766152] mmc1: new ultra high speed DDR50 SDHC card at address aaaa | |
| [ 1.773093] mmcblk1: mmc1:aaaa SC16G 14.8 GiB | |
| [ 1.781712] mmcblk1: p1 p2 p3 | |
| [ 5.825028] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 5.856037] Sending DHCP requests ., OK | |
| [ 5.875871] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.201 | |
| [ 5.883606] IP-Config: Complete: | |
| [ 5.886823] device=eth0, hwaddr=f4:84:4c:fb:3e:9f, ipaddr=192.168.0.201, mask=255.255.255.0, gw=192.168.0.1 | |
| [ 5.896978] host=192.168.0.201, domain=ti.com, nis-domain=(none) | |
| [ 5.903402] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= | |
| [ 5.903405] nameserver0=192.0.2.2, nameserver1=192.0.2.3 | |
| [ 5.916120] clk: Disabling unused clocks | |
| [ 5.928990] ALSA device list: | |
| [ 5.931950] No soundcards found. | |
| [ 5.959720] VFS: Mounted root (nfs filesystem) on device 0:21. | |
| [ 5.965773] devtmpfs: mounted | |
| [ 5.969751] Freeing unused kernel memory: 2752K | |
| [ 5.980119] Run /sbin/init as init process | |
| [ 6.095236] systemd[1]: System time before build time, advancing clock. | |
| [ 6.124241] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 6.155685] systemd[1]: Detected architecture arm64. | |
| Welcome to [1mArago 2023.04[0m! | |
| [ 6.208962] systemd[1]: Hostname set to <j721s2-evm>. | |
| [ 6.216828] systemd[1]: Initializing machine ID from random generator. | |
| [ 6.319544] systemd-sysv-generator[86]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.344712] systemd-sysv-generator[86]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.370273] systemd-sysv-generator[86]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.398655] systemd[77]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. | |
| [ 6.573621] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.582527] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.611421] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.662447] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 6.724594] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 6.772842] systemd[1]: Created slice Slice /system/getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. | |
| [ 6.797522] systemd[1]: Created slice Slice /system/modprobe. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. | |
| [ 6.821444] systemd[1]: Created slice Slice /system/serial-getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. | |
| [ 6.845140] systemd[1]: Created slice User and Session Slice. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
| [ 6.868284] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m. | |
| [ 6.892200] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m. | |
| [ 6.916269] systemd[1]: Reached target Path Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. | |
| [ 6.936105] systemd[1]: Reached target Remote File Systems. | |
| [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
| [ 6.956097] systemd[1]: Reached target Slice Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. | |
| [ 6.976102] systemd[1]: Reached target Swaps. | |
| [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. | |
| [ 7.015204] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
| [ 7.040241] systemd[1]: Reached target RPC Port Mapper. | |
| [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
| [ 7.063794] systemd[1]: Listening on Process Core Dump Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m. | |
| [ 7.084311] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
| [ 7.108891] systemd[1]: Listening on Journal Audit Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. | |
| [ 7.132808] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
| [ 7.156449] systemd[1]: Listening on Journal Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
| [ 7.177012] systemd[1]: Listening on Network Service Netlink Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
| [ 7.201444] systemd[1]: Listening on udev Control Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
| [ 7.224359] systemd[1]: Listening on udev Kernel Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
| [ 7.244661] systemd[1]: Listening on User Database Manager Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. | |
| [ 7.288360] systemd[1]: Mounting Huge Pages File System... | |
| Mounting [0;1;39mHuge Pages File System[0m... | |
| [ 7.306953] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
| [ 7.331019] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting [0;1;39mKernel Debug File System[0m... | |
| [ 7.356457] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 7.400343] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting [0;1;39mTemporary Directory /tmp[0m... | |
| [ 7.420406] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed/modules.devname). | |
| [ 7.441516] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting [0;1;39mLoad Kernel Module configfs[0m... | |
| [ 7.480488] systemd[1]: Starting Load Kernel Module drm... | |
| Starting [0;1;39mLoad Kernel Module drm[0m... | |
| [ 7.502875] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting [0;1;39mLoad Kernel Module fuse[0m... | |
| [ 7.544569] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting [0;1;39mStart psplash boot splash screen[0m... | |
| [ 7.572417] systemd[1]: Starting RPC Bind... | |
| Starting [0;1;39mRPC Bind[0m... | |
| [ 7.588721] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 7.616791] systemd[1]: Starting Journal Service... | |
| Starting [0;1;39mJournal Service[0m... | |
| [ 7.637728] systemd[1]: Starting Load Kernel Modules... | |
| Starting [0;1;39mLoad Kernel Modules[0m... | |
| [ 7.662275] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting [0;1;39mGenerate network ts from Kernel command line[0m... | |
| [ 7.693525] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
| [ 7.723452] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting [0;1;39mColdplug All udev Devices[0m... | |
| [ 7.750104] systemd[1]: Started RPC Bind. | |
| [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
| [ 7.768615] systemd[1]: Started Journal Service. | |
| [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m. | |
| See 'systemctl status psplash-start.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. | |
| Mounting [0;1;39mKernel Configuration File System[0m... | |
| Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
| [ 8.089154] systemd-journald[100]: Received client request to flush runtime journal. | |
| Starting [0;1;39mApply Kernel Variables[0m... | |
| Starting [0;1;39mCreate System Users[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. | |
| Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. | |
| Mounting [0;1;39m/media/ram[0m... | |
| Mounting [0;1;39m/var/volatile[0m... | |
| [ 8.366759] audit: type=1334 audit(1651167747.268:2): prog-id=5 op=LOAD | |
| [ 8.373864] audit: type=1334 audit(1651167747.276:3): prog-id=6 op=LOAD | |
| Starting [0;1;39mRule-based Managefor Device Events and Files[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
| Starting [0;1;39mLoad/Save Random Seed[0m... | |
| [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
| Starting [0;1;39mRebuild Dynamic Linker Cache[0m... | |
| Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
| [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. | |
| Starting [0;1;39mRebuild Journal Catalog[0m... | |
| Starting [0;1;39mNetwork Time Synchronization[0m... | |
| Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Journal Catalog[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Dynamic Linker Cache[0m. | |
| Starting [0;1;39mRun pending postinsts[0m... | |
| Starting [0;1;39mUpdate is Completed[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUpdate is Completed[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m. | |
| Mounting [0;1;39m/run/media/rootfs-mmcblk0p1[0m... | |
| [ 12.402637] EXT2-fs (mmcblk0p1): warning: mounting unchecked fs, running e2fsck is recommended | |
| [ 12.413931] ext2 filesystem being mounted at /run/media/rootfs-mmcblk0p1 supports timestamps until 2038-01-19 (0x7fffffff) | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/rootfs-mmcblk0p1[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m. | |
| Mounting [0;1;39m/run/media/root-mmcblk1p2[0m... | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m. | |
| [ 12.705007] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 12.710646] EXT4-fs (mmcblk1p2): mounted filesystem 6e2d572f-7ead-403a-ad4a-05247fa69381 r/w with ordered data mode. Quota mode: none. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m. | |
| Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m... | |
| Mounting [0;1;39m/run/media/mmcblk1p3[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRun pending postinsts[0m. | |
| [ 12.939405] EXT4-fs (mmcblk1p3): recovery complete | |
| [ 12.944312] EXT4-fs (mmcblk1p3): mounted filesystem d3b6fdb0-0f58-4cd4-a2de-17f6290c72ba r/w with ordered data mode. Quota mode: none. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Initializatio[ 12.960446] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| n[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
| Starting [0;1;39mDocker Socket for the API[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m. | |
| Starting [0;1;39mWeston socket[0m... | |
| Starting [0;1;39mD-Bus System Message Bus[0m... | |
| Starting [0;1;39mReboot and dump vmcore via kexec[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
| [[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m. | |
| [[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m. | |
| Starting [0;1;39mPrint notice about GPLv3 packages[0m... | |
| Starting [0;1;39mIPv6 Packet Filtering Framework[0m... | |
| Starting [0;1;39mIPv4 Packet Filtering Framework[0m... | |
| [[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m. | |
| Starting [0;1;39mLighttpd Daemon[0m... | |
| [[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m. | |
| [ 13.499856] audit: type=1334 audit(1651167752.400:4): prog-id=7 op=LOAD | |
| [ 13.507293] audit: type=1334 audit(1651167752.408:5): prog-id=8 op=LOAD | |
| Starting [0;1;39mUser Login Management[0m... | |
| [[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m. | |
| Starting [0;1;39mTelnet Server[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. | |
| Starting [0;1;39mNetwork Configuration[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m. | |
| Starting [0;1;39mNetwork Name Resolution[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
| Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
| Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m... | |
| Starting [0;1;39mcontainerd container runtime[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m. | |
| Starting [0;1;39mPermit User Sessions[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m. | |
| See 'systemctl status bt-enable.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. | |
| [[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
| [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
| Starting [0;1;39mSynchronize System and HW clocks[0m... | |
| Starting [0;1;39mWeston, a Waylandositor, as a system service[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 14.672170] audit: type=1334 audit(1651167753.576:6): prog-id=9 op=LOAD | |
| [ 14.686362] audit: type=1334 audit(1651167753.584:7): prog-id=10 op=LOAD | |
| Starting [0;1;39mUser Database Manager[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m. | |
| Starting [0;1;39mUser Runtime Directory /run/user/1000[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m. | |
| Starting [0;1;39mUser Manager for UID 1000[0m... | |
| [ 15.153348] audit: type=1006 audit(1651167754.056:8): pid=606 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 15.167490] audit: type=1300 audit(1651167754.056:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffece3a588 a2=4 a3=ffffa5cdc020 items=0 ppid=1 pid=606 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.194382] audit: type=1327 audit(1651167754.056:8): proctitle="(systemd)" | |
| [[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m. | |
| [ 15.521232] audit: type=1006 audit(1651167754.424:9): pid=595 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [ 15.534024] audit: type=1300 audit(1651167754.424:9): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffece3a588 a2=4 a3=ffffa5cdc020 items=0 ppid=1 pid=595 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=tty7 ses=2 comm="(weston)" exe="/lib/systemd/systemd" key=(null) | |
| [ 15.560343] audit: type=1327 audit(1651167754.424:9): proctitle="(weston)" | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m. | |
| See 'systemctl status weston.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. | |
| Starting [0;1;39mRecord Runlevel Change in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j721s2-evm - | |
| Arago 2023.04 j721s2-evm - | |
| j721s2-evm login: root | |
| 7[r[999;999H[6nroot@j721s2-evm:~# uname -a | |
| Linux j721s2-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721s2-evm:~# cat /proc/cmdline | |
| console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721s2-evm/autofs/9f4ea228818d776413fb59498a628176,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| root@j721s2-evm:~# uname -a | |
| Linux j721s2-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j721s2-evm:~# cat /proc/mtd | |
| dev: size erasesize name | |
| mtd0: 04000000 00040000 "47040000.spi.0" | |
| mtd1: 04000000 00001000 "47050000.spi.0" | |
| root@j721s2-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/ | |
| /pnp /etc/resolv.conf && systemctl restart systemd-resolved | |
| root@j721s2-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc | |
| total 26884 | |
| -rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware | |
| -rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 bl32.bin | |
| -rw-r--r-- 1 root root 4105416 Mar 9 2018 bl32.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cnm | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 intel | |
| -rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode | |
| -rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode | |
| -rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode | |
| -rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode | |
| -rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode | |
| -rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| -rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| -rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j721s2-c71_0-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_c7x_1_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j721s2-c71_0-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_c7x_1_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j721s2-c71_1-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_c7x_2_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j721s2-c71_1-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_c7x_2_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j721s2-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu2_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j721s2-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu2_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j721s2-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu2_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j721s2-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu2_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j721s2-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu3_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j721s2-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu3_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j721s2-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu3_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j721s2-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu3_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j721s2-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu1_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j721s2-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721s2/ipc_echo_test_mcu1_1_release_strip.xer5f.signed | |
| -rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db | |
| -rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s | |
| -rw-r--r-- 1 root root 151552 Mar 9 2018 rgx.fw.36.53.104.796 | |
| -rw-r--r-- 1 root root 383136 Mar 9 2018 rgx.sh.36.53.104.796 | |
| -rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin | |
| -rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 tee-pager_v2.bin | |
| -rw-r--r-- 1 root root 432276 Mar 9 2018 tee.bin | |
| -rw-r--r-- 1 root root 4105416 Mar 9 2018 tee.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc | |
| lrwxrwxrwx 1 root root 39 Mar 9 2018 wave521c_codec_fw.bin -> /lib/firmware/cnm/wave521c_codec_fw.bin | |
| ls: cannot access '/lib/firmware/ipc': No such file or directory | |
| root@j721s2-evm:~# cat /proc/diskstats | |
| 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 31 0 mtdblock0 52 0 2088 149 0 0 0 0 0 116 149 0 0 0 0 0 0 | |
| 31 1 mtdblock1 52 0 2088 170 0 0 0 0 0 116 170 0 0 0 0 0 0 | |
| 179 0 mmcblk0 273 0 18250 114 2 0 16 2 0 340 116 0 0 0 0 0 0 | |
| 179 1 mmcblk0p1 220 0 16962 97 2 0 16 2 0 280 100 0 0 0 0 0 0 | |
| 179 32 mmcblk0boot0 68 0 1344 14 0 0 0 0 0 32 14 0 0 0 0 0 0 | |
| 179 64 mmcblk0boot1 34 0 672 10 0 0 0 0 0 16 10 0 0 0 0 0 0 | |
| 179 96 mmcblk1 685 34 45535 2617 2 0 16 3 0 1200 2620 0 0 0 0 0 0 | |
| 179 97 mmcblk1p1 236 0 14593 919 0 0 0 0 0 836 919 0 0 0 0 0 0 | |
| 179 98 mmcblk1p2 205 32 15092 841 1 0 8 2 0 724 843 0 0 0 0 0 0 | |
| 179 99 mmcblk1p3 206 2 14650 810 1 0 8 1 0 768 811 0 0 0 0 0 0 | |
| root@j721s2-evm:~# cat /proc/interrupts | |
| CPU0 CPU1 | |
| 11: 4148 4069 GICv3 30 Level arch_timer | |
| 14: 0 0 GICv3 23 Level arm-pmu | |
| 15: 1102 0 GICv3 69 Level 32c00000.mailbox thr_011 | |
| 36: 223 0 GICv3 928 Level 42120000.i2c | |
| 37: 41 0 GICv3 232 Level 2000000.i2c | |
| 38: 52874 0 MSI-INTA 17825888 Level 46000000.ethernet-tx0 | |
| 40: 85099 0 MSI-INTA 17825890 Level 46000000.ethernet | |
| 58: 2095 0 MSI-INTA 16974702 Level 31150000.dma-controller chan0 | |
| 59: 2091 0 MSI-INTA 16974703 Level 31150000.dma-controller chan1 | |
| 186: 0 0 GICv3 878 Level 40a00000.serial | |
| 187: 691 0 GICv3 280 Level 2880000.serial | |
| 188: 2 0 GICv3 872 Level 47040000.spi | |
| 189: 0 0 GICv3 873 Level 47050000.spi | |
| 191: 512 0 GICv3 35 Level mmc0 | |
| 236: 0 0 GPIO 39 Edge -davinci_gpio tps6594-0-0x48, tps6594-0-0x4c, tps6594-2-0x58 | |
| 705: 1469 0 GICv3 36 Level mmc1 | |
| IPI0: 2395 8372 Rescheduling interrupts | |
| IPI1: 4215 12673 Function call interrupts | |
| IPI2: 0 0 CPU stop interrupts | |
| IPI3: 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 Timer broadcast interrupts | |
| IPI5: 0 0 IRQ work interrupts | |
| Err: 0 | |
| root@j721s2-evm:~# cat /proc/softirqs | |
| CPU0 CPU1 | |
| HI: 0 0 | |
| TIMER: 1389 1646 | |
| NET_TX: 62 6 | |
| NET_RX: 76334 15 | |
| BLOCK: 376 0 | |
| IRQ_POLL: 0 0 | |
| TASKLET: 8440 2 | |
| SCHED: 1988 2040 | |
| HRTIMER: 0 0 | |
| RCU: 5500 7598 | |
| root@j721s2-evm:~# ls -lR /run/media/mmcblk0p1 | |
| ls: cannot access '/run/media/mmcblk0p1': No such file or directory | |
| root@j721s2-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $? | |
| 1 | |
| root@j721s2-evm:~# opkg list-installed | grep ti-test; echo $? | |
| ti-test - 1.0-r0.121 | |
| ti-test-extras - 1.0-r0.121 | |
| 0 | |
| root@j721s2-evm:~# depmod -a | |
| depmod: ERROR: could not open directory /lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed: No such file or directory | |
| depmod: FATAL: could not search modules: No such file or directory | |
| root@j721s2-evm:~# lsmod | |
| Module Size Used by | |
| root@j721s2-evm:~# echo 'hello world' | |
| hello world | |
| root@j721s2-evm:~# |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| ti_i2c_eeprom_am6_get: Ignoring record id 255 | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| SPL initial stack usage: 13424 bytes | |
| Trying to boot from UART | |
| C GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1000031 bytes | |
| Loading Environment from nowhere... OK | |
| init_env from device 7 not supported! | |
| Starting ATF on ARM64 core... | |
| NOTICE: BL31: v2.9(release):v2.9.0-614-gd7a7135d32-dirty | |
| NOTICE: BL31: Built : 09:34:15, Aug 24 2023 | |
| I/TC: | |
| I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64 | |
| I/TC: WARNING: This OP-TEE configuration might be insecure! | |
| I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html | |
| I/TC: Primary CPU initializing | |
| I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| I/TC: HUK Initialized | |
| I/TC: Activated SA2UL device | |
| I/TC: Fixing SA2UL firewall owner for GP device | |
| I/TC: Enabled firewalls for SA2UL TRNG device | |
| I/TC: SA2UL TRNG initialized | |
| I/TC: SA2UL Drivers initialized | |
| I/TC: Primary CPU switching to normal world boot | |
| U-Boot SPL 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SYSFW ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| Trying to boot from UART | |
| Certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted | |
| Loaded 1326363 bytes | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| SoC: J784S4 SR1.0 GP | |
| Model: Texas Instruments J784S4 EVM | |
| Board: J784S4X-EVM rev E2 | |
| DRAM: 32 GiB | |
| idle-statesCore: 91 devices, 32 uclasses, devicetree: separate | |
| Flash: 0 Bytes | |
| MMC: mmc@4f80000: 0, mmc@4fb0000: 1 | |
| Loading Environment from nowhere... OK | |
| In: serial@2880000 | |
| Out: serial@2880000 | |
| Err: serial@2880000 | |
| am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000 | |
| Net: eth0: ethernet@46000000port@1 | |
| Hit any key to stop autoboot: 2 0 | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ' | |
| => setenv bootcmd '' | |
| => setenv autoload 'no' | |
| => setenv serverip '192.168.0.1' | |
| => setenv _initramfs - | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02880000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ospi_nand=setenv bootargs console=${console} ${optargs} ubi.mtd=${ospi_nand_bootpart} root=${ospi_nand_bootvolume} rootfstype=ubifs | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j784s4 | |
| board_name=j784s4 | |
| board_rev=E2 | |
| board_serial=0082 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j784s4-evm.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| do_main_cpsw0_qsgmii_phyinit=1 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethaddr=68:e7:4a:08:40:77 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde71450 | |
| fdtoverlay_addr_r=0x89000000 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = am69-sk; then setenv name_fdt ti/k3-am69-sk.dtb; fi; if test $board_name = j784s4; then setenv name_fdt ti/k3-j784s4-evm.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ospi_nand=ubifsload ${fdtaddr} ${bootdir}/dtb/${fdtfile}; | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_ospi_nand=ubifsload ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ospi_nand=ubifsload ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ospi_nand=fdt address ${fdtaddr} fdt resize 0x100000; for overlay in $name_overlays; do; ubifsload ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ospi_nand=run args_all args_ospi_nand ospi_nand_ubi_init | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = j784s4; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| mtdids=nor0=47040000.spi.0,nand0=spi-nand0 | |
| mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) | |
| name_fit=fitImage | |
| name_kern=Image | |
| ospi_nand_bootpart=ospi_nand.rootfs | |
| ospi_nand_bootvolume=ubi0:rootfs | |
| ospi_nand_ubi_init=ubi part ${ospi_nand_bootpart}; ubifsmount ${ospi_nand_bootvolume}; | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j784s4-mcu-r5f0_1-fw 2 /lib/firmware/j784s4-main-r5f0_0-fw 3 /lib/firmware/j784s4-main-r5f0_1-fw 4 /lib/firmware/j784s4-main-r5f1_0-fw 5 /lib/firmware/j784s4-main-r5f1_1-fw 6 /lib/firmware/j784s4-main-r5f2_0-fw 7 /lib/firmware/j784s4-main-r5f2_1-fw 8 /lib/firmware/j784s4-c71_0-fw 9 /lib/firmware/j784s4-c71_1-fw 10 /lib/firmware/j784s4-c71_2-fw 11 /lib/firmware/j784s4-c71_3-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000082 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| splashfile=ti.gz | |
| splashimage=0x82000000 | |
| splashpos=m,m | |
| splashsource=mmc | |
| stderr=serial@2880000 | |
| stdin=serial@2880000 | |
| stdout=serial@2880000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 12050/262139 bytes | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled | |
| => setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp ' | |
| => setenv serverip '192.168.0.1' | |
| => setenv autoload 'no' | |
| => dhcp | |
| k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:328 | |
| k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| BOOTP broadcast 1 | |
| BOOTP broadcast 2 | |
| BOOTP broadcast 3 | |
| DHCP client bound to address 192.168.0.142 (1003 ms) | |
| => setenv dorprocboot '1' | |
| => run boot_rprocs | |
| k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 1 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 2 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 34 ms (2 MiB/s) | |
| Load Remote Processor 3 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 4 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 5 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 6 with data@addr=0x82000000 72188 bytes: Success! | |
| 72188 bytes read in 33 ms (2.1 MiB/s) | |
| Load Remote Processor 7 with data@addr=0x82000000 72188 bytes: Success! | |
| 10489056 bytes read in 40 ms (250.1 MiB/s) | |
| Load Remote Processor 8 with data@addr=0x82000000 10489056 bytes: Success! | |
| 10489056 bytes read in 41 ms (244 MiB/s) | |
| Load Remote Processor 9 with data@addr=0x82000000 10489056 bytes: Success! | |
| 10489056 bytes read in 40 ms (250.1 MiB/s) | |
| Load Remote Processor 10 with data@addr=0x82000000 10489056 bytes: Success! | |
| 10489056 bytes read in 40 ms (250.1 MiB/s) | |
| Load Remote Processor 11 with data@addr=0x82000000 10489056 bytes: Success! | |
| => printenv | |
| _initramfs=- | |
| addr_fit=0x90000000 | |
| arch=arm | |
| args_all=setenv optargs ${optargs} earlycon=ns16550a,mmio32,0x02880000 ${mtdparts} | |
| args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype} | |
| args_ospi_nand=setenv bootargs console=${console} ${optargs} ubi.mtd=${ospi_nand_bootpart} root=${ospi_nand_bootvolume} rootfstype=ubifs | |
| args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1 | |
| autoload=no | |
| baudrate=115200 | |
| board=j784s4 | |
| board_name=j784s4 | |
| board_rev=E2 | |
| board_serial=0082 | |
| board_software_revision=01 | |
| boot=mmc | |
| boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr} | |
| boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi | |
| boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi | |
| boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf} | |
| boot_fdt=try | |
| boot_fit=0 | |
| boot_net_usb_start=usb start | |
| boot_prefixes=/ /boot/ | |
| boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi; | |
| boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done | |
| boot_script_dhcp=boot.scr.uimg | |
| boot_scripts=boot.scr.uimg boot.scr | |
| boot_syslinux_conf=extlinux/extlinux.conf | |
| boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| bootcmd= | |
| bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci; | |
| bootcmd_mmc0=devnum=0; run mmc_boot | |
| bootcmd_mmc1=devnum=1; run mmc_boot | |
| bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi | |
| bootcmd_ti_mmc=run findfdt; run init_${boot}; run main_cpsw0_qsgmii_phyinit; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi; | |
| bootcmd_usb0=devnum=0; run usb_boot | |
| bootdelay=2 | |
| bootdir=/boot | |
| bootenvfile=uEnv.txt | |
| bootm_size=0x10000000 | |
| bootpart=1:2 | |
| bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr} | |
| console=ttyS2,115200n8 | |
| cpu=armv8 | |
| default_device_tree=ti/k3-j784s4-evm.dtb | |
| dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1 | |
| dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1 | |
| dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7 | |
| dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000 | |
| dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7 | |
| dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000 | |
| distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done | |
| dnsip=192.0.2.2 | |
| do_main_cpsw0_qsgmii_phyinit=1 | |
| dorprocboot=1 | |
| dtboaddr=0x89000000 | |
| efi_dtb_prefixes=/ /dtb/ /dtb/current/ | |
| envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi; | |
| ethact=ethernet@46000000port@1 | |
| ethaddr=68:e7:4a:08:40:77 | |
| fdt_addr_r=0x88000000 | |
| fdtaddr=0x88000000 | |
| fdtcontroladdr=fde71450 | |
| fdtoverlay_addr_r=0x89000000 | |
| fileaddr=82000000 | |
| filesize=a00ce0 | |
| findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = am69-sk; then setenv name_fdt ti/k3-am69-sk.dtb; fi; if test $board_name = j784s4; then setenv name_fdt ti/k3-j784s4-evm.dtb; fi; setenv fdtfile ${name_fdt} | |
| finduuid=part uuid ${boot} ${bootpart} uuid | |
| gatewayip=192.168.0.1 | |
| get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt} | |
| get_fdt_ospi_nand=ubifsload ${fdtaddr} ${bootdir}/dtb/${fdtfile}; | |
| get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile} | |
| get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile} | |
| get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_ospi_nand=ubifsload ${addr_fit} ${bootdir}/${name_fit} | |
| get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done; | |
| get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ospi_nand=ubifsload ${loadaddr} ${bootdir}/${name_kern} | |
| get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern} | |
| get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ospi_nand=fdt address ${fdtaddr} fdt resize 0x100000; for overlay in $name_overlays; do; ubifsload ${dtboaddr} ${bootdir}/dtb/${overlay} && fdt apply ${dtboaddr}; done; | |
| get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done; | |
| importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize} | |
| init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16 | |
| init_mmc=run args_all args_mmc | |
| init_ospi_nand=run args_all args_ospi_nand ospi_nand_ubi_init | |
| init_ufs=ufs init; scsi scan; run args_ufs | |
| ipaddr=192.168.0.142 | |
| kernel_addr_r=0x82000000 | |
| load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile} | |
| loadaddr=0x82000000 | |
| loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile} | |
| loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr | |
| loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile} | |
| loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile} | |
| main_cpsw0_qsgmii_phyinit=if test $board_name = j784s4; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi; | |
| mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi | |
| mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi; | |
| mmcdev=1 | |
| mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi; | |
| mmcrootfstype=ext4 rootwait | |
| mtdids=nor0=47040000.spi.0,nand0=spi-nand0 | |
| mtdparts=mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),256k(ospi.env),256k(ospi.env.backup),57088k@8m(ospi.rootfs),256k(ospi.phypattern);spi-nand0:512k(ospi_nand.tiboot3),2m(ospi_nand.tispl),4m(ospi_nand.u-boot),256k(ospi_nand.env),256k(ospi_nand.env.backup),98048k@32m(ospi_nand.rootfs),256k@130816k(ospi_nand.phypattern) | |
| name_fit=fitImage | |
| name_kern=Image | |
| netmask=255.255.255.0 | |
| ospi_nand_bootpart=ospi_nand.rootfs | |
| ospi_nand_bootvolume=ubi0:rootfs | |
| ospi_nand_ubi_init=ubi part ${ospi_nand_bootpart}; ubifsmount ${ospi_nand_bootvolume}; | |
| partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs} | |
| pxefile_addr_r=0x80100000 | |
| ramdisk_addr_r=0x88080000 | |
| rd_spec=- | |
| rdaddr=0x88080000 | |
| rproc_fw_binaries= 1 /lib/firmware/j784s4-mcu-r5f0_1-fw 2 /lib/firmware/j784s4-main-r5f0_0-fw 3 /lib/firmware/j784s4-main-r5f0_1-fw 4 /lib/firmware/j784s4-main-r5f1_0-fw 5 /lib/firmware/j784s4-main-r5f1_1-fw 6 /lib/firmware/j784s4-main-r5f2_0-fw 7 /lib/firmware/j784s4-main-r5f2_1-fw 8 /lib/firmware/j784s4-c71_0-fw 9 /lib/firmware/j784s4-c71_1-fw 10 /lib/firmware/j784s4-c71_2-fw 11 /lib/firmware/j784s4-c71_3-fw | |
| rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi | |
| run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring} | |
| run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr} | |
| scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi; | |
| scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist | |
| scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile | |
| scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi | |
| scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done | |
| scriptaddr=0x80000000 | |
| scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi | |
| scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi | |
| scsirootfstype=ext4 rootwait | |
| secure_rprocs=0 | |
| serial#=0000000000000082 | |
| serverip=192.168.0.1 | |
| soc=k3 | |
| splashfile=ti.gz | |
| splashimage=0x82000000 | |
| splashpos=m,m | |
| splashsource=mmc | |
| stderr=serial@2880000 | |
| stdin=serial@2880000 | |
| stdout=serial@2880000 | |
| ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi | |
| ufs_finduuid=part uuid scsi ${bootpart} uuid | |
| update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit} | |
| usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi | |
| vendor=ti | |
| Environment size: 12215/262139 bytes | |
| => tftp ${loadaddr} 192.168.0.1:vatf_j784s4-evm/ddbfb9db45cc797ec4913208c3add362 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.142 | |
| Filename 'vatf_j784s4-evm/ddbfb9db45cc797ec4913208c3add362'. | |
| Load address: 0x82000000 | |
| Loading: *################################################## 20.9 MiB | |
| 21.2 MiB/s | |
| done | |
| Bytes transferred = 21926400 (14e9200 hex) | |
| => tftp ${fdt_addr_r} 192.168.0.1:vatf_j784s4-evm/cfdbf6d682bdb830a665044c8cd86f13 | |
| am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2 | |
| link up on port 1, speed 1000, full duplex | |
| Using ethernet@46000000port@1 device | |
| TFTP from server 192.168.0.1; our IP address is 192.168.0.142 | |
| Filename 'vatf_j784s4-evm/cfdbf6d682bdb830a665044c8cd86f13'. | |
| Load address: 0x88000000 | |
| Loading: *################################################## 71.5 KiB | |
| 10 MiB/s | |
| done | |
| Bytes transferred = 73215 (11dff hex) | |
| => fdt address ${fdt_addr_r} | |
| Working FDT set to 88000000 | |
| => printenv bootargs | |
| bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp | |
| => setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j784s4-evm/autofs/bb5db8368343d23b37b2cc55731e15dc,nolock,v3,tcp,rsize=4096,wsize=4096 ' | |
| => printenv bootcmd | |
| bootcmd= | |
| => setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi' | |
| => version | |
| U-Boot 2023.04-g4c358e4785 (Oct 26 2023 - 22:04:09 +0000) | |
| aarch64-oe-linux-gcc (GCC) 11.4.0 | |
| GNU ld (GNU Binutils) 2.38.20220708 | |
| => bdinfo | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x000000007fffffff | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x000000077fffffff | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffec6000 | |
| reloc off = 0x000000007f6c6000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 68:e7:4a:08:40:77 | |
| IP addr = 192.168.0.142 | |
| fdt_blob = 0x00000000fde71450 | |
| new_fdt = 0x00000000fde71450 | |
| fdt_size = 0x0000000000014960 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xfffffffe], 0x7fffffff bytes flags: 0 | |
| memory[1] [0x880000000-0xffffffffe], 0x77fffffff bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xabffffff], 0x0d800000 bytes flags: 4 | |
| reserved[1] [0xfce62000-0xfffffffe], 0x0319dfff bytes flags: 0 | |
| reserved[2] [0x880000000-0xfffffefff], 0x77ffff000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde71440 | |
| sp start = 0x00000000fde71440 | |
| Early malloc usage: 3008 / 8000 | |
| => | |
| boot_params = 0x0000000000000000 | |
| DRAM bank = 0x0000000000000000 | |
| -> start = 0x0000000080000000 | |
| -> size = 0x000000007fffffff | |
| DRAM bank = 0x0000000000000001 | |
| -> start = 0x0000000880000000 | |
| -> size = 0x000000077fffffff | |
| flashstart = 0x0000000000000000 | |
| flashsize = 0x0000000000000000 | |
| flashoffset = 0x0000000000000000 | |
| baudrate = 115200 bps | |
| relocaddr = 0x00000000ffec6000 | |
| reloc off = 0x000000007f6c6000 | |
| Build = 64-bit | |
| current eth = ethernet@46000000port@1 | |
| ethaddr = 68:e7:4a:08:40:77 | |
| IP addr = 192.168.0.142 | |
| fdt_blob = 0x00000000fde71450 | |
| new_fdt = 0x00000000fde71450 | |
| fdt_size = 0x0000000000014960 | |
| lmb_dump_all: | |
| memory.cnt = 0x2 | |
| memory[0] [0x80000000-0xfffffffe], 0x7fffffff bytes flags: 0 | |
| memory[1] [0x880000000-0xffffffffe], 0x77fffffff bytes flags: 0 | |
| reserved.cnt = 0x3 | |
| reserved[0] [0x9e800000-0xabffffff], 0x0d800000 bytes flags: 4 | |
| reserved[1] [0xfce62000-0xfffffffe], 0x0319dfff bytes flags: 0 | |
| reserved[2] [0x880000000-0xfffffefff], 0x77ffff000 bytes flags: 0 | |
| devicetree = separate | |
| arch_number = 0x0000000000000000 | |
| TLB addr = 0x00000000ffff0000 | |
| irq_sp = 0x00000000fde71440 | |
| sp start = 0x00000000fde71440 | |
| Early malloc usage: 3008 / 8000 | |
| => ls mmc 0:1 | |
| 0 file(s), 0 dir(s) | |
| => ls mmc 1:1 | |
| EFI/ | |
| 21649920 Image | |
| 517337 tiboot3.bin | |
| 517337 tiboot3-j784s4-gp-evm.bin | |
| 519926 tiboot3-j784s4-hs-fs-evm.bin | |
| 1078267 tispl.bin | |
| 1326363 u-boot.img | |
| 574 uEnv.txt | |
| 4 ws-calibrate.rules | |
| 0 test | |
| 9 file(s), 1 dir(s) | |
| => ext4ls mmc 0:2 /lib/firmware | |
| => ext4ls mmc 1:2 /lib/firmware | |
| <DIR> 4096 . | |
| <DIR> 4096 .. | |
| 2040 LICENCE.ibt_firmware | |
| 2046 LICENCE.iwlwifi_firmware | |
| 478552 bl32.bin | |
| 4295688 bl32.elf | |
| <DIR> 4096 cadence | |
| <DIR> 4096 cnm | |
| <DIR> 4096 intel | |
| 918268 iwlwifi-3160-17.ucode | |
| 2448976 iwlwifi-8000C-34.ucode | |
| 2428004 iwlwifi-8000C-36.ucode | |
| 2440780 iwlwifi-8265-34.ucode | |
| 2436632 iwlwifi-8265-36.ucode | |
| 2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| 2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| 1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| <SYM> 66 j784s4-c71_0-fw | |
| <SYM> 73 j784s4-c71_0-fw-sec | |
| <SYM> 66 j784s4-c71_1-fw | |
| <SYM> 73 j784s4-c71_1-fw-sec | |
| <SYM> 66 j784s4-c71_2-fw | |
| <SYM> 73 j784s4-c71_2-fw-sec | |
| <SYM> 66 j784s4-c71_3-fw | |
| <SYM> 73 j784s4-c71_3-fw-sec | |
| <SYM> 68 j784s4-main-r5f0_0-fw | |
| <SYM> 75 j784s4-main-r5f0_0-fw-sec | |
| <SYM> 68 j784s4-main-r5f0_1-fw | |
| <SYM> 75 j784s4-main-r5f0_1-fw-sec | |
| <SYM> 68 j784s4-main-r5f1_0-fw | |
| <SYM> 75 j784s4-main-r5f1_0-fw-sec | |
| <SYM> 68 j784s4-main-r5f1_1-fw | |
| <SYM> 75 j784s4-main-r5f1_1-fw-sec | |
| <SYM> 68 j784s4-main-r5f2_0-fw | |
| <SYM> 75 j784s4-main-r5f2_0-fw-sec | |
| <SYM> 68 j784s4-main-r5f2_1-fw | |
| <SYM> 75 j784s4-main-r5f2_1-fw-sec | |
| <SYM> 68 j784s4-mcu-r5f0_1-fw | |
| <SYM> 75 j784s4-mcu-r5f0_1-fw-sec | |
| 4728 regulatory.db | |
| 1182 regulatory.db.p7s | |
| 151552 rgx.fw.36.53.104.796 | |
| 383136 rgx.sh.36.53.104.796 | |
| 28 tee-header_v2.bin | |
| 0 tee-pageable_v2.bin | |
| 478552 tee-pager_v2.bin | |
| 478552 tee-raw.bin | |
| 478580 tee.bin | |
| 4295688 tee.elf | |
| <DIR> 4096 ti-connectivity | |
| <DIR> 4096 ti-eth | |
| <DIR> 4096 ti-ipc | |
| <SYM> 39 wave521c_codec_fw.bin | |
| => mmc rescan; echo $? | |
| 0 | |
| => fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4 | |
| 4 bytes written in 26 ms (0 Bytes/s) | |
| => boot | |
| ## Checking Image at 82000000 ... | |
| Unknown image format! | |
| ## Flattened Device Tree blob at 88000000 | |
| Booting using the fdt blob at 0x88000000 | |
| Working FDT set to 88000000 | |
| Loading Device Tree to 000000008ffeb000, end 000000008ffffdfe ... OK | |
| Working FDT set to 8ffeb000 | |
| Starting kernel ... | |
| [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080] | |
| [ 0.000000] Linux version 6.7.0-rc1-next-20231116-00004-g3e504d2927ed (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 | |
| [ 0.000000] KASLR disabled due to lack of seed | |
| [ 0.000000] Machine model: Texas Instruments J784S4 EVM | |
| [ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002880000 (options '') | |
| [ 0.000000] printk: legacy bootconsole [ns16550a0] enabled | |
| [ 0.000000] efi: UEFI not found. | |
| [ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a6000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a6000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a6100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable r5f-memory@a6100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a7000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a7000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node r5f-memory@a7100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable r5f-memory@a7100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a9000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a9000000..0x00000000a90fffff (1024 KiB) nomap non-reusable c71-dma-memory@a9000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a9100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@a9100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000a9100000..0x00000000a9ffffff (15360 KiB) nomap non-reusable c71-memory@a9100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000aa000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@aa000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000aa0fffff (1024 KiB) nomap non-reusable c71-dma-memory@aa000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000aa100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@aa100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000aa100000..0x00000000aaffffff (15360 KiB) nomap non-reusable c71-memory@aa100000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ab000000, size 1 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-dma-memory@ab000000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000ab000000..0x00000000ab0fffff (1024 KiB) nomap non-reusable c71-dma-memory@ab000000 | |
| [ 0.000000] Reserved memory: created DMA memory pool at 0x00000000ab100000, size 15 MiB | |
| [ 0.000000] OF: reserved mem: initialized node c71-memory@ab100000, compatible id shared-dma-pool | |
| [ 0.000000] OF: reserved mem: 0x00000000ab100000..0x00000000abffffff (15360 KiB) nomap non-reusable c71-memory@ab100000 | |
| [ 0.000000] Zone ranges: | |
| [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff] | |
| [ 0.000000] DMA32 empty | |
| [ 0.000000] Normal [mem 0x0000000100000000-0x0000000fffffefff] | |
| [ 0.000000] Movable zone start for each node | |
| [ 0.000000] Early memory node ranges | |
| [ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff] | |
| [ 0.000000] node 0: [mem 0x000000009e800000-0x00000000abffffff] | |
| [ 0.000000] node 0: [mem 0x00000000ac000000-0x00000000ffffefff] | |
| [ 0.000000] node 0: [mem 0x0000000880000000-0x0000000fffffefff] | |
| [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x0000000fffffefff] | |
| [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges | |
| [ 0.000000] On node 0, zone Normal: 1 pages in unavailable ranges | |
| [ 0.000000] cma: Reserved 32 MiB at 0x00000000fde00000 on node -1 | |
| [ 0.000000] psci: probing for conduit method from DT. | |
| [ 0.000000] psci: PSCIv1.1 detected in firmware. | |
| [ 0.000000] psci: Using standard PSCI v0.2 function IDs | |
| [ 0.000000] psci: Trusted OS migration not required | |
| [ 0.000000] psci: SMC Calling Convention v1.4 | |
| [ 0.000000] percpu: Embedded 20 pages/cpu s43304 r8192 d30424 u81920 | |
| [ 0.000000] Detected PIPT I-cache on CPU0 | |
| [ 0.000000] CPU features: detected: GIC system register CPU interface | |
| [ 0.000000] CPU features: detected: Spectre-v3a | |
| [ 0.000000] CPU features: detected: Spectre-BHB | |
| [ 0.000000] CPU features: detected: ARM erratum 1742098 | |
| [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 | |
| [ 0.000000] alternatives: applying boot alternatives | |
| [ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j784s4-evm/autofs/bb5db8368343d23b37b2cc55731e15dc,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| [ 0.000000] sysrq: sysrq always enabled. | |
| [ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space. | |
| [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) | |
| [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) | |
| [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8257534 | |
| [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
| [ 0.000000] software IO TLB: area num 8. | |
| [ 0.000000] software IO TLB: mapped [mem 0x00000000f9e00000-0x00000000fde00000] (64MB) | |
| [ 0.000000] Memory: 32572404K/33554424K available (12608K kernel code, 1252K rwdata, 4652K rodata, 2752K init, 500K bss, 949252K reserved, 32768K cma-reserved) | |
| [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 | |
| [ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
| [ 0.000000] rcu: RCU event tracing is enabled. | |
| [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. | |
| [ 0.000000] Trampoline variant of Tasks RCU enabled. | |
| [ 0.000000] Tracing variant of Tasks RCU enabled. | |
| [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. | |
| [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 | |
| [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 | |
| [ 0.000000] GICv3: [Firmware Bug]: GICR region 0x0000000001900000 has overlapping address | |
| [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode | |
| [ 0.000000] GICv3: 960 SPIs implemented | |
| [ 0.000000] GICv3: 0 Extended SPIs implemented | |
| [ 0.000000] Root IRQ handler: gic_handle_irq | |
| [ 0.000000] GICv3: GICv3 features: 16 PPIs | |
| [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000 | |
| [ 0.000000] ITS [mem 0x01820000-0x0182ffff] | |
| [ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS | |
| [ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19 | |
| [ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880800000 (flat, esz 8, psz 64K, shr 0) | |
| [ 0.000000] ITS: using cache flushing for cmd queue | |
| [ 0.000000] GICv3: using LPI property table @0x0000000880060000 | |
| [ 0.000000] GIC: using cache flushing for LPI property table | |
| [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880070000 | |
| [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
| [ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys). | |
| [ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns | |
| [ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns | |
| [ 0.008486] Console: colour dummy device 80x25 | |
| [ 0.013054] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000) | |
| [ 0.023726] pid_max: default: 32768 minimum: 301 | |
| [ 0.028488] LSM: initializing lsm=capability,integrity | |
| [ 0.033840] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.041636] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) | |
| [ 0.050830] RCU Tasks: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.058083] RCU Tasks Trace: Setting shift to 3 and lim to 1 rcu_task_cb_adjust=1. | |
| [ 0.065934] rcu: Hierarchical SRCU implementation. | |
| [ 0.070829] rcu: Max phase no-delay instances is 1000. | |
| [ 0.076312] Platform MSI: msi-controller@1820000 domain created | |
| [ 0.082461] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created | |
| [ 0.091845] EFI services will not be available. | |
| [ 0.096675] smp: Bringing up secondary CPUs ... | |
| I/TC: Secondary CPU 1 initializing | |
| I/TC: Secondary CPU 1 switching to normal world boot | |
| I/TC: Secondary CPU 2 initializing | |
| I/TC: Secondary CPU 2 switching to normal world boot | |
| I/TC: Secondary CPU 3 initializing | |
| I/TC: Secondary CPU 3 switching to normal world boot | |
| I/TC: Secondary CPU 2 initializing | |
| I/TC: Secondary CPU 2 switching to normal world boot | |
| I/TC: Secondary CPU 3 initializing | |
| I/TC: Secondary CPU 3 switching to normal world boot | |
| I/TC: Secondary CPU 4 initializing | |
| I/TC: Secondary CPU 4 switching to normal world boot | |
| I/TC: Secondary CPU 5 initializing | |
| I/TC: Secondary CPU 5 switching to normal world boot | |
| [ 0.109725] Detected PIPT I-cache on CPU1 | |
| [ 0.109764] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000 | |
| [ 0.109777] GICv3: CPU1: using allocated LPI pending table @0x0000000880080000 | |
| [ 0.109808] CPU1: Booted secondary processor 0x0000000001 [0x411fd080] | |
| [ 0.118255] Detected PIPT I-cache on CPU2 | |
| [ 0.118284] GICv3: CPU2: found redistributor 2 region 0:0x0000000001940000 | |
| [ 0.118297] GICv3: CPU2: using allocated LPI pending table @0x0000000880090000 | |
| [ 0.118321] CPU2: Booted secondary processor 0x0000000002 [0x411fd080] | |
| [ 0.126733] Detected PIPT I-cache on CPU3 | |
| [ 0.126762] GICv3: CPU3: found redistributor 3 region 0:0x0000000001960000 | |
| [ 0.126774] GICv3: CPU3: using allocated LPI pending table @0x00000008800a0000 | |
| [ 0.126799] CPU3: Booted secondary processor 0x0000000003 [0x411fd080] | |
| [ 0.135253] Detected PIPT I-cache on CPU4 | |
| [ 0.135310] GICv3: CPU4: found redistributor 100 region 0:0x0000000001980000 | |
| [ 0.135324] GICv3: CPU4: using allocated LPI pending table @0x00000008800b0000 | |
| [ 0.135355] CPU4: Booted secondary processor 0x0000000100 [0x411fd080] | |
| [ 0.143806] Detected PIPT I-cache on CPU5 | |
| [ 0.143841] GICv3: CPU5: found redistributor 101 region 0:0x00000000019a0000 | |
| [ 0.143854] GICv3: CPU5: using allocated LPI pending table @0x00000008800c0000 | |
| [ 0.143878] CPU5: Booted secondary processor 0x0000000101 [0x411fd080] | |
| [ 0.152303] Detected PIPT I-cache on CPU6 | |
| [ 0.152340] GICv3: CPU6: found redistributor 102 region 0:0x00000000019c0000 | |
| [ 0.152354] GICv3: CPU6: using allocated LPI pending table @0x00000008800d0000 | |
| [ 0.152378] CPU6: Booted secondary processor 0x0000000102 [0x411fd080] | |
| [ 0.160800] Detected PIPT I-cache on CPU7 | |
| [ 0.160841] GICv3: CPU7: found redistributor 103 region 0:0x00000000019e0000 | |
| [ 0.160853] GICv3: CPU7: using allocated LPI pending table @0x00000008800e0000 | |
| [ 0.160877] CPU7: Booted secondary processor 0x0000000103 [0x411fd080] | |
| [ 0.160926] smp: Brought up 1 node, 8 CPUs | |
| [ 0.341907] SMP: Total of 8 processors activated. | |
| [ 0.346714] CPU features: detected: 32-bit EL0 Support | |
| [ 0.351969] CPU features: detected: CRC32 instructions | |
| [ 0.565605] CPU: All CPU(s) started at EL2 | |
| [ 0.569810] alternatives: applying system-wide alternatives | |
| [ 0.576570] devtmpfs: initialized | |
| [ 0.588743] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
| [ 0.598721] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) | |
| [ 0.606292] pinctrl core: initialized pinctrl subsystem | |
| [ 0.611822] DMI not present or invalid. | |
| [ 0.616162] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
| [ 0.623253] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations | |
| [ 0.631304] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations | |
| [ 0.640053] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations | |
| [ 0.648261] audit: initializing netlink subsys (disabled) | |
| [ 0.653858] audit: type=2000 audit(0.304:1): state=initialized audit_enabled=0 res=1 | |
| [ 0.654047] thermal_sys: Registered thermal governor 'step_wise' | |
| [ 0.661785] thermal_sys: Registered thermal governor 'power_allocator' | |
| [ 0.667939] cpuidle: using governor menu | |
| [ 0.678684] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. | |
| [ 0.685701] ASID allocator initialised with 65536 entries | |
| [ 0.700116] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/bridge@a000000/ports/port@0/endpoint | |
| [ 0.711117] platform connector-dp0: Fixed dependency cycle(s) with /bus@100000/bridge@a000000/ports/port@4/endpoint | |
| [ 0.722105] Modules: 27280 pages in range for non-PLT usage | |
| [ 0.722108] Modules: 518800 pages in range for PLT usage | |
| [ 0.728172] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages | |
| [ 0.740539] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page | |
| [ 0.746942] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages | |
| [ 0.753876] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page | |
| [ 0.760278] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages | |
| [ 0.767213] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page | |
| [ 0.773614] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages | |
| [ 0.780553] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page | |
| [ 0.787803] k3-chipinfo 43000014.chipid: Family:J784S4 rev:SR1.0 JTAGID[0x0bb8002f] Detected | |
| [ 0.796709] iommu: Default domain type: Translated | |
| [ 0.801604] iommu: DMA domain TLB invalidation policy: strict mode | |
| [ 0.808039] SCSI subsystem initialized | |
| [ 0.812019] usbcore: registered new interface driver usbfs | |
| [ 0.817638] usbcore: registered new interface driver hub | |
| [ 0.823082] usbcore: registered new device driver usb | |
| [ 0.828501] pps_core: LinuxPPS API ver. 1 registered | |
| [ 0.833573] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
| [ 0.842912] PTP clock support registered | |
| [ 0.846934] EDAC MC: Ver: 3.0.0 | |
| [ 0.850351] scmi_core: SCMI protocol bus registered | |
| [ 0.855508] FPGA manager framework | |
| [ 0.859010] Advanced Linux Sound Architecture Driver Initialized. | |
| [ 0.865613] vgaarb: loaded | |
| [ 0.868518] clocksource: Switched to clocksource arch_sys_counter | |
| [ 0.874866] VFS: Disk quotas dquot_6.6.0 | |
| [ 0.878889] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) | |
| [ 0.889004] NET: Registered PF_INET protocol family | |
| [ 0.894266] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.907083] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear) | |
| [ 0.916107] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
| [ 0.924041] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) | |
| [ 0.933121] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) | |
| [ 0.941509] TCP: Hash tables configured (established 262144 bind 65536) | |
| [ 0.948371] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear) | |
| [ 0.955725] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear) | |
| [ 0.963596] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
| [ 0.969666] RPC: Registered named UNIX socket transport module. | |
| [ 0.975725] RPC: Registered udp transport module. | |
| [ 0.980528] RPC: Registered tcp transport module. | |
| [ 0.985331] RPC: Registered tcp-with-tls transport module. | |
| [ 0.990934] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
| [ 0.997522] PCI: CLS 0 bytes, default 64 | |
| [ 1.002480] Initialise system trusted keyrings | |
| [ 1.007112] workingset: timestamp_bits=46 max_order=23 bucket_order=0 | |
| [ 1.013857] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
| [ 1.019950] NFS: Registering the id_resolver key type | |
| [ 1.025126] Key type id_resolver registered | |
| [ 1.029398] Key type id_legacy registered | |
| [ 1.033500] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
| [ 1.040348] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
| [ 1.047965] 9p: Installing v9fs 9p2000 file system support | |
| [ 1.074682] Key type asymmetric registered | |
| [ 1.078866] Asymmetric key parser 'x509' registered | |
| [ 1.083872] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) | |
| [ 1.091432] io scheduler mq-deadline registered | |
| [ 1.096058] io scheduler kyber registered | |
| [ 1.100171] io scheduler bfq registered | |
| [ 1.105560] pinctrl-single 4301c000.pinctrl: 13 pins, size 52 | |
| [ 1.111522] pinctrl-single 4301c038.pinctrl: 11 pins, size 44 | |
| [ 1.117567] pinctrl-single 4301c068.pinctrl: 72 pins, size 288 | |
| [ 1.123694] pinctrl-single 4301c190.pinctrl: 1 pins, size 4 | |
| [ 1.129505] pinctrl-single 11c000.pinctrl: 72 pins, size 288 | |
| [ 1.135479] pinctrl-single 104200.pinctrl: 20 pins, size 80 | |
| [ 1.141240] pinctrl-single 104280.pinctrl: 8 pins, size 32 | |
| [ 1.150954] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled | |
| [ 1.158539] STM32 USART driver initialized | |
| [ 1.166559] loop: module loaded | |
| [ 1.170201] megasas: 07.727.03.00-rc1 | |
| [ 1.175829] tun: Universal TUN/TAP device driver, 1.6 | |
| [ 1.181386] thunder_xcv, ver 1.0 | |
| [ 1.184695] thunder_bgx, ver 1.0 | |
| [ 1.187993] nicpf, ver 1.0 | |
| [ 1.191005] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version | |
| [ 1.198386] hns3: Copyright (c) 2017 Huawei Corporation. | |
| [ 1.203824] hclge is initializing | |
| [ 1.207223] e1000: Intel(R) PRO/1000 Network Driver | |
| [ 1.212204] e1000: Copyright (c) 1999-2006 Intel Corporation. | |
| [ 1.218083] e1000e: Intel(R) PRO/1000 Network Driver | |
| [ 1.223155] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. | |
| [ 1.229213] igb: Intel(R) Gigabit Ethernet Network Driver | |
| [ 1.234727] igb: Copyright (c) 2007-2014 Intel Corporation. | |
| [ 1.240427] igbvf: Intel(R) Gigabit Virtual Function Network Driver | |
| [ 1.246829] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. | |
| [ 1.252945] sky2: driver version 1.30 | |
| [ 1.257147] VFIO - User Level meta-driver version: 0.3 | |
| [ 1.263064] usbcore: registered new interface driver usb-storage | |
| [ 1.269753] i2c_dev: i2c /dev entries driver | |
| [ 1.275192] sdhci: Secure Digital Host Controller Interface driver | |
| [ 1.281510] sdhci: Copyright(c) Pierre Ossman | |
| [ 1.286267] Synopsys Designware Multimedia Card Interface Driver | |
| [ 1.292697] sdhci-pltfm: SDHCI platform and OF driver helper | |
| [ 1.299160] ledtrig-cpu: registered to indicate activity on CPUs | |
| [ 1.305467] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... | |
| [ 1.312506] usbcore: registered new interface driver usbhid | |
| [ 1.318200] usbhid: USB HID core driver | |
| [ 1.323017] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available | |
| [ 1.331649] optee: probing for conduit method. | |
| I/TC: Reserved shared memory is enabled | |
| I/TC: Dynamic shared memory is enabled | |
| I/TC: Normal World virtualization support is disabled | |
| I/TC: Asynchronous notifications are disabled | |
| [ 1.336206] optee: revision 3.20 (8e74d476) | |
| [ 1.352612] optee: dynamic shared memory is enabled | |
| [ 1.362272] random: crng init done | |
| [ 1.365803] optee: initialized driver | |
| [ 1.369657] mmio-mux 104080.mux-controller: failed to get regmap: -19 | |
| [ 1.376929] NET: Registered PF_PACKET protocol family | |
| [ 1.382142] 9pnet: Installing 9P2000 support | |
| [ 1.386526] Key type dns_resolver registered | |
| [ 1.394235] registered taskstats version 1 | |
| [ 1.398540] Loading compiled-in X.509 certificates | |
| [ 1.408961] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.1.2--v09.01.02 (Kool Koala)') | |
| [ 1.466193] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz | |
| [ 1.472454] pca953x 3-0020: supply vcc not found, using dummy regulator | |
| [ 1.479284] pca953x 3-0020: using no AI | |
| [ 1.505137] pca953x 3-0022: supply vcc not found, using dummy regulator | |
| [ 1.511942] pca953x 3-0022: using AI | |
| [ 1.516213] omap_i2c 2000000.i2c: bus 3 rev0.12 at 400 kHz | |
| [ 1.522246] pca953x 4-0020: supply vcc not found, using dummy regulator | |
| [ 1.529057] pca953x 4-0020: using no AI | |
| [ 1.556818] omap_i2c 2040000.i2c: bus 4 rev0.12 at 400 kHz | |
| [ 1.562526] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 177 domain created | |
| [ 1.571060] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 10 domain created | |
| [ 1.580323] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 283 domain created | |
| [ 1.588922] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 321 created | |
| [ 1.597953] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:328 | |
| [ 1.607832] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.614592] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.623910] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[878,128] sci-dev-id:315 | |
| [ 1.634062] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled | |
| [ 1.640821] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64 | |
| [ 1.648840] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 187, base_baud = 6000000) is a 8250 | |
| [ 1.658407] 2880000.serial: ttyS2 at MMIO 0x2880000 (irq = 188, base_baud = 3000000) is a 8250 | |
| [ 1.667256] printk: legacy console [ttyS2] enabled | |
| [ 1.667256] printk: legacy console [ttyS2] enabled | |
| [ 1.676933] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.676933] printk: legacy bootconsole [ns16550a0] disabled | |
| [ 1.732523] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 1.743485] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 1.751756] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 1.764608] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 1.771815] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 1.779116] mmc0: CQHCI version 5.10 | |
| [ 1.801557] ti-udma 285c0000.dma-controller: Channels: 22 (tchan: 11, rchan: 11, gp-rflow: 8) | |
| [ 1.811753] ti-udma 31150000.dma-controller: Channels: 66 (tchan: 33, rchan: 33, gp-rflow: 16) | |
| [ 1.823100] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit | |
| [ 1.824198] spi-nor spi0.0: s28hs512t (65536 Kbytes) | |
| [ 1.835744] 7 fixed-partitions partitions found on MTD device 47040000.spi.0 | |
| [ 1.842785] Creating 7 MTD partitions on "47040000.spi.0": | |
| [ 1.848271] 0x000000000000-0x000000080000 : "ospi.tiboot3" | |
| [ 1.854397] 0x000000080000-0x000000280000 : "ospi.tispl" | |
| [ 1.860219] 0x000000280000-0x000000680000 : "ospi.u-boot" | |
| [ 1.866134] 0x000000680000-0x0000006c0000 : "ospi.env" | |
| [ 1.871780] 0x0000006c0000-0x000000700000 : "ospi.env.backup" | |
| [ 1.878014] 0x000000800000-0x000003fc0000 : "ospi.rootfs" | |
| [ 1.883890] 0x000003fc0000-0x000004000000 : "ospi.phypattern" | |
| [ 1.891913] spi-nor spi1.0: mt25qu512a (65536 Kbytes) | |
| [ 1.897223] 7 fixed-partitions partitions found on MTD device 47050000.spi.0 | |
| [ 1.904263] Creating 7 MTD partitions on "47050000.spi.0": | |
| [ 1.909735] 0x000000000000-0x000000080000 : "qspi.tiboot3" | |
| [ 1.915360] mmc0: Command Queue Engine enabled | |
| [ 1.915767] 0x000000080000-0x000000280000 : "qspi.tispl" | |
| [ 1.919806] mmc0: new HS400 MMC card at address 0001 | |
| [ 1.925586] 0x000000280000-0x000000680000 : "qspi.u-boot" | |
| [ 1.930355] mmcblk0: mmc0:0001 G1M15L 29.6 GiB | |
| [ 1.935931] 0x000000680000-0x0000006c0000 : "qspi.env" | |
| [ 1.940787] mmcblk0: p1 p2 p3 | |
| [ 1.945536] 0x0000006c0000-0x000000700000 : "qspi.env.backup" | |
| [ 1.948359] mmcblk0boot0: mmc0:0001 G1M15L 31.5 MiB | |
| [ 1.954330] 0x000000800000-0x000003fc0000 : "qspi.rootfs" | |
| [ 1.959262] mmcblk0boot1: mmc0:0001 G1M15L 31.5 MiB | |
| [ 1.964612] 0x000003fc0000-0x000004000000 : "qspi.phypattern" | |
| [ 1.969455] mmcblk0rpmb: mmc0:0001 G1M15L 4.00 MiB, chardev (240:0) | |
| [ 2.012531] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000 | |
| [ 2.023397] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867 | |
| [ 2.031666] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000 | |
| [ 2.044530] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4 | |
| [ 2.051738] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64 | |
| [ 2.058379] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48 | |
| [ 2.066340] mmc1: CQHCI version 5.10 | |
| [ 2.107089] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit | |
| [ 2.126716] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL) | |
| [ 2.136187] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode | |
| [ 2.151512] mmc1: new high speed SDHC card at address aaaa | |
| [ 2.157317] mmcblk1: mmc1:aaaa SL32G 29.7 GiB | |
| [ 2.165984] mmcblk1: p1 p2 p3 | |
| [ 6.225992] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx | |
| [ 6.256521] Sending DHCP requests ., OK | |
| [ 6.280353] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.142 | |
| [ 6.288088] IP-Config: Complete: | |
| [ 6.291306] device=eth0, hwaddr=68:e7:4a:08:40:77, ipaddr=192.168.0.142, mask=255.255.255.0, gw=192.168.0.1 | |
| [ 6.301461] host=192.168.0.142, domain=ti.com, nis-domain=(none) | |
| [ 6.307887] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath= | |
| [ 6.307890] nameserver0=192.0.2.2, nameserver1=192.0.2.3 | |
| [ 6.320576] clk: Disabling unused clocks | |
| [ 6.335306] ALSA device list: | |
| [ 6.338276] No soundcards found. | |
| [ 6.355518] VFS: Mounted root (nfs filesystem) on device 0:21. | |
| [ 6.361564] devtmpfs: mounted | |
| [ 6.365483] Freeing unused kernel memory: 2752K | |
| [ 6.376604] Run /sbin/init as init process | |
| [ 6.475728] systemd[1]: System time before build time, advancing clock. | |
| [ 6.499700] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK +XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid) | |
| [ 6.531295] systemd[1]: Detected architecture arm64. | |
| Welcome to [1mArago 2023.04[0m! | |
| [ 6.601906] systemd[1]: Hostname set to <j784s4-evm>. | |
| [ 6.609736] systemd[1]: Initializing machine ID from random generator. | |
| [ 6.700990] systemd[123]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1. | |
| [ 6.701752] systemd-sysv-generator[132]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.736123] systemd-sysv-generator[132]: SysV service '/etc/init.d/sysrepo' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.760555] systemd-sysv-generator[132]: SysV service '/etc/init.d/netopeer2-server' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust. | |
| [ 6.922272] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.931157] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6. | |
| [ 6.958548] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 7.007269] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether. | |
| [ 7.062806] systemd[1]: Queued start job for default target Graphical Interface. | |
| [ 7.123365] systemd[1]: Created slice Slice /system/getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m. | |
| [ 7.145704] systemd[1]: Created slice Slice /system/modprobe. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m. | |
| [ 7.169568] systemd[1]: Created slice Slice /system/serial-getty. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m. | |
| [ 7.193397] systemd[1]: Created slice User and Session Slice. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m. | |
| [ 7.216675] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m. | |
| [ 7.240632] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
| [[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m. | |
| [ 7.264697] systemd[1]: Reached target Path Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mPath Units[0m. | |
| [ 7.280582] systemd[1]: Reached target Remote File Systems. | |
| [[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m. | |
| [ 7.300572] systemd[1]: Reached target Slice Units. | |
| [[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m. | |
| [ 7.316583] systemd[1]: Reached target Swaps. | |
| [[0;32m OK [0m] Reached target [0;1;39mSwaps[0m. | |
| [ 7.354913] systemd[1]: Listening on RPCbind Server Activation Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m. | |
| [ 7.376644] systemd[1]: Reached target RPC Port Mapper. | |
| [[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m. | |
| [ 7.400614] systemd[1]: Listening on Process Core Dump Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m. | |
| [ 7.420677] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
| [[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m. | |
| [ 7.445439] systemd[1]: Listening on Journal Audit Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m. | |
| [ 7.469266] systemd[1]: Listening on Journal Socket (/dev/log). | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m. | |
| [ 7.492774] systemd[1]: Listening on Journal Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m. | |
| [ 7.509452] systemd[1]: Listening on Network Service Netlink Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m. | |
| [ 7.534047] systemd[1]: Listening on udev Control Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m. | |
| [ 7.556695] systemd[1]: Listening on udev Kernel Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m. | |
| [ 7.577148] systemd[1]: Listening on User Database Manager Socket. | |
| [[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m. | |
| [ 7.620732] systemd[1]: Mounting Huge Pages File System... | |
| Mounting [0;1;39mHuge Pages File System[0m... | |
| [ 7.638773] systemd[1]: Mounting POSIX Message Queue File System... | |
| Mounting [0;1;39mPOSIX Message Queue File System[0m... | |
| [ 7.662728] systemd[1]: Mounting Kernel Debug File System... | |
| Mounting [0;1;39mKernel Debug File System[0m... | |
| [ 7.676706] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing). | |
| [ 7.693382] systemd[1]: Mounting Temporary Directory /tmp... | |
| Mounting [0;1;39mTemporary Directory /tmp[0m... | |
| [ 7.708742] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed/modules.devname). | |
| [ 7.728930] systemd[1]: Starting Load Kernel Module configfs... | |
| Starting [0;1;39mLoad Kernel Module configfs[0m... | |
| [ 7.746618] systemd[1]: Starting Load Kernel Module drm... | |
| Starting [0;1;39mLoad Kernel Module drm[0m... | |
| [ 7.762641] systemd[1]: Starting Load Kernel Module fuse... | |
| Starting [0;1;39mLoad Kernel Module fuse[0m... | |
| [ 7.780085] systemd[1]: Starting Start psplash boot splash screen... | |
| Starting [0;1;39mStart psplash boot splash screen[0m... | |
| [ 7.804042] systemd[1]: Starting RPC Bind... | |
| Starting [0;1;39mRPC Bind[0m... | |
| [ 7.817326] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/). | |
| [ 7.833335] systemd[1]: Starting Journal Service... | |
| Starting [0;1;39mJournal Service[0m... | |
| [ 7.853424] systemd[1]: Starting Load Kernel Modules... | |
| Starting [0;1;39mLoad Kernel Modules[0m... | |
| [ 7.871233] systemd[1]: Starting Generate network units from Kernel command line... | |
| Starting [0;1;39mGenerate network ts from Kernel command line[0m... | |
| [ 7.899325] systemd[1]: Starting Remount Root and Kernel File Systems... | |
| Starting [0;1;39mRemount Root and Kernel File Systems[0m... | |
| [ 7.927416] systemd[1]: Starting Coldplug All udev Devices... | |
| Starting [0;1;39mColdplug All udev Devices[0m... | |
| [ 7.952430] systemd[1]: Started RPC Bind. | |
| [[0;32m OK [0m] Started [0;1;39mRPC Bind[0m. | |
| [ 7.968889] systemd[1]: Started Journal Service. | |
| [[0;32m OK [0m] Started [0;1;39mJournal Service[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m. | |
| See 'systemctl status psplash-start.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m. | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m. | |
| See 'systemctl status systemd-modules-load.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m. | |
| Mounting [0;1;39mKernel Configuration File System[0m... | |
| Starting [0;1;39mFlush Journal to Persistent Storage[0m... | |
| [ 8.290958] systemd-journald[147]: Received client request to flush runtime journal. | |
| Starting [0;1;39mApply Kernel Variables[0m... | |
| Starting [0;1;39mCreate System Users[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate System Users[0m. | |
| Starting [0;1;39mCreate Static Device Nodes in /dev[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m. | |
| Mounting [0;1;39m/media/ram[0m... | |
| Mounting [0;1;39m/var/volatile[0m... | |
| [ 8.578753] audit: type=1334 audit(1651167747.100:2): prog-id=5 op=LOAD | |
| [ 8.585399] audit: type=1334 audit(1651167747.108:3): prog-id=6 op=LOAD | |
| Starting [0;1;39mRule-based Managefor Device Events and Files[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m. | |
| Starting [0;1;39mLoad/Save Random Seed[0m... | |
| [[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m. | |
| Starting [0;1;39mRebuild Dynamic Linker Cache[0m... | |
| Starting [0;1;39mCreate Volatile Files and Directories[0m... | |
| [[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m. | |
| Starting [0;1;39mRebuild Journal Catalog[0m... | |
| Starting [0;1;39mNetwork Time Synchronization[0m... | |
| Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Journal Catalog[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRebuild Dynamic Linker Cache[0m. | |
| Starting [0;1;39mRun pending postinsts[0m... | |
| Starting [0;1;39mUpdate is Completed[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUpdate is Completed[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p3[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p3[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p3[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p2[0m. | |
| Mounting [0;1;39m/run/media/mmcblk0p3[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m... | |
| [ 10.263572] EXT4-fs (mmcblk0p3): recovery complete | |
| [ 10.268465] EXT4-fs (mmcblk0p3): mounted filesystem 86529f9d-4f90-4f89-9567-771e85bcd8a5 r/w with ordered data mode. Quota mode: none. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk0p2[0m... | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p3[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p2[0m. | |
| Mounting [0;1;39m/run/media/mmcblk0p1[0m... | |
| Mounting [0;1;39m/run/media/mmcblk0p2[0m... | |
| [ 10.406075] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p1[0m. | |
| [ 10.431265] FAT-fs (mmcblk0p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mRun pending postinsts[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m. | |
| [[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m. | |
| Starting [0;1;39mDocker Socket for the API[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m. | |
| Starting [0;1;39mWeston socket[0m... | |
| Starting [0;1;39mD-Bus System Message Bus[0m... | |
| Starting [0;1;39mReboot and dump vmcore via kexec[0m... | |
| [[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m. | |
| [[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m. | |
| [[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mBasic System[0m. | |
| [[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m. | |
| [[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m. | |
| Starting [0;1;39mPrint notice about GPLv3 packages[0m... | |
| Starting [0;1;39mIPv6 Packet Filtering Framework[0m... | |
| Starting [0;1;39mIPv4 Packet Filtering Framework[0m... | |
| [[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m. | |
| Starting [0;1;39mLighttpd Daemon[0m... | |
| [[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m. | |
| [ 11.064824] audit: type=1334 audit(1651167749.588:4): prog-id=7 op=LOAD | |
| [ 11.071494] audit: type=1334 audit(1651167749.592:5): prog-id=8 op=LOAD | |
| Starting [0;1;39mUser Login Management[0m... | |
| [[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m. | |
| Starting [0;1;39mTelnet Server[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mPrint notice about GPLv3 packages[0m. | |
| See 'systemctl status gplv3-notice.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m. | |
| [[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Login Management[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m. | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m... | |
| Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m... | |
| Starting [0;1;39mNetwork Configuration[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m. | |
| [[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m. | |
| Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m... | |
| Mounting [0;1;39m/run/media/mmcblk1p3[0m... | |
| Mounting [0;1;39m/run/media/root-mmcblk1p2[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m. | |
| Starting [0;1;39mNetwork Name Resolution[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m. | |
| [ 11.768384] EXT4-fs (mmcblk1p3): recovery complete | |
| [ 11.773186] EXT4-fs (mmcblk1p3): mounted filesystem 79e37597-f5f5-434b-8a72-e441ea24e6a9 r/w with ordered data mode. Quota mode: none. | |
| [ 11.779508] EXT4-fs (mmcblk1p2): recovery complete | |
| [ 11.781206] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[[ 11.800219] EXT4-fs (mmcblk1p2): mounted filesystem b37122ca-684b-4281-87b0-9315cf3a8250 r/w with ordered data mode. Quota mode: none. | |
| 0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m. | |
| [[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mNetwork[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m. | |
| Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m... | |
| Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m... | |
| Starting [0;1;39mcontainerd container runtime[0m... | |
| [[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m. | |
| [[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m. | |
| Starting [0;1;39mPermit User Sessions[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mEnable andfigure wl18xx bluetooth stack[0m. | |
| See 'systemctl status bt-enable.service' for details. | |
| [[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m. | |
| [[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m. | |
| [[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m. | |
| Starting [0;1;39mSynchronize System and HW clocks[0m... | |
| Starting [0;1;39mWeston, a Waylandositor, as a system service[0m... | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m. | |
| See 'systemctl status sync-clocks.service' for details. | |
| [ 12.305285] audit: type=1334 audit(1651167750.828:6): prog-id=9 op=LOAD | |
| [ 12.311985] audit: type=1334 audit(1651167750.836:7): prog-id=10 op=LOAD | |
| Starting [0;1;39mUser Database Manager[0m... | |
| [[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m. | |
| [[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m. | |
| Starting [0;1;39mUser Runtime Directory /run/user/1000[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m. | |
| Starting [0;1;39mUser Manager for UID 1000[0m... | |
| [ 12.603063] audit: type=1006 audit(1651167751.124:8): pid=937 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1 | |
| [ 12.615629] audit: type=1300 audit(1651167751.124:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffd7205258 a2=4 a3=ffff9db0d020 items=0 ppid=1 pid=937 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 12.642126] audit: type=1327 audit(1651167751.124:8): proctitle="(systemd)" | |
| [[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m. | |
| [[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m. | |
| [[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m. | |
| [ 12.960343] audit: type=1006 audit(1651167751.480:9): pid=920 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1 | |
| [[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m. | |
| See 'systemctl status weston.service' for details. | |
| [[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m. | |
| [[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m. | |
| Starting [0;1;39mRecord Runlevel Change in UTMP[0m... | |
| [[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m. | |
| _____ _____ _ _ | |
| | _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_ | |
| | | _| .'| . | . | | __| _| . | | | -_| _| _| | |
| |__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_| | |
| |___| |___| | |
| Arago Project j784s4-evm - | |
| Arago 2023.04 j784s4-evm - | |
| j784s4-evm login: root | |
| [ 14.522128] kauditd_printk_skb: 2 callbacks suppressed | |
| [ 14.522134] audit: type=1006 audit(1651167753.044:10): pid=950 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1 | |
| [ 14.539633] audit: type=1300 audit(1651167753.044:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffd7205258 a2=1 a3=ffff9db0d020 items=0 ppid=1 pid=950 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.565920] audit: type=1327 audit(1651167753.044:10): proctitle="(systemd)" | |
| [ 14.572973] audit: type=1334 audit(1651167753.060:11): prog-id=11 op=LOAD | |
| [ 14.579764] audit: type=1300 audit(1651167753.060:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffec5fe610 a2=78 a3=0 items=0 ppid=1 pid=950 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.605097] audit: type=1327 audit(1651167753.060:11): proctitle="(systemd)" | |
| [ 14.612142] audit: type=1334 audit(1651167753.060:12): prog-id=11 op=UNLOAD | |
| [ 14.619099] audit: type=1300 audit(1651167753.060:12): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffff8e9b6020 a2=0 a3=ffff8e9b67e0 items=0 ppid=1 pid=950 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null) | |
| [ 14.645207] audit: type=1327 audit(1651167753.060:12): proctitle="(systemd)" | |
| [ 14.652255] audit: type=1334 audit(1651167753.060:13): prog-id=12 op=LOAD | |
| 7[r[999;999H[6nroot@j784s4-evm:~# uname -a | |
| Linux j784s4-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j784s4-evm:~# cat /proc/cmdline | |
| console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02880000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j784s4-evm/autofs/bb5db8368343d23b37b2cc55731e15dc,nolock,v3,tcp,rsize=4096,wsize=4096 | |
| root@j784s4-evm:~# uname -a | |
| Linux j784s4-evm 6.7.0-rc1-next-20231116-00004-g3e504d2927ed #2 SMP PREEMPT Wed Nov 22 15:37:46 IST 2023 aarch64 aarch64 aarch64 GNU/Linux | |
| root@j784s4-evm:~# cat /proc/mtd | |
| dev: size erasesize name | |
| mtd0: 00080000 00040000 "ospi.tiboot3" | |
| mtd1: 00200000 00040000 "ospi.tispl" | |
| mtd2: 00400000 00040000 "ospi.u-boot" | |
| mtd3: 00040000 00040000 "ospi.env" | |
| mtd4: 00040000 00040000 "ospi.env.backup" | |
| mtd5: 037c0000 00040000 "ospi.rootfs" | |
| mtd6: 00040000 00040000 "ospi.phypattern" | |
| mtd7: 00080000 00001000 "qspi.tiboot3" | |
| mtd8: 00200000 00001000 "qspi.tispl" | |
| mtd9: 00400000 00001000 "qspi.u-boot" | |
| mtd10: 00040000 00001000 "qspi.env" | |
| mtd11: 00040000 00001000 "qspi.env.backup" | |
| mtd12: 037c0000 00001000 "qspi.rootfs" | |
| mtd13: 00040000 00001000 "qspi.phypattern" | |
| root@j784s4-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/ | |
| /pnp /etc/resolv.conf && systemctl restart systemd-resolved | |
| root@j784s4-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc | |
| total 26920 | |
| -rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware | |
| -rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 bl32.bin | |
| -rw-r--r-- 1 root root 4105416 Mar 9 2018 bl32.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 cnm | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 intel | |
| -rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode | |
| -rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode | |
| -rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode | |
| -rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode | |
| -rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode | |
| -rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode | |
| -rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode | |
| -rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j784s4-c71_0-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_1_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j784s4-c71_0-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_1_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j784s4-c71_1-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_2_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j784s4-c71_1-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_2_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j784s4-c71_2-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_3_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j784s4-c71_2-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_3_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 66 Mar 9 2018 j784s4-c71_3-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_4_release_strip.xe71 | |
| lrwxrwxrwx 1 root root 73 Mar 9 2018 j784s4-c71_3-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_c7x_4_release_strip.xe71.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu2_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu2_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu2_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu2_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu3_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu3_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu3_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu3_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f2_0-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu4_0_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f2_0-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu4_0_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-main-r5f2_1-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu4_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-main-r5f2_1-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu4_1_release_strip.xer5f.signed | |
| lrwxrwxrwx 1 root root 68 Mar 9 2018 j784s4-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu1_1_release_strip.xer5f | |
| lrwxrwxrwx 1 root root 75 Mar 9 2018 j784s4-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j784s4/ipc_echo_test_mcu1_1_release_strip.xer5f.signed | |
| -rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db | |
| -rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s | |
| -rw-r--r-- 1 root root 151552 Mar 9 2018 rgx.fw.36.53.104.796 | |
| -rw-r--r-- 1 root root 383136 Mar 9 2018 rgx.sh.36.53.104.796 | |
| -rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin | |
| -rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin | |
| -rw-r--r-- 1 root root 432248 Mar 9 2018 tee-pager_v2.bin | |
| -rw-r--r-- 1 root root 432276 Mar 9 2018 tee.bin | |
| -rw-r--r-- 1 root root 4105416 Mar 9 2018 tee.elf | |
| drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth | |
| drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc | |
| lrwxrwxrwx 1 root root 39 Mar 9 2018 wave521c_codec_fw.bin -> /lib/firmware/cnm/wave521c_codec_fw.bin | |
| ls: cannot access '/lib/firmware/ipc': No such file or directory | |
| root@j784s4-evm:~# cat /proc/diskstats | |
| 7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 | |
| 31 0 mtdblock0 22 0 176 13 0 0 0 0 0 24 13 0 0 0 0 0 0 | |
| 31 1 mtdblock1 56 0 448 15 0 0 0 0 0 24 15 0 0 0 0 0 0 | |
| 31 2 mtdblock2 58 0 464 35 0 0 0 0 0 44 35 0 0 0 0 0 0 | |
| 31 3 mtdblock3 20 0 160 5 0 0 0 0 0 16 5 0 0 0 0 0 0 | |
| 31 4 mtdblock4 20 0 160 14 0 0 0 0 0 24 14 0 0 0 0 0 0 | |
| 31 5 mtdblock5 52 0 416 27 0 0 0 0 0 36 27 0 0 0 0 0 0 | |
| 31 6 mtdblock6 20 0 160 13 0 0 0 0 0 20 13 0 0 0 0 0 0 | |
| 31 7 mtdblock7 22 0 176 23 0 0 0 0 0 32 23 0 0 0 0 0 0 | |
| 31 8 mtdblock8 56 0 448 53 0 0 0 0 0 64 53 0 0 0 0 0 0 | |
| 31 9 mtdblock9 58 0 464 61 0 0 0 0 0 68 61 0 0 0 0 0 0 | |
| 179 0 mmcblk0 792 13 51505 424 2 0 8 1 0 308 425 0 0 0 0 1 0 | |
| 179 1 mmcblk0p1 246 0 16716 123 0 0 0 0 0 144 123 0 0 0 0 0 0 | |
| 179 2 mmcblk0p2 253 7 16723 137 0 0 0 0 0 156 137 0 0 0 0 0 0 | |
| 179 3 mmcblk0p3 254 6 16858 151 2 0 8 1 0 164 152 0 0 0 0 0 0 | |
| 31 10 mtdblock10 20 0 160 17 0 0 0 0 0 28 17 0 0 0 0 0 0 | |
| 31 11 mtdblock11 20 0 160 10 0 0 0 0 0 16 10 0 0 0 0 0 0 | |
| 179 32 mmcblk0boot0 68 0 1344 10 0 0 0 0 0 20 10 0 0 0 0 0 0 | |
| 31 12 mtdblock12 71 0 1344 203 0 0 0 0 0 172 203 0 0 0 0 0 0 | |
| 179 64 mmcblk0boot1 68 0 1344 20 0 0 0 0 0 28 20 0 0 0 0 0 0 | |
| 31 13 mtdblock13 20 0 160 17 0 0 0 0 0 24 17 0 0 0 0 0 0 | |
| 179 96 mmcblk1 796 48 51861 4629 2 0 16 4 0 1524 4633 0 0 0 0 0 0 | |
| 179 97 mmcblk1p1 265 0 16673 1420 0 0 0 0 0 1116 1420 0 0 0 0 0 0 | |
| 179 98 mmcblk1p2 246 41 17170 1668 1 0 8 1 0 1208 1669 0 0 0 0 0 0 | |
| 179 99 mmcblk1p3 247 7 16818 1460 1 0 8 3 0 1104 1463 0 0 0 0 0 0 | |
| root@j784s4-evm:~# cat /proc/interrupts | |
| CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 | |
| 11: 1892 1970 2144 1777 2755 1999 1715 2301 GICv3 30 Level arch_timer | |
| 14: 0 0 0 0 0 0 0 0 GICv3 23 Level arm-pmu | |
| 15: 1246 0 0 0 0 0 0 0 GICv3 69 Level 32c00000.mailbox thr_011 | |
| 36: 84 0 0 0 0 0 0 0 GICv3 928 Level 42120000.i2c | |
| 37: 36 0 0 0 0 0 0 0 GICv3 232 Level 2000000.i2c | |
| 38: 13 0 0 0 0 0 0 0 GICv3 236 Level 2040000.i2c | |
| 39: 50500 0 0 0 0 0 0 0 MSI-INTA 21495904 Level 46000000.ethernet-tx0 | |
| 41: 79748 0 0 0 0 0 0 0 MSI-INTA 21495906 Level 46000000.ethernet | |
| 59: 1991 0 0 0 0 0 0 0 MSI-INTA 20644718 Level 31150000.dma-controller chan0 | |
| 60: 2915 0 0 0 0 0 0 0 MSI-INTA 20644719 Level 31150000.dma-controller chan1 | |
| 187: 0 0 0 0 0 0 0 0 GICv3 878 Level 40a00000.serial | |
| 188: 714 0 0 0 0 0 0 0 GICv3 280 Level 2880000.serial | |
| 189: 2 0 0 0 0 0 0 0 GICv3 872 Level 47040000.spi | |
| 190: 0 0 0 0 0 0 0 0 GICv3 873 Level 47050000.spi | |
| 192: 1121 0 0 0 0 0 0 0 GICv3 35 Level mmc0 | |
| 237: 0 0 0 0 0 0 0 0 GPIO 39 Edge -davinci_gpio tps6594-0-0x48 | |
| 535: 1630 0 0 0 0 0 0 0 GICv3 36 Level mmc1 | |
| IPI0: 1299 898 1085 1230 928 991 942 564 Rescheduling interrupts | |
| IPI1: 4741 22774 22502 21284 20938 22337 22820 22524 Function call interrupts | |
| IPI2: 0 0 0 0 0 0 0 0 CPU stop interrupts | |
| IPI3: 0 0 0 0 0 0 0 0 CPU stop (for crash dump) interrupts | |
| IPI4: 0 0 0 0 0 0 0 0 Timer broadcast interrupts | |
| IPI5: 0 0 0 0 0 0 0 0 IRQ work interrupts | |
| Err: 0 | |
| root@j784s4-evm:~# cat /proc/softirqs | |
| CPU0 CPU1 CPU2 CPU3 CPU4 CPU5 CPU6 CPU7 | |
| HI: 0 0 0 0 0 0 0 0 | |
| TIMER: 583 472 521 369 421 346 389 355 | |
| NET_TX: 61 0 1 0 0 1 1 0 | |
| NET_RX: 47319 0 15 4 0 2 34 16 | |
| BLOCK: 918 0 0 0 0 0 0 0 | |
| IRQ_POLL: 0 0 0 0 0 0 0 0 | |
| TASKLET: 7270 0 0 0 1 0 0 1 | |
| SCHED: 961 767 767 713 710 631 627 684 | |
| HRTIMER: 0 0 0 0 0 0 0 0 | |
| RCU: 1316 1967 1982 1761 1935 1918 1914 1976 | |
| root@j784s4-evm:~# ls -lR /run/media/mmcblk0p1 | |
| /run/media/mmcblk0p1: | |
| total 0 | |
| root@j784s4-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $? | |
| 1 | |
| root@j784s4-evm:~# opkg list-installed | grep ti-test; echo $? | |
| ti-test - 1.0-r0.119 | |
| ti-test-extras - 1.0-r0.119 | |
| 0 | |
| root@j784s4-evm:~# depmod -a | |
| depmod: ERROR: could not open directory /lib/modules/6.7.0-rc1-next-20231116-00004-g3e504d2927ed: No such file or directory | |
| depmod: FATAL: could not search modules: No such file or directory | |
| root@j784s4-evm:~# lsmod | |
| Module Size Used by | |
| root@j784s4-evm:~# echo 'hello world' | |
| hello world | |
| root@j784s4-evm:~# |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment