Skip to content

Instantly share code, notes, and snippets.

@nehamalcom

nehamalcom/j7200-evm

Last active April 12, 2024 05:30
Show Gist options
  • Save nehamalcom/5dc94ab60f57df5d515d0a6d0da6e0d1 to your computer and use it in GitHub Desktop.
Save nehamalcom/5dc94ab60f57df5d515d0a6d0da6e0d1 to your computer and use it in GitHub Desktop.
Download ZIP
arm64: dts: ti: k3-j7*: v2: Add missing ESM and watchdog nodes
Raw
j7200-evm
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Trying to boot from UART
CWarning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1031931 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty
NOTICE: BL31: Built : 16:09:05, Feb 9 2024
I/TC:
I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Detected: J7X-BASE-CPB rev E3
Detected: J7X-VSC8514-ETH rev E2
Trying to boot from UART
Ccertificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1186635 bytes
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SoC: J7200 SR2.0 GP
Model: Texas Instruments K3 J7200 SoC
Board: J7200X-PM2-SOM rev E8
DRAM: 2 GiB (effective 4 GiB)
Core: 85 devices, 31 uclasses, devicetree: separate
Flash: 64 MiB
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev E3
Detected: J7X-VSC8514-ETH rev E2
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=>
=>
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
=> setenv bootcmd ''
=> setenv autoload 'no'
=> setenv serverip '192.168.0.1'
=> setenv _initramfs -
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j7200
board_rev=E8
board_serial=0071
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x800 mmcpart 1; tispl.bin.raw raw 0x800 0x1000 mmcpart 1; u-boot.img.raw raw 0x1800 0x2000 mmcpart 1; u-env.raw raw 0x3800 0x100 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x100000; tispl.bin raw 0x100000 0x200000; u-boot.img raw 0x300000 0x400000; u-boot-env raw 0x700000 0x020000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
do_main_cpsw0_qsgmii_phyinit=1
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
eth1addr=70:ff:76:1d:9b:3e
eth2addr=70:ff:76:1d:9b:3f
eth3addr=70:ff:76:1d:9b:40
eth4addr=70:ff:76:1d:9b:41
ethaddr=34:08:e1:59:e3:d5
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde9feb0
fdtoverlay_addr_r=0x89000000
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7200-mcu-r5f0_1-fw 2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000071
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 10782/131067 bytes
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
=> setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=> setenv serverip '192.168.0.1'
=> setenv autoload 'no'
=> dhcp
k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235
k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 192.168.0.88 (1015 ms)
=> setenv dorprocboot '1'
=> run boot_rprocs
k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
73912 bytes read in 12 ms (5.9 MiB/s)
Load Remote Processor 1 with data@addr=0x82000000 73912 bytes: Success!
73912 bytes read in 12 ms (5.9 MiB/s)
Load Remote Processor 2 with data@addr=0x82000000 73912 bytes: Success!
73912 bytes read in 12 ms (5.9 MiB/s)
Load Remote Processor 3 with data@addr=0x82000000 73912 bytes: Success!
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j7200
board_rev=E8
board_serial=0071
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x800 mmcpart 1; tispl.bin.raw raw 0x800 0x1000 mmcpart 1; u-boot.img.raw raw 0x1800 0x2000 mmcpart 1; u-env.raw raw 0x3800 0x100 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x100000; tispl.bin raw 0x100000 0x200000; u-boot.img raw 0x300000 0x400000; u-boot-env raw 0x700000 0x020000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
dnsip=192.0.2.2
do_main_cpsw0_qsgmii_phyinit=1
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
eth1addr=70:ff:76:1d:9b:3e
eth2addr=70:ff:76:1d:9b:3f
eth3addr=70:ff:76:1d:9b:40
eth4addr=70:ff:76:1d:9b:41
ethact=ethernet@46000000port@1
ethaddr=34:08:e1:59:e3:d5
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde9feb0
fdtoverlay_addr_r=0x89000000
fileaddr=82000000
filesize=120b8
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
gatewayip=192.168.0.1
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
ipaddr=192.168.0.88
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
netmask=255.255.255.0
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7200-mcu-r5f0_1-fw 2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000071
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 10945/131067 bytes
=> tftp ${loadaddr} 192.168.0.1:vatf_j7200-evm/fa29f474bc52a4d3c9cebc84f5e9b6a8
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.88
Filename 'vatf_j7200-evm/fa29f474bc52a4d3c9cebc84f5e9b6a8'.
Load address: 0x82000000
Loading: *################################################## 42.3 MiB
13.8 MiB/s
done
Bytes transferred = 44362240 (2a4ea00 hex)
=> tftp ${fdt_addr_r} 192.168.0.1:vatf_j7200-evm/f168a00de9e662519d0b3b2e7be04c35
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.88
Filename 'vatf_j7200-evm/f168a00de9e662519d0b3b2e7be04c35'.
Load address: 0x88000000
Loading: *################################################## 78.4 KiB
8.5 MiB/s
done
Bytes transferred = 80332 (139cc hex)
=> fdt address ${fdt_addr_r}
Working FDT set to 88000000
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=> setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/34b14060ab7d4ff5071eae53ed9fba8f,nolock,v3,tcp,rsize=4096,wsize=4096 '
=> printenv bootcmd
bootcmd=
=> setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000004000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed0000
reloc off = 0x000000007f6d0000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 34:08:e1:59:e3:d5
IP addr = 192.168.0.88
fdt_blob = 0x00000000fde9feb0
new_fdt = 0x00000000fde9feb0
fdt_size = 0x000000000000ff00
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x3
reserved[0] [0x9e800000-0xa47fffff], 0x06000000 bytes flags: 4
reserved[1] [0xfce90000-0xffffffff], 0x03170000 bytes flags: 0
reserved[2] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde9fea0
sp start = 0x00000000fde9fea0
Early malloc usage: 2d18 / 8000
=>
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000004000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed0000
reloc off = 0x000000007f6d0000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 34:08:e1:59:e3:d5
IP addr = 192.168.0.88
fdt_blob = 0x00000000fde9feb0
new_fdt = 0x00000000fde9feb0
fdt_size = 0x000000000000ff00
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x3
reserved[0] [0x9e800000-0xa47fffff], 0x06000000 bytes flags: 4
reserved[1] [0xfce90000-0xffffffff], 0x03170000 bytes flags: 0
reserved[2] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde9fea0
sp start = 0x00000000fde9fea0
Early malloc usage: 2d18 / 8000
=> ls mmc 0:1
=> ls mmc 1:1
EFI/
19376640 Image
533968 tiboot3.bin
533968 tiboot3-j7200-gp-evm.bin
536557 tiboot3-j7200-hs-evm.bin
536557 tiboot3-j7200-hs-fs-evm.bin
536557 tiboot3-j7200_sr2-hs-evm.bin
536557 tiboot3-j7200_sr2-hs-fs-evm.bin
1031931 tispl.bin
1186635 u-boot.img
574 uEnv.txt
4 ws-calibrate.rules
11 file(s), 1 dir(s)
=> ext4ls mmc 0:2 /lib/firmware
** Invalid partition 2 **
Couldn't find partition mmc 0:2
=> ext4ls mmc 1:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
482656 bl32.bin
4324344 bl32.elf
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode
<SYM> 67 j7200-main-r5f0_0-fw
<SYM> 74 j7200-main-r5f0_0-fw-sec
<SYM> 67 j7200-main-r5f0_1-fw
<SYM> 74 j7200-main-r5f0_1-fw-sec
<SYM> 67 j7200-mcu-r5f0_1-fw
<SYM> 74 j7200-mcu-r5f0_1-fw-sec
4728 regulatory.db
1182 regulatory.db.p7s
28 tee-header_v2.bin
0 tee-pageable_v2.bin
482656 tee-pager_v2.bin
482656 tee-raw.bin
482684 tee.bin
4324344 tee.elf
<DIR> 4096 ti-connectivity
<DIR> 4096 ti-eth
<DIR> 4096 ti-ipc
=> mmc rescan; echo $?
0
=> fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 5 ms (0 Bytes/s)
=> boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008ffe9000, end 000000008ffff9cb ... OK
Working FDT set to 8ffe9000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 6.9.0-rc1-next-20240326-00005-g70ecbd3cd9a1 (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #2 SMP PREEMPT Fri Apr 12 10:37:57 IST 2024
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Texas Instruments J7200 EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: legacy bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a47fffff (8192 KiB) nomap non-reusable ipc-memories@a4000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7d99c0-0x8ff7dbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a47fffff]
[ 0.000000] node 0: [mem 0x00000000a4800000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 24 pages/cpu s58792 r8192 d31320 u98304
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/34b14060ab7d4ff5071eae53ed9fba8f,nolock,v3,tcp,rsize=4096,wsize=4096
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 0
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[ 0.000000] Memory: 3871488K/4194304K available (16960K kernel code, 4794K rwdata, 11348K rodata, 10048K init, 748K bss, 290048K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880400000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.009142] Console: colour dummy device 80x25
[ 0.013731] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.024403] pid_max: default: 32768 minimum: 301
[ 0.029150] LSM: initializing lsm=capability
[ 0.033572] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.041150] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.050241] rcu: Hierarchical SRCU implementation.
[ 0.055159] rcu: Max phase no-delay instances is 1000.
[ 0.060773] Platform MSI: msi-controller@1820000 domain created
[ 0.066959] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.076287] fsl-mc MSI: msi-controller@1820000 domain created
[ 0.083292] EFI services will not be available.
[ 0.088034] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.101217] Detected PIPT I-cache on CPU1
[ 0.101269] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.101285] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000
[ 0.101321] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.101406] smp: Brought up 1 node, 2 CPUs
[ 0.130757] SMP: Total of 2 processors activated.
[ 0.135561] CPU: All CPU(s) started at EL2
[ 0.139764] CPU features: detected: 32-bit EL0 Support
[ 0.145014] CPU features: detected: 32-bit EL1 Support
[ 0.150263] CPU features: detected: CRC32 instructions
[ 0.155530] alternatives: applying system-wide alternatives
[ 0.162515] devtmpfs: initialized
[ 0.171201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.181203] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.188729] pinctrl core: initialized pinctrl subsystem
[ 0.195244] DMI not present or invalid.
[ 0.201091] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.207628] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.214948] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.222997] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.231130] audit: initializing netlink subsys (disabled)
[ 0.236760] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[ 0.237570] thermal_sys: Registered thermal governor 'step_wise'
[ 0.244691] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.250873] cpuidle: using governor menu
[ 0.261669] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.268639] ASID allocator initialised with 65536 entries
[ 0.275315] Serial: AMBA PL011 UART driver
[ 0.297742] Modules: 21728 pages in range for non-PLT usage
[ 0.297750] Modules: 513248 pages in range for PLT usage
[ 0.303933] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.316308] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.322711] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.329646] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.336048] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.342982] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.349385] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.356319] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.362974] Demotion targets for Node 0: null
[ 0.368257] ACPI: Interpreter disabled.
[ 0.373675] k3-chipinfo 43000014.chipid: Family:J7200 rev:SR2.0 JTAGID[0x1bb6d02f] Detected
[ 0.382892] iommu: Default domain type: Translated
[ 0.387801] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.394292] SCSI subsystem initialized
[ 0.398326] usbcore: registered new interface driver usbfs
[ 0.403951] usbcore: registered new interface driver hub
[ 0.409392] usbcore: registered new device driver usb
[ 0.415302] pps_core: LinuxPPS API ver. 1 registered
[ 0.420379] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.429719] PTP clock support registered
[ 0.433827] EDAC MC: Ver: 3.0.0
[ 0.437484] scmi_core: SCMI protocol bus registered
[ 0.443246] FPGA manager framework
[ 0.446775] Advanced Linux Sound Architecture Driver Initialized.
[ 0.453544] vgaarb: loaded
[ 0.456601] clocksource: Switched to clocksource arch_sys_counter
[ 0.462983] VFS: Disk quotas dquot_6.6.0
[ 0.467018] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.474148] pnp: PnP ACPI: disabled
[ 0.481057] NET: Registered PF_INET protocol family
[ 0.486319] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.495349] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.504124] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.512053] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.520272] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.529018] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.535872] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.542801] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.550242] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.556358] RPC: Registered named UNIX socket transport module.
[ 0.562423] RPC: Registered udp transport module.
[ 0.567227] RPC: Registered tcp transport module.
[ 0.572031] RPC: Registered tcp-with-tls transport module.
[ 0.577634] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.584222] PCI: CLS 0 bytes, default 64
[ 0.590354] kvm [1]: nv: 477 coarse grained trap handlers
[ 0.596077] kvm [1]: IPA Size Limit: 44 bits
[ 0.601405] kvm [1]: vgic-v2@6f020000
[ 0.605165] kvm [1]: GIC system register CPU interface enabled
[ 0.611142] kvm [1]: vgic interrupt IRQ9
[ 0.615163] kvm [1]: Hyp mode (nVHE) initialized successfully
[ 0.621833] Initialise system trusted keyrings
[ 0.626542] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.633309] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.639434] NFS: Registering the id_resolver key type
[ 0.644613] Key type id_resolver registered
[ 0.648888] Key type id_legacy registered
[ 0.652991] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.659841] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.667500] 9p: Installing v9fs 9p2000 file system support
[ 0.694276] Key type asymmetric registered
[ 0.698462] Asymmetric key parser 'x509' registered
[ 0.703481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.711047] io scheduler mq-deadline registered
[ 0.715674] io scheduler kyber registered
[ 0.719788] io scheduler bfq registered
[ 0.729325] pinctrl-single 4301c000.pinctrl: 13 pins, size 52
[ 0.735329] pinctrl-single 4301c038.pinctrl: 2 pins, size 8
[ 0.741124] pinctrl-single 4301c068.pinctrl: 59 pins, size 236
[ 0.747342] pinctrl-single 4301c174.pinctrl: 8 pins, size 32
[ 0.753274] pinctrl-single 104200.pinctrl: 20 pins, size 80
[ 0.759033] pinctrl-single 104280.pinctrl: 8 pins, size 32
[ 0.764735] pinctrl-single 11c000.pinctrl: 67 pins, size 268
[ 0.770806] pinctrl-single 11c11c.pinctrl: 3 pins, size 12
[ 0.801565] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.810453] msm_serial: driver initialized
[ 0.814916] SuperH (H)SCI(F) driver initialized
[ 0.819667] STM32 USART driver initialized
[ 0.828278] loop: module loaded
[ 0.832344] megasas: 07.727.03.00-rc1
[ 0.840397] tun: Universal TUN/TAP device driver, 1.6
[ 0.846293] thunder_xcv, ver 1.0
[ 0.849621] thunder_bgx, ver 1.0
[ 0.852942] nicpf, ver 1.0
[ 0.856540] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.863935] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.869387] hclge is initializing
[ 0.872794] e1000: Intel(R) PRO/1000 Network Driver
[ 0.877777] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.883658] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.888729] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.894787] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.900302] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.906004] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.912408] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.918705] sky2: driver version 1.30
[ 0.923413] VFIO - User Level meta-driver version: 0.3
[ 0.930877] usbcore: registered new interface driver usb-storage
[ 0.939217] i2c_dev: i2c /dev entries driver
[ 0.948975] sdhci: Secure Digital Host Controller Interface driver
[ 0.955302] sdhci: Copyright(c) Pierre Ossman
[ 0.960406] Synopsys Designware Multimedia Card Interface Driver
[ 0.967271] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.974535] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.981242] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 0.988666] usbcore: registered new interface driver usbhid
[ 0.994368] usbhid: USB HID core driver
[ 1.000867] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.010776] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.015354] optee: revision 4.1 (012cdca4)
[ 1.031862] optee: dynamic shared memory is enabled
[ 1.041518] random: crng init done
[ 1.045064] optee: initialized driver
[ 1.051733] NET: Registered PF_PACKET protocol family
[ 1.056968] 9pnet: Installing 9P2000 support
[ 1.061371] Key type dns_resolver registered
[ 1.070284] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 1.078628] registered taskstats version 1
[ 1.082891] Loading compiled-in X.509 certificates
[ 1.105174] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
[ 1.117304] debugfs: Directory 'pd:35' with parent 'pm_genpd' already present!
[ 1.126425] debugfs: Directory 'pd:49' with parent 'pm_genpd' already present!
[ 1.225818] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.232508] pca953x 1-0021: supply vcc not found, using dummy regulator
[ 1.239356] pca953x 1-0021: using no AI
[ 1.265080] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 1.271901] pca953x 1-0020: using no AI
[ 1.276554] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.283378] pca953x 1-0022: using AI
[ 1.287749] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.294244] pca953x 2-0020: supply vcc not found, using dummy regulator
[ 1.301087] pca953x 2-0020: using no AI
[ 1.328996] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.334979] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[ 1.343698] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[ 1.353186] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[ 1.361944] ti-sci-inta 33d00000.msi-controller: Interrupt Aggregator domain 209 created
[ 1.373406] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,32] sci-dev-id:235
[ 1.383304] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 1.390072] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 1.401143] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[120,200] sci-dev-id:211
[ 1.411328] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 1.418094] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66349100, num_proxies:64
[ 1.426990] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 271, base_baud = 6000000) is a 8250
[ 1.437571] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 272, base_baud = 3000000) is a 8250
[ 1.446436] printk: legacy console [ttyS2] enabled
[ 1.446436] printk: legacy console [ttyS2] enabled
[ 1.456115] printk: legacy bootconsole [ns16550a0] disabled
[ 1.456115] printk: legacy bootconsole [ns16550a0] disabled
[ 1.470040] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 273, base_baud = 3000000) is a 8250
[ 1.480124] 2830000.serial: ttyS0 at MMIO 0x2830000 (irq = 274, base_baud = 3000000) is a 8250
[ 1.490671] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.536608] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.546486] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.554766] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.567625] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.574835] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.585062] mmc0: CQHCI version 5.10
[ 1.597500] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.608335] ti-udma 31150000.dma-controller: Channels: 50 (tchan: 25, rchan: 25, gp-rflow: 8)
[ 1.619792] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.628642] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 1.664607] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.674494] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.682779] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA02102, cpsw version 0x6BA82102 Ports: 2 quirks:00000000
[ 1.695642] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.702853] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.714598] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 1.724786] mmc1: CQHCI version 5.10
[ 1.736831] mmc0: Command Queue Engine enabled
[ 1.741285] mmc0: new HS400 MMC card at address 0001
[ 1.746558] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 1.753591] mmcblk0: p1
[ 1.756388] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 1.762018] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 1.767579] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (511:0)
[ 1.768649] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 1.790305] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 1.799775] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 1.832870] mmc1: new ultra high speed SDR104 SDHC card at address aaaa
[ 1.839975] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 1.848720] mmcblk1: p1 p2 p3
[ 5.886721] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 5.908603] Sending DHCP requests ., OK
[ 5.928439] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.88
[ 5.936090] IP-Config: Complete:
[ 5.939309] device=eth0, hwaddr=34:08:e1:59:e3:d5, ipaddr=192.168.0.88, mask=255.255.255.0, gw=192.168.0.1
[ 5.949381] host=192.168.0.88, domain=ti.com, nis-domain=(none)
[ 5.955720] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 5.955723] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 5.968428] clk: Disabling unused clocks
[ 5.985891] PM: genpd: Disabling unused power domains
[ 5.990996] ALSA device list:
[ 5.994004] No soundcards found.
[ 6.034392] VFS: Mounted root (nfs filesystem) on device 0:22.
[ 6.040542] devtmpfs: mounted
[ 6.052106] Freeing unused kernel memory: 10048K
[ 6.056909] Run /sbin/init as init process
[ 6.196199] systemd[1]: System time before build time, advancing clock.
[ 6.227992] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 6.259443] systemd[1]: Detected architecture arm64.
Welcome to [1mArago 2023.10[0m!
[ 6.325853] systemd[1]: Hostname set to <j7200-evm>.
[ 6.426503] systemd-sysv-generator[85]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.453674] systemd[76]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 6.648438] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.657336] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.691158] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 6.749963] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 6.816867] systemd[1]: Queued start job for default target Graphical Interface.
[ 6.856806] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 6.877997] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 6.901936] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 6.925722] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 6.948825] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m.
[ 6.972751] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m.
[ 6.996789] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 7.012672] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 7.032664] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 7.048669] systemd[1]: Reached target Swaps.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[ 7.083724] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 7.108753] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 7.132702] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 7.152875] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 7.177420] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 7.197341] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 7.220980] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 7.237420] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 7.262043] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 7.284888] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 7.305284] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 7.348890] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 7.367282] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 7.391269] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 7.416913] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 7.448912] systemd[1]: Mounting Temporary Directory /tmp...
Mounting [0;1;39mTemporary Directory /tmp[0m...
[ 7.468939] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.9.0-rc1-next-20240326-00005-g70ecbd3cd9a1/modules.devname).
[ 7.489642] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 7.507141] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 7.531170] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 7.552990] systemd[1]: Starting RPC Bind...
Starting [0;1;39mRPC Bind[0m...
[ 7.569115] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 7.605477] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 7.627388] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 7.656259] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network ts from Kernel command line[0m...
[ 7.701082] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 7.729253] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 7.748858] systemd[1]: Started RPC Bind.
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m.
[ 7.765267] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m.
See 'systemctl status systemd-modules-load.service' for details.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mApply Kernel Variables[0m...[ 8.057810] systemd-journald[96]: Received client request to flush runtime journal.
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/media/ram[0m...
Mounting [0;1;39m/var/volatile[0m...
[ 8.235055] audit: type=1334 audit(1651167747.036:2): prog-id=5 op=LOAD
[ 8.242120] audit: type=1334 audit(1651167747.044:3): prog-id=6 op=LOAD
Starting [0;1;39mRule-based Managefor Device Events and Files[0m...
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m.
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m.
Starting [0;1;39mLoad/Save Random Seed[0m...
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[ 8.757164] systemd-journald[96]: Oldest entry in /run/log/journal/d8286d6938ec48259dbb89816b50a233/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 8.775109] systemd-journald[96]: /run/log/journal/d8286d6938ec48259dbb89816b50a233/system.journal: Journal header limits reached or header out-of-date, rotating.
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m.
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m.
[[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m.
[[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
Starting [0;1;39mDocker Socket for the API[0m...
[[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m.
Starting [0;1;39mWeston socket[0m...
Starting [0;1;39mD-Bus System Message Bus[0m...
Starting [0;1;39mReboot and dump vmcore via kexec[0m...
[[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m.
[[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m.
[[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m.
[[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m.
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m.
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m.
[[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m.
[[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m.
Starting [0;1;39mPrint notice about GPLv3 packages[0m...
Starting [0;1;39mIPv6 Packet Filtering Framework[0m...
Starting [0;1;39mIPv4 Packet Filtering Framework[0m...
[[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m.
Starting [0;1;39mLighttpd Daemon[0m...
[[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m.
[ 9.322492] audit: type=1334 audit(1712898955.327:4): prog-id=7 op=LOAD
Starting [0;1;39mUser Login Management[0m...
[ 9.339077] audit: type=1334 audit(1712898955.327:5): prog-id=8 op=LOAD
[[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m.
Starting [0;1;39mTelnet Server[0m...
Starting [0;1;39mRotate log files[0m...
[[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m.
[[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m.
[[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m.
Starting [0;1;39mNetwork Configuration[0m...
[[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m.
[[0;32m OK [0m] Finished [0;1;39mRotate log files[0m.
[[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m.
Starting [0;1;39mNetwork Name Resolution[0m...
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m.
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m...
Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m...
Starting [0;1;39mcontainerd container runtime[0m...
[[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m.
[[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m.
Starting [0;1;39mPermit User Sessions[0m...
[[0;32m OK [0m] Finished [0;1;39mEnable and configure wl18xx bluetooth stack[0m.
[[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m.
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m.
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m.
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m.
Starting [0;1;39mSynchronize System and HW clocks[0m...
Starting [0;1;39mWeston, a Waylandositor, as a system service[0m...
[[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m.
See 'systemctl status sync-clocks.service' for details.
[ 10.725147] audit: type=1334 audit(1712898956.727:6): prog-id=9 op=LOAD
[ 10.742208] audit: type=1334 audit(1712898956.739:7): prog-id=10 op=LOAD
Starting [0;1;39mUser Database Manager[0m...
[[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m.
[[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m.
Starting [0;1;39mUser Runtime Directory /run/user/1000[0m...
[[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m.
Starting [0;1;39mUser Manager for UID 1000[0m...
[ 11.372889] audit: type=1006 audit(1712898957.375:8): pid=334 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 11.391323] audit: type=1300 audit(1712898957.375:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffc40dc158 a2=4 a3=0 items=0 ppid=1 pid=334 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 11.427382] audit: type=1327 audit(1712898957.375:8): proctitle="(systemd)"
[[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m.
[[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m.
[ 11.911476] audit: type=1006 audit(1712898957.915:9): pid=286 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m.
See 'systemctl status weston.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m.
[[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m.
Mounting [0;1;39m/run/media/mmcblk1p3[0m...
Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m.
Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m.
Mounting [0;1;39m/run/media/root-mmcblk1p2[0m...
[ 12.938031] EXT4-fs (mmcblk1p3): mounting ext2 file system using the ext4 subsystem
[ 12.958615] EXT4-fs (mmcblk1p3): mounted filesystem 5bbb6ff9-8e2d-439c-b6ad-5045e43f7988 r/w without journal. Quota mode: none.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m.
[ 12.995999] EXT4-fs (mmcblk1p2): mounted filesystem 0776c79c-6dfc-490d-9d16-74bb8e1598eb r/w with ordered data mode. Quota mode: none.
[ 13.010895] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m.
***************************************************************
***************************************************************
NOTICE: This file system contains the following GPL-3.0 packages:
adwaita-icon-theme-symbolic
autoconf
bash
bc
binutils
cifs-utils
coreutils-stdbuf
coreutils
cpio
cpp-symlinks
cpp
dosfstools
elfutils
g++-symlinks
g++
gawk
gcc-symlinks
gcc
gdb
gdbserver
gettext
glmark2
gnu-config
grub-common
grub-editenv
grub-efi
gzip
less
libasm1
libatomic-dev
libatomic1
libbfd
libdebuginfod1
libdw1
libelf1
libgcc-s-dev
libgcc1
libgdbm-compat4
libgdbm6
libgettextlib
libgettextsrc
libgmp10
libidn2-0
libmpc3
libmpfr6
libopcodes
libqt5charts-examples
libqt5charts-plugins
libqt5charts-qmlplugins
libqt5charts5
libqt5sensors-plugins
libqt5sensors-qmlplugins
libqt5sensors5
libqt5serialport-examples
libqt5serialport-plugins
libqt5serialport-qmlplugins
libqt5serialport5
libqt5svg-examples
libqt5svg-plugins
libqt5svg-qmlplugins
libqt5svg5
libqt5virtualkeyboard-plugins
libqt5virtualkeyboard-qmlplugins
libqt5virtualkeyboard5
libqt5webchannel-plugins
libqt5webchannel-qmlplugins
libqt5webchannel5
libreadline8
libstdc++-dev
libstdc++6
libunistring2
m4
make
nettle
parted
piglit
qt3d-plugins
qt3d-qmlplugins
qt3d
qtbase-examples
qtbase-plugins
qtbase-qmlplugins
qtbase
qtconnectivity-plugins
qtconnectivity-qmlplugins
qtconnectivity
qtdeclarative-plugins
qtdeclarative-qmlplugins
qtdeclarative-tools
qtdeclarative
qtgraphicaleffects-qmlplugins
qtlocation-examples
qtlocation-plugins
qtlocation-qmlplugins
qtlocation
qtmultimedia-examples
qtmultimedia-plugins
qtmultimedia-qmlplugins
qtmultimedia
qtquics-qmlplugins.control
qtquics2-plugins.control
qtquics2-qmlplugins.control
qtquics2.control
qtscript-examples
qtscript-plugins
qtscript-qmlplugins
qtscript
qtwayland-examples
qtwayland-plugins
qtwayland-qmlplugins
qtwayland
tar
which
If you do not wish to distribute GPL-3.0 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove <package>
Where <package> is the name printed in the list above
NOTE: If the package is a dependency of another package you
will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
[[0;32m OK [0m] Finished [0;1;39mPrint notice about GPLv3 packages[0m.
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m.
[[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m.
Starting [0;1;39mRecord Runlevel Change in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project j7200-evm -
Arago 2023.10 j7200-evm -
j7200-evm login: root
[ 15.817829] kauditd_printk_skb: 2 callbacks suppressed
[ 15.817837] audit: type=1006 audit(1712898961.823:10): pid=894 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[ 15.835381] audit: type=1300 audit(1712898961.823:10): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffc40dc158 a2=1 a3=0 items=0 ppid=1 pid=894 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 15.860795] audit: type=1327 audit(1712898961.823:10): proctitle="(systemd)"
[ 15.869474] audit: type=1334 audit(1712898961.875:11): prog-id=11 op=LOAD
[ 15.876782] audit: type=1300 audit(1712898961.875:11): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffecbfde00 a2=78 a3=0 items=0 ppid=1 pid=894 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 15.902574] audit: type=1327 audit(1712898961.875:11): proctitle="(systemd)"
[ 15.910014] audit: type=1334 audit(1712898961.875:12): prog-id=11 op=UNLOAD
[ 15.917367] audit: type=1300 audit(1712898961.875:12): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffffaff1a020 a2=0 a3=ffffaff1a7e0 items=0 ppid=1 pid=894 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 15.943843] audit: type=1327 audit(1712898961.875:12): proctitle="(systemd)"
[ 15.951104] audit: type=1334 audit(1712898961.875:13): prog-id=12 op=LOAD
7[r[999;999H[6nroot@j7200-evm:~# uname -a
Linux j7200-evm 6.9.0-rc1-next-20240326-00005-g70ecbd3cd9a1 #2 SMP PREEMPT Fri Apr 12 10:37:57 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j7200-evm:~# cat /proc/cmdline
console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j7200-evm/autofs/34b14060ab7d4ff5071eae53ed9fba8f,nolock,v3,tcp,rsize=4096,wsize=4096
root@j7200-evm:~# uname -a
Linux j7200-evm 6.9.0-rc1-next-20240326-00005-g70ecbd3cd9a1 #2 SMP PREEMPT Fri Apr 12 10:37:57 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j7200-evm:~# cat /proc/mtd
dev: size erasesize name
root@j7200-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p
pnp /etc/resolv.conf && systemctl restart systemd-resolved
root@j7200-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc
total 27364
-rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware
-rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware
-rw-r--r-- 1 root root 482656 Mar 9 2018 bl32.bin
-rw-r--r-- 1 root root 4324344 Mar 9 2018 bl32.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 intel
-rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode
-rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode
-rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode
-rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode
-rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode
-rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode
-rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode
-rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode
lrwxrwxrwx 1 root root 67 Mar 23 02:28 j7200-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_0_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_0_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 23 02:28 j7200-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu2_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 23 02:28 j7200-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu1_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7200-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j7200/ipc_echo_test_mcu1_1_release_strip.xer5f.signed
-rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db
-rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s
-rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin
-rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-pager_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-raw.bin
-rw-r--r-- 1 root root 482684 Mar 9 2018 tee.bin
-rw-r--r-- 1 root root 4324344 Mar 9 2018 tee.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc
ls: cannot access '/lib/firmware/ipc': No such file or directory
root@j7200-evm:~# cat /proc/diskstats
7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
179 0 mmcblk0 132 0 7599 71 0 0 0 0 0 184 71 0 0 0 0 0 0
179 1 mmcblk0p1 81 0 6351 44 0 0 0 0 0 108 44 0 0 0 0 0 0
179 32 mmcblk0boot0 68 0 1344 15 0 0 0 0 0 52 15 0 0 0 0 0 0
179 64 mmcblk0boot1 68 0 1344 12 0 0 0 0 0 24 12 0 0 0 0 0 0
179 96 mmcblk1 780 62 50405 1249 3 0 24 8 0 996 1257 0 0 0 0 0 0
179 97 mmcblk1p1 236 0 14593 433 0 0 0 0 0 544 433 0 0 0 0 0 0
179 98 mmcblk1p2 217 31 17210 377 1 0 8 1 0 532 379 0 0 0 0 0 0
179 99 mmcblk1p3 289 31 17402 398 2 0 16 7 0 568 405 0 0 0 0 0 0
root@j7200-evm:~# cat /proc/interrupts
CPU0 CPU1
9: 0 0 GICv3 25 Level vgic
11: 4277 3644 GICv3 30 Level arch_timer
12: 0 0 GICv3 27 Level kvm guest vtimer
14: 0 0 GICv3 23 Level arm-pmu
15: 2084 0 GICv3 69 Level 32c00000.mailbox thr_011
36: 0 0 GICv3 928 Level 42120000.i2c
37: 42 0 GICv3 232 Level 2000000.i2c
38: 6 0 GICv3 233 Level 2010000.i2c
39: 5 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0
40: 9 0 MSI-INTA 15401057 Level 46000000.ethernet-tx1
41: 0 0 MSI-INTA 15401058 Level 46000000.ethernet-tx2
42: 8 0 MSI-INTA 15401059 Level 46000000.ethernet-tx3
43: 42111 0 MSI-INTA 15401060 Level 46000000.ethernet-tx4
44: 0 0 MSI-INTA 15401061 Level 46000000.ethernet-tx5
45: 12 0 MSI-INTA 15401062 Level 46000000.ethernet-tx6
46: 13 0 MSI-INTA 15401063 Level 46000000.ethernet-tx7
48: 63686 0 MSI-INTA 15401065 Level 46000000.ethernet
271: 0 0 GICv3 878 Level 40a00000.serial
272: 618 0 GICv3 224 Level 2800000.serial
273: 0 0 GICv3 225 Level 2810000.serial
274: 0 0 GICv3 227 Level 2830000.serial
275: 400 0 GICv3 35 Level mmc0
518: 1664 0 GICv3 36 Level mmc1
IPI0: 3065 8281 Rescheduling interrupts
IPI1: 5912 9489 Function call interrupts
IPI2: 0 0 CPU stop interrupts
IPI3: 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 Timer broadcast interrupts
IPI5: 0 0 IRQ work interrupts
Err: 0
root@j7200-evm:~# cat /proc/softirqs
CPU0 CPU1
HI: 0 0
TIMER: 1507 1470
NET_TX: 19 1
NET_RX: 68961 29
BLOCK: 268 0
IRQ_POLL: 0 0
TASKLET: 2163 1
SCHED: 1948 1783
HRTIMER: 6 0
RCU: 6127 7014
root@j7200-evm:~# ls -lR /run/media/mmcblk0p1
ls: cannot access '/run/media/mmcblk0p1': No such file or directory
root@j7200-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $?
1
root@j7200-evm:~# opkg list-installed | grep ti-test; echo $?
ti-test - 1.0-r0.120
ti-test-extras - 1.0-r0.120
0
root@j7200-evm:~# lsmod
Module Size Used by
root@j7200-evm:~# depmod -a
depmod: ERROR: could not open directory /lib/modules/6.9.0-rc1-next-20240326-00005-g70ecbd3cd9a1: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
root@j7200-evm:~# lsmod
Module Size Used by
root@j7200-evm:~# echo 'hello world'
hello world
root@j7200-evm:~#
Raw
j721e-evm
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Trying to boot from UART
Cate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1091259 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty
NOTICE: BL31: Built : 16:09:05, Feb 9 2024
I/TC:
I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
hbmc-am654 hyperbus@47034000: Calibration Failed
Trying to boot from UART
Cicate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1328275 bytes
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SoC: J721E SR1.0 GP
Model: Texas Instruments K3 J721E SoC
Board: J721EX-PM2-SOM rev E7
DRAM: 2 GiB (effective 4 GiB)
Core: 124 devices, 36 uclasses, devicetree: separate
Flash: hbmc-am654 hyperbus@47034000: Calibration Failed
hbmc-am654 hyperbus@47034000: Calibration Failed
0 Bytes
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
cdns,sierra serdes@5000000: sierra probed
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
=> setenv bootcmd ''
=> setenv autoload 'no'
=> setenv serverip '192.168.0.1'
=> setenv _initramfs -
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e
board_rev=E7
board_serial=0330
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
eth1addr=70:ff:76:1d:8a:ec
eth2addr=70:ff:76:1d:8a:ed
eth3addr=70:ff:76:1d:8a:ee
eth4addr=70:ff:76:1d:8a:ef
eth5addr=70:ff:76:1d:93:f7
eth6addr=70:ff:76:1d:93:f8
eth7addr=70:ff:76:1d:93:f9
eth8addr=70:ff:76:1d:93:fa
eth9addr=70:ff:76:1d:93:fb
ethaddr=78:db:2f:e0:81:ed
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde98b90
fdtoverlay_addr_r=0x89000000
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000330
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 11285/131067 bytes
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
=> setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=> setenv serverip '192.168.0.1'
=> setenv autoload 'no'
=> dhcp
k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
BOOTP broadcast 1
DHCP client bound to address 192.168.0.30 (2 ms)
=> setenv dorprocboot '1'
=> run boot_rprocs
k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
88280 bytes read in 32 ms (2.6 MiB/s)
Load Remote Processor 1 with data@addr=0x82000000 88280 bytes: Success!
88280 bytes read in 33 ms (2.6 MiB/s)
Load Remote Processor 2 with data@addr=0x82000000 88280 bytes: Success!
88280 bytes read in 33 ms (2.6 MiB/s)
Load Remote Processor 3 with data@addr=0x82000000 88280 bytes: Success!
88280 bytes read in 33 ms (2.6 MiB/s)
Load Remote Processor 4 with data@addr=0x82000000 88280 bytes: Success!
88280 bytes read in 33 ms (2.6 MiB/s)
Load Remote Processor 5 with data@addr=0x82000000 88280 bytes: Success!
145860 bytes read in 33 ms (4.2 MiB/s)
Load Remote Processor 6 with data@addr=0x82000000 145860 bytes: Success!
145860 bytes read in 33 ms (4.2 MiB/s)
Load Remote Processor 7 with data@addr=0x82000000 145860 bytes: Success!
10489000 bytes read in 41 ms (244 MiB/s)
Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success!
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e
board_rev=E7
board_serial=0330
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
dnsip=192.0.2.2
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
eth1addr=70:ff:76:1d:8a:ec
eth2addr=70:ff:76:1d:8a:ed
eth3addr=70:ff:76:1d:8a:ee
eth4addr=70:ff:76:1d:8a:ef
eth5addr=70:ff:76:1d:93:f7
eth6addr=70:ff:76:1d:93:f8
eth7addr=70:ff:76:1d:93:f9
eth8addr=70:ff:76:1d:93:fa
eth9addr=70:ff:76:1d:93:fb
ethact=ethernet@46000000port@1
ethaddr=78:db:2f:e0:81:ed
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde98b90
fdtoverlay_addr_r=0x89000000
fileaddr=82000000
filesize=a00ca8
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
gatewayip=192.168.0.1
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
hostname=j721e-idk-gw
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
ipaddr=192.168.0.30
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
netmask=255.255.255.0
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000330
serverip=192.168.0.1
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 11471/131067 bytes
=> tftp ${loadaddr} 192.168.0.1:vatf_j721e-idk-gw/19f312ee7f91b0bb7337b749df7aa93a
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'vatf_j721e-idk-gw/19f312ee7f91b0bb7337b749df7aa93a'.
Load address: 0x82000000
Loading: *################################################## 42.3 MiB
11.1 MiB/s
done
Bytes transferred = 44362240 (2a4ea00 hex)
=> tftp ${fdt_addr_r} 192.168.0.1:vatf_j721e-idk-gw/30669f09bae7117ca48abe7eda74cc6f
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 192.168.0.1; our IP address is 192.168.0.30
Filename 'vatf_j721e-idk-gw/30669f09bae7117ca48abe7eda74cc6f'.
Load address: 0x88000000
Loading: *################################################## 121.1 KiB
9.9 MiB/s
done
Bytes transferred = 123966 (1e43e hex)
=> fdt address ${fdt_addr_r}
Working FDT set to 88000000
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=> setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096 '
=> printenv bootcmd
bootcmd=
=> setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed2000
reloc off = 0x000000007f6d2000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 78:db:2f:e0:81:ed
IP addr = 192.168.0.30
fdt_blob = 0x00000000fde98b90
new_fdt = 0x00000000fde98b90
fdt_size = 0x0000000000019220
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce89000-0xffffffff], 0x03177000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde98b80
sp start = 0x00000000fde98b80
Early malloc usage: 31b0 / 8000
=>
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed2000
reloc off = 0x000000007f6d2000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 78:db:2f:e0:81:ed
IP addr = 192.168.0.30
fdt_blob = 0x00000000fde98b90
new_fdt = 0x00000000fde98b90
fdt_size = 0x0000000000019220
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce89000-0xffffffff], 0x03177000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde98b80
sp start = 0x00000000fde98b80
Early malloc usage: 31b0 / 8000
=> ls mmc 0:1
974120 tispl.bin
1272860 u-boot.img
293216 tiboot3.bin
268998 sysfw.itb
33 secondary_bootloader.md5
4 ws-calibrate.rules
6 file(s), 0 dir(s)
=> ls mmc 1:1
EFI/
19376640 Image
268978 sysfw.itb
268978 sysfw-j721e-gp-evm.itb
278254 sysfw-j721e_sr1_1-hs-evm.itb
269718 sysfw-j721e_sr1_1-hs-fs-evm.itb
278254 sysfw-j721e_sr2-hs-evm.itb
269718 sysfw-j721e_sr2-hs-fs-evm.itb
296345 tiboot3.bin
296345 tiboot3-j721e-gp-evm.bin
297120 tiboot3-j721e_sr1_1-hs-evm.bin
297120 tiboot3-j721e_sr1_1-hs-fs-evm.bin
297120 tiboot3-j721e_sr2-hs-evm.bin
297120 tiboot3-j721e_sr2-hs-fs-evm.bin
1091259 tispl.bin
1328275 u-boot.img
574 uEnv.txt
4 ws-calibrate.rules
17 file(s), 1 dir(s)
=> ext4ls mmc 0:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
<DIR> 4096 cadence
<DIR> 4096 ethfw
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2120860 iwlwifi-8000C-22.ucode
2227284 iwlwifi-8000C-27.ucode
2310116 iwlwifi-8000C-31.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
1811984 iwlwifi-8265-22.ucode
2234528 iwlwifi-8265-27.ucode
2307104 iwlwifi-8265-31.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2637216 iwlwifi-9260-th-b0-jf-b0-33.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
2620656 iwlwifi-9260-th-b0-jf-b0-41.ucode
2558176 iwlwifi-9260-th-b0-jf-b0-43.ucode
1489668 iwlwifi-9260-th-b0-jf-b0-46.ucode
<DIR> 4096 sdcard-firmware
<SYM> 49 j7-pru0_0-fw
<SYM> 49 j7-pru0_1-fw
<SYM> 49 j7-pru1_0-fw
<SYM> 49 j7-pru1_1-fw
<SYM> 49 j7-rtu0_0-fw
<SYM> 49 j7-rtu0_1-fw
<SYM> 49 j7-rtu1_0-fw
<SYM> 49 j7-rtu1_1-fw
<SYM> 35 j7-txpru0_0-fw
<SYM> 35 j7-txpru0_1-fw
<SYM> 35 j7-txpru1_0-fw
<SYM> 35 j7-txpru1_1-fw
<DIR> 4096 pdk-ipc
<DIR> 4096 pru
247469 pvdec_full_bin.fw
4592 regulatory.db
1182 regulatory.db.p7s
122880 rgx.fw.22.104.208.318
122880 rgx.fw.22.104.208.318.64k
344760 rgx.sh.22.104.208.318
<DIR> 4096 ti-connectivity
=> ext4ls mmc 1:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
482656 bl32.bin
4324296 bl32.elf
<DIR> 4096 cadence
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode
<SYM> 69 j7-c66_0-fw
<SYM> 76 j7-c66_0-fw-sec
<SYM> 69 j7-c66_1-fw
<SYM> 76 j7-c66_1-fw-sec
<SYM> 65 j7-c71_0-fw
<SYM> 72 j7-c71_0-fw-sec
<SYM> 67 j7-main-r5f0_0-fw
<SYM> 74 j7-main-r5f0_0-fw-sec
<SYM> 67 j7-main-r5f0_1-fw
<SYM> 74 j7-main-r5f0_1-fw-sec
<SYM> 67 j7-main-r5f1_0-fw
<SYM> 74 j7-main-r5f1_0-fw-sec
<SYM> 67 j7-main-r5f1_1-fw
<SYM> 74 j7-main-r5f1_1-fw-sec
<SYM> 67 j7-mcu-r5f0_1-fw
<SYM> 74 j7-mcu-r5f0_1-fw-sec
<SYM> 49 j7-pru0_0-fw
<SYM> 49 j7-pru0_1-fw
<SYM> 49 j7-pru1_0-fw
<SYM> 49 j7-pru1_1-fw
<SYM> 49 j7-rtu0_0-fw
<SYM> 49 j7-rtu0_1-fw
<SYM> 49 j7-rtu1_0-fw
<SYM> 49 j7-rtu1_1-fw
<SYM> 35 j7-txpru0_0-fw
<SYM> 35 j7-txpru0_1-fw
<SYM> 35 j7-txpru1_0-fw
<SYM> 35 j7-txpru1_1-fw
<DIR> 4096 pru
247469 pvdec_full_bin.fw
4728 regulatory.db
1182 regulatory.db.p7s
135168 rgx.fw.22.104.208.318
135168 rgx.fw.22.104.208.318.64k
382744 rgx.sh.22.104.208.318
28 tee-header_v2.bin
0 tee-pageable_v2.bin
482656 tee-pager_v2.bin
482656 tee-raw.bin
482684 tee.bin
4324296 tee.elf
<DIR> 4096 ti-connectivity
<DIR> 4096 ti-eth
<DIR> 4096 ti-ipc
=> mmc rescan; echo $?
0
=> fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 24 ms (0 Bytes/s)
=> boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008ffde000, end 000000008ffff43d ... OK
Working FDT set to 8ffde000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Texas Instruments J721e EVM
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: legacy bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000
[ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7d99c0-0x8ff7dbfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
[ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
[ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
[ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 24 pages/cpu s58792 r8192 d31320 u98304
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 0
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[ 0.000000] Memory: 3769040K/4194304K available (16960K kernel code, 4794K rwdata, 11348K rodata, 10048K init, 748K bss, 392496K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880400000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.009585] Console: colour dummy device 80x25
[ 0.014174] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.024845] pid_max: default: 32768 minimum: 301
[ 0.029593] LSM: initializing lsm=capability
[ 0.034007] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.041576] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.050563] rcu: Hierarchical SRCU implementation.
[ 0.055477] rcu: Max phase no-delay instances is 1000.
[ 0.061068] Platform MSI: msi-controller@1820000 domain created
[ 0.067329] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.076664] fsl-mc MSI: msi-controller@1820000 domain created
[ 0.084398] EFI services will not be available.
[ 0.089136] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.102341] Detected PIPT I-cache on CPU1
[ 0.102388] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.102401] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000
[ 0.102432] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.102512] smp: Brought up 1 node, 2 CPUs
[ 0.131861] SMP: Total of 2 processors activated.
[ 0.136664] CPU: All CPU(s) started at EL2
[ 0.140863] CPU features: detected: 32-bit EL0 Support
[ 0.146112] CPU features: detected: 32-bit EL1 Support
[ 0.151360] CPU features: detected: CRC32 instructions
[ 0.156625] alternatives: applying system-wide alternatives
[ 0.163554] devtmpfs: initialized
[ 0.174103] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.184105] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.191575] pinctrl core: initialized pinctrl subsystem
[ 0.198388] DMI not present or invalid.
[ 0.203860] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.210358] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.217671] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.225719] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.233845] audit: initializing netlink subsys (disabled)
[ 0.239457] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[ 0.240378] thermal_sys: Registered thermal governor 'step_wise'
[ 0.247386] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.253565] cpuidle: using governor menu
[ 0.264360] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.271324] ASID allocator initialised with 65536 entries
[ 0.278162] Serial: AMBA PL011 UART driver
[ 0.301583] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000
[ 0.310710] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000
[ 0.319557] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000
[ 0.332514] platform a000000.dp-bridge: Fixed dependency cycle(s) with /connector
[ 0.340209] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000
[ 0.349051] Modules: 21728 pages in range for non-PLT usage
[ 0.349055] Modules: 513248 pages in range for PLT usage
[ 0.355206] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.367570] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.373972] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.380905] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.387307] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.394241] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.400642] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.407578] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.414213] Demotion targets for Node 0: null
[ 0.419488] ACPI: Interpreter disabled.
[ 0.425129] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.0 JTAGID[0x0bb6402f] Detected
[ 0.434345] iommu: Default domain type: Translated
[ 0.439252] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.445723] SCSI subsystem initialized
[ 0.449725] usbcore: registered new interface driver usbfs
[ 0.455347] usbcore: registered new interface driver hub
[ 0.460787] usbcore: registered new device driver usb
[ 0.466793] pps_core: LinuxPPS API ver. 1 registered
[ 0.471867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.481206] PTP clock support registered
[ 0.485327] EDAC MC: Ver: 3.0.0
[ 0.489017] scmi_core: SCMI protocol bus registered
[ 0.494858] FPGA manager framework
[ 0.498380] Advanced Linux Sound Architecture Driver Initialized.
[ 0.505101] vgaarb: loaded
[ 0.508136] clocksource: Switched to clocksource arch_sys_counter
[ 0.514505] VFS: Disk quotas dquot_6.6.0
[ 0.518532] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.525648] pnp: PnP ACPI: disabled
[ 0.532440] NET: Registered PF_INET protocol family
[ 0.537565] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.546483] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.555249] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.563175] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.571375] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.579866] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.586642] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.593568] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.601005] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.607097] RPC: Registered named UNIX socket transport module.
[ 0.613156] RPC: Registered udp transport module.
[ 0.617960] RPC: Registered tcp transport module.
[ 0.622763] RPC: Registered tcp-with-tls transport module.
[ 0.628366] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.634954] PCI: CLS 0 bytes, default 64
[ 0.640598] kvm [1]: nv: 477 coarse grained trap handlers
[ 0.646273] kvm [1]: IPA Size Limit: 44 bits
[ 0.651552] kvm [1]: vgic-v2@6f020000
[ 0.655309] kvm [1]: GIC system register CPU interface enabled
[ 0.661284] kvm [1]: vgic interrupt IRQ9
[ 0.665301] kvm [1]: Hyp mode (nVHE) initialized successfully
[ 0.671923] Initialise system trusted keyrings
[ 0.676613] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.683362] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.689459] NFS: Registering the id_resolver key type
[ 0.694636] Key type id_resolver registered
[ 0.698909] Key type id_legacy registered
[ 0.703013] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.709864] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.717516] 9p: Installing v9fs 9p2000 file system support
[ 0.744383] Key type asymmetric registered
[ 0.748567] Asymmetric key parser 'x509' registered
[ 0.753579] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.761142] io scheduler mq-deadline registered
[ 0.765769] io scheduler kyber registered
[ 0.769882] io scheduler bfq registered
[ 0.780592] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[ 0.787021] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[ 0.793370] pinctrl-single 104200.pinctrl: 20 pins, size 80
[ 0.799123] pinctrl-single 104280.pinctrl: 8 pins, size 32
[ 0.833719] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.842619] msm_serial: driver initialized
[ 0.847105] SuperH (H)SCI(F) driver initialized
[ 0.851881] STM32 USART driver initialized
[ 0.857948] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[ 0.866132] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq
[ 0.873171] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq
[ 0.880847] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs
[ 0.892062] loop: module loaded
[ 0.896195] megasas: 07.727.03.00-rc1
[ 0.904813] tun: Universal TUN/TAP device driver, 1.6
[ 0.910779] thunder_xcv, ver 1.0
[ 0.914112] thunder_bgx, ver 1.0
[ 0.917421] nicpf, ver 1.0
[ 0.921158] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.928544] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.933989] hclge is initializing
[ 0.937394] e1000: Intel(R) PRO/1000 Network Driver
[ 0.942381] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.948264] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.953335] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.959395] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.964913] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.970616] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 0.977020] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 0.983338] sky2: driver version 1.30
[ 0.988222] VFIO - User Level meta-driver version: 0.3
[ 0.995788] usbcore: registered new interface driver usb-storage
[ 1.004272] i2c_dev: i2c /dev entries driver
[ 1.014268] sdhci: Secure Digital Host Controller Interface driver
[ 1.020599] sdhci: Copyright(c) Pierre Ossman
[ 1.025687] Synopsys Designware Multimedia Card Interface Driver
[ 1.032597] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.039921] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.046631] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.054046] usbcore: registered new interface driver usbhid
[ 1.059750] usbhid: USB HID core driver
[ 1.066297] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.076358] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.080915] optee: revision 4.1 (012cdca4)
[ 1.097370] optee: dynamic shared memory is enabled
[ 1.107009] random: crng init done
[ 1.110545] optee: initialized driver
[ 1.117616] NET: Registered PF_PACKET protocol family
[ 1.122841] 9pnet: Installing 9P2000 support
[ 1.127234] Key type dns_resolver registered
[ 1.135981] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 1.144324] registered taskstats version 1
[ 1.148572] Loading compiled-in X.509 certificates
[ 1.171873] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
[ 1.330682] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.337323] pca953x 1-0020: supply vcc not found, using dummy regulator
[ 1.344176] pca953x 1-0020: using no AI
[ 1.368903] pca953x 1-0022: supply vcc not found, using dummy regulator
[ 1.375729] pca953x 1-0022: using AI
[ 1.384753] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.391269] omap_i2c 2010000.i2c: bus 2 rev0.12 at 400 kHz
[ 1.397757] pca953x 3-0020: supply vcc not found, using dummy regulator
[ 1.404593] pca953x 3-0020: using no AI
[ 1.432695] omap_i2c 2030000.i2c: bus 3 rev0.12 at 400 kHz
[ 1.439174] pca953x 4-0020: supply vcc not found, using dummy regulator
[ 1.446005] pca953x 4-0020: using no AI
[ 1.472488] omap_i2c 2060000.i2c: bus 4 rev0.12 at 400 kHz
[ 1.478463] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[ 1.487163] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[ 1.496632] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[ 1.505362] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[ 1.517117] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
[ 1.527025] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 1.533794] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.543998] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211
[ 1.554181] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 1.560959] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.569779] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250
[ 1.580255] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250
[ 1.589117] printk: legacy console [ttyS2] enabled
[ 1.589117] printk: legacy console [ttyS2] enabled
[ 1.598793] printk: legacy bootconsole [ns16550a0] disabled
[ 1.598793] printk: legacy bootconsole [ns16550a0] disabled
[ 1.613522] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250
[ 1.623560] 2820000.serial: ttyS0 at MMIO 0x2820000 (irq = 216, base_baud = 3000000) is a 8250
[ 1.633388] 2840000.serial: ttyS4 at MMIO 0x2840000 (irq = 217, base_baud = 3000000) is a 8250
[ 1.643901] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.688139] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.697584] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.705856] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 1.718667] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.725875] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.734982] mmc0: CQHCI version 5.10
[ 1.744856] pca953x 2-0020: supply vcc not found, using dummy regulator
[ 1.751682] pca953x 2-0020: using no AI
[ 1.770051] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.776146] mmc0: SDHCI controller on 4f80000.mmc [4f80000.mmc] using ADMA 64-bit
[ 1.781822] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16)
[ 1.799304] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.844142] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.853597] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.861871] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 1.874690] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.881904] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.894139] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 1.905488] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.912687] mmc1: CQHCI version 5.10
[ 1.920965] mmc0: Command Queue Engine enabled
[ 1.925413] mmc0: new HS200 MMC card at address 0001
[ 1.930670] mmcblk0: mmc0:0001 S0J56X 14.8 GiB
[ 1.936072] mmcblk0: p1 p2 p3
[ 1.939458] mmcblk0boot0: mmc0:0001 S0J56X 31.5 MiB
[ 1.944966] mmcblk0boot1: mmc0:0001 S0J56X 31.5 MiB
[ 1.950412] mmcblk0rpmb: mmc0:0001 S0J56X 4.00 MiB, chardev (511:0)
[ 1.954748] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 1.971980] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 1.981452] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 2.019388] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[ 2.026325] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 2.034990] mmcblk1: p1 p2 p3
[ 6.085823] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.112137] Sending DHCP requests ., OK
[ 6.131976] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.30
[ 6.139619] IP-Config: Complete:
[ 6.142837] device=eth0, hwaddr=78:db:2f:e0:81:ed, ipaddr=192.168.0.30, mask=255.255.255.0, gw=192.168.0.1
[ 6.152904] host=j721e-idk-gw, domain=eptf.internal.ti.com, nis-domain=(none)
[ 6.160454] bootserver=192.168.0.1, rootserver=192.168.0.1, rootpath=
[ 6.160457] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 6.173144] clk: Disabling unused clocks
[ 6.201207] PM: genpd: Disabling unused power domains
[ 6.206332] ALSA device list:
[ 6.209351] No soundcards found.
[ 6.254302] VFS: Mounted root (nfs filesystem) on device 0:22.
[ 6.290077] devtmpfs: mounted
[ 6.297846] Freeing unused kernel memory: 10048K
[ 6.302619] Run /sbin/init as init process
[ 6.732917] systemd[1]: System time before build time, advancing clock.
[ 6.840529] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 6.871919] systemd[1]: Detected architecture arm64.
Welcome to [1mArago 2023.10[0m!
[ 6.941341] systemd[1]: Hostname set to <j721e-evm>.
[ 7.053778] systemd[80]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 7.065100] systemd-sysv-generator[89]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 7.309400] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 7.318297] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 7.353479] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 7.427119] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 7.495446] systemd[1]: Queued start job for default target Graphical Interface.
[ 7.544866] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 7.565507] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 7.589465] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 7.613194] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 7.636352] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m.
[ 7.660289] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m.
[ 7.684317] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 7.700203] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 7.720197] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 7.736206] systemd[1]: Reached target Swaps.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[ 7.782962] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 7.808315] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 7.831963] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 7.852380] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 7.876840] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 7.896789] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 7.920511] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 7.940903] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 7.965499] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 7.988422] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 8.008738] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 8.048415] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 8.070674] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 8.094626] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 8.116394] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 8.148422] systemd[1]: Mounting Temporary Directory /tmp...
Mounting [0;1;39mTemporary Directory /tmp[0m...
[ 8.168423] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.9.0-rc1-next-20240326-00005-g5b564084f3b5/modules.devname).
[ 8.189016] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 8.206490] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 8.240555] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 8.271783] systemd[1]: Starting Start psplash boot splash screen...
Starting [0;1;39mStart psplash boot splash screen[0m...
[ 8.332682] systemd[1]: Starting RPC Bind...
Starting [0;1;39mRPC Bind[0m...
[ 8.352642] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 8.369073] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 8.389969] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 8.416091] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network ts from Kernel command line[0m...
[ 8.462495] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 8.489221] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 8.512082] systemd[1]: Started RPC Bind.
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m.
[ 8.529227] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m.
See 'systemctl status psplash-start.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m.
See 'systemctl status systemd-modules-load.service' for details.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
Starting [0;1;39mApply Kernel Variables[0m...
Starting [0;1;39mCreate Static Device Nodes in /dev[0[ 8.888213] systemd-journald[101]: Received client request to flush runtime journal.
m...
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/media/ram[0m...
Mounting [0;1;39m/var/volatile[0m...
[ 9.082483] audit: type=1334 audit(1651167747.348:2): prog-id=5 op=LOAD
[ 9.089449] audit: type=1334 audit(1651167747.356:3): prog-id=6 op=LOAD
Starting [0;1;39mRule-based Managefor Device Events and Files[0m...
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m.
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m.
Starting [0;1;39mLoad/Save Random Seed[0m...
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[ 9.583644] systemd-journald[101]: Oldest entry in /run/log/journal/c721d6728da34195a62acf4d3ea1dca1/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[ 9.601578] systemd-journald[101]: /run/log/journal/c721d6728da34195a62acf4d3ea1dca1/system.journal: Journal header limits reached or header out-of-date, rotating.
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Initialization[0m.
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m.
[[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m.
[[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
Starting [0;1;39mDocker Socket for the API[0m...
[[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m.
Starting [0;1;39mWeston socket[0m...
Starting [0;1;39mD-Bus System Message Bus[0m...
Starting [0;1;39mReboot and dump vmcore via kexec[0m...
[[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m.
[[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m.
[[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m.
[[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m.
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m.
[[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m.
[[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m.
Starting [0;1;39mPrint notice about GPLv3 packages[0m...
Starting [0;1;39mIPv6 Packet Filtering Framework[0m...
Starting [0;1;39mIPv4 Packet Filtering Framework[0m...
[[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m.
Starting [0;1;39mLighttpd Daemon[0m...
[[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m.
[ 10.203204] audit: type=1334 audit(1712764344.306:4): prog-id=7 op=LOAD
Starting [0;1;39mUser Login Management[0m...[ 10.215541] audit: type=1334 audit(1712764344.318:5): prog-id=8 op=LOAD
[[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m.
Starting [0;1;39mTelnet Server[0m...
Starting [0;1;39mRotate log files[0m...
[[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m.
[[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m.
Starting [0;1;39mNetwork Configuration[0m...
[[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m.
[[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m.
[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m.
[[0;32m OK [0m] Finished [0;1;39mRotate log files[0m.
[[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m.
Starting [0;1;39mNetwork Name Resolution[0m...
[ 11.078003] audit: type=1334 audit(1712764345.182:6): prog-id=9 op=LOAD
[ 11.087422] audit: type=1334 audit(1712764345.190:7): prog-id=10 op=LOAD
Starting [0;1;39mHostname Service[0m...
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m.
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m...
Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m...
Starting [0;1;39mcontainerd container runtime[0m...
[[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m.
[[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m.
Starting [0;1;39mPermit User Sessions[0m...
[[0;32m OK [0m] Started [0;1;39mHostname Service[0m.
[[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m.
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m.
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m.
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m.
Starting [0;1;39mSynchronize System and HW clocks[0m...
Starting [0;1;39mWeston, a Waylandositor, as a system service[0m...
[[0;32m OK [0m] Finished [0;1;39mEnable and configure wl18xx bluetooth stack[0m.
[[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m.
See 'systemctl status sync-clocks.service' for details.
[ 11.988484] audit: type=1334 audit(1712764346.090:8): prog-id=11 op=LOAD
[ 11.996000] audit: type=1334 audit(1712764346.090:9): prog-id=12 op=LOAD
Starting [0;1;39mUser Database Manager[0m...
[[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m.
[[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m.
Starting [0;1;39mUser Runtime Directory /run/user/1000[0m...
[[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m.
Starting [0;1;39mUser Manager for UID 1000[0m...
[ 12.580591] audit: type=1006 audit(1712764346.686:10): pid=467 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 12.596968] audit: type=1300 audit(1712764346.686:10): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffe8393978 a2=4 a3=0 items=0 ppid=1 pid=467 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m.
[[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m.
[[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m.
See 'systemctl status weston.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p1[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk0p1[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p2[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk0p2[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p1[0m.
Mounting [0;1;39m/run/media/mmcblk0p1[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk0p3[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk0p3[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p2[0m.
Mounting [0;1;39m/run/media/rootfs-mmcblk0p2[0m...
[ 13.914771] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m.
[ 13.950821] EXT4-fs (mmcblk0p2): mounted filesystem 4a0dce62-d020-4bae-aa8f-a5e7d7cfe639 r/w with ordered data mode. Quota mode: none.
Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m...
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p1[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk0p3[0m.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/rootfs-mmcblk0p2[0m.
Mounting [0;1;39m/run/media/mmcblk0p3[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m.
Mounting [0;1;39m/run/media/root-mmcblk1p2[0m...
[ 14.022329] FAT-fs (mmcblk0p3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk0p3[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m.
[ 14.100019] EXT4-fs (mmcblk1p2): mounted filesystem e2d41d91-632f-47ae-abe5-573c1a40f004 r/w with ordered data mode. Quota mode: none.
Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m...
[[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m.
Mounting [0;1;39m/run/media/mmcblk1p3[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m.
Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m...
[ 14.209755] EXT4-fs (mmcblk1p3): mounted filesystem c06e4a7f-969e-49d6-98a6-0a2d8bed1e5b r/w with ordered data mode. Quota mode: none.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m.
[ 14.262122] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m.
***************************************************************
***************************************************************
NOTICE: This file system contains the following GPL-3.0 packages:
adwaita-icon-theme-symbolic
autoconf
bash
bc
binutils
cifs-utils
coreutils-stdbuf
coreutils
cpio
cpp-symlinks
cpp
dosfstools
elfutils
g++-symlinks
g++
gawk
gcc-symlinks
gcc
gdb
gdbserver
gettext
glmark2
gnu-config
grub-common
grub-editenv
grub-efi
gzip
less
libasm1
libatomic-dev
libatomic1
libbfd
libdebuginfod1
libdw1
libelf1
libgcc-s-dev
libgcc1
libgdbm-compat4
libgdbm6
libgettextlib
libgettextsrc
libgmp10
libidn2-0
libmpc3
libmpfr6
libopcodes
libqt5charts-examples
libqt5charts-plugins
libqt5charts-qmlplugins
libqt5charts5
libqt5sensors-plugins
libqt5sensors-qmlplugins
libqt5sensors5
libqt5serialport-examples
libqt5serialport-plugins
libqt5serialport-qmlplugins
libqt5serialport5
libqt5svg-examples
libqt5svg-plugins
libqt5svg-qmlplugins
libqt5svg5
libqt5virtualkeyboard-plugins
libqt5virtualkeyboard-qmlplugins
libqt5virtualkeyboard5
libqt5webchannel-plugins
libqt5webchannel-qmlplugins
libqt5webchannel5
libreadline8
libstdc++-dev
libstdc++6
libunistring2
m4
make
nettle
parted
piglit
qt3d-plugins
qt3d-qmlplugins
qt3d
qtbase-examples
qtbase-plugins
qtbase-qmlplugins
qtbase
qtconnectivity-plugins
qtconnectivity-qmlplugins
qtconnectivity
qtdeclarative-plugins
qtdeclarative-qmlplugins
qtdeclarative-tools
qtdeclarative
qtgraphicaleffects-qmlplugins
qtlocation-examples
qtlocation-plugins
qtlocation-qmlplugins
qtlocation
qtmultimedia-examples
qtmultimedia-plugins
qtmultimedia-qmlplugins
qtmultimedia
qtquics-qmlplugins.control
qtquics2-plugins.control
qtquics2-qmlplugins.control
qtquics2.control
qtscript-examples
qtscript-plugins
qtscript-qmlplugins
qtscript
qtwayland-examples
qtwayland-plugins
qtwayland-qmlplugins
qtwayland
tar
which
If you do not wish to distribute GPL-3.0 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove <package>
Where <package> is the name printed in the list above
NOTE: If the package is a dependency of another package you
will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
[[0;32m OK [0m] Finished [0;1;39mPrint notice about GPLv3 packages[0m.
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m.
[[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m.
Starting [0;1;39mRecord Runlevel Change in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project j721e-evm -
Arago 2023.10 j721e-evm -
j721e-evm login: root
[ 17.097631] kauditd_printk_skb: 4 callbacks suppressed
[ 17.097640] audit: type=1006 audit(1712764351.202:12): pid=1070 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[ 17.115509] audit: type=1300 audit(1712764351.202:12): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffe8393978 a2=1 a3=0 items=0 ppid=1 pid=1070 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 17.140956] audit: type=1327 audit(1712764351.202:12): proctitle="(systemd)"
[ 17.148049] audit: type=1334 audit(1712764351.218:13): prog-id=13 op=LOAD
[ 17.154903] audit: type=1300 audit(1712764351.218:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffdd042320 a2=78 a3=0 items=0 ppid=1 pid=1070 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 17.180335] audit: type=1327 audit(1712764351.218:13): proctitle="(systemd)"
[ 17.187479] audit: type=1334 audit(1712764351.254:14): prog-id=13 op=UNLOAD
[ 17.194504] audit: type=1300 audit(1712764351.254:14): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffffbd782020 a2=0 a3=ffffbd7827e0 items=0 ppid=1 pid=1070 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 17.220991] audit: type=1327 audit(1712764351.254:14): proctitle="(systemd)"
[ 17.228187] audit: type=1334 audit(1712764351.254:15): prog-id=14 op=LOAD
7[r[999;999H[6nroot@j721e-evm:~# uname -a
Linux j721e-evm 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j721e-evm:~# cat /proc/cmdline
console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=192.168.0.1:/opt/NFS_exports/linux/j721e-idk-gw/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096
root@j721e-evm:~# uname -a
Linux j721e-evm 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j721e-evm:~# cat /proc/mtd
dev: size erasesize name
root@j721e-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p
pnp /etc/resolv.conf && systemctl restart systemd-resolved
root@j721e-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc
total 28296
-rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware
-rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware
-rw-r--r-- 1 root root 482656 Mar 9 2018 bl32.bin
-rw-r--r-- 1 root root 4324296 Mar 9 2018 bl32.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence
drwxr-xr-x 2 root root 4096 Mar 9 2018 intel
-rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode
-rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode
-rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode
-rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode
-rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode
-rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode
-rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode
-rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode
lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66
lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66.signed
lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66
lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66.signed
lrwxrwxrwx 1 root root 65 Mar 9 2018 j7-c71_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71
lrwxrwxrwx 1 root root 72 Mar 9 2018 j7-c71_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_1.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out
drwxr-xr-x 2 root root 4096 Mar 9 2018 pru
-rw-r--r-- 1 root root 247469 Mar 9 2018 pvdec_full_bin.fw
-rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db
-rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s
-rw-r--r-- 1 root root 135168 Mar 9 2018 rgx.fw.22.104.208.318
-rw-r--r-- 1 root root 135168 Mar 9 2018 rgx.fw.22.104.208.318.64k
-rw-r--r-- 1 root root 382744 Mar 9 2018 rgx.sh.22.104.208.318
-rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin
-rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-pager_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-raw.bin
-rw-r--r-- 1 root root 482684 Mar 9 2018 tee.bin
-rw-r--r-- 1 root root 4324296 Mar 9 2018 tee.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc
ls: cannot access '/lib/firmware/ipc': No such file or directory
root@j721e-evm:~# cat /proc/diskstats
7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
179 0 mmcblk0 745 47 40009 443 1 0 8 0 0 600 444 0 0 0 0 0 0
179 1 mmcblk0p1 204 0 4748 73 0 0 0 0 0 168 73 0 0 0 0 0 0
179 2 mmcblk0p2 250 47 17338 194 1 0 8 0 0 276 195 0 0 0 0 0 0
179 3 mmcblk0p3 252 0 16715 156 0 0 0 0 0 292 156 0 0 0 0 0 0
179 32 mmcblk0boot0 68 0 1344 26 0 0 0 0 0 48 26 0 0 0 0 0 0
179 64 mmcblk0boot1 68 0 1344 41 0 0 0 0 0 52 41 0 0 0 0 0 0
179 96 mmcblk1 742 32 49643 1693 2 0 16 2 0 1392 1696 0 0 0 0 0 0
179 97 mmcblk1p1 265 0 16673 639 0 0 0 0 0 864 639 0 0 0 0 0 0
179 98 mmcblk1p2 205 31 15056 437 1 0 8 2 0 676 440 0 0 0 0 0 0
179 99 mmcblk1p3 235 1 16722 573 1 0 8 0 0 748 573 0 0 0 0 0 0
root@j721e-evm:~# cat /proc/interrupts
CPU0 CPU1
9: 0 0 GICv3 25 Level vgic
11: 3667 4134 GICv3 30 Level arch_timer
12: 0 0 GICv3 27 Level kvm guest vtimer
14: 0 0 GICv3 804 Edge arm-smmu-v3-evtq
15: 0 0 GICv3 800 Edge arm-smmu-v3-gerror
16: 0 0 GICv3 23 Level arm-pmu
17: 3077 0 GICv3 69 Level 32c00000.mailbox thr_011
38: 0 0 GICv3 928 Level 42120000.i2c
39: 48 0 GICv3 232 Level 2000000.i2c
40: 18 0 GICv3 233 Level 2010000.i2c
41: 6 0 GICv3 235 Level 2030000.i2c
42: 6 0 GICv3 238 Level 2060000.i2c
43: 1 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0
44: 2 0 MSI-INTA 15401057 Level 46000000.ethernet-tx1
45: 12 0 MSI-INTA 15401058 Level 46000000.ethernet-tx2
46: 6 0 MSI-INTA 15401059 Level 46000000.ethernet-tx3
47: 4 0 MSI-INTA 15401060 Level 46000000.ethernet-tx4
48: 42632 0 MSI-INTA 15401061 Level 46000000.ethernet-tx5
49: 2 0 MSI-INTA 15401062 Level 46000000.ethernet-tx6
50: 13 0 MSI-INTA 15401063 Level 46000000.ethernet-tx7
52: 67601 0 MSI-INTA 15401065 Level 46000000.ethernet
213: 0 0 GICv3 878 Level 40a00000.serial
214: 726 0 GICv3 224 Level 2800000.serial
215: 0 0 GICv3 225 Level 2810000.serial
216: 0 0 GICv3 226 Level 2820000.serial
217: 0 0 GICv3 228 Level 2840000.serial
218: 1049 0 GICv3 35 Level mmc0
232: 0 0 GPIO 7 Edge -davinci_gpio GPIO Key USER2
317: 0 0 GPIO 0 Edge -davinci_gpio GPIO Key USER1
459: 0 0 GPIO 11 Edge -davinci_gpio 2-0020
633: 1585 0 GICv3 36 Level mmc1
IPI0: 3055 9786 Rescheduling interrupts
IPI1: 4474 13247 Function call interrupts
IPI2: 0 0 CPU stop interrupts
IPI3: 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 Timer broadcast interrupts
IPI5: 0 0 IRQ work interrupts
Err: 0
root@j721e-evm:~# cat /proc/softirqs
CPU0 CPU1
HI: 0 0
TIMER: 1507 1673
NET_TX: 21 1
NET_RX: 77139 24
BLOCK: 879 0
IRQ_POLL: 0 0
TASKLET: 1968 1
SCHED: 2020 2203
HRTIMER: 0 0
RCU: 6876 7547
root@j721e-evm:~# ls -lR /run/media/mmcblk0p1
/run/media/mmcblk0p1:
total 2746
-rwxrwx--- 1 root disk 33 Jun 26 2022 secondary_bootloader.md5
-rwxrwx--- 1 root disk 268998 Jun 26 2022 sysfw.itb
-rwxrwx--- 1 root disk 293216 Jun 26 2022 tiboot3.bin
-rwxrwx--- 1 root disk 974120 Jun 26 2022 tispl.bin
-rwxrwx--- 1 root disk 1272860 Jun 26 2022 u-boot.img
-rwxrwx--- 1 root disk 4 Jan 1 1980 ws-calibrate.rules
root@j721e-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $?
1
root@j721e-evm:~# [ 41.464489] kauditd_printk_skb: 5 callbacks suppressed
[ 41.464497] audit: type=1334 audit(1712764375.570:17): prog-id=10 op=UNLOAD
[ 41.476596] audit: type=1334 audit(1712764375.570:18): prog-id=9 op=UNLOAD
opkg list-installed | grep ti-test; echo $?
ti-test - 1.0-r0.121
ti-test-extras - 1.0-r0.121
0
root@j721e-evm:~# lsmod
Module Size Used by
root@j721e-evm:~# depmod -a
depmod: ERROR: could not open directory /lib/modules/6.9.0-rc1-next-20240326-00005-g5b564084f3b5: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
root@j721e-evm:~# lsmod
Module Size Used by
root@j721e-evm:~# echo 'hello world'
hello world
root@j721e-evm:~#
Raw
j721e-sk
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Trying to boot from UART
Cmage was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1091259 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.10.0(release):v2.10.0-367-g00f1ec6b87-dirty
NOTICE: BL31: Built : 16:09:05, Feb 9 2024
I/TC:
I/TC: OP-TEE version: 4.1.0-51-g012cdca49 (gcc version 11.4.0 (GCC)) #1 Tue Jan 30 10:48:03 UTC 2024 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: GIC redistributor base address not provided
I/TC: Assuming default GIC group status and modifier
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
Trying to boot from UART
Cmage was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1328275 bytes
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
SoC: J721E SR1.1 GP
Model: Texas Instruments J721E SK A72
Board: J721EX-EAIK rev E2
DRAM: 2 GiB (effective 4 GiB)
Core: 102 devices, 34 uclasses, devicetree: separate
Flash: 0 Bytes
MMC: mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=>
=>
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> setenv bootargs 'console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled '
=> setenv bootcmd ''
=> setenv autoload 'no'
=> setenv serverip '10.24.68.106'
=> setenv _initramfs -
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e-sk
board_rev=E2
board_serial=0166
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
ethaddr=24:76:25:96:41:a1
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde9ab90
fdtoverlay_addr_r=0x89000000
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000166
serverip=10.24.68.106
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 11046/131067 bytes
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled
=> setenv bootargs ''${bootargs}' ip=:::::eth0:dhcp '
=> setenv serverip '10.24.68.106'
=> setenv autoload 'no'
=> dhcp
k3-navss-ringacc ringacc@2b800000: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
k3-navss-ringacc ringacc@2b800000: dma-ring-reset-quirk: disabled
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
DHCP client bound to address 10.24.72.113 (1049 ms)
=> setenv dorprocboot '1'
=> run boot_rprocs
k3_r5f_rproc r5f@41000000: Core 1 is already in use. No rproc commands work
Failed to load '/lib/firmware/j7-mcu-r5f0_1-fw'
79356 bytes read in 32 ms (2.4 MiB/s)
Load Remote Processor 2 with data@addr=0x82000000 79356 bytes: Success!
Failed to load '/lib/firmware/j7-main-r5f0_1-fw'
81036 bytes read in 33 ms (2.3 MiB/s)
k3_r5f_rproc r5f@5e00000: Invalid ELF32 Image -93
k3_r5f_rproc r5f@5e00000: Loading elf failedi -93
Load Remote Processor 4 with data@addr=0x82000000 81036 bytes: Failed!
Failed to load '/lib/firmware/j7-main-r5f1_1-fw'
147284 bytes read in 35 ms (4 MiB/s)
k3_dsp dsp@4d80800000: Invalid ELF32 Image -93
k3_dsp dsp@4d80800000: Loading elf failed -93
Load Remote Processor 6 with data@addr=0x82000000 147284 bytes: Failed!
147284 bytes read in 33 ms (4.3 MiB/s)
k3_dsp dsp@4d81800000: Invalid ELF32 Image -93
k3_dsp dsp@4d81800000: Loading elf failed -93
Load Remote Processor 7 with data@addr=0x82000000 147284 bytes: Failed!
10489000 bytes read in 41 ms (244 MiB/s)
Load Remote Processor 8 with data@addr=0x82000000 10489000 bytes: Success!
=> printenv
_initramfs=-
addr_fit=0x90000000
arch=arm
args_all=setenv optargs earlycon=ns16550a,mmio32,0x02800000 ${mtdparts}
args_mmc=run finduuid;setenv bootargs console=${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${mmcrootfstype}
args_ufs=setenv devtype scsi;setenv bootpart 1:1; run ufs_finduuid; setenv bootargs console = ${console} ${optargs} root=PARTUUID=${uuid} rw rootfstype=${scsirootfstype}; setenv devtype scsi; setenv bootpart 1:1
autoload=no
baudrate=115200
board=j721e
board_name=j721e-sk
board_rev=E2
board_serial=0166
board_software_revision=01
boot=mmc
boot_a_script=load ${devtype} ${devnum}:${distro_bootpart} ${scriptaddr} ${prefix}${script}; source ${scriptaddr}
boot_efi_binary=load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} efi/boot/bootaa64.efi; if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r};else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi
boot_efi_bootmgr=if fdt addr -q ${fdt_addr_r}; then bootefi bootmgr ${fdt_addr_r};else bootefi bootmgr;fi
boot_extlinux=sysboot ${devtype} ${devnum}:${distro_bootpart} any ${scriptaddr} ${prefix}${boot_syslinux_conf}
boot_fdt=try
boot_fit=0
boot_net_usb_start=usb start
boot_prefixes=/ /boot/
boot_rprocs=if test ${dorprocboot} -eq 1 && test ${boot} = mmc; then rproc init; run boot_rprocs_mmc; fi;
boot_rprocs_mmc=env set rproc_id; env set rproc_fw; env set secure_suffix; if test ${secure_rprocs} -eq 1; then env set secure_suffix -sec; fi; for i in ${rproc_fw_binaries} ; do if test -z "${rproc_id}" ; then env set rproc_id $i; else env set rproc_fw $i${secure_suffix}; run rproc_load_and_boot_one; env set rproc_id; env set rproc_fw; fi; done
boot_script_dhcp=boot.scr.uimg
boot_scripts=boot.scr.uimg boot.scr
boot_syslinux_conf=extlinux/extlinux.conf
boot_targets=ti_mmc mmc0 mmc1 usb0 pxe dhcp
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
bootcmd=
bootcmd_dhcp=devtype=dhcp; run boot_net_usb_start; if dhcp ${scriptaddr} ${boot_script_dhcp}; then source ${scriptaddr}; fi;setenv efi_fdtfile ${fdtfile}; setenv efi_old_vci ${bootp_vci};setenv efi_old_arch ${bootp_arch};setenv bootp_vci PXEClient:Arch:00011:UNDI:003000;setenv bootp_arch 0xb;if dhcp ${kernel_addr_r}; then tftpboot ${fdt_addr_r} dtb/${efi_fdtfile};if fdt addr -q ${fdt_addr_r}; then bootefi ${kernel_addr_r} ${fdt_addr_r}; else bootefi ${kernel_addr_r} ${fdtcontroladdr};fi;fi;setenv bootp_vci ${efi_old_vci};setenv bootp_arch ${efi_old_arch};setenv efi_fdtfile;setenv efi_old_arch;setenv efi_old_vci;
bootcmd_mmc0=devnum=0; run mmc_boot
bootcmd_mmc1=devnum=1; run mmc_boot
bootcmd_pxe=run boot_net_usb_start; dhcp; if pxe get; then pxe boot; fi
bootcmd_ti_mmc=run findfdt; run init_${boot}; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1; then run main_cpsw0_qsgmii_phyinit; fi; run boot_rprocs; if test ${boot_fit} -eq 1; then run get_fit_${boot}; run get_fit_overlaystring; run run_fit; else; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern; fi;
bootcmd_usb0=devnum=0; run usb_boot
bootdelay=2
bootdir=/boot
bootenvfile=uEnv.txt
bootm_size=0x10000000
bootpart=1:2
bootscript=echo Running bootscript from mmc${mmcdev} ...; source ${loadaddr}
console=ttyS2,115200n8
cpu=armv8
default_device_tree=ti/k3-j721e-common-proc-board.dtb
dfu_alt_info_emmc=rawemmc raw 0 0x800000 mmcpart 1; rootfs part 0 1; tiboot3.bin.raw raw 0x0 0x400 mmcpart 1; tispl.bin.raw raw 0x400 0x1000 mmcpart 1; u-boot.img.raw raw 0x1400 0x2000 mmcpart 1; u-env.raw raw 0x3400 0x100 mmcpart 1; sysfw.itb.raw raw 0x3600 0x800 mmcpart 1
dfu_alt_info_mmc=boot part 1 1; rootfs part 1 2; tiboot3.bin fat 1 1; tispl.bin fat 1 1; u-boot.img fat 1 1; uEnv.txt fat 1 1; sysfw.itb fat 1 1
dfu_alt_info_nand=NAND.tiboot3 part 0 1; NAND.tispl part 0 2; NAND.tiboot3.backup part 0 3; NAND.u-boot part 0 4; NAND.u-boot-env part 0 5; NAND.u-boot-env.backup part 0 6; NAND.file-system part 0 7
dfu_alt_info_ospi=tiboot3.bin raw 0x0 0x080000; tispl.bin raw 0x080000 0x200000; u-boot.img raw 0x280000 0x400000; u-boot-env raw 0x680000 0x020000; sysfw.itb raw 0x6c0000 0x100000; rootfs raw 0x800000 0x3800000
dfu_alt_info_ospi_nand=ospi_nand.tiboot3 part 1; ospi_nand.tispl part 2; ospi_nand.u-boot part 3; ospi_nand.env part 4; ospi_nand.env.backup part 5; ospi_nand.rootfs part 6; ospi_nand.phypattern part 7
dfu_alt_info_ram=tispl.bin ram 0x80080000 0x200000; u-boot.img ram 0x81000000 0x400000
distro_bootcmd=scsi_need_init=; for target in ${boot_targets}; do run bootcmd_${target}; done
dnsip=192.0.2.2
dorprocboot=1
dtboaddr=0x89000000
efi_dtb_prefixes=/ /dtb/ /dtb/current/
envboot=mmc dev ${mmcdev}; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadbootscript; then run bootscript; else if run loadbootenv; then echo Loaded env from ${bootenvfile}; run importbootenv; fi; if test -n $uenvcmd; then echo Running uenvcmd ...; run uenvcmd; fi; fi; fi;
ethact=ethernet@46000000port@1
ethaddr=24:76:25:96:41:a1
fdt_addr_r=0x88000000
fdtaddr=0x88000000
fdtcontroladdr=fde9ab90
fdtoverlay_addr_r=0x89000000
fileaddr=82000000
filesize=a00ca8
findfdt=setenv name_fdt ${default_device_tree}; if test $board_name = j721e; then setenv name_fdt ti/k3-j721e-common-proc-board.dtb; fi; if test $board_name = BBONEAI-64-B0-; then setenv name_fdt ti/k3-j721e-beagleboneai64.dtb; fi; if test $board_name = j7200; then setenv name_fdt ti/k3-j7200-common-proc-board.dtb; fi; if test $board_name = j721e-eaik || test $board_name = j721e-sk; then setenv name_fdt ti/k3-j721e-sk.dtb; fi; setenv fdtfile ${name_fdt}
finduuid=part uuid ${boot} ${bootpart} uuid
gatewayip=10.24.72.1
get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/dtb/${name_fdt}
get_fdt_ufs=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}
get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}
get_fit_overlaystring=for overlay in $name_overlays; do; setexpr name_fit_overlay gsub / _ conf-${overlay}; setenv overlaystring ${overlaystring}'#'${name_fit_overlay}; done;
get_kern_mmc=load mmc ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_kern_ufs=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${name_kern}
get_overlay_mmc=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load mmc ${bootpart} ${dtboaddr} ${bootdir}/dtb/ti/${overlay} && fdt apply ${dtboaddr}; done;
get_overlay_ufs=fdt address ${fdtaddr}; fdt resize 0x100000; for overlay in $name_overlays; do; load scsi ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && fdt apply ${dtboaddr}; done;
hostname=dhcp-10-24-72-113
importbootenv=echo Importing environment from mmc${mmcdev} ...; env import -t ${loadaddr} ${filesize}
init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17; gpio clear gpio@22_16
init_mmc=run args_all args_mmc
init_ufs=ufs init; scsi scan; run args_ufs
ipaddr=10.24.72.113
kernel_addr_r=0x82000000
load_efi_dtb=load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}${efi_fdtfile}
loadaddr=0x82000000
loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenvfile}
loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr
loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/dtb/${fdtfile}
loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}
main_cpsw0_qsgmii_phyinit=if test $board_name = J721EX-PM1-SOM || test $board_name = J721EX-PM2-SOM || test $board_name = j721e; then do_main_cpsw0_qsgmii_phyinit=1; else do_main_cpsw0_qsgmii_phyinit=0; fi; if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && test ${boot} = mmc; then run init_main_cpsw0_qsgmii_phy; fi;
mmc_boot=if mmc dev ${devnum}; then devtype=mmc; run scan_dev_for_boot_part; fi
mmcboot=mmc dev ${mmcdev}; devnum=${mmcdev}; devtype=mmc; if mmc rescan; then echo SD/MMC found on device ${mmcdev}; if run loadimage; then run args_mmc; if test ${boot_fit} -eq 1; then run run_fit; else run mmcloados; fi; fi; fi;
mmcdev=1
mmcloados=if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run get_fdt_mmc; then bootz ${loadaddr} - ${fdtaddr}; else if test ${boot_fdt} = try; then bootz; else echo WARN: Cannot load the DT; fi; fi; else bootz; fi;
mmcrootfstype=ext4 rootwait
name_fit=fitImage
name_kern=Image
netmask=255.255.254.0
partitions=name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}
pxefile_addr_r=0x80100000
ramdisk_addr_r=0x88080000
rd_spec=-
rdaddr=0x88080000
rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
rproc_load_and_boot_one=if load mmc ${bootpart} $loadaddr ${rproc_fw}; then if rproc load ${rproc_id} ${loadaddr} ${filesize}; then rproc start ${rproc_id}; fi; fi
run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}
scan_dev_for_boot=echo Scanning ${devtype} ${devnum}:${distro_bootpart}...; for prefix in ${boot_prefixes}; do run scan_dev_for_extlinux; run scan_dev_for_scripts; done;run scan_dev_for_efi;
scan_dev_for_boot_part=part list ${devtype} ${devnum} -bootable devplist; env exists devplist || setenv devplist 1; for distro_bootpart in ${devplist}; do if fstype ${devtype} ${devnum}:${distro_bootpart} bootfstype; then part uuid ${devtype} ${devnum}:${distro_bootpart} distro_bootpart_uuid ; run scan_dev_for_boot; fi; done; setenv devplist
scan_dev_for_efi=setenv efi_fdtfile ${fdtfile}; for prefix in ${efi_dtb_prefixes}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${efi_fdtfile}; then run load_efi_dtb; fi;done;run boot_efi_bootmgr;if test -e ${devtype} ${devnum}:${distro_bootpart} efi/boot/bootaa64.efi; then echo Found EFI removable media binary efi/boot/bootaa64.efi; run boot_efi_binary; echo EFI LOAD FAILED: continuing...; fi; setenv efi_fdtfile
scan_dev_for_extlinux=if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${boot_syslinux_conf}; then echo Found ${prefix}${boot_syslinux_conf}; run boot_extlinux; echo EXTLINUX FAILED: continuing...; fi
scan_dev_for_scripts=for script in ${boot_scripts}; do if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}${script}; then echo Found U-Boot script ${prefix}${script}; run boot_a_script; echo SCRIPT FAILED: continuing...; fi; done
scriptaddr=0x80000000
scsi_boot=run scsi_init; if scsi dev ${devnum}; then devtype=scsi; run scan_dev_for_boot_part; fi
scsi_init=if ${scsi_need_init}; then scsi_need_init=false; scsi scan; fi
scsirootfstype=ext4 rootwait
secure_rprocs=0
serial#=0000000000000166
serverip=10.24.68.106
soc=k3
stderr=serial@2800000
stdin=serial@2800000
stdout=serial@2800000
ubifs_boot=if ubi part ${bootubipart} ${bootubioff} && ubifsmount ubi0:${bootubivol}; then devtype=ubi; devnum=ubi0; bootfstype=ubifs; distro_bootpart=${bootubivol}; run scan_dev_for_boot; ubifsumount; fi
ufs_finduuid=part uuid scsi ${bootpart} uuid
update_to_fit=setenv loadaddr ${addr_fit}; setenv bootfile ${name_fit}
usb_boot=usb start; if usb dev ${devnum}; then devtype=usb; run scan_dev_for_boot_part; fi
vendor=ti
Environment size: 11236/131067 bytes
=> tftp ${loadaddr} 10.24.68.106:vatf_j721e-sk-01/19f312ee7f91b0bb7337b749df7aa93a
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 10.24.68.106; our IP address is 10.24.72.113; sending through gateway 10.24.72.1
Filename 'vatf_j721e-sk-01/19f312ee7f91b0bb7337b749df7aa93a'.
Load address: 0x82000000
Loading: *################################################## 42.3 MiB
7.3 MiB/s
done
Bytes transferred = 44362240 (2a4ea00 hex)
=> tftp ${fdt_addr_r} 10.24.68.106:vatf_j721e-sk-01/4ab6caaddc9851b1e4e6d2abff459948
am65_cpsw_nuss_port ethernet@46000000port@1: K3 CPSW: rflow_id_base: 2
link up on port 1, speed 1000, full duplex
Using ethernet@46000000port@1 device
TFTP from server 10.24.68.106; our IP address is 10.24.72.113; sending through gateway 10.24.72.1
Filename 'vatf_j721e-sk-01/4ab6caaddc9851b1e4e6d2abff459948'.
Load address: 0x88000000
Loading: *################################################## 116.1 KiB
4.7 MiB/s
done
Bytes transferred = 118882 (1d062 hex)
=> fdt address ${fdt_addr_r}
Working FDT set to 88000000
=> printenv bootargs
bootargs=console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp
=> setenv bootargs ''${bootargs}' root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096 '
=> printenv bootcmd
bootcmd=
=> setenv bootcmd ''${bootcmd}' if iminfo ${loadaddr}; then bootm ${loadaddr} ${_initramfs} ${fdt_addr_r}; else booti ${loadaddr} ${_initramfs} ${fdt_addr_r}; fi'
=> version
U-Boot 2023.04-ti-gf9b966c67473 (Mar 19 2024 - 20:31:40 +0000)
aarch64-oe-linux-gcc (GCC) 11.4.0
GNU ld (GNU Binutils) 2.38.20220708
=> bdinfo
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed2000
reloc off = 0x000000007f6d2000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 24:76:25:96:41:a1
IP addr = 10.24.72.113
fdt_blob = 0x00000000fde9ab90
new_fdt = 0x00000000fde9ab90
fdt_size = 0x0000000000017220
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce8b000-0xffffffff], 0x03175000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde9ab80
sp start = 0x00000000fde9ab80
Early malloc usage: 2990 / 8000
=>
boot_params = 0x0000000000000000
DRAM bank = 0x0000000000000000
-> start = 0x0000000080000000
-> size = 0x0000000080000000
DRAM bank = 0x0000000000000001
-> start = 0x0000000880000000
-> size = 0x0000000080000000
flashstart = 0x0000000000000000
flashsize = 0x0000000000000000
flashoffset = 0x0000000000000000
baudrate = 115200 bps
relocaddr = 0x00000000ffed2000
reloc off = 0x000000007f6d2000
Build = 64-bit
current eth = ethernet@46000000port@1
ethaddr = 24:76:25:96:41:a1
IP addr = 10.24.72.113
fdt_blob = 0x00000000fde9ab90
new_fdt = 0x00000000fde9ab90
fdt_size = 0x0000000000017220
multi_dtb_fit= 0x0000000000000000
lmb_dump_all:
memory.cnt = 0x2
memory[0] [0x80000000-0xffffffff], 0x80000000 bytes flags: 0
memory[1] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
reserved.cnt = 0x4
reserved[0] [0x9e800000-0xa8ffffff], 0x0a800000 bytes flags: 4
reserved[1] [0xaa000000-0xabbfffff], 0x01c00000 bytes flags: 4
reserved[2] [0xfce8b000-0xffffffff], 0x03175000 bytes flags: 0
reserved[3] [0x880000000-0x8ffffffff], 0x80000000 bytes flags: 0
devicetree = separate
arch_number = 0x0000000000000000
TLB addr = 0x00000000ffff0000
irq_sp = 0x00000000fde9ab80
sp start = 0x00000000fde9ab80
Early malloc usage: 2990 / 8000
=> ls mmc 0:1
** Bad device specification mmc 0 **
Couldn't find partition mmc 0:1
=> ls mmc 1:1
EFI/
21582336 Image
268978 sysfw.itb
268978 sysfw-j721e-gp-evm.itb
278254 sysfw-j721e_sr1_1-hs-evm.itb
269718 sysfw-j721e_sr2-hs-fs-evm.itb
294385 tiboot3.bin
294385 tiboot3-j721e-gp-evm.bin
295160 tiboot3-j721e_sr1_1-hs-evm.bin
295160 tiboot3-j721e_sr2-hs-fs-evm.bin
1077291 tispl.bin
1319011 u-boot.img
574 uEnv.txt
4 ws-calibrate.rules
13 file(s), 1 dir(s)
=> ext4ls mmc 0:2 /lib/firmware
** Bad device specification mmc 0 **
Couldn't find partition mmc 0:2
=> ext4ls mmc 1:2 /lib/firmware
<DIR> 4096 .
<DIR> 4096 ..
2040 LICENCE.ibt_firmware
2046 LICENCE.iwlwifi_firmware
478552 bl32.bin
4295864 bl32.elf
<DIR> 4096 cadence
<DIR> 4096 intel
918268 iwlwifi-3160-17.ucode
2448976 iwlwifi-8000C-34.ucode
2428004 iwlwifi-8000C-36.ucode
2440780 iwlwifi-8265-34.ucode
2436632 iwlwifi-8265-36.ucode
2678092 iwlwifi-9260-th-b0-jf-b0-34.ucode
2521412 iwlwifi-9260-th-b0-jf-b0-38.ucode
1489652 iwlwifi-9260-th-b0-jf-b0-46.ucode
<SYM> 76 j7-c66_0-fw
<SYM> 76 j7-c66_0-fw-sec
<SYM> 76 j7-c66_1-fw
<SYM> 76 j7-c66_1-fw-sec
<SYM> 65 j7-c71_0-fw
<SYM> 72 j7-c71_0-fw-sec
<SYM> 74 j7-mcu-r5f0_0-fw
<SYM> 74 j7-main-r5f0_0-fw-sec
<SYM> 67 j7-main-r5f0_0-fw
<SYM> 74 j7-main-r5f0_1-fw-sec
<SYM> 74 j7-main-r5f1_0-fw
<SYM> 74 j7-main-r5f1_0-fw-sec
<SYM> 74 j7-main-r5f1_1-fw-sec
<SYM> 74 j7-mcu-r5f0_1-fw-sec
<SYM> 49 j7-pru0_0-fw
<SYM> 49 j7-pru0_1-fw
<SYM> 49 j7-pru1_0-fw
<SYM> 49 j7-pru1_1-fw
<SYM> 49 j7-rtu0_0-fw
<SYM> 49 j7-rtu0_1-fw
<SYM> 49 j7-rtu1_0-fw
<SYM> 49 j7-rtu1_1-fw
<SYM> 35 j7-txpru0_0-fw
<SYM> 35 j7-txpru0_1-fw
<SYM> 35 j7-txpru1_0-fw
<SYM> 35 j7-txpru1_1-fw
<DIR> 4096 pru
247469 pvdec_full_bin.fw
4728 regulatory.db
1182 regulatory.db.p7s
131072 rgx.fw.22.104.208.318
131072 rgx.fw.22.104.208.318.64k
382744 rgx.sh.22.104.208.318
28 tee-header_v2.bin
0 tee-pageable_v2.bin
478552 tee-pager_v2.bin
478552 tee-raw.bin
478580 tee.bin
4295864 tee.elf
<DIR> 4096 ti-connectivity
<DIR> 4096 ti-eth
<DIR> 4096 ti-ipc
=> mmc rescan; echo $?
MMC Device 0 not found
no mmc device at slot 0
1
=> fatwrite mmc ${mmcdev}:1 ${loadaddr} ws-calibrate.rules 4
4 bytes written in 22 ms (0 Bytes/s)
=> boot
## Checking Image at 82000000 ...
Unknown image format!
## Flattened Device Tree blob at 88000000
Booting using the fdt blob at 0x88000000
Working FDT set to 88000000
Loading Device Tree to 000000008ffdf000, end 000000008ffff061 ... OK
Working FDT set to 8ffdf000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd080]
[ 0.000000] Linux version 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 (a0497641@a0497641-HP-Z2-Tower-G9-Workstation-Desktop-PC) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024
[ 0.000000] KASLR disabled due to lack of seed
[ 0.000000] Machine model: Texas Instruments J721E SK
[ 0.000000] earlycon: ns16550a0 at MMIO32 0x0000000002800000 (options '')
[ 0.000000] printk: legacy bootconsole [ns16550a0] enabled
[ 0.000000] efi: UEFI not found.
[ 0.000000] OF: reserved mem: 0x000000009e800000..0x000000009fffffff (24576 KiB) nomap non-reusable optee@9e800000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a0000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0000000..0x00000000a00fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a0000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a0100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a0100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a0100000..0x00000000a0ffffff (15360 KiB) nomap non-reusable r5f-memory@a0100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a1000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1000000..0x00000000a10fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a1000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a1100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a1100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a1100000..0x00000000a1ffffff (15360 KiB) nomap non-reusable r5f-memory@a1100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a2000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2000000..0x00000000a20fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a2000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a2100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a2100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a2100000..0x00000000a2ffffff (15360 KiB) nomap non-reusable r5f-memory@a2100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a3000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3000000..0x00000000a30fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a3000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a3100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a3100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a3100000..0x00000000a3ffffff (15360 KiB) nomap non-reusable r5f-memory@a3100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a4000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4000000..0x00000000a40fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a4000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a4100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a4100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a4100000..0x00000000a4ffffff (15360 KiB) nomap non-reusable r5f-memory@a4100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-dma-memory@a5000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5000000..0x00000000a50fffff (1024 KiB) nomap non-reusable r5f-dma-memory@a5000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a5100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node r5f-memory@a5100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a5100000..0x00000000a5ffffff (15360 KiB) nomap non-reusable r5f-memory@a5100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a6000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6000000..0x00000000a60fffff (1024 KiB) nomap non-reusable c66-dma-memory@a6000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a6100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a6100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a6100000..0x00000000a6ffffff (15360 KiB) nomap non-reusable c66-memory@a6100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c66-dma-memory@a7000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7000000..0x00000000a70fffff (1024 KiB) nomap non-reusable c66-dma-memory@a7000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a7100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c66-memory@a7100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a7100000..0x00000000a7ffffff (15360 KiB) nomap non-reusable c66-memory@a7100000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8000000, size 1 MiB
[ 0.000000] OF: reserved mem: initialized node c71-dma-memory@a8000000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8000000..0x00000000a80fffff (1024 KiB) nomap non-reusable c71-dma-memory@a8000000
[ 0.000000] Reserved memory: created DMA memory pool at 0x00000000a8100000, size 15 MiB
[ 0.000000] OF: reserved mem: initialized node c71-memory@a8100000, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x00000000a8100000..0x00000000a8ffffff (15360 KiB) nomap non-reusable c71-memory@a8100000
[ 0.000000] OF: reserved mem: 0x00000000aa000000..0x00000000abbfffff (28672 KiB) nomap non-reusable ipc-memories@aa000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x8ff7df9c0-0x8ff7e1fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x00000008ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x000000009e7fffff]
[ 0.000000] node 0: [mem 0x000000009e800000-0x00000000a8ffffff]
[ 0.000000] node 0: [mem 0x00000000a9000000-0x00000000a9ffffff]
[ 0.000000] node 0: [mem 0x00000000aa000000-0x00000000abbfffff]
[ 0.000000] node 0: [mem 0x00000000abc00000-0x00000000ffffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000008ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000008ffffffff]
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000 on node -1
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.4
[ 0.000000] percpu: Embedded 24 pages/cpu s58792 r8192 d31320 u98304
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: GIC system register CPU interface
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096
[ 0.000000] sysrq: sysrq always enabled.
[ 0.000000] Unknown kernel command line parameters "earlyprintk=serial,ttyS2,115200n8", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping off. Total pages: 0
[ 0.000000] Policy zone: Normal
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 2.
[ 0.000000] software IO TLB: mapped [mem 0x00000000fa000000-0x00000000fe000000] (64MB)
[ 0.000000] Memory: 3769072K/4194304K available (16960K kernel code, 4794K rwdata, 11348K rodata, 10048K init, 748K bss, 392464K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] RCU Tasks: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] RCU Tasks Trace: Setting shift to 1 and lim to 1 rcu_task_cb_adjust=1.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv3: 960 SPIs implemented
[ 0.000000] GICv3: 0 Extended SPIs implemented
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GICv3: GICv3 features: 16 PPIs
[ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000001900000
[ 0.000000] ITS [mem 0x01820000-0x0182ffff]
[ 0.000000] GIC: enabling workaround for ITS: Socionext Synquacer pre-ITS
[ 0.000000] ITS@0x0000000001820000: Devices Table too large, reduce ids 20->19
[ 0.000000] ITS@0x0000000001820000: allocated 524288 Devices @880400000 (flat, esz 8, psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GICv3: using LPI property table @0x0000000880040000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000000880050000
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 200.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0x3ffffffffffffff max_cycles: 0x2e2049d3e8, max_idle_ns: 440795210634 ns
[ 0.000000] sched_clock: 58 bits at 200MHz, resolution 5ns, wraps every 4398046511102ns
[ 0.009609] Console: colour dummy device 80x25
[ 0.014201] Calibrating delay loop (skipped), value calculated using timer frequency.. 400.00 BogoMIPS (lpj=800000)
[ 0.024874] pid_max: default: 32768 minimum: 301
[ 0.029621] LSM: initializing lsm=capability
[ 0.034036] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.041606] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
[ 0.050603] rcu: Hierarchical SRCU implementation.
[ 0.055516] rcu: Max phase no-delay instances is 1000.
[ 0.061099] Platform MSI: msi-controller@1820000 domain created
[ 0.067355] PCI/MSI: /bus@100000/interrupt-controller@1800000/msi-controller@1820000 domain created
[ 0.076693] fsl-mc MSI: msi-controller@1820000 domain created
[ 0.084468] EFI services will not be available.
[ 0.089207] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
[ 0.102425] Detected PIPT I-cache on CPU1
[ 0.102472] GICv3: CPU1: found redistributor 1 region 0:0x0000000001920000
[ 0.102485] GICv3: CPU1: using allocated LPI pending table @0x0000000880060000
[ 0.102517] CPU1: Booted secondary processor 0x0000000001 [0x411fd080]
[ 0.102594] smp: Brought up 1 node, 2 CPUs
[ 0.131942] SMP: Total of 2 processors activated.
[ 0.136746] CPU: All CPU(s) started at EL2
[ 0.140946] CPU features: detected: 32-bit EL0 Support
[ 0.146195] CPU features: detected: 32-bit EL1 Support
[ 0.151443] CPU features: detected: CRC32 instructions
[ 0.156708] alternatives: applying system-wide alternatives
[ 0.163624] devtmpfs: initialized
[ 0.173833] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.183832] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[ 0.191303] pinctrl core: initialized pinctrl subsystem
[ 0.198408] DMI not present or invalid.
[ 0.203863] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.210365] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations
[ 0.217679] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.225724] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.233850] audit: initializing netlink subsys (disabled)
[ 0.239458] audit: type=2000 audit(0.152:1): state=initialized audit_enabled=0 res=1
[ 0.240491] thermal_sys: Registered thermal governor 'step_wise'
[ 0.247388] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.253566] cpuidle: using governor menu
[ 0.264357] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.271321] ASID allocator initialised with 65536 entries
[ 0.278187] Serial: AMBA PL011 UART driver
[ 0.300171] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000
[ 0.309314] platform a000000.dp-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000
[ 0.318157] platform 4a00000.dss: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000
[ 0.329617] platform a000000.dp-bridge: Fixed dependency cycle(s) with /connector
[ 0.337316] platform connector: Fixed dependency cycle(s) with /bus@100000/dp-bridge@a000000
[ 0.346350] platform hdmi-connector: Fixed dependency cycle(s) with /dvi-bridge
[ 0.353855] platform 4a00000.dss: Fixed dependency cycle(s) with /dvi-bridge
[ 0.361082] platform dvi-bridge: Fixed dependency cycle(s) with /hdmi-connector
[ 0.368588] platform dvi-bridge: Fixed dependency cycle(s) with /bus@100000/dss@4a00000
[ 0.377137] Modules: 21728 pages in range for non-PLT usage
[ 0.377142] Modules: 513248 pages in range for PLT usage
[ 0.383293] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.395656] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page
[ 0.402058] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages
[ 0.408992] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page
[ 0.415394] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.422327] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page
[ 0.428729] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages
[ 0.435662] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page
[ 0.442298] Demotion targets for Node 0: null
[ 0.447540] ACPI: Interpreter disabled.
[ 0.453012] k3-chipinfo 43000014.chipid: Family:J721E rev:SR1.1 JTAGID[0x1bb6402f] Detected
[ 0.462123] iommu: Default domain type: Translated
[ 0.467027] iommu: DMA domain TLB invalidation policy: strict mode
[ 0.473489] SCSI subsystem initialized
[ 0.477483] usbcore: registered new interface driver usbfs
[ 0.483103] usbcore: registered new interface driver hub
[ 0.488543] usbcore: registered new device driver usb
[ 0.494414] pps_core: LinuxPPS API ver. 1 registered
[ 0.499488] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.508826] PTP clock support registered
[ 0.512929] EDAC MC: Ver: 3.0.0
[ 0.516622] scmi_core: SCMI protocol bus registered
[ 0.522403] FPGA manager framework
[ 0.525920] Advanced Linux Sound Architecture Driver Initialized.
[ 0.532635] vgaarb: loaded
[ 0.535672] clocksource: Switched to clocksource arch_sys_counter
[ 0.542027] VFS: Disk quotas dquot_6.6.0
[ 0.546049] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.553164] pnp: PnP ACPI: disabled
[ 0.559970] NET: Registered PF_INET protocol family
[ 0.565099] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.574029] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
[ 0.582799] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.590724] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.598928] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
[ 0.607419] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.614198] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.621112] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.628545] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.634642] RPC: Registered named UNIX socket transport module.
[ 0.640703] RPC: Registered udp transport module.
[ 0.645507] RPC: Registered tcp transport module.
[ 0.650310] RPC: Registered tcp-with-tls transport module.
[ 0.655920] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.662509] PCI: CLS 0 bytes, default 64
[ 0.668150] kvm [1]: nv: 477 coarse grained trap handlers
[ 0.673826] kvm [1]: IPA Size Limit: 44 bits
[ 0.679113] kvm [1]: vgic-v2@6f020000
[ 0.682871] kvm [1]: GIC system register CPU interface enabled
[ 0.688851] kvm [1]: vgic interrupt IRQ9
[ 0.692870] kvm [1]: Hyp mode (nVHE) initialized successfully
[ 0.699481] Initialise system trusted keyrings
[ 0.704155] workingset: timestamp_bits=42 max_order=20 bucket_order=0
[ 0.710905] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.717012] NFS: Registering the id_resolver key type
[ 0.722199] Key type id_resolver registered
[ 0.726471] Key type id_legacy registered
[ 0.730572] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.737421] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 0.745062] 9p: Installing v9fs 9p2000 file system support
[ 0.772019] Key type asymmetric registered
[ 0.776203] Asymmetric key parser 'x509' registered
[ 0.781216] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 0.788778] io scheduler mq-deadline registered
[ 0.793404] io scheduler kyber registered
[ 0.797518] io scheduler bfq registered
[ 0.807872] pinctrl-single 4301c000.pinctrl: 94 pins, size 376
[ 0.814239] pinctrl-single 11c000.pinctrl: 173 pins, size 692
[ 0.820574] pinctrl-single 104200.pinctrl: 20 pins, size 80
[ 0.826340] pinctrl-single 104280.pinctrl: 8 pins, size 32
[ 0.858643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.867351] msm_serial: driver initialized
[ 0.871817] SuperH (H)SCI(F) driver initialized
[ 0.876567] STM32 USART driver initialized
[ 0.882492] arm-smmu-v3 36600000.iommu: ias 48-bit, oas 48-bit (features 0x00001faf)
[ 0.890678] arm-smmu-v3 36600000.iommu: allocated 65536 entries for cmdq
[ 0.897715] arm-smmu-v3 36600000.iommu: allocated 32768 entries for evtq
[ 0.905373] arm-smmu-v3 36600000.iommu: msi_domain absent - falling back to wired irqs
[ 0.916549] loop: module loaded
[ 0.920590] megasas: 07.727.03.00-rc1
[ 0.928846] tun: Universal TUN/TAP device driver, 1.6
[ 0.934765] thunder_xcv, ver 1.0
[ 0.938092] thunder_bgx, ver 1.0
[ 0.941400] nicpf, ver 1.0
[ 0.945054] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 0.952441] hns3: Copyright (c) 2017 Huawei Corporation.
[ 0.957883] hclge is initializing
[ 0.961288] e1000: Intel(R) PRO/1000 Network Driver
[ 0.966270] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.972159] e1000e: Intel(R) PRO/1000 Network Driver
[ 0.977230] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.983287] igb: Intel(R) Gigabit Ethernet Network Driver
[ 0.988805] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 0.994510] igbvf: Intel(R) Gigabit Virtual Function Network Driver
[ 1.000920] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.007255] sky2: driver version 1.30
[ 1.012076] VFIO - User Level meta-driver version: 0.3
[ 1.019461] usbcore: registered new interface driver usb-storage
[ 1.027709] i2c_dev: i2c /dev entries driver
[ 1.037253] sdhci: Secure Digital Host Controller Interface driver
[ 1.043594] sdhci: Copyright(c) Pierre Ossman
[ 1.048605] Synopsys Designware Multimedia Card Interface Driver
[ 1.055444] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.062646] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.069315] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 1.076673] usbcore: registered new interface driver usbhid
[ 1.082375] usbhid: USB HID core driver
[ 1.088739] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.098642] optee: probing for conduit method.
I/TC: Reserved shared memory is enabled
I/TC: Dynamic shared memory is enabled
I/TC: Normal World virtualization support is disabled
I/TC: Asynchronous notifications are disabled
[ 1.103212] optee: revision 4.1 (012cdca4)
[ 1.119677] optee: dynamic shared memory is enabled
[ 1.129296] random: crng init done
[ 1.132831] optee: initialized driver
[ 1.139765] NET: Registered PF_PACKET protocol family
[ 1.144985] 9pnet: Installing 9P2000 support
[ 1.149384] Key type dns_resolver registered
[ 1.158145] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 1.166485] registered taskstats version 1
[ 1.170729] Loading compiled-in X.509 certificates
[ 1.192919] ti-sci 44083000.system-controller: ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)')
[ 1.334356] omap_i2c 42120000.i2c: bus 0 rev0.12 at 400 kHz
[ 1.340946] pca954x 1-0071: supply vdd not found, using dummy regulator
[ 1.371853] i2c i2c-1: Added multiplexed i2c bus 2
[ 1.376851] i2c i2c-1: Added multiplexed i2c bus 3
[ 1.381751] pca954x 1-0071: registered 2 multiplexed busses for I2C switch pca9543
[ 1.389517] omap_i2c 2000000.i2c: bus 1 rev0.12 at 400 kHz
[ 1.395869] omap_i2c 2010000.i2c: bus 4 rev0.12 at 100 kHz
[ 1.402330] pca954x 5-0070: supply vdd not found, using dummy regulator
[ 1.431877] i2c i2c-5: Added multiplexed i2c bus 6
[ 1.436875] i2c i2c-5: Added multiplexed i2c bus 7
[ 1.441776] pca954x 5-0070: registered 2 multiplexed busses for I2C switch pca9543
[ 1.449546] omap_i2c 2030000.i2c: bus 5 rev0.12 at 400 kHz
[ 1.455908] omap_i2c 2050000.i2c: bus 8 rev0.12 at 400 kHz
[ 1.461874] ti-sci-intr 42200000.interrupt-controller: Interrupt Router 137 domain created
[ 1.470568] ti-sci-intr bus@100000:interrupt-controller@a00000: Interrupt Router 131 domain created
[ 1.480051] ti-sci-intr 310e0000.interrupt-controller: Interrupt Router 213 domain created
[ 1.488828] ti-sci-inta 33d00000.interrupt-controller: Interrupt Aggregator domain 209 created
[ 1.500591] k3-ringacc 2b800000.ringacc: Ring Accelerator probed rings:286, gp-rings[96,20] sci-dev-id:235
[ 1.510495] k3-ringacc 2b800000.ringacc: dma-ring-reset-quirk: disabled
[ 1.517262] k3-ringacc 2b800000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.527442] k3-ringacc 3c000000.ringacc: Ring Accelerator probed rings:1024, gp-rings[440,150] sci-dev-id:211
[ 1.537626] k3-ringacc 3c000000.ringacc: dma-ring-reset-quirk: disabled
[ 1.544390] k3-ringacc 3c000000.ringacc: RA Proxy rev. 66346100, num_proxies:64
[ 1.553201] 40a00000.serial: ttyS1 at MMIO 0x40a00000 (irq = 213, base_baud = 6000000) is a 8250
[ 1.563577] 2800000.serial: ttyS2 at MMIO 0x2800000 (irq = 214, base_baud = 3000000) is a 8250
[ 1.572519] printk: legacy console [ttyS2] enabled
[ 1.572519] printk: legacy console [ttyS2] enabled
[ 1.582204] printk: legacy bootconsole [ns16550a0] disabled
[ 1.582204] printk: legacy bootconsole [ns16550a0] disabled
[ 1.597049] 2810000.serial: ttyS3 at MMIO 0x2810000 (irq = 215, base_baud = 3000000) is a 8250
[ 1.609274] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.655677] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.665118] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.673389] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 1.686204] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.693412] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.712409] ti-udma 285c0000.dma-controller: Channels: 26 (tchan: 13, rchan: 13, gp-rflow: 8)
[ 1.724173] ti-udma 31150000.dma-controller: Channels: 122 (tchan: 61, rchan: 61, gp-rflow: 16)
[ 1.739581] 8 fixed-partitions partitions found on MTD device 47040000.spi.0
[ 1.746701] Creating 8 MTD partitions on "47040000.spi.0":
[ 1.752180] 0x000000000000-0x000000080000 : "ospi.tiboot3"
[ 1.758234] 0x000000080000-0x000000280000 : "ospi.tispl"
[ 1.764021] 0x000000280000-0x000000680000 : "ospi.u-boot"
[ 1.769897] 0x000000680000-0x0000006c0000 : "ospi.env"
[ 1.775478] 0x0000006c0000-0x0000007c0000 : "ospi.sysfw"
[ 1.781263] 0x0000007c0000-0x000000800000 : "ospi.env.backup"
[ 1.787456] 0x000000800000-0x000003fc0000 : "ospi.rootfs"
[ 1.793295] 0x000003fc0000-0x000004000000 : "ospi.phypattern"
[ 1.801499] davinci_mdio 46000f00.mdio: Configuring MDIO in manual mode
[ 1.847678] davinci_mdio 46000f00.mdio: davinci mdio revision 9.7, bus freq 1000000
[ 1.857108] davinci_mdio 46000f00.mdio: phy[0]: device 46000f00.mdio:00, driver TI DP83867
[ 1.865380] am65-cpsw-nuss 46000000.ethernet: initializing am65 cpsw nuss version 0x6BA00101, cpsw version 0x6BA80100 Ports: 2 quirks:00000000
[ 1.878196] am65-cpsw-nuss 46000000.ethernet: initialized cpsw ale version 1.4
[ 1.885405] am65-cpsw-nuss 46000000.ethernet: ALE Table size 64
[ 1.897375] am65-cpsw-nuss 46000000.ethernet: set new flow-id-base 48
[ 1.907506] mmc1: CQHCI version 5.10
[ 1.950243] mmc1: SDHCI controller on 4fb0000.mmc [4fb0000.mmc] using ADMA 64-bit
[ 1.965516] am65-cpsw-nuss 46000000.ethernet eth0: PHY [46000f00.mdio:00] driver [TI DP83867] (irq=POLL)
[ 1.974999] am65-cpsw-nuss 46000000.ethernet eth0: configuring for phy/rgmii-rxid link mode
[ 2.009986] mmc1: new ultra high speed DDR50 SDHC card at address aaaa
[ 2.016893] mmcblk1: mmc1:aaaa SC16G 14.8 GiB
[ 2.025500] mmcblk1: p1 p2 p3
[ 6.085351] am65-cpsw-nuss 46000000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.111674] Sending DHCP requests ., OK
[ 6.171516] IP-Config: Got DHCP answer from 10.24.72.2, my address is 10.24.72.113
[ 6.179076] IP-Config: Complete:
[ 6.182304] device=eth0, hwaddr=24:76:25:96:41:a1, ipaddr=10.24.72.113, mask=255.255.254.0, gw=10.24.72.1
[ 6.192304] host=dhcp-10-24-72-113, domain=dhcp.ti.com, nis-domain=(none)
[ 6.199514] bootserver=0.0.0.0, rootserver=10.24.68.106, rootpath=
[ 6.199518] nameserver0=192.0.2.2, nameserver1=192.0.2.3
[ 6.211994] clk: Disabling unused clocks
[ 6.236381] PM: genpd: Disabling unused power domains
[ 6.241519] ALSA device list:
[ 6.244539] No soundcards found.
[ 6.256113] VFS: Mounted root (nfs filesystem) on device 0:22.
[ 6.262181] devtmpfs: mounted
[ 6.270001] Freeing unused kernel memory: 10048K
[ 6.274756] Run /sbin/init as init process
[ 6.417204] systemd[1]: System time before build time, advancing clock.
[ 6.448219] systemd[1]: systemd 250.5+ running in system mode (+PAM -AUDIT -SELINUX -APPARMOR +IMA -SMACK +SECCOMP -GCRYPT -GNUTLS -OPENSSL +ACL +BLKID -CURL -ELFUTILS -FIDO2 -IDN2 -IDN -IPTC +KMOD -LIBCRYPTSETUP +LIBFDISK -PCRE2 -PWQUALITY -P11KIT -QRENCODE -BZIP2 -LZ4 -XZ -ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=hybrid)
[ 6.479709] systemd[1]: Detected architecture arm64.
Welcome to [1mArago 2023.10[0m!
[ 6.540575] systemd[1]: Hostname set to <j721e-evm>.
[ 6.650866] systemd-sysv-generator[85]: SysV service '/etc/init.d/thermal-zone-init' lacks a native systemd unit file. Automatically generating a unit file for compatibility. Please update package to include a native systemd unit file, in order to make it more safe and robust.
[ 6.679147] systemd[76]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
[ 6.871304] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.880200] systemd[1]: Binding to IPv6 address not available since kernel does not support IPv6.
[ 6.911693] systemd[1]: /lib/systemd/system/bt-enable.service:9: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 6.967533] systemd[1]: /etc/systemd/system/sync-clocks.service:11: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[ 7.034181] systemd[1]: Queued start job for default target Graphical Interface.
[ 7.072115] systemd[1]: Created slice Slice /system/getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/getty[0m.
[ 7.092988] systemd[1]: Created slice Slice /system/modprobe.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/modprobe[0m.
[ 7.116978] systemd[1]: Created slice Slice /system/serial-getty.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/serial-getty[0m.
[ 7.140732] systemd[1]: Created slice User and Session Slice.
[[0;32m OK [0m] Created slice [0;1;39mUser and Session Slice[0m.
[ 7.163878] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[[0;32m OK [0m] Started [0;1;39mDispatch Password ts to Console Directory Watch[0m.
[ 7.187819] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[[0;32m OK [0m] Started [0;1;39mForward Password Ruests to Wall Directory Watch[0m.
[ 7.211877] systemd[1]: Reached target Path Units.
[[0;32m OK [0m] Reached target [0;1;39mPath Units[0m.
[ 7.227745] systemd[1]: Reached target Remote File Systems.
[[0;32m OK [0m] Reached target [0;1;39mRemote File Systems[0m.
[ 7.247730] systemd[1]: Reached target Slice Units.
[[0;32m OK [0m] Reached target [0;1;39mSlice Units[0m.
[ 7.263734] systemd[1]: Reached target Swaps.
[[0;32m OK [0m] Reached target [0;1;39mSwaps[0m.
[ 7.298513] systemd[1]: Listening on RPCbind Server Activation Socket.
[[0;32m OK [0m] Listening on [0;1;39mRPCbind Server Activation Socket[0m.
[ 7.323812] systemd[1]: Reached target RPC Port Mapper.
[[0;32m OK [0m] Reached target [0;1;39mRPC Port Mapper[0m.
[ 7.347940] systemd[1]: Listening on Process Core Dump Socket.
[[0;32m OK [0m] Listening on [0;1;39mProcess Core Dump Socket[0m.
[ 7.367913] systemd[1]: Listening on initctl Compatibility Named Pipe.
[[0;32m OK [0m] Listening on [0;1;39minitctl Compatibility Named Pipe[0m.
[ 7.392510] systemd[1]: Listening on Journal Audit Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Audit Socket[0m.
[ 7.412425] systemd[1]: Listening on Journal Socket (/dev/log).
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket (/dev/log)[0m.
[ 7.436043] systemd[1]: Listening on Journal Socket.
[[0;32m OK [0m] Listening on [0;1;39mJournal Socket[0m.
[ 7.452455] systemd[1]: Listening on Network Service Netlink Socket.
[[0;32m OK [0m] Listening on [0;1;39mNetwork Service Netlink Socket[0m.
[ 7.477399] systemd[1]: Listening on udev Control Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Control Socket[0m.
[ 7.499965] systemd[1]: Listening on udev Kernel Socket.
[[0;32m OK [0m] Listening on [0;1;39mudev Kernel Socket[0m.
[ 7.520375] systemd[1]: Listening on User Database Manager Socket.
[[0;32m OK [0m] Listening on [0;1;39mUser Database Manager Socket[0m.
[ 7.563979] systemd[1]: Mounting Huge Pages File System...
Mounting [0;1;39mHuge Pages File System[0m...
[ 7.582122] systemd[1]: Mounting POSIX Message Queue File System...
Mounting [0;1;39mPOSIX Message Queue File System[0m...
[ 7.612055] systemd[1]: Mounting Kernel Debug File System...
Mounting [0;1;39mKernel Debug File System[0m...
[ 7.627933] systemd[1]: Kernel Trace File System was skipped because of a failed condition check (ConditionPathExists=/sys/kernel/tracing).
[ 7.644052] systemd[1]: Mounting Temporary Directory /tmp...
Mounting [0;1;39mTemporary Directory /tmp[0m...
[ 7.659948] systemd[1]: Create List of Static Device Nodes was skipped because of a failed condition check (ConditionFileNotEmpty=/lib/modules/6.9.0-rc1-next-20240326-00005-g5b564084f3b5/modules.devname).
[ 7.680553] systemd[1]: Starting Load Kernel Module configfs...
Starting [0;1;39mLoad Kernel Module configfs[0m...
[ 7.698011] systemd[1]: Starting Load Kernel Module drm...
Starting [0;1;39mLoad Kernel Module drm[0m...
[ 7.718048] systemd[1]: Starting Load Kernel Module fuse...
Starting [0;1;39mLoad Kernel Module fuse[0m...
[ 7.739265] systemd[1]: Starting Start psplash boot splash screen...
Starting [0;1;39mStart psplash boot splash screen[0m...
[ 7.776148] systemd[1]: Starting RPC Bind...
Starting [0;1;39mRPC Bind[0m...
[ 7.796947] systemd[1]: File System Check on Root Device was skipped because of a failed condition check (ConditionPathIsReadWrite=!/).
[ 7.814459] systemd[1]: Starting Journal Service...
Starting [0;1;39mJournal Service[0m...
[ 7.830801] systemd[1]: Starting Load Kernel Modules...
Starting [0;1;39mLoad Kernel Modules[0m...
[ 7.855572] systemd[1]: Starting Generate network units from Kernel command line...
Starting [0;1;39mGenerate network ts from Kernel command line[0m...
[ 7.896237] systemd[1]: Starting Remount Root and Kernel File Systems...
Starting [0;1;39mRemount Root and Kernel File Systems[0m...
[ 7.924209] systemd[1]: Starting Coldplug All udev Devices...
Starting [0;1;39mColdplug All udev Devices[0m...
[ 7.943502] systemd[1]: Started RPC Bind.
[[0;32m OK [0m] Started [0;1;39mRPC Bind[0m.
[ 7.960133] systemd[1]: Started Journal Service.
[[0;32m OK [0m] Started [0;1;39mJournal Service[0m.
[[0;32m OK [0m] Mounted [0;1;39mHuge Pages File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mPOSIX Message Queue File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mKernel Debug File System[0m.
[[0;32m OK [0m] Mounted [0;1;39mTemporary Directory /tmp[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module configfs[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module drm[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad Kernel Module fuse[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mStart psplash boot splash screen[0m.
See 'systemctl status psplash-start.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mStarprogress communication helper[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mLoad Kernel Modules[0m.
See 'systemctl status systemd-modules-load.service' for details.
[[0;32m OK [0m] Finished [0;1;39mGenerate network units from Kernel command line[0m.
[[0;32m OK [0m] Finished [0;1;39mRemount Root and Kernel File Systems[0m.
Mounting [0;1;39mKernel Configuration File System[0m...
Starting [0;1;39mFlush Journal to Persistent Storage[0m...
[ 8.282076] systemd-journald[98]: Received client request to flush runtime journal.
Starting [0;1;39mApply Kernel Variables[0m...
Starting [0;1;39mCreate Static Device Nodes in /dev[0m...
[[0;32m OK [0m] Mounted [0;1;39mKernel Configuration File System[0m.
[[0;32m OK [0m] Finished [0;1;39mFlush Journal to Persistent Storage[0m.
[[0;32m OK [0m] Finished [0;1;39mApply Kernel Variables[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Static Device Nodes in /dev[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Local File Systems[0m.
Mounting [0;1;39m/media/ram[0m...
Mounting [0;1;39m/var/volatile[0m...
[ 8.493986] audit: type=1334 audit(1651167747.072:2): prog-id=5 op=LOAD
[ 8.501004] audit: type=1334 audit(1651167747.080:3): prog-id=6 op=LOAD
Starting [0;1;39mRule-based Managefor Device Events and Files[0m...
[[0;32m OK [0m] Finished [0;1;39mColdplug All udev Devices[0m.
[[0;32m OK [0m] Mounted [0;1;39m/media/ram[0m.
[[0;32m OK [0m] Mounted [0;1;39m/var/volatile[0m.
Starting [0;1;39mLoad/Save Random Seed[0m...
[[0;32m OK [0m] Reached target [0;1;39mLocal File Systems[0m.
Starting [0;1;39mCreate Volatile Files and Directories[0m...
[[0;32m OK [0m] Started [0;1;39mRule-based Manager for Device Events and Files[0m.
[[0;32m OK [0m] Finished [0;1;39mLoad/Save Random Seed[0m.
[[0;32m OK [0m] Finished [0;1;39mCreate Volatile Files and Directories[0m.
Starting [0;1;39mNetwork Time Synchronization[0m...
Starting [0;1;39mRecord System Boot/Shutdown in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord System Boot/Shutdown in UTMP[0m.
[ 9.039210] systemd-journald[98]: Oldest entry in /run/log/journal/2606416f99424be99515f483f51370bf/system.journal is older than the configured file retention duration (1month), suggesting rotation.
[[0;32m OK [0m] Started [0;1;39mNetwork Time Synchronization[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Initializatio[ 9.076525] systemd-journald[98]: /run/log/journal/2606416f99424be99515f483f51370bf/system.journal: Journal header limits reached or header out-of-date, rotating.
n[0m.
[[0;32m OK [0m] Started [0;1;39mDaily Cleanup of Temporary Directories[0m.
[[0;32m OK [0m] Reached target [0;1;39mSystem Time Set[0m.
[[0;32m OK [0m] Started [0;1;39mDaily rotation of log files[0m.
[[0;32m OK [0m] Reached target [0;1;39mTimer Units[0m.
[[0;32m OK [0m] Listening on [0;1;39mAvahi mDNS/DNS-SD Stack Activation Socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mD-Bus System Message Bus Socket[0m.
Starting [0;1;39mDocker Socket for the API[0m...
[[0;32m OK [0m] Listening on [0;1;39mdropbear.socket[0m.
[[0;32m OK [0m] Listening on [0;1;39mPC/SC Smart Card Daemon Activation Socket[0m.
Starting [0;1;39mWeston socket[0m...
Starting [0;1;39mD-Bus System Message Bus[0m...
Starting [0;1;39mReboot and dump vmcore via kexec[0m...
[[0;32m OK [0m] Listening on [0;1;39mDocker Socket for the API[0m.
[[0;32m OK [0m] Listening on [0;1;39mWeston socket[0m.
[[0;32m OK [0m] Reached target [0;1;39mSocket Units[0m.
[[0;32m OK [0m] Finished [0;1;39mReboot and dump vmcore via kexec[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/ttyS2[0m.
[[0;32m OK [0m] Started [0;1;39mD-Bus System Message Bus[0m.
[[0;32m OK [0m] Reached target [0;1;39mBasic System[0m.
[[0;32m OK [0m] Started [0;1;39mJob spooling tools[0m.
[[0;32m OK [0m] Started [0;1;39mPeriodic Command Scheduler[0m.
Starting [0;1;39mPrint notice about GPLv3 packages[0m...
Starting [0;1;39mIPv6 Packet Filtering Framework[0m...
Starting [0;1;39mIPv4 Packet Filtering Framework[0m...
[[0;32m OK [0m] Started [0;1;39mirqbalance daemon[0m.
Starting [0;1;39mLighttpd Daemon[0m...
[[0;32m OK [0m] Started [0;1;39mstrongSwan IPsec IIKEv2 daemon using ipsec.conf[0m.
[ 9.674633] audit: type=1334 audit(1712764403.693:4): prog-id=7 op=LOAD
[ 9.687541] audit: type=1334 audit(1712764403.705:5): prog-id=8 op=LOAD
Starting [0;1;39mUser Login Management[0m...
[[0;32m OK [0m] Started [0;1;39mTEE Supplicant[0m.
Starting [0;1;39mTelnet Server[0m...
Starting [0;1;39mRotate log files[0m...
[[0;32m OK [0m] Finished [0;1;39mIPv6 Packet Filtering Framework[0m.
[[0;32m OK [0m] Finished [0;1;39mIPv4 Packet Filtering Framework[0m.
[[0;32m OK [0m] Reached target [0;1;39mPreparation for Network[0m.
Starting [0;1;39mNetwork Configuration[0m...
[[0;32m OK [0m] Finished [0;1;39mTelnet Server[0m.
[[0;32m OK [0m] Started [0;1;39mLighttpd Daemon[0m.
[[0;32m OK [0m] Started [0;1;39mUser Login Management[0m.
[[0;32m OK [0m] Finished [0;1;39mRotate log files[0m.
[[0;32m OK [0m] Started [0;1;39mNetwork Configuration[0m.
Starting [0;1;39mNetwork Name Resolution[0m...
[[0;32m OK [0m] Started [0;1;39mNetwork Name Resolution[0m.
[[0;32m OK [0m] Reached target [0;1;39mNetwork[0m.
[[0;32m OK [0m] Reached target [0;1;39mHost and Network Name Lookups[0m.
Starting [0;1;39mAvahi mDNS/DNS-SD Stack[0m...
Starting [0;1;39mEnable and configure wl18xx bluetooth stack[0m...
Starting [0;1;39mcontainerd container runtime[0m...
[[0;32m OK [0m] Started [0;1;39mNetperf Benchmark Server[0m.
[[0;32m OK [0m] Started [0;1;39mNFS status monitor for NFSv2/3 locking.[0m.
Starting [0;1;39mPermit User Sessions[0m...
[[0;32m OK [0m] Finished [0;1;39mPermit User Sessions[0m.
[[0;32m OK [0m] Started [0;1;39mGetty on tty1[0m.
[[0;32m OK [0m] Started [0;1;39mSerial Getty on ttyS2[0m.
[[0;32m OK [0m] Reached target [0;1;39mLogin Prompts[0m.
Starting [0;1;39mSynchronize System and HW clocks[0m...
Starting [0;1;39mWeston, a Waylandositor, as a system service[0m...
[[0;32m OK [0m] Started [0;1;39mAvahi mDNS/DNS-SD Stack[0m.
[[0;32m OK [0m] Finished [0;1;39mEnable and configure wl18xx bluetooth stack[0m.
[[0;1;31mFAILED[0m] Failed to start [0;1;39mSynchronize System and HW clocks[0m.
See 'systemctl status sync-clocks.service' for details.
[ 11.190478] audit: type=1334 audit(1712764405.209:6): prog-id=9 op=LOAD
[ 11.206456] audit: type=1334 audit(1712764405.221:7): prog-id=10 op=LOAD
Starting [0;1;39mUser Database Manager[0m...
[[0;32m OK [0m] Started [0;1;39mUser Database Manager[0m.
[[0;32m OK [0m] Created slice [0;1;39mUser Slice of UID 1000[0m.
Starting [0;1;39mUser Runtime Directory /run/user/1000[0m...
[[0;32m OK [0m] Finished [0;1;39mUser Runtime Directory /run/user/1000[0m.
Starting [0;1;39mUser Manager for UID 1000[0m...
[ 11.734754] audit: type=1006 audit(1712764405.753:8): pid=392 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[ 11.747793] audit: type=1300 audit(1712764405.753:8): arch=c00000b7 syscall=64 success=yes exit=4 a0=8 a1=ffffca822788 a2=4 a3=0 items=0 ppid=1 pid=392 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=1 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 11.773693] audit: type=1327 audit(1712764405.753:8): proctitle="(systemd)"
[[0;32m OK [0m] Started [0;1;39mUser Manager for UID 1000[0m.
[[0;32m OK [0m] Started [0;1;39mSession c1 of User weston[0m.
[[0;32m OK [0m] Started [0;1;39mcontainerd container runtime[0m.
[ 12.290407] audit: type=1006 audit(1712764406.309:9): pid=345 uid=0 old-auid=4294967295 auid=1000 tty=tty7 old-ses=4294967295 ses=2 res=1
[[0;1;31mFAILED[0m] Failed to start [0;1;39mWeston, a mpositor, as a system service[0m.
See 'systemctl status weston.service' for details.
[[0;1;38;5;185mDEPEND[0m] Dependency failed for [0;1;39mMatrix GUI[0m.
[[0;32m OK [0m] Created slice [0;1;39mSlice /system/systemd-fsck[0m.
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p3[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk1p3[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p3[0m.
Mounting [0;1;39m/run/media/mmcblk1p3[0m...
[ 13.222008] EXT4-fs (mmcblk1p3): mounting ext3 file system using the ext4 subsystem
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p2[0m.[ 13.255226] EXT4-fs (mmcblk1p3): mounted filesystem 65f8f258-64a5-45fd-8ac2-bf8b60c830e2 r/w with ordered data mode. Quota mode: none.
Starting [0;1;39mFile System Check on /dev/mmcblk1p2[0m...
[[0;32m OK [0m] Mounted [0;1;39m/run/media/mmcblk1p3[0m.
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p2[0m.
Mounting [0;1;39m/run/media/root-mmcblk1p2[0m...
[[0;32m OK [0m] Found device [0;1;39m/dev/mmcblk1p1[0m.
Starting [0;1;39mFile System Check on /dev/mmcblk1p1[0m...
[[0;32m OK [0m] Finished [0;1;39mFile System Check on /dev/mmcblk1p1[0m.
Mounting [0;1;39m/run/media/boot-mmcblk1p1[0m...
[ 13.377404] EXT4-fs (mmcblk1p2): mounted filesystem 62331353-c8ba-442e-85e0-58340be048a2 r/w with ordered data mode. Quota mode: none.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/root-mmcblk1p2[0m.
[ 13.516748] FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[[0;32m OK [0m] Mounted [0;1;39m/run/media/boot-mmcblk1p1[0m.
***************************************************************
***************************************************************
NOTICE: This file system contains the following GPL-3.0 packages:
adwaita-icon-theme-symbolic
autoconf
bash
bc
binutils
cifs-utils
coreutils-stdbuf
coreutils
cpio
cpp-symlinks
cpp
dosfstools
elfutils
g++-symlinks
g++
gawk
gcc-symlinks
gcc
gdb
gdbserver
gettext
glmark2
gnu-config
grub-common
grub-editenv
grub-efi
gzip
less
libasm1
libatomic-dev
libatomic1
libbfd
libdebuginfod1
libdw1
libelf1
libgcc-s-dev
libgcc1
libgdbm-compat4
libgdbm6
libgettextlib
libgettextsrc
libgmp10
libidn2-0
libmpc3
libmpfr6
libopcodes
libqt5charts-examples
libqt5charts-plugins
libqt5charts-qmlplugins
libqt5charts5
libqt5sensors-plugins
libqt5sensors-qmlplugins
libqt5sensors5
libqt5serialport-examples
libqt5serialport-plugins
libqt5serialport-qmlplugins
libqt5serialport5
libqt5svg-examples
libqt5svg-plugins
libqt5svg-qmlplugins
libqt5svg5
libqt5virtualkeyboard-plugins
libqt5virtualkeyboard-qmlplugins
libqt5virtualkeyboard5
libqt5webchannel-plugins
libqt5webchannel-qmlplugins
libqt5webchannel5
libreadline8
libstdc++-dev
libstdc++6
libunistring2
m4
make
nettle
parted
piglit
qt3d-plugins
qt3d-qmlplugins
qt3d
qtbase-examples
qtbase-plugins
qtbase-qmlplugins
qtbase
qtconnectivity-plugins
qtconnectivity-qmlplugins
qtconnectivity
qtdeclarative-plugins
qtdeclarative-qmlplugins
qtdeclarative-tools
qtdeclarative
qtgraphicaleffects-qmlplugins
qtlocation-examples
qtlocation-plugins
qtlocation-qmlplugins
qtlocation
qtmultimedia-examples
qtmultimedia-plugins
qtmultimedia-qmlplugins
qtmultimedia
qtquics-qmlplugins.control
qtquics2-plugins.control
qtquics2-qmlplugins.control
qtquics2.control
qtscript-examples
qtscript-plugins
qtscript-qmlplugins
qtscript
qtwayland-examples
qtwayland-plugins
qtwayland-qmlplugins
qtwayland
tar
which
If you do not wish to distribute GPL-3.0 components please remove
the above packages prior to distribution. This can be done using
the opkg remove command. i.e.:
opkg remove <package>
Where <package> is the name printed in the list above
NOTE: If the package is a dependency of another package you
will be notified of the dependent packages. You should
use the --force-removal-of-dependent-packages option to
also remove the dependent packages as well
***************************************************************
***************************************************************
[[0;32m OK [0m] Finished [0;1;39mPrint notice about GPLv3 packages[0m.
[[0;32m OK [0m] Reached target [0;1;39mMulti-User System[0m.
[[0;32m OK [0m] Reached target [0;1;39mGraphical Interface[0m.
Starting [0;1;39mRecord Runlevel Change in UTMP[0m...
[[0;32m OK [0m] Finished [0;1;39mRecord Runlevel Change in UTMP[0m.
_____ _____ _ _
| _ |___ ___ ___ ___ | _ |___ ___ |_|___ ___| |_
| | _| .'| . | . | | __| _| . | | | -_| _| _|
|__|__|_| |__,|_ |___| |__| |_| |___|_| |___|___|_|
|___| |___|
Arago Project j721e-evm -
Arago 2023.10 j721e-evm -
j721e-evm login: [ 16.165980] kauditd_printk_skb: 2 callbacks suppressed
[ 16.165989] audit: type=1334 audit(1712764410.185:10): prog-id=11 op=LOAD
[ 16.178025] audit: type=1334 audit(1712764410.197:11): prog-id=12 op=LOAD
root
[ 16.410206] audit: type=1006 audit(1712764410.429:12): pid=921 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=3 res=1
[ 16.422601] audit: type=1300 audit(1712764410.429:12): arch=c00000b7 syscall=64 success=yes exit=1 a0=8 a1=ffffca822788 a2=1 a3=0 items=0 ppid=1 pid=921 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="(systemd)" exe="/lib/systemd/systemd" key=(null)
[ 16.448081] audit: type=1327 audit(1712764410.429:12): proctitle="(systemd)"
[ 16.500257] audit: type=1334 audit(1712764410.521:13): prog-id=13 op=LOAD
[ 16.507416] audit: type=1300 audit(1712764410.521:13): arch=c00000b7 syscall=280 success=yes exit=8 a0=5 a1=ffffe322c7a0 a2=78 a3=0 items=0 ppid=1 pid=921 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
[ 16.533822] audit: type=1327 audit(1712764410.521:13): proctitle="(systemd)"
[ 16.541152] audit: type=1334 audit(1712764410.521:14): prog-id=13 op=UNLOAD
[ 16.548495] audit: type=1300 audit(1712764410.521:14): arch=c00000b7 syscall=57 success=yes exit=0 a0=8 a1=ffffaa33c020 a2=0 a3=ffffaa33c7e0 items=0 ppid=1 pid=921 auid=0 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="systemd" exe="/lib/systemd/systemd" key=(null)
7[r[999;999H[6nroot@j721e-evm:~# uname -a
Linux j721e-evm 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j721e-evm:~# cat /proc/cmdline
console=ttyS2,115200n8 earlyprintk=serial,ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000 rootwait fsck.mode=skip sysrq_always_enabled ip=:::::eth0:dhcp root=/dev/nfs rw nfsroot=10.24.68.106:/opt/NFS_exports/linux/j721e-sk-01/autofs/9ab4afdc69d103bf687bd8e97cc38bdf,nolock,v3,tcp,rsize=4096,wsize=4096
root@j721e-evm:~# uname -a
Linux j721e-evm 6.9.0-rc1-next-20240326-00005-g5b564084f3b5 #1 SMP PREEMPT Wed Apr 10 20:27:40 IST 2024 aarch64 aarch64 aarch64 GNU/Linux
root@j721e-evm:~# cat /proc/mtd
dev: size erasesize name
mtd0: 00080000 00040000 "ospi.tiboot3"
mtd1: 00200000 00040000 "ospi.tispl"
mtd2: 00400000 00040000 "ospi.u-boot"
mtd3: 00040000 00040000 "ospi.env"
mtd4: 00100000 00040000 "ospi.sysfw"
mtd5: 00040000 00040000 "ospi.env.backup"
mtd6: 037c0000 00040000 "ospi.rootfs"
mtd7: 00040000 00040000 "ospi.phypattern"
root@j721e-evm:~# grep nameserver /proc/net/pnp > /dev/null && ln -sf /proc/net/p
pnp /etc/resolv.conf && systemctl restart systemd-resolved
root@j721e-evm:~# ls -l /lib/firmware; ls -lR /lib/firmware/ipc
total 28296
-rw-r--r-- 1 root root 2040 Mar 9 2018 LICENCE.ibt_firmware
-rw-r--r-- 1 root root 2046 Mar 9 2018 LICENCE.iwlwifi_firmware
-rw-r--r-- 1 root root 482656 Mar 9 2018 bl32.bin
-rw-r--r-- 1 root root 4324296 Mar 9 2018 bl32.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 cadence
drwxr-xr-x 2 root root 4096 Mar 9 2018 intel
-rw-r--r-- 1 root root 918268 Mar 9 2018 iwlwifi-3160-17.ucode
-rw-r--r-- 1 root root 2448976 Mar 9 2018 iwlwifi-8000C-34.ucode
-rw-r--r-- 1 root root 2428004 Mar 9 2018 iwlwifi-8000C-36.ucode
-rw-r--r-- 1 root root 2440780 Mar 9 2018 iwlwifi-8265-34.ucode
-rw-r--r-- 1 root root 2436632 Mar 9 2018 iwlwifi-8265-36.ucode
-rw-r--r-- 1 root root 2678092 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-34.ucode
-rw-r--r-- 1 root root 2521412 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-38.ucode
-rw-r--r-- 1 root root 1489652 Mar 9 2018 iwlwifi-9260-th-b0-jf-b0-46.ucode
lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66
lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_1_release_strip.xe66.signed
lrwxrwxrwx 1 root root 69 Mar 9 2018 j7-c66_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66
lrwxrwxrwx 1 root root 76 Mar 9 2018 j7-c66_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c66xdsp_2_release_strip.xe66.signed
lrwxrwxrwx 1 root root 65 Mar 9 2018 j7-c71_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71
lrwxrwxrwx 1 root root 72 Mar 9 2018 j7-c71_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_c7x_1_release_strip.xe71.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_0_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu2_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_0-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_0-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_0_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-main-r5f1_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-main-r5f1_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu3_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 67 Mar 9 2018 j7-mcu-r5f0_1-fw -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f
lrwxrwxrwx 1 root root 74 Mar 9 2018 j7-mcu-r5f0_1-fw-sec -> /lib/firmware/ti-ipc/j721e/ipc_echo_test_mcu1_1_release_strip.xer5f.signed
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru0_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt0_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_0-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-pru1_1-fw -> /lib/firmware/pru/PRU_RPMsg_Echo_Interrupt1_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu0_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt0_1.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_0-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_0.out
lrwxrwxrwx 1 root root 49 Mar 9 2018 j7-rtu1_1-fw -> /lib/firmware/pru/RTU_RPMsg_Echo_Interrupt1_1.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru0_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_0-fw -> /lib/firmware/pru/TX_PRU_Halt_0.out
lrwxrwxrwx 1 root root 35 Mar 9 2018 j7-txpru1_1-fw -> /lib/firmware/pru/TX_PRU_Halt_1.out
drwxr-xr-x 2 root root 4096 Mar 9 2018 pru
-rw-r--r-- 1 root root 247469 Mar 9 2018 pvdec_full_bin.fw
-rw-r--r-- 1 root root 4728 Mar 9 2018 regulatory.db
-rw-r--r-- 1 root root 1182 Mar 9 2018 regulatory.db.p7s
-rw-r--r-- 1 root root 135168 Mar 9 2018 rgx.fw.22.104.208.318
-rw-r--r-- 1 root root 135168 Mar 9 2018 rgx.fw.22.104.208.318.64k
-rw-r--r-- 1 root root 382744 Mar 9 2018 rgx.sh.22.104.208.318
-rw-r--r-- 1 root root 28 Mar 9 2018 tee-header_v2.bin
-rw-r--r-- 1 root root 0 Mar 9 2018 tee-pageable_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-pager_v2.bin
-rw-r--r-- 1 root root 482656 Mar 9 2018 tee-raw.bin
-rw-r--r-- 1 root root 482684 Mar 9 2018 tee.bin
-rw-r--r-- 1 root root 4324296 Mar 9 2018 tee.elf
drwxr-xr-x 2 root root 4096 Mar 9 2018 ti-connectivity
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-eth
drwxr-xr-x 3 root root 4096 Mar 9 2018 ti-ipc
ls: cannot access '/lib/firmware/ipc': No such file or directory
root@j721e-evm:~# cat /proc/diskstats
7 0 loop0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 1 loop1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 2 loop2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 3 loop3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 4 loop4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 5 loop5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 6 loop6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
7 7 loop7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
31 0 mtdblock0 11 0 88 0 0 0 0 0 0 12 0 0 0 0 0 0 0
31 1 mtdblock1 28 0 224 0 0 0 0 0 0 20 0 0 0 0 0 0 0
31 2 mtdblock2 29 0 232 4154504685 0 0 0 0 0 36 4154504685 0 0 0 0 0 0
31 3 mtdblock3 10 0 80 0 0 0 0 0 0 12 0 0 0 0 0 0 0
31 4 mtdblock4 13 0 104 0 0 0 0 0 0 16 0 0 0 0 0 0 0
31 5 mtdblock5 10 0 80 0 0 0 0 0 0 16 0 0 0 0 0 0 0
31 6 mtdblock6 36 0 672 0 0 0 0 0 0 112 0 0 0 0 0 0 0
31 7 mtdblock7 10 0 80 0 0 0 0 0 0 12 0 0 0 0 0 0 0
179 0 mmcblk1 751 75 46405 2831 2 0 16 4 0 1472 2836 0 0 0 0 0 0
179 1 mmcblk1p1 236 0 14593 1029 0 0 0 0 0 1076 1029 0 0 0 0 0 0
179 2 mmcblk1p2 200 44 15162 996 1 0 8 1 0 888 997 0 0 0 0 0 0
179 3 mmcblk1p3 278 31 15458 739 1 0 8 2 0 908 742 0 0 0 0 0 0
root@j721e-evm:~# cat /proc/interrupts
CPU0 CPU1
9: 0 0 GICv3 25 Level vgic
11: 5002 4217 GICv3 30 Level arch_timer
12: 0 0 GICv3 27 Level kvm guest vtimer
14: 0 0 GICv3 804 Edge arm-smmu-v3-evtq
15: 0 0 GICv3 800 Edge arm-smmu-v3-gerror
16: 0 0 GICv3 23 Level arm-pmu
17: 2726 0 GICv3 69 Level 32c00000.mailbox thr_011
38: 0 0 GICv3 928 Level 42120000.i2c
39: 2 0 GICv3 232 Level 2000000.i2c
40: 0 0 GICv3 233 Level 2010000.i2c
41: 2 0 GICv3 235 Level 2030000.i2c
42: 0 0 GICv3 237 Level 2050000.i2c
43: 10 0 MSI-INTA 15401056 Level 46000000.ethernet-tx0
44: 14 0 MSI-INTA 15401057 Level 46000000.ethernet-tx1
45: 5 0 MSI-INTA 15401058 Level 46000000.ethernet-tx2
46: 6 0 MSI-INTA 15401059 Level 46000000.ethernet-tx3
47: 23 0 MSI-INTA 15401060 Level 46000000.ethernet-tx4
48: 41657 0 MSI-INTA 15401061 Level 46000000.ethernet-tx5
49: 0 0 MSI-INTA 15401062 Level 46000000.ethernet-tx6
50: 0 0 MSI-INTA 15401063 Level 46000000.ethernet-tx7
52: 67586 0 MSI-INTA 15401065 Level 46000000.ethernet
63: 1567 0 MSI-INTA 13828536 Level 31150000.dma-controller chan0
213: 0 0 GICv3 878 Level 40a00000.serial
214: 690 0 GICv3 224 Level 2800000.serial
215: 0 0 GICv3 225 Level 2810000.serial
216: 2 0 GICv3 872 Level 47040000.spi
631: 1603 0 GICv3 36 Level mmc1
IPI0: 3326 8039 Rescheduling interrupts
IPI1: 6130 13925 Function call interrupts
IPI2: 0 0 CPU stop interrupts
IPI3: 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 Timer broadcast interrupts
IPI5: 0 0 IRQ work interrupts
Err: 0
root@j721e-evm:~# cat /proc/softirqs
CPU0 CPU1
HI: 0 0
TIMER: 1778 1812
NET_TX: 19 2
NET_RX: 76522 21
BLOCK: 0 0
IRQ_POLL: 0 0
TASKLET: 3370 3
SCHED: 3202 2318
HRTIMER: 0 0
RCU: 7318 7264
root@j721e-evm:~# ls -lR /run/media/mmcblk0p1
ls: cannot access '/run/media/mmcblk0p1': No such file or directory
root@j721e-evm:~# opkg list-installed | grep packagegroup-arago-test; echo $?
1
root@j721e-evm:~# [ 46.375750] kauditd_printk_skb: 7 callbacks suppressed
[ 46.375759] audit: type=1334 audit(1712764440.398:17): prog-id=12 op=UNLOAD
[ 46.387911] audit: type=1334 audit(1712764440.398:18): prog-id=11 op=UNLOAD
opkg list-installed | grep ti-test; echo $?
ti-test - 1.0-r0.121
ti-test-extras - 1.0-r0.121
0
root@j721e-evm:~# lsmod
Module Size Used by
root@j721e-evm:~# depmod -a
depmod: ERROR: could not open directory /lib/modules/6.9.0-rc1-next-20240326-00005-g5b564084f3b5: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
root@j721e-evm:~# lsmod
Module Size Used by
root@j721e-evm:~# echo 'hello world'
hello world
root@j721e-evm:~#
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment