Skip to content

Instantly share code, notes, and snippets.

@nehamalcom

nehamalcom/AM62x-SK

Created September 27, 2023 07:32
Show Gist options
  • Save nehamalcom/dcaa32bb9f7f28bf1bb449d153e7b566 to your computer and use it in GitHub Desktop.
Save nehamalcom/dcaa32bb9f7f28bf1bb449d153e7b566 to your computer and use it in GitHub Desktop.
Download ZIP
drivers: firmware: ti_sci: Get SCI revision only if TIFS/SYSFW is up - boot logs
Raw
AM62x-SK
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:26:21 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 13400 bytes
Trying to boot from UART
Cficate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 766599 bytes
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-dirty
NOTICE: BL31: Built : 14:12:59, May 22 2023
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:26:40 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 1808 bytes
Trying to boot from UART
CWarning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 725411 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:26:40 +0530)
SoC: AM62X SR1.0 GP
Model: Texas Instruments AM625 SK
DRAM: 2 GiB
Core: 56 devices, 23 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Hit any key to stop autoboot: 2 0
=>
=> version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:26:40 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
Raw
AM64x-HS-EVM
-00441-g9c265555ec (Sep 27 2023 - 11:27:02 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 13400 bytes
Trying to boot from UART
CLoaded 823203 bytes
Loading Environment from MMC... *** Warning - No MMC card found, using default environment
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-dirty
NOTICE: BL31: Built : 14:12:59, May 22 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:27:20 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
Trying to boot from UART
Loaded 994023 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:27:20 +0530)
SoC: AM64X SR2.0 HS-FS
Model: Texas Instruments AM642 EVM
Board: AM64-GPEVM rev C
DRAM: 2 GiB
Core: 59 devices, 29 uclasses, devicetree: separate
MMC: mmc@fa10000: 0, mmc@fa00000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
Net: eth0: ethernet@8000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=> version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:27:20 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
Raw
AM65x-EVM
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 12:19:07 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
SPL initial stack usage: 1816 bytes
Trying to boot from UART
C
- 02:24:46 [INFO] Disconnected serial from am654x-idk
- 02:24:46 [INFO] Receiving primary bootloader image ...
- 02:26:01 [INFO] Connected to am654x-idk via serial
- 02:26:02 [INFO] Target:
Loaded 790915 bytes
Starting ATF on ARM64 core...
NOTICE: BL31: v2.8(release):v2.8-226-g2fcd408bb3-dirty
NOTICE: BL31: Built : 00:42:57, Jan 13 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 11.3.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 12:19:19 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.5--v09.00.05 (Kool Koala)')
Trying to boot from UART
C
- 02:26:02 [INFO] Disconnected serial from am654x-idk
- 02:26:02 [INFO] Receiving secondary bootloader image ...
- 02:27:53 [INFO] Connected to am654x-idk via serial
- 02:27:53 [INFO] Host:
- 02:27:55 [INFO] Target:
Loaded 1087691 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 12:19:19 +0530)
SoC: AM65X SR2.0 GP
Model: Texas Instruments AM654 Base Board
Board: AM6-COMPROCEVM rev E4
DRAM: 4 GiB
Core: 118 devices, 31 uclasses, devicetree: separate
MMC: mmc@4f80000: 0, mmc@4fa0000: 1
Loading Environment from MMC... OK
In: No input devices available!
Out: No output devices available!
Err: No error devices available!
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00102 cpsw_ver: 0x6BA80102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
- 02:27:56 [INFO] Disconnected serial from am654x-idk
- 02:27:56 [INFO] Connected to am654x-idk via serial
- 02:27:56 [INFO] Host: version
- 02:27:56 [INFO] Target:
version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 12:19:19 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
- 02:27:56 [INFO] DUT is able to boot from uart on iteration 0.
Raw
J7200-EVM
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:18 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Trying to boot from UART
Ce on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 951883 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-dirty
NOTICE: BL31: Built : 14:12:59, May 22 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:39 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Detected: J7X-BASE-CPB rev E3
Detected: J7X-VSC8514-ETH rev E2
error getting GPIO lookup name: -22
Trying to boot from UART
Cificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1163915 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:39 +0530)
SoC: J7200 SR2.0 GP
Model: Texas Instruments K3 J7200 SoC
Board: J7200X-PM2-SOM rev E8
DRAM: 4 GiB
Core: 84 devices, 32 uclasses, devicetree: separate
Flash: 0 Bytes
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev E3
Detected: J7X-VSC8514-ETH rev E2
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=>
=>
=>
=>
=> version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:39 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
Raw
J721E-EVM
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:29:02 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
ESM init failed: -19
Trying to boot from UART
Ce on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1001367 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-dirty
NOTICE: BL31: Built : 14:12:59, May 22 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:29:32 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
Trying to boot from UART
Cficate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1271807 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:29:32 +0530)
SoC: J721E SR1.0 GP
Model: Texas Instruments K3 J721E SoC
Board: J721EX-PM2-SOM rev E7
DRAM: 4 GiB
Core: 124 devices, 36 uclasses, devicetree: separate
Flash: 64 MiB
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2800000
Out: serial@2800000
Err: serial@2800000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA00101 cpsw_ver: 0x6BA80100 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Detected: J7X-BASE-CPB rev E3
Detected: J7X-GESI-EXP rev E3
Detected: J7X-VSC8514-ETH rev E2
cdns,sierra serdes@5000000: PHY not found 0x7364 vs 0x0
Sierra init failed:-22
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
=>
=>
=>
=>
=>
=>
=> version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:29:32 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
Raw
J721S2-EVM
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:27:39 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
SPL initial stack usage: 13448 bytes
Trying to boot from UART
C
- 01:09:54 [INFO] Disconnected serial from j721s2-evm
- 01:09:54 [INFO] Receiving primary bootloader image ...
- 01:11:38 [INFO] Connected to j721s2-evm via serial
- 01:11:39 [INFO] Target:
ficate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 978347 bytes
Loading Environment from nowhere... OK
init_env from device 7 not supported!
Starting ATF on ARM64 core...
NOTICE: BL31: v2.9(release):v2.9.0-dirty
NOTICE: BL31: Built : 14:12:59, May 22 2023
I/TC:
I/TC: OP-TEE version: 3.20.0 (gcc version 11.4.0 (GCC)) #1 Fri Jan 20 15:42:54 UTC 2023 aarch64
I/TC: WARNING: This OP-TEE configuration might be insecure!
I/TC: WARNING: Please check https://optee.readthedocs.io/en/latest/architecture/porting_guidelines.html
I/TC: Primary CPU initializing
I/TC: SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
I/TC: HUK Initialized
I/TC: Activated SA2UL device
I/TC: Fixing SA2UL firewall owner for GP device
I/TC: Enabled firewalls for SA2UL TRNG device
I/TC: SA2UL TRNG initialized
I/TC: SA2UL Drivers initialized
I/TC: Primary CPU switching to normal world boot
U-Boot SPL 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:00 +0530)
SYSFW ABI: 3.1 (firmware rev 0x0009 '9.0.6--v09.00.06 (Kool Koala)')
Trying to boot from UART
C
- 01:11:39 [INFO] Disconnected serial from j721s2-evm
- 01:11:39 [INFO] Receiving secondary bootloader image ...
- 01:13:47 [INFO] Connected to j721s2-evm via serial
- 01:13:47 [INFO] Host:
- 01:13:48 [INFO] Target:
Warning: Detected image signing certificate on GP device. Skipping certificate to prevent boot failure. This will fail if the image was also encrypted
Loaded 1227159 bytes
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:00 +0530)
SoC: J721S2 SR1.0 GP
Model: Texas Instruments J721S2 EVM
Board: J721S2X-PM1-SOM rev E1
DRAM: 16 GiB
Core: 61 devices, 26 uclasses, devicetree: separate
Flash: 0 Bytes
MMC: mmc@4f80000: 0, mmc@4fb0000: 1
Loading Environment from nowhere... OK
In: serial@2880000
Out: serial@2880000
Err: serial@2880000
am65_cpsw_nuss ethernet@46000000: K3 CPSW: nuss_ver: 0x6BA02102 cpsw_ver: 0x6BA82102 ale_ver: 0x00293904 Ports:1 mdio_freq:1000000
Net: eth0: ethernet@46000000port@1
Hit any key to stop autoboot: 2 0
=>
=>
=>
- 01:13:49 [INFO] Disconnected serial from j721s2-evm
- 01:13:49 [INFO] Connected to j721s2-evm via serial
- 01:13:49 [INFO] Host: version
- 01:13:49 [INFO] Target:
version
U-Boot 2023.10-rc4-00441-g9c265555ec (Sep 27 2023 - 11:28:00 +0530)
aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621
GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621
=>
- 01:13:49 [INFO] DUT is able to boot from uart on iteration 0.
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment