Please refer to previous revisions if you know what to do.
The patch proposed was merged into kernel in 5.8 release, but no longer working as of linux 5.11
Got the same problems and outputs on Ubuntu 22.04.1 LTS.
My dongle CSR 8510 A10 works fine on windows 7 on Microsoft generic driver.
Tried kernels 5.15.0 and 5.19.16.
I`m running Fedora 37 with kernel 6.0.7-301, unmodified.
Also getting errors, it used to work just fine on Fedora 35 and on older kernels in other distros.
[ 15.034386] Bluetooth: Core ver 2.22
[ 15.034400] Bluetooth: HCI device and connection manager initialized
[ 15.034402] Bluetooth: HCI socket layer initialized
[ 15.034404] Bluetooth: L2CAP socket layer initialized
[ 15.034407] Bluetooth: SCO socket layer initialized
[ 15.825231] Bluetooth: hci0: CSR: Unbranded CSR clone detected; adding workarounds and force-suspending once...
[ 15.825235] Bluetooth: hci0: CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround
[ 15.825238] Bluetooth: hci0: HCI Delete Stored Link Key command is advertised, but not supported.
[ 15.825239] Bluetooth: hci0: HCI Set Event Filter command not supported.
[ 17.948972] Bluetooth: hci0: command 0x0c5a tx timeout
[ 17.949005] Bluetooth: hci0: Opcode 0x c5a failed: -110
[ 20.711035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 20.711037] Bluetooth: BNEP filters: protocol multicast
[ 20.711041] Bluetooth: BNEP socket layer initialized
See here: https://bugzilla.kernel.org/show_bug.cgi?id=60824#c242
Submitted a patch series here: https://bugzilla.kernel.org/show_bug.cgi?id=60824#c243
There was another simultaneous conversation in the mailing list here: https://linuxlists.cc/l/15/linux-bluetooth/t/4663230/(regression)_cambridge_silicon_radio,_ltd_bluetooth_dongle_unusable_again_with_kernel_6.0#post4683596
In the end, Luiz merged 2 out of the 3 patches upstream. There's radio silence about the third one.
Subscribe to the Bugzilla ticket if you want to stay up to date.
The patch series talked above is currently empty: https://patchwork.kernel.org/project/bluetooth/list/?series=690177&state
I'd patch my own kernel if possible. This problem has kept me out of Linux entirely.
Anyone who needs a patch for linux 5.15.x LTS series, can use this patch. Credit goes to @Swyter for creating the original patches. I just combined them and made it compatible with linux 5.15.x LTS. It has been tested on linux 5.15.27.
Just copy and save it as a .diff file and apply it on the kernel source.
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ac90392cc..39b189b16 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1942,6 +1942,8 @@ static int btusb_setup_csr(struct hci_dev *hdev) */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. @@ -1952,16 +1954,16 @@ static int btusb_setup_csr(struct hci_dev *hdev) /* * Special workaround for these BT 4.0 chip clones, and potentially more: * - * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810) + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012) * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709) * * These controllers are really messed-up. * * 1. Their bulk RX endpoint will never report any data unless - * the device was suspended at least once (yes, really). + * the device was suspended at least once (yes, really). * 2. They will not wakeup when autosuspended and receiving data - * on their bulk RX endpoint from e.g. a keyboard or mouse - * (IOW remote-wakeup support is broken for the bulk endpoint). + * on their bulk RX endpoint from e.g. a keyboard or mouse + * (IOW remote-wakeup support is broken for the bulk endpoint). * * To fix 1. enable runtime-suspend, force-suspend the * HCI and then wake-it up by disabling runtime-suspend. @@ -1981,7 +1983,7 @@ static int btusb_setup_csr(struct hci_dev *hdev) if (ret >= 0) msleep(200); else - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround"); + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9ce46cb85..41f0026b6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,16 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + + /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with + * HCI_FLT_CLEAR_ALL are ignored and event filtering is + * completely avoided. A subset of the CSR controller + * clones struggle with this and instantly lock up. + * + * Note that devices using this must (separately) disable + * runtime suspend, because event filtering takes place there. + */ + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, }; /* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 53f1b0801..4c7f748b8 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -271,6 +271,7 @@ static int hci_init1_req(struct hci_request *req, unsigned long opt) static void bredr_setup(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; __le16 param; __u8 flt_type; @@ -292,9 +293,14 @@ static void bredr_setup(struct hci_request *req) /* Read Current IAC LAP */ hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); - /* Clear Event Filters */ - flt_type = HCI_FLT_CLEAR_ALL; - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + /* Clear Event Filters; some fake CSR controllers lock up after setting + * this type of filter, so avoid sending the request altogether. + */ + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + { + flt_type = HCI_FLT_CLEAR_ALL; + hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + } /* Connection accept timeout ~20 secs */ param = cpu_to_le16(0x7d00); diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index 1d34d330a..35308de87 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1156,11 +1156,15 @@ static bool adv_instance_is_scannable(struct hci_dev *hdev, u8 instance) static void hci_req_clear_event_filter(struct hci_request *req) { struct hci_cp_set_event_filter f; + struct hci_dev *hdev = req->hdev; + + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) + return; - if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED)) + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) return; - if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) { + if (hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) { memset(&f, 0, sizeof(f)); f.flt_type = HCI_FLT_CLEAR_ALL; hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f); @@ -1169,15 +1173,18 @@ static void hci_req_clear_event_filter(struct hci_request *req) static void hci_req_set_event_filter(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; struct bdaddr_list_with_flags *b; struct hci_cp_set_event_filter f; - struct hci_dev *hdev = req->hdev; u8 scan = SCAN_DISABLED; bool scanning = test_bit(HCI_PSCAN, &hdev->flags); if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return; + /* Always clear event filter when starting */ hci_req_clear_event_filter(req);
Thank you! Worked on Ubuntu 22.04!
uname -r
5.15.64-bluetooth
How fascinating - on an earlier standard Ubuntu kernel, the one of these I have Just Worked (and worked better than the 1Mii B10 dongle that's supposed to be the gold standard for doing this on Linux!)
But on the 5.15 kernel, it doesn't. I am not sure I have the patience to patch it.
Try a more updated or newer kernel instead of patching manually. Ubuntu and Debian are notorious for being extremely slow when moving from one version to another. The fix exists, it just hasn't arrived yet to your door. Arch Linux got it in early December, for example.
Anyone who needs a patch for linux 5.15.x LTS series, can use this patch. Credit goes to @Swyter for creating the original patches. I just combined them and made it compatible with linux 5.15.x LTS. It has been tested on linux 5.15.27.
Just copy and save it as a .diff file and apply it on the kernel source.diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ac90392cc..39b189b16 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1942,6 +1942,8 @@ static int btusb_setup_csr(struct hci_dev *hdev) */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. @@ -1952,16 +1954,16 @@ static int btusb_setup_csr(struct hci_dev *hdev) /* * Special workaround for these BT 4.0 chip clones, and potentially more: * - * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810) + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012) * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709) * * These controllers are really messed-up. * * 1. Their bulk RX endpoint will never report any data unless - * the device was suspended at least once (yes, really). + * the device was suspended at least once (yes, really). * 2. They will not wakeup when autosuspended and receiving data - * on their bulk RX endpoint from e.g. a keyboard or mouse - * (IOW remote-wakeup support is broken for the bulk endpoint). + * on their bulk RX endpoint from e.g. a keyboard or mouse + * (IOW remote-wakeup support is broken for the bulk endpoint). * * To fix 1. enable runtime-suspend, force-suspend the * HCI and then wake-it up by disabling runtime-suspend. @@ -1981,7 +1983,7 @@ static int btusb_setup_csr(struct hci_dev *hdev) if (ret >= 0) msleep(200); else - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround"); + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9ce46cb85..41f0026b6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,16 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + + /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with + * HCI_FLT_CLEAR_ALL are ignored and event filtering is + * completely avoided. A subset of the CSR controller + * clones struggle with this and instantly lock up. + * + * Note that devices using this must (separately) disable + * runtime suspend, because event filtering takes place there. + */ + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, }; /* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 53f1b0801..4c7f748b8 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -271,6 +271,7 @@ static int hci_init1_req(struct hci_request *req, unsigned long opt) static void bredr_setup(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; __le16 param; __u8 flt_type; @@ -292,9 +293,14 @@ static void bredr_setup(struct hci_request *req) /* Read Current IAC LAP */ hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); - /* Clear Event Filters */ - flt_type = HCI_FLT_CLEAR_ALL; - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + /* Clear Event Filters; some fake CSR controllers lock up after setting + * this type of filter, so avoid sending the request altogether. + */ + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + { + flt_type = HCI_FLT_CLEAR_ALL; + hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + } /* Connection accept timeout ~20 secs */ param = cpu_to_le16(0x7d00); diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index 1d34d330a..35308de87 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1156,11 +1156,15 @@ static bool adv_instance_is_scannable(struct hci_dev *hdev, u8 instance) static void hci_req_clear_event_filter(struct hci_request *req) { struct hci_cp_set_event_filter f; + struct hci_dev *hdev = req->hdev; + + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) + return; - if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED)) + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) return; - if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) { + if (hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) { memset(&f, 0, sizeof(f)); f.flt_type = HCI_FLT_CLEAR_ALL; hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f); @@ -1169,15 +1173,18 @@ static void hci_req_clear_event_filter(struct hci_request *req) static void hci_req_set_event_filter(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; struct bdaddr_list_with_flags *b; struct hci_cp_set_event_filter f; - struct hci_dev *hdev = req->hdev; u8 scan = SCAN_DISABLED; bool scanning = test_bit(HCI_PSCAN, &hdev->flags); if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return; + /* Always clear event filter when starting */ hci_req_clear_event_filter(req);
Thank you! Worked on Ubuntu 22.04! uname -r 5.15.64-bluetooth
Hello, I tried this patch on my Raspberry OS aarch64 with kernel 5.15.89-v8 however it didn't work. My 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode). My usb is still down according to hciconfig. It doesn't work for arm?
This patch helped get the Ritmix RWA-350 working on Ubuntu 22.04.
Shown in lsusb
as:
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
I cleaned up the patch:
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 8c41c76..9632251 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1979,6 +1979,8 @@ static int btusb_setup_csr(struct hci_dev *hdev)
*/
set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks);
set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks);
+ set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks);
+ set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks);
/* Clear the reset quirk since this is not an actual
* early Bluetooth 1.1 device from CSR.
@@ -2018,7 +2020,7 @@ static int btusb_setup_csr(struct hci_dev *hdev)
if (ret >= 0)
msleep(200);
else
- bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround");
+ bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround");
pm_runtime_forbid(&data->udev->dev);
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 9ce46cb..b97602a 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -255,6 +255,7 @@ enum {
* during the hdev->setup vendor callback.
*/
HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER,
+ HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL,
};
/* HCI device flags */
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index bb84ff5..2a7af9a 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -294,6 +294,7 @@ static void bredr_setup(struct hci_request *req)
/* Clear Event Filters */
flt_type = HCI_FLT_CLEAR_ALL;
+ if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks))
hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type);
/* Connection accept timeout ~20 secs */
diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c
index c2db60a..39a871a 100644
--- a/net/bluetooth/hci_request.c
+++ b/net/bluetooth/hci_request.c
@@ -1160,6 +1160,9 @@ static void hci_req_clear_event_filter(struct hci_request *req)
if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED))
return;
+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks))
+ return;
+
if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) {
memset(&f, 0, sizeof(f));
f.flt_type = HCI_FLT_CLEAR_ALL;
@@ -1178,6 +1181,9 @@ static void hci_req_set_event_filter(struct hci_request *req)
if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED))
return;
+ if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks))
+ return;
+
/* Always clear event filter when starting */
hci_req_clear_event_filter(req);
Extract the linux-source
archive corresponding to your kernel and do the following:
$ patch -p1 < csr-clean.patch
$ make -C /lib/modules/$(uname -r)/build M=$(pwd)/net/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules
$ make -C /lib/modules/$(uname -r)/build M=$(pwd)/drivers/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules
$ strip --strip-debug net/bluetooth/bluetooth.ko
$ strip --strip-debug drivers/bluetooth/btusb.ko
Then you can replace the old drivers in /usr/lib/modules/$(uname -r)/kernel
with the new ones. Don't forget to backup the old files.
I compiled this patch 5.15 but unfortunately it didn't work for my dongle.
It works if you remove the reset code from the bluetooth driver, no patches affect to this adapter
Anyone who needs a patch for linux 5.15.x LTS series, can use this patch. Credit goes to @Swyter for creating the original patches. I just combined them and made it compatible with linux 5.15.x LTS. It has been tested on linux 5.15.27.
Just copy and save it as a .diff file and apply it on the kernel source.
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index ac90392cc..39b189b16 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1942,6 +1942,8 @@ static int btusb_setup_csr(struct hci_dev *hdev) */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. @@ -1952,16 +1954,16 @@ static int btusb_setup_csr(struct hci_dev *hdev) /* * Special workaround for these BT 4.0 chip clones, and potentially more: * - * - 0x0134: a Barrot 8041a02 (HCI rev: 0x1012 sub: 0x0810) + * - 0x0134: a Barrot 8041a02 (HCI rev: 0x0810 sub: 0x1012) * - 0x7558: IC markings FR3191AHAL 749H15143 (HCI rev/sub-version: 0x0709) * * These controllers are really messed-up. * * 1. Their bulk RX endpoint will never report any data unless - * the device was suspended at least once (yes, really). + * the device was suspended at least once (yes, really). * 2. They will not wakeup when autosuspended and receiving data - * on their bulk RX endpoint from e.g. a keyboard or mouse - * (IOW remote-wakeup support is broken for the bulk endpoint). + * on their bulk RX endpoint from e.g. a keyboard or mouse + * (IOW remote-wakeup support is broken for the bulk endpoint). * * To fix 1. enable runtime-suspend, force-suspend the * HCI and then wake-it up by disabling runtime-suspend. @@ -1981,7 +1983,7 @@ static int btusb_setup_csr(struct hci_dev *hdev) if (ret >= 0) msleep(200); else - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround"); + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9ce46cb85..41f0026b6 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,16 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + + /* When this quirk is set, HCI_OP_SET_EVENT_FLT requests with + * HCI_FLT_CLEAR_ALL are ignored and event filtering is + * completely avoided. A subset of the CSR controller + * clones struggle with this and instantly lock up. + * + * Note that devices using this must (separately) disable + * runtime suspend, because event filtering takes place there. + */ + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, }; /* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 53f1b0801..4c7f748b8 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -271,6 +271,7 @@ static int hci_init1_req(struct hci_request *req, unsigned long opt) static void bredr_setup(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; __le16 param; __u8 flt_type; @@ -292,9 +293,14 @@ static void bredr_setup(struct hci_request *req) /* Read Current IAC LAP */ hci_req_add(req, HCI_OP_READ_CURRENT_IAC_LAP, 0, NULL); - /* Clear Event Filters */ - flt_type = HCI_FLT_CLEAR_ALL; - hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + /* Clear Event Filters; some fake CSR controllers lock up after setting + * this type of filter, so avoid sending the request altogether. + */ + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + { + flt_type = HCI_FLT_CLEAR_ALL; + hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); + } /* Connection accept timeout ~20 secs */ param = cpu_to_le16(0x7d00); diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index 1d34d330a..35308de87 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1156,11 +1156,15 @@ static bool adv_instance_is_scannable(struct hci_dev *hdev, u8 instance) static void hci_req_clear_event_filter(struct hci_request *req) { struct hci_cp_set_event_filter f; + struct hci_dev *hdev = req->hdev; + + if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) + return; - if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED)) + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) return; - if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) { + if (hci_dev_test_flag(hdev, HCI_EVENT_FILTER_CONFIGURED)) { memset(&f, 0, sizeof(f)); f.flt_type = HCI_FLT_CLEAR_ALL; hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &f); @@ -1169,15 +1173,18 @@ static void hci_req_clear_event_filter(struct hci_request *req) static void hci_req_set_event_filter(struct hci_request *req) { + struct hci_dev *hdev = req->hdev; struct bdaddr_list_with_flags *b; struct hci_cp_set_event_filter f; - struct hci_dev *hdev = req->hdev; u8 scan = SCAN_DISABLED; bool scanning = test_bit(HCI_PSCAN, &hdev->flags); if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return; + /* Always clear event filter when starting */ hci_req_clear_event_filter(req);
بخدا مسلمون نیستی رضا. یه راهنمای قدم به قدمی چیزی مینوشتی که یکی با معلومات ضعیف مثل من هم بتونه استفاده کنه این رو. من debian 11 kernel 5.10-0.22rt دارم. میتونی یکم ساده تر توضیح بدی باید چیکار کنم ؟
This patch helped get the Ritmix RWA-350 working on Ubuntu 22.04.
Shown in
lsusb
as:
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
I cleaned up the patch:
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8c41c76..9632251 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1979,6 +1979,8 @@ static int btusb_setup_csr(struct hci_dev *hdev) */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. @@ -2018,7 +2020,7 @@ static int btusb_setup_csr(struct hci_dev *hdev) if (ret >= 0) msleep(200); else - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround"); + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9ce46cb..b97602a 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,7 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, }; /* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index bb84ff5..2a7af9a 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -294,6 +294,7 @@ static void bredr_setup(struct hci_request *req) /* Clear Event Filters */ flt_type = HCI_FLT_CLEAR_ALL; + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks)) hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); /* Connection accept timeout ~20 secs */ diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index c2db60a..39a871a 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1160,6 +1160,9 @@ static void hci_req_clear_event_filter(struct hci_request *req) if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks)) + return; + if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) { memset(&f, 0, sizeof(f)); f.flt_type = HCI_FLT_CLEAR_ALL; @@ -1178,6 +1181,9 @@ static void hci_req_set_event_filter(struct hci_request *req) if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return; + /* Always clear event filter when starting */ hci_req_clear_event_filter(req);Extract the
linux-source
archive corresponding to your kernel and do the following:$ patch -p1 < csr-clean.patch $ make -C /lib/modules/$(uname -r)/build M=$(pwd)/net/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules $ make -C /lib/modules/$(uname -r)/build M=$(pwd)/drivers/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules $ strip --strip-debug net/bluetooth/bluetooth.ko $ strip --strip-debug drivers/bluetooth/btusb.koThen you can replace the old drivers in
/usr/lib/modules/$(uname -r)/kernel
with the new ones. Don't forget to backup the old files.
It worked for me, tanks.
I currently have kernel 5.15.0-78-generic
My archives copilled:
https://drive.google.com/drive/folders/1cn7CZZUWD4B8hi-y0RKCNZIo78Bw7wFV?usp=sharing
I backed up and replaced the files
btusb.ko in /usr/lib/modules/5.15.0-XX-generic/kernel/drivers/bluetooth
bluetooth.ko in /usr/lib/modules/5.15.0-XX-generic/kernel/net/bluetooth/
Tossing my picture in for others. Was anyone lucky enough to find the exact chip used or have a module where the markings aren't etched away and replaced with what I assume is a serial number or datecode?
It was advertised as a Bluetooth 4.0 radio and it supposedly has the Qualcomm CSR8510A10 chip inside of it, but I seriously doubt it.
Chip markings which seem meaningless of EAG435 with 24 pins total (Those little copper rectangles on the edge) and 13 pins soldered in a Quad Flat No-Lead (QFN) package.
Side view of chip with markings of 24Mhz crystal
Front of PCB with flash
2018.12.06
LV-B14-V1.0
Pinout so far: (Adding the pinout later. Beeping everything out currently.)
@JeffreyO Thanks a lot for going above and beyond with your teardown! I remember trying to find the actual Chinese ASIC vendor, which (unless one takes a microscope photo of the bare die) it's going to be hard, but there are mentions to companies like Barrot in the kernel, which may be a good start point for more shady stuff: https://elixir.bootlin.com/linux/latest/source/drivers/bluetooth/btusb.c#L2322
If someone tried to clone the CSR chips they haven't done it correctly. ¯\_(ツ)_/¯
@JeffreyO Thanks a lot for going above and beyond with your teardown! I remember trying to find the actual Chinese ASIC vendor, which (unless one takes a microscope photo of the bare die) it's going to be hard, but there are mentions to companies like Barrot in the kernel, which may be a good start point for more shady stuff: https://elixir.bootlin.com/linux/latest/source/drivers/bluetooth/btusb.c#L2322
If someone tried to clone the CSR chips they haven't done it correctly. ¯_(ツ)_/¯
Thank you. Also, for anyone wondering, there is a way to properly and nondestructively open up the USB dongle. I just gently pried it apart and wiggled it enough and was lucky not to break anything.
But, that's not the right way. The right way is that there's a clip in the USB part latching to the outside of the case. You press down on that and slide the dongle apart away from the metal. It should all come out in one piece.
To put it back together, you sandwich the plastic parts and the PCB back together and slide it into the metal part (Keep it mind that those 2 tiny divots in the metal are the clips. It only goes together one way.) while applying very light pressure to the clip. You should hear a click when everything is back together successfully.
This patch helped get the Ritmix RWA-350 working on Ubuntu 22.04.
Shown inlsusb
as:
ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
I cleaned up the patch:diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 8c41c76..9632251 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -1979,6 +1979,8 @@ static int btusb_setup_csr(struct hci_dev *hdev) */ set_bit(HCI_QUIRK_BROKEN_STORED_LINK_KEY, &hdev->quirks); set_bit(HCI_QUIRK_BROKEN_ERR_DATA_REPORTING, &hdev->quirks); + set_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks); + set_bit(HCI_QUIRK_NO_SUSPEND_NOTIFIER, &hdev->quirks); /* Clear the reset quirk since this is not an actual * early Bluetooth 1.1 device from CSR. @@ -2018,7 +2020,7 @@ static int btusb_setup_csr(struct hci_dev *hdev) if (ret >= 0) msleep(200); else - bt_dev_err(hdev, "CSR: Failed to suspend the device for our Barrot 8041a02 receive-issue workaround"); + bt_dev_warn(hdev, "CSR: Couldn't suspend the device for our Barrot 8041a02 receive-issue workaround"); pm_runtime_forbid(&data->udev->dev); diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9ce46cb..b97602a 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -255,6 +255,7 @@ enum { * during the hdev->setup vendor callback. */ HCI_QUIRK_BROKEN_READ_TRANSMIT_POWER, + HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, }; /* HCI device flags */ diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index bb84ff5..2a7af9a 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -294,6 +294,7 @@ static void bredr_setup(struct hci_request *req) /* Clear Event Filters */ flt_type = HCI_FLT_CLEAR_ALL; + if (!test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks)) hci_req_add(req, HCI_OP_SET_EVENT_FLT, 1, &flt_type); /* Connection accept timeout ~20 secs */ diff --git a/net/bluetooth/hci_request.c b/net/bluetooth/hci_request.c index c2db60a..39a871a 100644 --- a/net/bluetooth/hci_request.c +++ b/net/bluetooth/hci_request.c @@ -1160,6 +1160,9 @@ static void hci_req_clear_event_filter(struct hci_request *req) if (!hci_dev_test_flag(req->hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &req->hdev->quirks)) + return; + if (hci_dev_test_flag(req->hdev, HCI_EVENT_FILTER_CONFIGURED)) { memset(&f, 0, sizeof(f)); f.flt_type = HCI_FLT_CLEAR_ALL; @@ -1178,6 +1181,9 @@ static void hci_req_set_event_filter(struct hci_request *req) if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) return; + if (test_bit(HCI_QUIRK_BROKEN_FILTER_CLEAR_ALL, &hdev->quirks)) + return; + /* Always clear event filter when starting */ hci_req_clear_event_filter(req);Extract the
linux-source
archive corresponding to your kernel and do the following:$ patch -p1 < csr-clean.patch $ make -C /lib/modules/$(uname -r)/build M=$(pwd)/net/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules $ make -C /lib/modules/$(uname -r)/build M=$(pwd)/drivers/bluetooth ccflags-y="$(echo "-include "$(pwd)/include/net/bluetooth/{bluetooth.h,hci.h})" modules $ strip --strip-debug net/bluetooth/bluetooth.ko $ strip --strip-debug drivers/bluetooth/btusb.koThen you can replace the old drivers in
/usr/lib/modules/$(uname -r)/kernel
with the new ones. Don't forget to backup the old files.It worked for me, tanks.
I currently have kernel 5.15.0-78-generic
My archives copilled: https://drive.google.com/drive/folders/1cn7CZZUWD4B8hi-y0RKCNZIo78Bw7wFV?usp=sharing
I backed up and replaced the files
btusb.ko in /usr/lib/modules/5.15.0-XX-generic/kernel/drivers/bluetooth bluetooth.ko in /usr/lib/modules/5.15.0-XX-generic/kernel/net/bluetooth/
I have no idea on how to apply those patches and I'm willing a lot do so as my usb dongle shows up with same name in lsusb. Is there any material or could you explain me in a simple manner so I can reproduce it myself for kernel 6.6.6-arch1-1
?
OKay found this thread when debugging my bluetooth hid device. Sometimes it works on linux, and doesnt work on my phone and windows. And when it works on windows and android, it doesnt work on linux. My issue is that it doesnt show up as a joystick and so it doesnt subscribe to the hid characteristic. Using TP-LINK UB400 and it shows up just like yours.
These CSR clones are not one device. They use the same case, but there may be different chips inside. They simply use the API from an existing driver so as not to write their own. But they only test it on Windows. Since different chips are used, their firmware has a variety of bugs, so workarounds for one clone will not help for another.
These CSR clones are not one device. They use the same case, but there may be different chips inside. They simply use the API from an existing driver so as not to write their own. But they only test it on Windows. Since different chips are used, their firmware has a variety of bugs, so workarounds for one clone will not help for another.
The CSR's barely work on Windows even. Maybe for very basic stuff. But, if it says that it has Bluetooth LE and advanced features, it definitely does not, or if it does, it's extremely broken.
These CSR clones are not one device. They use the same case, but there may be different chips inside. They simply use the API from an existing driver so as not to write their own. But they only test it on Windows. Since different chips are used, their firmware has a variety of bugs, so workarounds for one clone will not help for another.
The CSR's barely work on Windows even. Maybe for very basic stuff. But, if it says that it has Bluetooth LE and advanced features, it definitely does not, or if it does, it's extremely broken.
well the one i have is tp-link ub400, thought they were a reputable brand
These CSR clones are not one device. They use the same case, but there may be different chips inside. They simply use the API from an existing driver so as not to write their own. But they only test it on Windows. Since different chips are used, their firmware has a variety of bugs, so workarounds for one clone will not help for another.
The CSR's barely work on Windows even. Maybe for very basic stuff. But, if it says that it has Bluetooth LE and advanced features, it definitely does not, or if it does, it's extremely broken.
well the one i have is tp-link ub400, thought they were a reputable brand
TP-Link should be a good one. But, the generic no-name ones like one I posted pictures to above is awful even on Windows.
I wonder if it's possible to rewrite and reflash the firmware of the CSR Clones. They could be an interesting thing for a common open-source firmware. The device is awful, but it's extremely common and cheap.
I wonder if it's possible to rewrite and reflash the firmware of the CSR Clones. They could be an interesting thing for a common open-source firmware. The device is awful, but it's extremely common and cheap.
Chinese manufacturers produce identical looking Bluetooth dongles with different chips. They use new chips over time. So you can't have one firmware to fix them all.
I wonder if it's possible to rewrite and reflash the firmware of the CSR Clones. They could be an interesting thing for a common open-source firmware. The device is awful, but it's extremely common and cheap.
Chinese manufacturers produce identical looking Bluetooth dongles with different chips. They use new chips over time. So you can't have one firmware to fix them all.
Ah, that's unfortunate.
Have installed
5.17.1-051701-generic
onUbuntu 22.04.1
and still have the problemlsusb:
Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Have tried with
6.0.7-060007-generic
and still same outputDid somebody solve this?