Instantly share code, notes, and snippets.

Embed
What would you like to do?
Kali 2017.1 x64, Docker-ce Install script
#!/bin/bash
# update apt-get
export DEBIAN_FRONTEND="noninteractive"
sudo apt-get update
# remove previously installed Docker
sudo apt-get remove docker docker-engine docker.io* lxc-docker*
# install dependencies 4 cert
sudo apt-get install apt-transport-https ca-certificates curl gnupg2 software-properties-common
# add Docker repo gpg key
curl -fsSL https://download.docker.com/linux/debian/gpg | sudo apt-key add -
echo "deb https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list
sudo apt-get update
# install Docker
sudo apt-get install docker-ce
# run Hellow World image
sudo docker run hello-world
# manage Docker as a non-root user
sudo groupadd docker
sudo usermod -aG docker $USER
# configure Docker to start on boot
sudo systemctl enable docker
@nikallass

This comment has been minimized.

Show comment
Hide comment
@nikallass

nikallass May 30, 2017

I spend a lot of time to install docker on kali linux x64. x32 is not supported. So here is the solution.

Owner

nikallass commented May 30, 2017

I spend a lot of time to install docker on kali linux x64. x32 is not supported. So here is the solution.

@rotelok

This comment has been minimized.

Show comment
Hide comment
@rotelok

rotelok Jun 8, 2017

change line 16 from
echo "deb https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list
to
echo "deb [arch=amd64] https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list

so it doesn't break on multilib systems, or else you will get the following error.
"N: Skipping acquire of configured file 'stable/binary-i386/Packages' as repository 'https://download.docker.com/linux/debian stretch InRelease' doesn't support architecture 'i386'"

rotelok commented Jun 8, 2017

change line 16 from
echo "deb https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list
to
echo "deb [arch=amd64] https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list

so it doesn't break on multilib systems, or else you will get the following error.
"N: Skipping acquire of configured file 'stable/binary-i386/Packages' as repository 'https://download.docker.com/linux/debian stretch InRelease' doesn't support architecture 'i386'"

@lgalke

This comment has been minimized.

Show comment
Hide comment
@lgalke

lgalke Jun 29, 2017

Thanks for this one.

lgalke commented Jun 29, 2017

Thanks for this one.

@starnightcyber

This comment has been minimized.

Show comment
Hide comment
@starnightcyber

starnightcyber Jul 10, 2017

Thanks...
Running this script met a small question, with --fix-missing option solved this problem .

starnightcyber commented Jul 10, 2017

Thanks...
Running this script met a small question, with --fix-missing option solved this problem .

@ktec

This comment has been minimized.

Show comment
Hide comment
@ktec

ktec Nov 6, 2017

Amazing, thanks for sharing 🌮 🎉

ktec commented Nov 6, 2017

Amazing, thanks for sharing 🌮 🎉

@marxenegls

This comment has been minimized.

Show comment
Hide comment
@marxenegls

marxenegls Dec 2, 2017

kept getting permission denied at editing apt/sources i know it should be an extra entry under apt/sources.list.d and

sudo touch create file docker_ce.list first than echo "deb [arch=amd64] https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list.d/docker_ce.list ..
sudo gpasswd -a $USER docker ( -d to remove)
...to run docker without sudo but keep in mind it is a risk (https://www.projectatomic.io/blog/2015/08/why-we-dont-let-non-root-users-run-docker-in-centos-fedora-or-rhel/)
(docker run -ti --privileged -v /:/host fedora chroot /host | ouch)
i have a small 1.3Ghz x2 /6GB mem notebook and i didn't want to install stuff like mutillidae and mess around with versions of php potentially corrupt my vhosts and site on apache , that's why i've chosen to set up docker i also know there's a mutillidae img, webgoat etc that runs ok out of the box

marxenegls commented Dec 2, 2017

kept getting permission denied at editing apt/sources i know it should be an extra entry under apt/sources.list.d and

sudo touch create file docker_ce.list first than echo "deb [arch=amd64] https://download.docker.com/linux/debian stretch stable" >> /etc/apt/sources.list.d/docker_ce.list ..
sudo gpasswd -a $USER docker ( -d to remove)
...to run docker without sudo but keep in mind it is a risk (https://www.projectatomic.io/blog/2015/08/why-we-dont-let-non-root-users-run-docker-in-centos-fedora-or-rhel/)
(docker run -ti --privileged -v /:/host fedora chroot /host | ouch)
i have a small 1.3Ghz x2 /6GB mem notebook and i didn't want to install stuff like mutillidae and mess around with versions of php potentially corrupt my vhosts and site on apache , that's why i've chosen to set up docker i also know there's a mutillidae img, webgoat etc that runs ok out of the box

@JaewoongMoon

This comment has been minimized.

Show comment
Hide comment
@JaewoongMoon

JaewoongMoon commented Jan 19, 2018

Thanks!

@Rovel

This comment has been minimized.

Show comment
Hide comment
@Rovel

Rovel Jan 24, 2018

I'm very happy!
Thanks my friend

Rovel commented Jan 24, 2018

I'm very happy!
Thanks my friend

@sinwe

This comment has been minimized.

Show comment
Hide comment
@sinwe

sinwe Mar 3, 2018

I keep getting following error

Setting up docker-ce (17.12.1ce-0debian) ...
Job for docker.service failed because the control process exited with error code.
See "systemctl status docker.service" and "journalctl -xe" for details.
invoke-rc.d: initscript docker, action "start" failed.
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Sat 2018-03-03 22:58:16 +08; 10ms ago
Docs: https://docs.docker.com
Process: 32576 ExecStart=/usr/bin/dockerd -H fd:// (code=exited, status=1/FAILURE)
Main PID: 32576 (code=exited, status=1/FAILURE)
dpkg: error processing package docker-ce (--configure):
installed docker-ce package post-installation script subprocess returned error exit status 1

sinwe commented Mar 3, 2018

I keep getting following error

Setting up docker-ce (17.12.1ce-0debian) ...
Job for docker.service failed because the control process exited with error code.
See "systemctl status docker.service" and "journalctl -xe" for details.
invoke-rc.d: initscript docker, action "start" failed.
● docker.service - Docker Application Container Engine
Loaded: loaded (/lib/systemd/system/docker.service; disabled; vendor preset: disabled)
Active: activating (auto-restart) (Result: exit-code) since Sat 2018-03-03 22:58:16 +08; 10ms ago
Docs: https://docs.docker.com
Process: 32576 ExecStart=/usr/bin/dockerd -H fd:// (code=exited, status=1/FAILURE)
Main PID: 32576 (code=exited, status=1/FAILURE)
dpkg: error processing package docker-ce (--configure):
installed docker-ce package post-installation script subprocess returned error exit status 1

@floppyfish212

This comment has been minimized.

Show comment
Hide comment
@floppyfish212

floppyfish212 Mar 13, 2018

Good stuff, mate!

floppyfish212 commented Mar 13, 2018

Good stuff, mate!

@wadleo

This comment has been minimized.

Show comment
Hide comment
@wadleo

wadleo Mar 31, 2018

great, it works well, thanks

wadleo commented Mar 31, 2018

great, it works well, thanks

@hamaMk

This comment has been minimized.

Show comment
Hide comment
@hamaMk

hamaMk Apr 8, 2018

thanks a lot...

hamaMk commented Apr 8, 2018

thanks a lot...

@chekamarue

This comment has been minimized.

Show comment
Hide comment
@chekamarue

chekamarue Apr 29, 2018

worked very well
thanks

chekamarue commented Apr 29, 2018

worked very well
thanks

@StevensDotB

This comment has been minimized.

Show comment
Hide comment
@StevensDotB

StevensDotB Jul 25, 2018

I really appreciate your help. It works fine! :D

StevensDotB commented Jul 25, 2018

I really appreciate your help. It works fine! :D

@GoncaloPT

This comment has been minimized.

Show comment
Hide comment
@GoncaloPT

GoncaloPT Sep 18, 2018

Thanks, worked like a charm!

GoncaloPT commented Sep 18, 2018

Thanks, worked like a charm!

@lv7777

This comment has been minimized.

Show comment
Hide comment
@lv7777

lv7777 Sep 23, 2018

thanks 👍
and can use 2018.3a or 2018.2 ...etc

lv7777 commented Sep 23, 2018

thanks 👍
and can use 2018.3a or 2018.2 ...etc

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment