dwm volume control with hardware multimedia keys (pipewire, pulseaudio, amixer and light as an extra)

dwm_config_pulseaudio.h

/**
 * dwmconfig.h 
 * Hardware multimedia keys
 */
/* Somewhere at the beginning of config.h include: */

/* 
 You obviously need the X11 development packages installed, X11proto in particular, but 
 here is the location of the keysyms header upstream copy if you can't bother 
 using the contents of your own hard drive. ;-P
 
 https://cgit.freedesktop.org/xorg/proto/x11proto/tree/XF86keysym.h
*/

#include <X11/XF86keysym.h>

/* If you use pipewire add somewhere in your constants definition section. Use "wpctl status" to
   find out the real sink ID, 0 is a placeholder here. */
static const char *upvol[]      = { "/usr/bin/wpctl",   "set-volume", "0",      "5%+",      NULL };
static const char *downvol[]    = { "/usr/bin/wpctl",   "set-volume", "0",      "5%-",      NULL };
static const char *mutevol[]    = { "/usr/bin/wpctl",   "set-mute",   "0",      "toggle",   NULL };

/* czardien made it work with @DEFAULT_AUDIO_SINK@ */
static const char *upvol[]      = { "/usr/bin/wpctl",   "set-volume", "@DEFAULT_AUDIO_SINK@",      "5%+",      NULL };
static const char *downvol[]    = { "/usr/bin/wpctl",   "set-volume", "@DEFAULT_AUDIO_SINK@",      "5%-",      NULL };
static const char *mutevol[]    = { "/usr/bin/wpctl",   "set-mute",   "@DEFAULT_AUDIO_SINK@",      "toggle",   NULL };

/* If you use pulsaudio add somewhere in your constants definition section instead. */
static const char *upvol[]      = { "/usr/bin/pactl",   "set-sink-volume", "0",      "+5%",      NULL };
static const char *downvol[]    = { "/usr/bin/pactl",   "set-sink-volume", "0",      "-5%",      NULL };
static const char *mutevol[]    = { "/usr/bin/pactl",   "set-sink-mute",   "0",      "toggle",   NULL };

/* AidenThing suggests using this general solution for dynamically changing outputs. */
static const char *upvol[] = { "/usr/bin/pactl", "set-sink-volume", "@DEFAULT_SINK@", "+5%", NULL };
static const char *downvol[] = { "/usr/bin/pactl", "set-sink-volume", "@DEFAULT_SINK@", "-5%", NULL };
static const char *mutevol[] = { "/usr/bin/pactl", "set-sink-mute", "@DEFAULT_SINK@", "toggle", NULL };

/* If you use amixer, use this instead. Thanks go to DaniOrt3ga. */
static const char *upvol[]      = { "/usr/bin/amixer",  "set", "Master", "5%+", NULL };
static const char *downvol[]    = { "/usr/bin/amixer",  "set", "Master", "5%-", NULL };
static const char *mutevol[]    = { "/usr/bin/amixerl", "set", "Master", "toggle", NULL };

/* To use light add this to the constant definition section. Thanks Hritik14. */
static const char *light_up[]   = { "/usr/bin/light",   "-A", "5", NULL };
static const char *light_down[] = { "/usr/bin/light",   "-U", "5", NULL };


/* Add to keys[] array. With 0 as modifier, you are able to use the keys directly. */
static Key keys[] = {
	{ 0,                       XF86XK_AudioLowerVolume, spawn, {.v = downvol } },
	{ 0,                       XF86XK_AudioMute, spawn, {.v = mutevol } },
	{ 0,                       XF86XK_AudioRaiseVolume, spawn, {.v = upvol   } },
};

/* If you have a small laptop keyboard or don't want to spring your fingers too far away. */
static Key keys[] = {
	{ MODKEY,                       XK_F11, spawn, {.v = downvol } },
	{ MODKEY,                       XK_F9,  spawn, {.v = mutevol } },
	{ MODKEY,                       XK_F12, spawn, {.v = upvol   } },
};

/* To use light add this to the keys[] array. Thanks Hritik14. */
static Key keys[] = {
	{ 0,				XF86XK_MonBrightnessUp,		spawn,	{.v = light_up} },
	{ 0,				XF86XK_MonBrightnessDown,	spawn,	{.v = light_down} },
};

What are the keys to change vol?

Thanks, it work on my laptop.

KINO

Thanks! It helped!

Thanks bro, it helpful.
I want ask you if can I use it because I am not finding the licencing?

thanks it helped a lot!
i have a problem... how can i change the mute and volume of Headphone and Master simultaneously? because when i mute when my Headphone is connected it doesn't mute it...

So, this question might be stupid, but where is the constants definition section? I can't seem to find it.

@oyMarcel Look for the section where constants are defined. The C syntax is static const char *pointer.

@ahmedsamyh You'll need to write a small script or program in the language of your choice that executes what you need and map it to a key combination in your keyboard, I advice you write another to undo it as well ;-).

Worked like a charm!

Amazing! Thanks.

This works! Thanks.

PERFECT

That helped me. Thank you so much :-D

In case you use amixer:

static const char *upvol[] = { "/usr/bin/amixer", "set", "Master", "5%+", NULL };
static const char *downvol[] = { "/usr/bin/amixer", "set", "Master", "5%-", NULL };
static const char *mutevol[] = { "/usr/bin/amixer", "set", "Master", "toggle", NULL };

Check the +/- position

i used amixer long time ago but thanks :)

how do i install the x11 dev thing on arch?

GOD BLESS YOU DUDE!

If you're using pulse and your default is not always the same, use:

static const char *upvol[] = { "/usr/bin/pactl", "set-sink-volume", "@DEFAULT_SINK@", "+5%", NULL };
static const char *downvol[] = { "/usr/bin/pactl", "set-sink-volume", "@DEFAULT_SINK@", "-5%", NULL };
static const char *mutevol[] = { "/usr/bin/pactl", "set-sink-mute", "@DEFAULT_SINK@", "toggle", NULL };

With pipewire I ended up using @DEFAULT_AUDIO_SINK@ so I didn't have to fetch the Audio sink ID with wpctl status; seems to be working:

static const char *upvol[]      = { "/usr/bin/wpctl",   "set-volume", "@DEFAULT_AUDIO_SINK@",      "5%+",      NULL };
static const char *downvol[]    = { "/usr/bin/wpctl",   "set-volume", "@DEFAULT_AUDIO_SINK@",      "5%-",      NULL };
static const char *mutevol[]    = { "/usr/bin/wpctl",   "set-mute",   "@DEFAULT_AUDIO_SINK@",      "toggle",   NULL };

Edit: and of course thanks a million for the gist

@czardien thank you for the contribution and you're very welcome. 😁

@AidenThing thank you for your contribution and my apologies for not seeing it before.

For wpctl it's wise to set a maximum limit for set-volume; above 100% distortion will creep in, and just for safety too. Add "-l 1.0" to the wpctl command to increase volume to avoid that.

Awesome! Thank you so much.

In case someone wonders how to Play/Pause/Skip/GoBack on your fav media player:

static const char *playpause[]  = { "/usr/bin/playerctl", "play-pause", NULL };
static const char *play_next[]  = { "/usr/bin/playerctl", "next", NULL };
static const char *play_prev[]  = { "/usr/bin/playerctl", "previous", NULL};

static Key keys[] = {
	{ 0,					   XF86XK_AudioPlay, spawn, {.v = playpause } },
	{ 0,					   XF86XK_AudioPrev, spawn, {.v = play_prev } },
	{ 0,					   XF86XK_AudioNext, spawn, {.v = play_next } },
};

Also install playerctl.