| init_config: | |
| mibs_folder: /mibs | |
| profiles: | |
| generic: | |
| definition_file: _generic-host-resources.yaml | |
| instances: | |
| - ip_address: $REPLACE_WITH_SYNOLOGY_IP_ADDRESS | |
| community_string: public | |
| snmp_version: 2 |
This is an initiative to create an overview of the issues found with the Creality CR-6 SE.
As of this writing (2020-09-19) the large number of the motherboard issues have not been publicly acknowledged. Hopefully this overview forces Creality to acknowledge the issues with the Creality CR-6 SE leveling free 3d printer.
According to Creality all issues should be resolved in the newer models:
Here are the improvements we did as below:
With most of the CR-6 SE issues being due to bad wiring or loose/too tight screws I feel like it is time for a good post-unboxing checklist, to be walked through pre-assembly. Even though I do not have my unit shipped yet, I've seen enough issues and fixes that I can compile this post.
I initially posted this on the independent CR-6 community Facebook group but since not everyone wants to use Facebook (which I totally understand), I will repost it here. I mirrored most of the relevant content of Facebook to imgur.
If you have any feedback or anything that needs to be added, please let me know and I will amend this post!
Note: There are some known issues with this printer - please read the entire guide. (It is long, I know, but this is a necessary evil!)
| init_config: | |
| mibs_folder: /mibs | |
| profiles: | |
| generic: | |
| definition_file: _generic-host-resources.yaml | |
| instances: | |
| - ip_address: $REPLACE_WITH_SYNOLOGY_IP_ADDRESS | |
| community_string: public | |
| snmp_version: 2 |
| #!/bin/bash | |
| # Download binaryfate's GPG key | |
| wget -q -O binaryfate.asc https://raw.githubusercontent.com/monero-project/monero/master/utils/gpg_keys/binaryfate.asc | |
| # Verify binaryfate's GPG key | |
| echo "1. Verify binaryfate's GPG key: " | |
| gpg --keyid-format long --with-fingerprint binaryfate.asc | |
| # Prompt user to confirm the key matches that posted on https://src.getmonero.org/resources/user-guides/verification-allos-advanced.html | |
| echo |
| app_name | bundle_id | sdk | deployment_target | uses_swift | percentage_swift | main_binary_uses_swift | is_game | executable | |
|---|---|---|---|---|---|---|---|---|---|
| 30 Day Fitness | com.vigorapps.30DayFitness | iphoneos12.0 | 10 | TRUE | 31% | TRUE | FALSE | ThirtyDaysFitness | |
| 8 Ball Pool | com.miniclip.8ballpoolmult | iphoneos11.3 | 8 | FALSE | 0% | FALSE | TRUE | pool | |
| Amazon | com.amazon.Amazon | iphoneos11.4 | 9 | FALSE | 0% | FALSE | FALSE | Amazon | |
| Amazon Alexa | com.amazon.echo | iphoneos11.2 | 10 | TRUE | 28% | TRUE | FALSE | AlexaMobileiOS-prod | |
| Astro Palmistry & Horoscope | com.gfb.horoscope | iphoneos12.1 | 8 | FALSE | 0% | FALSE | FALSE | horoscope | |
| Ball Blast | com.nomonkeys.ball-blast | iphoneos12.1 | 9 | FALSE | 0% | FALSE | TRUE | ball-blast | |
| BetterMen | com.betterme.bettermen | iphoneos12.0 | 10 | TRUE | 74% | TRUE | FALSE | BetterMen | |
| BitLife | com.wtfapps.apollo16 | iphoneos12.1 | 8 | FALSE | 0% | FALSE | TRUE | Apollo16 | |
| Bitmoji | com.bitstrips.imoji | iphoneos11.4 | 10 | TRUE | 20% | TRUE | FALSE | imoji |
| const DOCUMENT_EVENTS = [ | |
| 'mousemove', 'mousedown', 'click', | |
| 'touchmove', 'touchstart', 'touchend', | |
| 'keydown', 'keypress' | |
| ]; | |
| export class IdleTimer { | |
| constructor(onIdleTimeout, timeout) { | |
| this.onIdleTimeout = onIdleTimeout; | |
| this.timeout = timeout; |
| This guide assumes that you have already set up a Ubiquiti Unifi VPN following the guide: | |
| https://help.ubnt.com/hc/en-us/articles/115005445768-UniFi-L2TP-Remote-Access-VPN-with-USG-as-RADIUS-Server | |
| To configure a Linux machine to be able to connect remotely I followed these steps. This guide was written for Debian 8. | |
| - In Debian install the "xl2tpd" and "strongswan" packages. | |
| - Edit /etc/ipsec.conf to add the connection: | |
| conn YOURVPNCONNECTIONNAME |
| server=127.0.0.1#5053 |
| git describe --exact-match --tags 2> /dev/null || git rev-parse --short HEAD |