Intel PRO/1000 PF Server Adapter on Intel ARK
This is a NIC with an LC connector for 1000BASE-SX multi-mode fiber connectivity.
Take advantage of PCI Express (PCIe*) server slots and fiber-optic connectivity to enhance network performance with the Intel® PRO/1000 PF Server Adapter. The dedicated input/output (I/O) bandwidth of the PCIe in this adapter ensures priority performance, without bus sharing, for Gigabit Ethernet connectivity in fiber-optic networks.
| [philipp@lion ~]$ sudo ethtool enp4s0 | |
| Settings for enp4s0: | |
| Supported ports: [ FIBRE ] | |
| Supported link modes: 1000baseT/Full | |
| Supported pause frame use: No | |
| Supports auto-negotiation: Yes | |
| Advertised link modes: 1000baseT/Full | |
| Advertised pause frame use: No | |
| Advertised auto-negotiation: Yes | |
| Speed: 1000Mb/s | |
| Duplex: Full | |
| Port: FIBRE | |
| PHYAD: 0 | |
| Transceiver: external | |
| Auto-negotiation: on | |
| Supports Wake-on: pumbg | |
| Wake-on: g | |
| Current message level: 0x00000007 (7) | |
| drv probe link | |
| Link detected: yes |
| [philipp@lion ~]$ sudo lspci -vv | |
| 01:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Fiber) (rev 06) | |
| Subsystem: Intel Corporation PRO/1000 PF Server Adapter | |
| Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ | |
| Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- | |
| Latency: 0, Cache Line Size: 64 bytes | |
| Interrupt: pin A routed to IRQ 49 | |
| Region 0: Memory at f7c40000 (32-bit, non-prefetchable) [size=128K] | |
| Region 1: Memory at f7c20000 (32-bit, non-prefetchable) [size=128K] | |
| Region 2: I/O ports at e000 [size=32] | |
| Expansion ROM at f7c00000 [disabled] [size=128K] | |
| Capabilities: [c8] Power Management version 2 | |
| Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) | |
| Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- | |
| Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ | |
| Address: 00000000fee003f8 Data: 0000 | |
| Capabilities: [e0] Express (v1) Endpoint, MSI 00 | |
| DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us | |
| ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- | |
| DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+ | |
| RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ | |
| MaxPayload 128 bytes, MaxReadReq 512 bytes | |
| DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- | |
| LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <4us, L1 <64us | |
| ClockPM- Surprise- LLActRep- BwNot- | |
| LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ | |
| ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- | |
| LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- | |
| Capabilities: [100 v1] Advanced Error Reporting | |
| UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- | |
| UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- | |
| UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- | |
| CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- | |
| CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- | |
| AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- | |
| Capabilities: [140 v1] Device Serial Number 00-15-17-ff-ff-bc-9e-d0 | |
| Kernel driver in use: e1000e | |
| Kernel modules: e1000e |