UDOO quad component details inspected using Arch Linux ARM

cpuinfo

[root@alarm ~]# cat /proc/cpuinfo
Processor       : ARMv7 Processor rev 10 (v7l)
processor       : 0
BogoMIPS        : 1988.29

processor       : 1
BogoMIPS        : 1988.29

processor       : 2
BogoMIPS        : 1988.29

processor       : 3
BogoMIPS        : 1988.29

Features        : swp half thumb fastmult vfp edsp neon vfpv3
CPU implementer : 0x41
CPU architecture: 7
CPU variant     : 0x2
CPU part        : 0xc09
CPU revision    : 10

Hardware        : SECO i.Mx6 UDOO Board
Revision        : 63012
Serial          : 122bc789d84d004d

dmesg

The following is the dmesg output of my UDOO running Arch Linux with
the newer kernel 3.17.0-1-ARCH:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.17.0-1-ARCH (nobody@root-chroot-copy) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP Tue Oct 7 00:41:53 MDT 2014
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Udoo i.MX6 Quad Board
[    0.000000] cma: Reserved 16 MiB at 3e800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 262144
[    0.000000] free_area_init_node: node 0, pgdat c0efa2c0, node_mem_map edff0000
[    0.000000]   Normal zone: 1520 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 194560 pages, LIFO batch:31
[    0.000000]   HighMem zone: 528 pages used for memmap
[    0.000000]   HighMem zone: 67584 pages, LIFO batch:15
[    0.000000] PERCPU: Embedded 9 pages/cpu @edfb1000 s13632 r8192 d15040 u36864
[    0.000000] pcpu-alloc: s13632 r8192 d15040 u36864 alloc=9*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 260624
[    0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 rw rootwait mem=1024M video=mxcfb0:dev=hdmi,1920x1080M@60,bpp=32
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 2097152 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 1004548K/1048576K available (9567K kernel code, 1030K rwdata, 3792K rodata, 957K init, 916K bss, 44028K reserved, 270336K highmem)
[    0.000000] Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
    lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
    pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
    modules : 0xbf000000 - 0xbfe00000   (  14 MB)
      .text : 0xc0008000 - 0xc0d13fa8   (13360 kB)
      .init : 0xc0d14000 - 0xc0e03540   ( 958 kB)
      .data : 0xc0e04000 - 0xc0f05b98   (1031 kB)
       .bss : 0xc0f05b98 - 0xc0fead80   ( 917 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] L2C-310 erratum 769419 enabled
[    0.000000] L2C-310 enabling early BRESP for Cortex-A9
[    0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[    0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[    0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[    0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[    0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76070001
[    0.000000] GIC physical location is 0xa01000
[    0.000000] Switching to timer-based delay loop, resolution 15ns
[    0.000007] sched_clock: 32 bits at 66MHz, resolution 15ns, wraps every 65075262448ns
[    0.002437] Console: colour dummy device 80x30
[    0.002467] Calibrating delay loop (skipped), value calculated using timer frequency.. 132.00 BogoMIPS (lpj=330000)
[    0.002487] pid_max: default: 32768 minimum: 301
[    0.002777] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.002794] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.003544] Initializing cgroup subsys memory
[    0.003578] Initializing cgroup subsys devices
[    0.003599] Initializing cgroup subsys freezer
[    0.003617] Initializing cgroup subsys net_cls
[    0.003636] Initializing cgroup subsys blkio
[    0.003653] Initializing cgroup subsys perf_event
[    0.003670] Initializing cgroup subsys net_prio
[    0.003740] CPU: Testing write buffer coherency: ok
[    0.003777] ftrace: allocating 34782 entries in 103 pages
[    0.065818] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.065947] Setting up static identity map for 0x10898018 - 0x108980b0
[    0.074607] CPU1: Booted secondary processor
[    0.074643] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.075526] CPU2: Booted secondary processor
[    0.075554] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.076445] CPU3: Booted secondary processor
[    0.076473] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.076559] Brought up 4 CPUs
[    0.076593] SMP: Total of 4 processors activated.
[    0.076602] CPU: All CPU(s) started in SVC mode.
[    0.077325] devtmpfs: initialized
[    0.081510] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.089965] xor: measuring software checksum speed
[    0.139297]    arm4regs  :  1208.800 MB/sec
[    0.189293]    8regs     :   920.800 MB/sec
[    0.239293]    32regs    :   972.000 MB/sec
[    0.289296]    neon      :   890.400 MB/sec
[    0.289308] xor: using function: arm4regs (1208.800 MB/sec)
[    0.289424] pinctrl core: initialized pinctrl subsystem
[    0.289840] regulator-dummy: no parameters
[    0.297342] NET: Registered protocol family 16
[    0.300591] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.302342] cpuidle: using governor ladder
[    0.302362] cpuidle: using governor menu
[    0.302752] CPU identified as i.MX6Q, silicon rev 1.2
[    0.310906] vdd1p1: 800 <--> 1375 mV at 1100 mV 
[    0.311346] vdd3p0: 2800 <--> 3150 mV at 3000 mV 
[    0.311780] vdd2p5: 2000 <--> 2750 mV at 2400 mV 
[    0.312223] vddarm: 725 <--> 1450 mV at 1150 mV 
[    0.312676] vddpu: 725 <--> 1450 mV at 1150 mV 
[    0.313113] vddsoc: 725 <--> 1450 mV at 1175 mV 
[    0.320657] No ATAGs?
[    0.320697] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.320708] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.320915] EXYNOS: PMU not supported
[    0.322554] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[    0.434778] raid6: int32x1     90 MB/s
[    0.519484] raid6: int32x2    127 MB/s
[    0.604314] raid6: int32x4    125 MB/s
[    0.689584] raid6: int32x8    143 MB/s
[    0.774318] raid6: neonx1     594 MB/s
[    0.859306] raid6: neonx2     671 MB/s
[    0.944479] raid6: neonx4     339 MB/s
[    1.029550] raid6: neonx8     235 MB/s
[    1.029561] raid6: using algorithm neonx2 (671 MB/s)
[    1.029571] raid6: using intx1 recovery algorithm
[    1.033477] mxs-dma 110000.dma-apbh: initialized
[    1.034037] edma-dma-engine edma-dma-engine.0: Can't allocate PaRAM dummy slot
[    1.034066] edma-dma-engine: probe of edma-dma-engine.0 failed with error -22
[    1.034853] usb_h1_vbus: 5000 mV 
[    1.038334] vgaarb: loaded
[    1.039415] SCSI subsystem initialized
[    1.039664] libata version 3.00 loaded.
[    1.040000] usbcore: registered new interface driver usbfs
[    1.040077] usbcore: registered new interface driver hub
[    1.040208] usbcore: registered new device driver usb
[    1.041806] i2c i2c-1: IMX I2C adapter registered
[    1.042623] media: Linux media interface: v0.10
[    1.042693] Linux video capture interface: v2.00
[    1.042810] pps_core: LinuxPPS API ver. 1 registered
[    1.042822] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.042854] PTP clock support registered
[    1.042960] EDAC MC: Ver: 3.0.0
[    1.044497] exynos_iommu_init: Failed to register exynos-iommu driver.
[    1.044963] Advanced Linux Sound Architecture Driver Initialized.
[    1.045954] Switched to clocksource mxc_timer1
[    1.113255] NET: Registered protocol family 2
[    1.114210] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.114296] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.114433] TCP: Hash tables configured (established 8192 bind 8192)
[    1.114526] TCP: reno registered
[    1.114544] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.114603] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.114877] NET: Registered protocol family 1
[    1.115245] RPC: Registered named UNIX socket transport module.
[    1.115257] RPC: Registered udp transport module.
[    1.115265] RPC: Registered tcp transport module.
[    1.115274] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.115309] PCI: CLS 0 bytes, default 64
[    1.116262] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[    1.118777] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    1.126857] zpool: loaded
[    1.126877] zbud: loaded
[    1.127592] VFS: Disk quotas dquot_6.5.2
[    1.127795] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.129742] NFS: Registering the id_resolver key type
[    1.129798] Key type id_resolver registered
[    1.129808] Key type id_legacy registered
[    1.129842] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.130534] msgmni has been set to 1466
[    1.132682] bounce: pool size: 64 pages
[    1.132886] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.133058] io scheduler noop registered
[    1.133077] io scheduler deadline registered
[    1.133308] io scheduler cfq registered (default)
[    1.144602] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[    1.144624] imx-sdma 20ec000.sdma: firmware not found
[    1.147526] imx-sdma 20ec000.sdma: initialized
[    1.228897] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    1.231151] Serial: IMX driver
[    1.231617] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 59, base_baud = 5000000) is a IMX
[    2.089983] console [ttymxc1] enabled
[    2.095069] serial: Freescale lpuart driver
[    2.099588] [drm] Initialized drm 1.1.0 20060810
[    2.104974] galcore 130000.gpu: Using settings from Flattened Device Tree (FDT).
[    2.112579] galcore 130000.gpu: driver v4.6.6, initializing
[    2.118199] galcore options:
[    2.121106]   irqLine           = 41
[    2.124690]   registerMemBase   = 0x00130000
[    2.128983]   registerMemSize   = 0x00004000
[    2.133275]   irqLine2D         = 42
[    2.136874]   registerMemBase2D = 0x00134000
[    2.141166]   registerMemSize2D = 0x00004000
[    2.145444]   contiguousSize    = 4194304
[    2.149475]   contiguousBase    = 0x00000000
[    2.153767]   bankSize          = 0x02000000
[    2.158058]   fastClear         = -1
[    2.161656]   compression       = -1
[    2.165240]   signal            = 48
[    2.168836]   baseAddress       = 0x00000000
[    2.173128]   physSize          = 0x00000000
[    2.210294] galcore 130000.gpu: GPU initialized, clocked at 594MHz
[    2.221469] loop: module loaded
[    2.226254] Loading iSCSI transport class v2.0-870.
[    2.231626] iscsi: registered transport (tcp)
[    2.236923] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
[    2.244885] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
[    2.252922] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
[    2.261131] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[    2.271641] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[    2.278670] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[    2.287493] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst 
[    2.298123] scsi host0: ahci_platform
[    2.302202] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 71
[    2.315986] 2188000.ethernet supply phy not found, using dummy regulator
[    2.327918] libphy: fec_enet_mii_bus: probed
[    2.332872] fec 2188000.ethernet eth0: registered PHC device 0
[    2.340297] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.346877] ehci-pci: EHCI PCI platform driver
[    2.351421] ehci-platform: EHCI generic platform driver
[    2.356930] ehci-omap: OMAP-EHCI Host Controller driver
[    2.362344] ehci-orion: EHCI orion driver
[    2.366539] ehci-exynos: EHCI EXYNOS driver
[    2.370917] tegra-ehci: Tegra EHCI driver
[    2.375144] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.381373] ohci-pci: OHCI PCI platform driver
[    2.385898] ohci-platform: OHCI generic platform driver
[    2.391320] ohci-exynos: OHCI EXYNOS driver
[    2.395697] ohci-omap3: OHCI OMAP3 driver
[    2.400348] usbcore: registered new interface driver usb-storage
[    2.412470] ci_hdrc ci_hdrc.0: doesn't support gadget
[    2.417579] ci_hdrc ci_hdrc.0: EHCI Host Controller
[    2.422740] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[    2.436004] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[    2.441663] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.448497] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.455752] usb usb1: Product: EHCI Host Controller
[    2.460660] usb usb1: Manufacturer: Linux 3.17.0-1-ARCH ehci_hcd
[    2.466695] usb usb1: SerialNumber: ci_hdrc.0
[    2.471767] hub 1-0:1.0: USB hub found
[    2.475570] hub 1-0:1.0: 1 port detected
[    2.482307] snvs_rtc 20cc034.snvs-rtc-lp: rtc core: registered 20cc034.snvs-rtc-lp as rtc0
[    2.490911] i2c /dev entries driver
[    2.498693] thermal thermal_zone0: failed to read out thermal zone 0
[    2.507255] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=1)
[    2.515161] sdhci: Secure Digital Host Controller Interface driver
[    2.521377] sdhci: Copyright(c) Pierre Ossman
[    2.526649] Synopsys Designware Multimedia Card Interface Driver
[    2.533376] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.539770] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[    2.549167] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found
[    2.555383] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
[    2.595994] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[    2.604081] ledtrig-cpu: registered to indicate activity on CPUs
[    2.611255] hidraw: raw HID events driver (C) Jiri Kosina
[    2.617014] usbcore: registered new interface driver usbhid
[    2.622618] usbhid: USB HID core driver
[    2.627219] ashmem: initialized
[    2.633386] oprofile: using arm/armv7-ca9
[    2.637718] TCP: cubic registered
[    2.641772] NET: Registered protocol family 10
[    2.647436] mip6: Mobile IPv6
[    2.650434] NET: Registered protocol family 17
[    2.655050] Key type dns_resolver registered
[    2.658520] mmc0: host does not support reading read-only switch. assuming write-enable.
[    2.664467] mmc0: new high speed SDHC card at address 0001
[    2.664938] mmcblk0: mmc0:0001 00000 29.8 GiB 
[    2.678608]  mmcblk0: p1
[    2.682662] ThumbEE CPU extension supported.
[    2.686987] Registering SWP/SWPB emulation handler
[    2.692323] registered taskstats version 1
[    2.698729] Btrfs loaded
[    2.702282] snvs_rtc 20cc034.snvs-rtc-lp: setting system clock to 2014-10-11 17:28:11 UTC (1413048491)
[    2.711635] sr_init: No PMIC hook to init smartreflex
[    2.716819] sr_init: platform driver register failed for SR
[    2.730718] Unable to find PPMU node
[    2.734417] exynos5-bus-int: probe of exynos5-bus-int failed with error -2
[    2.741403] PM: Hibernation image not present or could not be loaded.
[    2.741600] ALSA device list:
[    2.744576]   No soundcards found.
[    2.786027] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[    2.806011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.885786] ata1.00: ATA-8: ST9640320AS, 0001SDM1, max UDMA/133
[    2.891739] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.921438] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[    2.928170] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.935993] hub 1-1:1.0: USB hub found
[    2.939930] hub 1-1:1.0: 4 ports detected
[    2.941937] ata1.00: configured for UDMA/133
[    2.942318] scsi 0:0:0:0: Direct-Access     ATA      ST9640320AS      SDM1 PQ: 0 ANSI: 5
[    2.943074] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.943342] sd 0:0:0:0: [sda] Write Protect is off
[    2.943352] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.943468] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.944251] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.024434]  sda: sda1
[    3.027774] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.040803] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    3.049572] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    3.066358] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[    3.074530] VFS: Mounted root (ext4 filesystem) on device 179:1.
[    3.083422] devtmpfs: mounted
[    3.087123] Freeing unused kernel memory: 956K (c0d14000 - c0e03000)
[    3.266194] usb 1-1.1: new full-speed USB device number 3 using ci_hdrc
[    3.360222] random: systemd urandom read with 41 bits of entropy available
[    3.378941] usb 1-1.1: New USB device found, idVendor=2341, idProduct=0043
[    3.380548] systemd[1]: systemd 216 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN )
[    3.380813] systemd[1]: Detected architecture 'arm'.
[    3.408404] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[    3.408411] usb 1-1.1: Manufacturer: Arduino (www.arduino.cc)
[    3.408421] usb 1-1.1: SerialNumber: 74137363737351907291
[    3.437376] systemd[1]: Set hostname to <udoo>.
[    3.511190] usb 1-1.2: new high-speed USB device number 4 using ci_hdrc
[    3.838190] usb 1-1.2: New USB device found, idVendor=046d, idProduct=0809
[    3.845109] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=2
[    3.852440] usb 1-1.2: SerialNumber: E86EA363
[    3.941316] usb 1-1.3: new high-speed USB device number 5 using ci_hdrc
[    4.040695] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    4.059161] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[    4.067146] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    4.068930] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5370
[    4.068939] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.068945] usb 1-1.3: Product: 802.11 n WLAN
[    4.068950] usb 1-1.3: Manufacturer: Ralink
[    4.068955] usb 1-1.3: SerialNumber: 1.0
[    4.101540] systemd[1]: Expecting device dev-ttymxc1.device...
[    4.121125] systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
[    4.141098] systemd[1]: Starting Remote File Systems.
[    4.156076] systemd[1]: Reached target Remote File Systems.
[    4.161840] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[    4.191074] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.200617] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[    4.208859] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    4.216877] systemd[1]: Starting Paths.
[    4.231085] systemd[1]: Reached target Paths.
[    4.235522] systemd[1]: Starting Encrypted Volumes.
[    4.256067] systemd[1]: Reached target Encrypted Volumes.
[    4.261587] systemd[1]: Starting Swap.
[    4.276073] systemd[1]: Reached target Swap.
[    4.280423] systemd[1]: Starting Root Slice.
[    4.331111] systemd[1]: Created slice Root Slice.
[    4.335916] systemd[1]: Starting Device-mapper event daemon FIFOs.
[    4.356089] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    4.362748] systemd[1]: Starting Delayed Shutdown Socket.
[    4.381076] systemd[1]: Listening on Delayed Shutdown Socket.
[    4.386946] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[    4.406087] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.413173] systemd[1]: Starting Journal Socket (/dev/log).
[    4.431083] systemd[1]: Listening on Journal Socket (/dev/log).
[    4.437129] systemd[1]: Starting LVM2 metadata daemon socket.
[    4.456084] systemd[1]: Listening on LVM2 metadata daemon socket.
[    4.462320] systemd[1]: Starting udev Kernel Socket.
[    4.481071] systemd[1]: Listening on udev Kernel Socket.
[    4.486524] systemd[1]: Starting udev Control Socket.
[    4.506094] systemd[1]: Listening on udev Control Socket.
[    4.511623] systemd[1]: Starting User and Session Slice.
[    4.531106] systemd[1]: Created slice User and Session Slice.
[    4.537006] systemd[1]: Starting Journal Socket.
[    4.551066] systemd[1]: Listening on Journal Socket.
[    4.556233] systemd[1]: Starting System Slice.
[    4.571086] systemd[1]: Created slice System Slice.
[    4.576144] systemd[1]: Starting Remount Root and Kernel File Systems...
[    4.619870] systemd[1]: Started Load Kernel Modules.
[    4.625078] systemd[1]: Starting Apply Kernel Variables...
[    4.644171] systemd[1]: Mounted FUSE Control File System.
[    4.652148] systemd[1]: Mounting POSIX Message Queue File System...
[    4.673739] systemd[1]: Starting Setup Virtual Console...
[    4.694655] systemd[1]: Mounting Debug File System...
[    4.713977] systemd[1]: Mounted Configuration File System.
[    4.720556] systemd[1]: Mounted Huge Pages File System.
[    4.756650] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    4.783925] systemd[1]: Starting udev Coldplug all Devices...
[    4.803914] systemd[1]: Starting system-netctl\x2difplugd.slice.
[    4.826110] systemd[1]: Created slice system-netctl\x2difplugd.slice.
[    4.833103] systemd[1]: Starting system-getty.slice.
[    4.851100] systemd[1]: Created slice system-getty.slice.
[    4.856972] systemd[1]: Starting system-serial\x2dgetty.slice.
[    4.876134] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    4.884548] systemd[1]: Started Set Up Additional Binary Formats.
[    4.890803] systemd[1]: Starting Journal Service...
[    4.926144] systemd[1]: Started Journal Service.
[    5.550896] systemd-udevd[121]: starting version 216
[    5.812789] ipu_smfc_init: ioremap 0x02650000 -> f010e000
[    5.814304] imx-ipuv3 2400000.ipu: IPUv3H probed
[    5.816269] imxdrm: module is from the staging directory, the quality is unknown, you have been warned.
[    5.829043] ipu_smfc_init: ioremap 0x02a50000 -> f02fa000
[    5.830298] imx-ipuv3 2800000.ipu: IPUv3H probed
[    5.837115] imx_hdmi: module is from the staging directory, the quality is unknown, you have been warned.
[    5.961158] random: nonblocking pool is initialized
[    6.030718] cdc_acm 1-1.1:1.0: ttyACM0: USB ACM device
[    6.038756] usbcore: registered new interface driver cdc_acm
[    6.045042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    6.072345] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0809)
[    6.101323] input: UVC Camera (046d:0809) as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[    6.129411] cfg80211: Calling CRDA to update world regulatory domain
[    6.136619] usbcore: registered new interface driver uvcvideo
[    6.142472] USB Video Class driver (1.1.1)
[    6.257514] BTRFS: device label udoo-hdd devid 1 transid 13 /dev/sda1
[    6.287866] imx_ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned.
[    6.288933] imx_ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned.
[    6.289015] imx_ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned.
[    6.298087] imx_ipuv3_crtc: module is from the staging directory, the quality is unknown, you have been warned.
[    6.305469] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.305473] [drm] No driver support for vblank timestamp query.
[    6.306185] imx-drm display-subsystem: bound imx-ipuv3-crtc.0 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[    6.306781] imx-drm display-subsystem: bound imx-ipuv3-crtc.1 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[    6.307466] imx-drm display-subsystem: bound imx-ipuv3-crtc.4 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[    6.307564] imx-drm display-subsystem: bound imx-ipuv3-crtc.5 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[    6.311810] imx-hdmi 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    6.311960] imx-drm display-subsystem: bound 120000.hdmi (ops hdmi_ops [imx_hdmi])
[    6.312195] imx-drm display-subsystem: No connectors reported connected with modes
[    6.312203] [drm] Cannot find any crtc or sizes - going 1024x768
[    6.341198] usb 1-1.3: reset high-speed USB device number 5 using ci_hdrc
[    6.421377] Console: switching to colour frame buffer device 128x48
[    6.433863] imx-drm display-subsystem: fb0:  frame buffer device
[    6.439944] imx-drm display-subsystem: registered panic notifier
[    6.457561] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[    6.476043] [drm] Initialized imx-drm 1.0.0 20120507 on minor 0
[    6.508497] cfg80211: World regulatory domain updated:
[    6.512202] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[    6.520616] cfg80211:  DFS Master region: unset
[    6.525004] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.534786] cfg80211:   (2402000 KHz - 2472000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[    6.540557] usb 1-1.2: set resolution quirk: cval->res = 384
[    6.541227] usbcore: registered new interface driver snd-usb-audio
[    6.554380] cfg80211:   (2457000 KHz - 2482000 KHz @ 0 KHz), (N/A, 2000 mBm), (N/A)
[    6.554387] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    6.554392] cfg80211:   (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[    6.554398] cfg80211:   (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    6.554404] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    6.554415] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.554420] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    6.554803] cfg80211: Calling CRDA for country: DE
[    6.629918] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[    6.631692] usbcore: registered new interface driver rt2800usb
[    6.659722] cfg80211: Regulatory domain changed to country: DE
[    6.665607] cfg80211:  DFS Master region: ETSI
[    6.669933] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    6.679715] cfg80211:   (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    6.687796] cfg80211:   (5150000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    6.695860] cfg80211:   (5250000 KHz - 5350000 KHz @ 80000 KHz), (N/A, 2000 mBm), (0 s)
[    6.695869] cfg80211:   (5470000 KHz - 5725000 KHz @ 80000 KHz), (N/A, 2698 mBm), (0 s)
[    6.695881] cfg80211:   (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[    6.942774] BTRFS info (device sda1): enabling auto defrag
[    6.948330] BTRFS info (device sda1): disk space caching is enabled
[    7.158430] systemd-journald[111]: Received request to flush runtime journal from PID 1
[    7.956700] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:06, irq=-1)
[    7.973212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    8.240573] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    8.274987] nf_conntrack version 0.5.0 (15967 buckets, 63868 max)
[   11.956405] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
[   11.963957] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

ethtool

[root@udoo ~]# ethtool -i eth0

driver: fec
version: Revision: 1.0
firmware-version: 
bus-info: eth0
supports-statistics: yes
supports-test: no
supports-eeprom-access: no
supports-register-dump: no
supports-priv-flags: no


[root@udoo ~]# ethtool eth0

Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Supported pause frame use: Symmetric
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full 
                                100baseT/Half 100baseT/Full 
                                1000baseT/Full 
        Advertised pause frame use: Symmetric
        Advertised auto-negotiation: Yes
        Link partner advertised link modes:  10baseT/Half 10baseT/Full 
                                             100baseT/Half 100baseT/Full 
                                             1000baseT/Full 
        Link partner advertised pause frame use: No
        Link partner advertised auto-negotiation: Yes
        Speed: 1000Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 6
        Transceiver: external
        Auto-negotiation: on
        Link detected: yes

first-boot

The following test was the output of the serial
port when I started my installation of Arch Linux
with kernel Linux-3.0.35-4-ARCH for the first time:

U-Boot 2009.08 (Nov 23 2013 - 15:37:11) Arch Linux ARM

CPU: Freescale i.MX6 family TO1.2 at 792 MHz
Thermal sensor with ratio = 181
Temperature:   16 C, calibration data 0x57c4e969
mx6q pll1: 792MHz
mx6q pll2: 528MHz
mx6q pll3: 480MHz
mx6q pll8: 50MHz
ipg clock     : 66000000Hz
ipg per clock : 66000000Hz
uart clock    : 80000000Hz
cspi clock    : 60000000Hz
ahb clock     : 132000000Hz
axi clock   : 264000000Hz
emi_slow clock: 132000000Hz
ddr clock     : 528000000Hz
usdhc1 clock  : 198000000Hz
usdhc2 clock  : 198000000Hz
usdhc3 clock  : 198000000Hz
usdhc4 clock  : 198000000Hz
nfc clock     : 24000000Hz
Board: i.MX6Q-UDOO: unknown-board Board: 0x63012 [POR]
Boot Device: NOR
I2C:   ready
DRAM:   1 GB
MMC:   FSL_USDHC: 0,FSL_USDHC: 1,FSL_USDHC: 2,FSL_USDHC: 3
*** Warning - bad CRC or MMC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   got MAC address from IIM: 00:c0:de:ad:be:ef
FEC0 [PRIME]
Hit any key to stop autoboot:  0
mmc2 is current device
Loading file "/boot/boot.scr" from mmc device 2:1 xxc1
** File not found /boot/boot.scr
Loading file "/boot/uImage" from mmc device 2:1 xxc1
4386260 bytes read
## Booting kernel from Legacy Image at 10800000 ...
   Image Name:   Linux-3.0.35-4-ARCH
   Created:      2013-11-23   4:32:48 UTC
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    4386196 Bytes =  4.1 MB
   Load Address: 10008000
   Entry Point:  10008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.0.35-4-ARCH (nobody@root-chroot-copy) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Fri Nov 22 22:32:04 CST 2013
[    0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: SECO i.Mx6 UDOO Board
[    0.000000] Kernel ver: \n
[    0.000000] Ignoring unrecognised tag 0x41000901
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] CPU identified as i.MX6Q, silicon rev 1.2
[    0.000000] PERCPU: Embedded 7 pages/cpu @8c008000 s5984 r8192 d14496 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227328
[    0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 rootwait rw fixrtc rootflags=barrier=1 mem=1024M arm_freq=996
video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 640MB 256MB = 896MB total
[    0.000000] Memory: 891724k/891724k available, 156852k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     DMA     : 0xf4600000 - 0xffe00000   ( 184 MB)
[    0.000000]     vmalloc : 0xc0800000 - 0xf2000000   ( 792 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xc0000000   (1024 MB)
[    0.000000]     pkmap   : 0x7fe00000 - 0x80000000   (   2 MB)
[    0.000000]     modules : 0x7f000000 - 0x7fe00000   (  14 MB)
[    0.000000]       .init : 0x80008000 - 0x8003d000   ( 212 kB)
[    0.000000]       .text : 0x8003d000 - 0x80b7726c   (11497 kB)
[    0.000000]       .data : 0x80b78000 - 0x80bdb5c0   ( 398 kB)
[    0.000000]        .bss : 0x80bdb5e4 - 0x80c3fde0   ( 402 kB)
[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:624
[    0.000000] MXC GPIO hardware
[    0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[    0.000000] arm_max_freq=1GHz
[    0.000000] MXC_Early serial console at MMIO 0x21e8000 (options '115200')
[    0.000000] bootconsole [ttymxc1] enabled
[    0.000000] Console: colour dummy device 80x30
[    0.244820] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[    0.333147] pid_max: default: 32768 minimum: 301
[    0.338108] Mount-cache hash table entries: 512
[    0.343538] Initializing cgroup subsys cpuacct
[    0.348060] Initializing cgroup subsys memory
[    0.352465] Initializing cgroup subsys devices
[    0.356961] Initializing cgroup subsys freezer
[    0.361423] Initializing cgroup subsys blkio
[    0.365725] Initializing cgroup subsys perf_event
[    0.370527] CPU: Testing write buffer coherency: ok
[    0.375720] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.476275] CPU1: Booted secondary processor
[    0.556262] CPU2: Booted secondary processor
[    0.636273] CPU3: Booted secondary processor
[    0.675769] Brought up 4 CPUs
[    0.691600] SMP: Total of 4 processors activated (6324.22 BogoMIPS).
[    0.698704] devtmpfs: initialized
[    0.720012] print_constraints: dummy:
[    0.724072] NET: Registered protocol family 16
[    0.729757] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
[    0.737104] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
[    0.744702] print_constraints: vddsoc: 725 <--> 1300 mV at 1200 mV fast normal
[    0.752228] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[    0.759849] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[    0.767355] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[    0.775221]
[    0.775226] > UDOO quad
[    0.779025] > rev C Called set_gpios_direction
[    0.783686] Test and set gpios directions and values by Gionji feat. Ekirei test
[    0.798414] Resetting ethernet physical layer.
[    0.838068] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.844881] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[    0.852256] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.858162] L310 cache controller enabled
[    0.862193] l2x0: 16 ways, CACHE_ID 0x410000c7, AUX_CTRL 0x02070000, Cache size: 1048576 B
[    0.878016] bio: create slab <bio-0> at 0
[    0.883827] mxs-dma mxs-dma-apbh: initialized
[    0.888372] print_constraints: vmmc: 3300 mV
[    0.893081] vgaarb: loaded
[    0.896277] SCSI subsystem initialized
[    0.900495] usbcore: registered new interface driver usbfs
[    0.906064] usbcore: registered new interface driver hub
[    0.911494] usbcore: registered new device driver usb
[    0.916576] Freescale USB OTG Driver loaded, $Revision: 1.55 $
[    0.935759] imx-ipuv3 imx-ipuv3.0: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.955752] imx-ipuv3 imx-ipuv3.1: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
[    0.963528] MIPI CSI2 driver module loaded
[    0.967749] Advanced Linux Sound Architecture Driver Version 1.0.24.
[    0.974585] Bluetooth: Core ver 2.16
[    0.978229] NET: Registered protocol family 31
[    0.982688] Bluetooth: HCI device and connection manager initialized
[    0.989076] Bluetooth: HCI socket layer initialized
[    0.993971] Bluetooth: L2CAP socket layer initialized
[    0.999125] Bluetooth: SCO socket layer initialized
[    1.004339] cfg80211: Calling CRDA to update world regulatory domain
[    1.011560] i2c-core: driver [max17135] using legacy suspend method
[    1.017862] i2c-core: driver [max17135] using legacy resume method
[    1.024082] Switching to clocksource mxc_timer1
[    1.036052] NET: Registered protocol family 2
[    1.040719] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    1.048811] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.058126] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[    1.066189] TCP: Hash tables configured (established 131072 bind 65536)
[    1.072841] TCP reno registered
[    1.076005] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.081986] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.088956] NET: Registered protocol family 1
[    1.093704] RPC: Registered named UNIX socket transport module.
[    1.099666] RPC: Registered udp transport module.
[    1.104388] RPC: Registered tcp transport module.
[    1.109121] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.116369] PMU: registered new PMU device of type 0
[    1.121411] Static Power Management for Freescale i.MX6
[    1.126654] wait mode is enabled for i.MX6
[    1.130869] cpaddr = c0880000 suspend_iram_base=c08fc000
[    1.136279] PM driver module loaded
[    1.140033] IMX usb wakeup probe
[    1.143665] add wake up source irq 75
[    1.150676] IMX usb wakeup probe
[    1.154098] cpu regulator mode:ldo_enable
[    1.158370] i.MXC CPU frequency driver
[    1.180161] VFS: Disk quotas dquot_6.5.2
[    1.184408] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.193336] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.200136] JFFS2 version 2.2. (NAND) � 2001-2006 Red Hat, Inc.
[    1.206660] msgmni has been set to 1741
[    1.213271] alg: No test for stdrng (krng)
[    1.217651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.225172] io scheduler noop registered
[    1.229131] io scheduler deadline registered
[    1.233492] io scheduler cfq registered (default)
[    1.238760] MIPI DSI driver module loaded
[    1.242890] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver hdmi
[    1.249408] mxc_hdmi mxc_hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[    1.256320] fbcvt: 1920x1080@60: CVT Name - 2.073M9
[    1.261246] fb_videomode = 59 1920 1080 5780 328 128 3 32 200 5 2 0 32
[    1.274562] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    1.288753] imx-ipuv3 imx-ipuv3.0: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
[    1.322071] imx-ipuv3 imx-ipuv3.0: WARNING: adapt panel end blank lines
[    1.345731] Console: switching to colour frame buffer device 160x64
[    1.394282] mxc_sdc_fb mxc_sdc_fb.1: register mxc display driver ldb
[    1.400710] _regulator_get: get() with no identifier
[    1.412268] mxc_sdc_fb mxc_sdc_fb.2: register mxc display driver ldb
[    1.423162] imx-sdma imx-sdma: loaded firmware 1.1
[    1.429718] imx-sdma imx-sdma: initialized
[    1.521199] Serial: IMX driver
[    1.524366] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[    1.531178] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[    1.537660] console [ttymxc1] enabled, bootconsole disabled
[    1.537660] console [ttymxc1] enabled, bootconsole disabled
[    1.549131] imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
[    1.559336] loop: module loaded
[    1.562485] request BOSSA_CLK IRQ
[    1.565802] registering IRQ 419 for BOSSAC Arduino erase/reset operation
[    1.573126] Loading iSCSI transport class v2.0-870.
[    1.578235] iscsi: registered transport (tcp)
[    1.625383] No sata disk.
[    1.628511] GPMI NAND driver registered. (IMX)
[    1.633345] vcan: Virtual CAN interface driver
[    1.637795] CAN device driver interface
[    1.641651] flexcan netdevice driver
[    1.645311] FEC Ethernet Driver
[    1.650897] fec_enet_mii_bus: probed
[    1.655330] usbcore: registered new interface driver rt2800usb
[    1.661241] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.667906] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[    1.674564] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[    1.708703] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[    1.728696] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[    1.734801] hub 1-0:1.0: USB hub found
[    1.738564] hub 1-0:1.0: 1 port detected
[    1.742694] add wake up source irq 72
[    1.746400] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[    1.753047] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[    1.798699] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[    1.828691] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[    1.834709] hub 2-0:1.0: USB hub found
[    1.838471] hub 2-0:1.0: 1 port detected
[    1.842602] Initializing USB Mass Storage driver...
[    1.847553] usbcore: registered new interface driver usb-storage
[    1.853615] USB Mass Storage support registered.
[    1.858347] usbcore: registered new interface driver libusual
[    1.864205] usbcore: registered new interface driver usbserial
[    1.870086] USB Serial support registered for generic
[    1.875178] usbcore: registered new interface driver usbserial_generic
[    1.881723] usbserial: USB Serial Driver core
[    1.886124] USB Serial support registered for debug
[    1.891062] usbcore: registered new interface driver debug
[    1.896551] ARC USBOTG Device Controller driver (1 August 2005)
[    1.903063] mousedev: PS/2 mouse device common for all mice
[    1.909082] i2c-core: driver [isl29023] using legacy suspend method
[    1.915353] i2c-core: driver [isl29023] using legacy resume method
[    1.922140] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
[    1.928755] i2c /dev entries driver
[    1.932708] Linux media interface: v0.10
[    1.936676] Linux video capture interface: v2.00
[    1.941548] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[    1.949162] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[    1.956706] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video18
[    1.964270] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video19
[    1.971838] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video20
[    1.979508] vivi-000: V4L2 device registered as video0
[    1.984651] Video Technology Magazine Virtual Video Capture Board ver 0.8.0 successfully loaded.
[    1.993603] i2c-core: driver [mag3110] using legacy suspend method
[    1.999803] i2c-core: driver [mag3110] using legacy resume method
[    2.006162] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[    2.014216] Bluetooth: Virtual HCI driver ver 1.3
[    2.019076] Bluetooth: HCI UART driver ver 2.2
[    2.023523] Bluetooth: HCI H4 protocol initialized
[    2.028317] Bluetooth: HCI BCSP protocol initialized
[    2.033299] Bluetooth: HCILL protocol initialized
[    2.038005] Bluetooth: HCIATH3K protocol initialized
[    2.042984] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    2.048614] usbcore: registered new interface driver btusb
[    2.054414] sdhci: Secure Digital Host Controller Interface driver
[    2.060643] sdhci: Copyright(c) Pierre Ossman
[    2.065321] mmc0: SDHCI controller on platform [sdhci-esdhc-imx.2] using DMA
[    2.072520] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[    2.084407] VPU initialized
[    2.087997] mxc_asrc registered
[    2.124752] Thermal calibration data is 0x57c4e969
[    2.129604] Thermal sensor with ratio = 181
[    2.148691] Anatop Thermal registered as thermal_zone0
[    2.153919] anatop_thermal_probe: default cooling device is cpufreq!
[    2.160737] usbcore: registered new interface driver usbhid
[    2.166344] usbhid: USB HID core driver
[    2.170539] usbcore: registered new interface driver snd-usb-audio
[    2.179824] usb 2-1: new high speed USB device number 2 using fsl-ehci
[    2.180133] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[    2.180227] Cirrus Logic CS42888 ALSA SoC Codec Driver
[    2.180261] i2c-core: driver [cs42888] using legacy suspend method
[    2.180269] i2c-core: driver [cs42888] using legacy resume method
[    2.211739] mmc0: new high speed SDHC card at address 0007
[    2.228710] mmcblk0: mmc0:0007 SD32G 29.3 GiB
[    2.234752]  mmcblk0: p1
[    2.306426] audio_codec_ac97_cold_reset
[    2.360016] hub 2-1:1.0: USB hub found
[    2.363907] hub 2-1:1.0: 4 ports detected
[    2.391940] Found Audio codec AC97 vt1613, [ID = 5649 - 4123]
[    2.409511] asoc: vt1613 <-> imx-ssi.0 mapping ok
[    2.415142] imx_3stack asoc driver
[    2.419815] asoc: mxc-hdmi-soc <-> imx-hdmi-soc-dai.0 mapping ok
[    2.426227] ALSA device list:
[    2.429220]   #0: vt1613-audio
[    2.432276]   #1: imx-hdmi-soc
[    2.435540] NET: Registered protocol family 26
[    2.440786] TCP cubic registered
[    2.444020] NET: Registered protocol family 17
[    2.448491] can: controller area network core (rev 20090105 abi 8)
[    2.454766] NET: Registered protocol family 29
[    2.459229] can: raw protocol (rev 20090105)
[    2.463504] can: broadcast manager protocol (rev 20090105 t)
[    2.469311] Bluetooth: RFCOMM TTY layer initialized
[    2.474246] Bluetooth: RFCOMM socket layer initialized
[    2.479437] Bluetooth: RFCOMM ver 1.11
[    2.483222] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.488568] Bluetooth: BNEP filters: protocol multicast
[    2.493837] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.499848] lib80211: common routines for IEEE802.11 drivers
[    2.505543] Registering the dns_resolver key type
[    2.510323] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    2.518015] Registering SWP/SWPB emulation handler
[    2.523107] Bus freq driver module loaded
[    2.527122] Bus freq driver Enabled
[    2.533048] mxc_dvfs_core_probe
[    2.536294] DVFS driver module loaded
[    2.541118] snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:01 UTC (1)
[    2.550534] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[    2.609595] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[    2.668860] usb 2-1.3: new high speed USB device number 3 using fsl-ehci
[    2.683306] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: barrier=1
[    2.691707] VFS: Mounted root (ext4 filesystem) on device 179:1.
[    2.701067] devtmpfs: mounted
[    2.704095] Freeing init memory: 212K

Welcome to Arch Linux ARM!

         Expecting device dev-ttymxc1.device...
         Expecting device sys-subsystem-net-devices-eth0.device...
[  OK  ] Reached target Remote File Systems.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on Delayed Shutdown Socket.
[  OK  ] Listening on LVM2 metadata daemon socket.
[  OK  ] Created slice Root Slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Created slice System Slice.
[  OK  ] Created slice system-netctl\x2difplugd.slice.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Encrypted Volumes.
[  OK  ] Reached target Paths.
[  OK  ] Set up automount Arbitrary Executable File Formats F...utomount Point.
[  OK  ] Listening on Journal Socket.
         Starting Setup Virtual Console...
         Mounting Debug File System...
         Mounting POSIX Message Queue File System...
         Starting Journal Service...
[  OK  ] Started Journal Service.
         Starting Apply Kernel Variables...
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
         Starting Create list of required static device nodes...rrent kernel...
[  OK  ] Reached target Swap.
         Starting Remount Root and Kernel File Systems...
         Mounting Temporary Directory...
[  OK  ] Started Setup Virtual Console.
[  OK  ] Mounted Debug File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Remount Root and Kernel File Systems.
[  OK  ] Mounted Temporary Directory.
         Starting Load/Save Random Seed...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Create list of required static device nodes ...current kernel.
         Starting Create static device nodes in /dev...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Started Create static device nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Recreate Volatile Files and Directories...
         Starting Trigger Flushing of Journal to Persistent Storage...
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Found device /dev/ttymxc1.
[  OK  ] Found device /sys/subsystem/net/devices/eth0.
[  OK  ] Reached target Sound Card.
[  OK  ] Started Recreate Volatile Files and Directories.
         Starting Update UTMP about System Reboot/Shutdown...
[  OK  ] Started Trigger Flushing of Journal to Persistent Storage.
[  OK  ] Started Update UTMP about System Reboot/Shutdown.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Timers.
[  OK  ] Reached target Basic System.
         Starting SSH Key Generation...
         Starting Entropy Harvesting Daemon...
         Starting Automatic wired network connection using netctl profiles...
[  OK  ] Started Automatic wired network connection using netctl profiles.
         Starting Login Service...
         Starting D-Bus System Message Bus...
[  OK  ] Started D-Bus System Message Bus.
         Starting Permit User Sessions...
[  OK  ] Started Entropy Harvesting Daemon.
[  OK  ] Started Login Service.
[  OK  ] Started Permit User Sessions.
         Starting Getty on tty1...
[  OK  ] Started Getty on tty1.
         Starting Serial Getty on ttymxc1...
[  OK  ] Started Serial Getty on ttymxc1.
[  OK  ] Reached target Login Prompts.
[  OK  ] Started SSH Key Generation.
         Starting OpenSSH Daemon...
[  OK  ] Started OpenSSH Daemon.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.

Arch Linux 3.0.35-4-ARCH (ttymxc1)

alarm login: root
Password:

lscpu

Architecture:          armv7l
Byte Order:            Little Endian
CPU(s):                4
On-line CPU(s) list:   0-3
Thread(s) per core:    1
Core(s) per socket:    4
Socket(s):             1
Model name:            ARMv7 Processor rev 10 (v7l)
CPU max MHz:           996.0000
CPU min MHz:           396.0000

meminfo

[root@alarm ~]# cat /proc/meminfo
MemTotal:         891936 kB
MemFree:          831884 kB
Buffers:            3804 kB
Cached:            21288 kB
SwapCached:            0 kB
Active:            12088 kB
Inactive:          20084 kB
Active(anon):       8240 kB
Inactive(anon):      124 kB
Active(file):       3848 kB
Inactive(file):    19960 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:         891936 kB
LowFree:          831884 kB
SwapTotal:             0 kB
SwapFree:              0 kB
Dirty:                40 kB
Writeback:             0 kB
AnonPages:          7140 kB
Mapped:             9248 kB
Shmem:              1264 kB
Slab:              12480 kB
SReclaimable:       4716 kB
SUnreclaim:         7764 kB
KernelStack:         648 kB
PageTables:          388 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:      445968 kB
Committed_AS:      13380 kB
VmallocTotal:     811008 kB
VmallocUsed:        2468 kB
VmallocChunk:     807552 kB