Skip to content

Instantly share code, notes, and snippets.

@pklaus

pklaus/dmesg.4.7.6-1-ARCH.txt

Created November 2, 2016 17:16
Show Gist options
  • Star 1 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save pklaus/fa7e065e5e72bbeadbfe3124c5a5d6ba to your computer and use it in GitHub Desktop.
Save pklaus/fa7e065e5e72bbeadbfe3124c5a5d6ba to your computer and use it in GitHub Desktop.
Download ZIP
USB Problems with Udoo Quad on Kernel 4.8.x
Raw
dmesg.4.7.6-1-ARCH.txt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.7.6-1-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP Sat Oct 1 22:55:29 MDT 2016
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: Udoo i.MX6 Quad Board
[ 0.000000] cma: Reserved 24 MiB at 0x4e800000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c11dd000, node_mem_map ef6f8000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 14 pages/cpu @ef695000 s24652 r8192 d24500 u57344
[ 0.000000] pcpu-alloc: s24652 r8192 d24500 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 rootwait rw video=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 995320K/1048576K available (10510K kernel code, 895K rwdata, 4456K rodata, 1024K init, 901K bss, 28680K reserved, 24576K cma-reserved, 237568K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0f9da5c (15959 kB)
.init : 0xc1000000 - 0xc1100000 (1024 kB)
.data : 0xc1100000 - 0xc11dfcd8 ( 896 kB)
.bss : 0xc11e1000 - 0xc12c27f8 ( 902 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 erratum 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 1 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000022] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.002754] Console: colour dummy device 80x30
[ 0.002784] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000)
[ 0.002799] pid_max: default: 32768 minimum: 301
[ 0.002893] Security Framework initialized
[ 0.003042] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003057] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003710] CPU: Testing write buffer coherency: ok
[ 0.004042] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004100] Setting up static identity map for 0x10100000 - 0x10100098
[ 0.008743] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009467] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010176] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.010260] Brought up 4 CPUs
[ 0.010282] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[ 0.010289] CPU: All CPU(s) started in SVC mode.
[ 0.011249] devtmpfs: initialized
[ 0.025356] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.026093] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.027584] xor: measuring software checksum speed
[ 0.074392] arm4regs : 1233.600 MB/sec
[ 0.124391] 8regs : 950.400 MB/sec
[ 0.174391] 32regs : 1027.200 MB/sec
[ 0.224393] neon : 898.400 MB/sec
[ 0.224402] xor: using function: arm4regs (1233.600 MB/sec)
[ 0.224490] pinctrl core: initialized pinctrl subsystem
[ 0.225894] NET: Registered protocol family 16
[ 0.228201] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.244408] cpuidle: using governor ladder
[ 0.259402] cpuidle: using governor menu
[ 0.259857] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.280540] No ATAGs?
[ 0.280572] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.280583] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.282709] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.283848] Serial: AMBA PL011 UART driver
[ 0.394626] raid6: int32x1 gen() 106 MB/s
[ 0.479556] raid6: int32x1 xor() 151 MB/s
[ 0.564753] raid6: int32x2 gen() 165 MB/s
[ 0.649495] raid6: int32x2 xor() 170 MB/s
[ 0.734468] raid6: int32x4 gen() 192 MB/s
[ 0.819533] raid6: int32x4 xor() 165 MB/s
[ 0.904543] raid6: int32x8 gen() 215 MB/s
[ 0.989394] raid6: int32x8 xor() 153 MB/s
[ 1.074404] raid6: neonx1 gen() 614 MB/s
[ 1.159399] raid6: neonx1 xor() 454 MB/s
[ 1.244401] raid6: neonx2 gen() 657 MB/s
[ 1.329399] raid6: neonx2 xor() 571 MB/s
[ 1.414481] raid6: neonx4 gen() 658 MB/s
[ 1.499446] raid6: neonx4 xor() 521 MB/s
[ 1.584466] raid6: neonx8 gen() 493 MB/s
[ 1.669422] raid6: neonx8 xor() 445 MB/s
[ 1.669430] raid6: using algorithm neonx4 gen() 658 MB/s
[ 1.669436] raid6: .... xor() 521 MB/s, rmw enabled
[ 1.669442] raid6: using intx1 recovery algorithm
[ 1.672642] mxs-dma 110000.dma-apbh: initialized
[ 1.678306] vgaarb: loaded
[ 1.678985] SCSI subsystem initialized
[ 1.679184] libata version 3.00 loaded.
[ 1.679453] usbcore: registered new interface driver usbfs
[ 1.679517] usbcore: registered new interface driver hub
[ 1.679601] usbcore: registered new device driver usb
[ 1.681010] i2c i2c-1: IMX I2C adapter registered
[ 1.681028] i2c i2c-1: can't use DMA, using PIO instead.
[ 1.681580] i2c i2c-2: IMX I2C adapter registered
[ 1.681597] i2c i2c-2: can't use DMA, using PIO instead.
[ 1.682471] media: Linux media interface: v0.10
[ 1.682518] Linux video capture interface: v2.00
[ 1.682591] pps_core: LinuxPPS API ver. 1 registered
[ 1.682598] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.682619] PTP clock support registered
[ 1.682655] EDAC MC: Ver: 3.0.0
[ 1.683688] Advanced Linux Sound Architecture Driver Initialized.
[ 1.684253] NetLabel: Initializing
[ 1.684264] NetLabel: domain hash size = 128
[ 1.684269] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.684330] NetLabel: unlabeled traffic allowed by default
[ 1.684714] clocksource: Switched to clocksource mxc_timer1
[ 1.684851] VFS: Disk quotas dquot_6.6.0
[ 1.684911] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.695808] NET: Registered protocol family 2
[ 1.696443] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.696523] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.696647] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.696729] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.696779] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.696983] NET: Registered protocol family 1
[ 1.697326] RPC: Registered named UNIX socket transport module.
[ 1.697337] RPC: Registered udp transport module.
[ 1.697343] RPC: Registered tcp transport module.
[ 1.697349] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.697361] PCI: CLS 0 bytes, default 64
[ 1.698130] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.700170] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.701033] workingset: timestamp_bits=12 max_order=18 bucket_order=6
[ 1.707257] zbud: loaded
[ 1.709466] NFS: Registering the id_resolver key type
[ 1.709509] Key type id_resolver registered
[ 1.709517] Key type id_legacy registered
[ 1.709534] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.715822] Key type asymmetric registered
[ 1.715887] bounce: pool size: 64 pages
[ 1.716065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.716192] io scheduler noop registered
[ 1.716204] io scheduler deadline registered
[ 1.716253] io scheduler cfq registered (default)
[ 1.728028] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 1.728047] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 1.734685] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.737376] Serial: AMBA driver
[ 1.738136] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 288, base_baud = 5000000) is a IMX
[ 2.558650] console [ttymxc1] enabled
[ 2.562931] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 289, base_baud = 5000000) is a IMX
[ 2.572842] [drm] Initialized drm 1.1.0 20060810
[ 2.585918] loop: module loaded
[ 2.590838] Loading iSCSI transport class v2.0-870.
[ 2.596132] iscsi: registered transport (tcp)
[ 2.601472] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
[ 2.609428] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
[ 2.617453] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
[ 2.625651] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[ 2.636153] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 2.643173] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.651988] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 2.662329] scsi host0: ahci-imx
[ 2.665918] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 292
[ 2.678597] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_16 already requested by 20e0000.iomuxc; cannot claim for 2188000.ethernet
[ 2.690646] imx6q-pinctrl 20e0000.iomuxc: pin-146 (2188000.ethernet) status -22
[ 2.697983] imx6q-pinctrl 20e0000.iomuxc: could not request pin 146 (MX6Q_PAD_GPIO_16) from group enetgrp on device 20e0000.iomuxc
[ 2.709831] fec 2188000.ethernet: Error applying setting, reverse things back
[ 2.717108] 2188000.ethernet supply phy not found, using dummy regulator
[ 2.724308] pps pps0: new PPS source ptp0
[ 2.733082] libphy: fec_enet_mii_bus: probed
[ 2.737949] fec 2188000.ethernet eth0: registered PHC device 0
[ 2.746975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.753530] ehci-pci: EHCI PCI platform driver
[ 2.758035] ehci-platform: EHCI generic platform driver
[ 2.763499] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 2.768916] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.774297] ehci-orion: EHCI orion driver
[ 2.778462] ehci-exynos: EHCI EXYNOS driver
[ 2.782825] tegra-ehci: Tegra EHCI driver
[ 2.787017] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.793230] ohci-pci: OHCI PCI platform driver
[ 2.797757] ohci-platform: OHCI generic platform driver
[ 2.803179] ohci-exynos: OHCI EXYNOS driver
[ 2.807554] ohci-omap3: OHCI OMAP3 driver
[ 2.812139] usbcore: registered new interface driver uas
[ 2.817538] usbcore: registered new interface driver usb-storage
[ 2.823599] usbcore: registered new interface driver ums-cypress
[ 2.829657] usbcore: registered new interface driver ums_eneub6250
[ 2.835890] usbcore: registered new interface driver ums-freecom
[ 2.841999] usbcore: registered new interface driver ums-isd200
[ 2.847981] usbcore: registered new interface driver ums-usbat
[ 2.856367] 2184200.usb supply vbus not found, using dummy regulator
[ 2.866665] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.871601] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.884747] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.890359] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.897179] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.904419] usb usb1: Product: EHCI Host Controller
[ 2.909313] usb usb1: Manufacturer: Linux 4.7.6-1-ARCH ehci_hcd
[ 2.915248] usb usb1: SerialNumber: ci_hdrc.0
[ 2.920288] hub 1-0:1.0: USB hub found
[ 2.924496] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_17 already requested by 20e0000.iomuxc; cannot claim for 2184200.usb:usb2415@01
[ 2.937049] imx6q-pinctrl 20e0000.iomuxc: pin-147 (2184200.usb:usb2415@01) status -22
[ 2.944901] imx6q-pinctrl 20e0000.iomuxc: could not request pin 147 (MX6Q_PAD_GPIO_17) from group usbhgrp on device 20e0000.iomuxc
[ 2.956744] usb_generic_onboard 2184200.usb:usb2415@01: Error applying setting, reverse things back
[ 2.965947] hub 1-0:1.0: 1 port detected
[ 2.973834] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
[ 2.983255] i2c /dev entries driver
[ 2.996894] watchdog: Invalid min and max timeout values, resetting to 0!
[ 3.003796] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2
[ 3.012338] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2
[ 3.012655] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=1)
[ 3.015439] sdhci: Secure Digital Host Controller Interface driver
[ 3.015441] sdhci: Copyright(c) Pierre Ossman
[ 3.016528] Synopsys Designware Multimedia Card Interface Driver
[ 3.017746] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 3.017747] usbcore: registered new interface driver vub300
[ 3.017794] usbcore: registered new interface driver ushc
[ 3.018161] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.018830] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[ 3.054752] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[ 3.056498] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.056728] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.057020] usbcore: registered new interface driver usbhid
[ 3.057022] usbhid: USB HID core driver
[ 3.057279] ashmem: initialized
[ 3.065078] NET: Registered protocol family 10
[ 3.068160] mip6: Mobile IPv6
[ 3.068169] NET: Registered protocol family 17
[ 3.068252] Key type dns_resolver registered
[ 3.087361] ThumbEE CPU extension supported.
[ 3.087371] Registering SWP/SWPB emulation handler
[ 3.087969] registered taskstats version 1
[ 3.088034] zswap: loaded using pool lzo/zbud
[ 3.090039] Btrfs loaded, crc32c=crc32c-generic
[ 3.090044] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 3.090046] BTRFS: selftest: sectorsize: 4096 nodesize: 8192
[ 3.090050] BTRFS: selftest: sectorsize: 4096 nodesize: 16384
[ 3.090053] BTRFS: selftest: sectorsize: 4096 nodesize: 32768
[ 3.090055] BTRFS: selftest: sectorsize: 4096 nodesize: 65536
[ 3.091122] Key type encrypted registered
[ 3.092486] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[ 3.093334] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 2016-10-31 20:34:00 UTC (1477946040)
[ 3.093341] sr_init: No PMIC hook to init smartreflex
[ 3.093451] sr_init: platform driver register failed for SR
[ 3.102054] PM: Hibernation image not present or could not be loaded.
[ 3.102070] lcd_panel: disabling
[ 3.102262] ALSA device list:
[ 3.102265] No soundcards found.
[ 3.144753] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.238683] coda 2040000.vpu: firmware request failed
[ 3.249508] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.263433] mmc0: new high speed SDHC card at address 0001
[ 3.269547] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 3.275049] mmcblk0: p1
[ 3.444745] usb 1-1: new high-speed USB device number 2 using ci_hdrc
[ 3.466572] ata1.00: ATA-8: ST9640320AS, 0001SDM1, max UDMA/133
[ 3.472519] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.522820] ata1.00: configured for UDMA/133
[ 3.527597] scsi 0:0:0:0: Direct-Access ATA ST9640320AS SDM1 PQ: 0 ANSI: 5
[ 3.570322] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 3.570379] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.580271] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 3.580278] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.580643] imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_17 already requested by 20e0000.iomuxc; cannot claim for 1-1
[ 3.580651] imx6q-pinctrl 20e0000.iomuxc: pin-147 (1-1) status -22
[ 3.580657] imx6q-pinctrl 20e0000.iomuxc: could not request pin 147 (MX6Q_PAD_GPIO_17) from group usbhgrp on device 20e0000.iomuxc
[ 3.580663] usb 1-1: Error applying setting, reverse things back
[ 3.581036] hub 1-1:1.0: USB hub found
[ 3.581130] hub 1-1:1.0: 4 ports detected
[ 3.639996] sd 0:0:0:0: [sda] Write Protect is off
[ 3.644818] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.644905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.718317] sda: sda1
[ 3.721630] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.734468] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 3.743087] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 3.763138] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.771290] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.779487] devtmpfs: mounted
[ 3.783380] Freeing unused kernel memory: 1024K (c1000000 - c1100000)
[ 3.864753] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
[ 3.975266] usb 1-1.1: New USB device found, idVendor=0409, idProduct=005a
[ 3.982191] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.990528] hub 1-1.1:1.0: USB hub found
[ 3.995004] hub 1-1.1:1.0: 4 ports detected
[ 4.084802] usb 1-1.2: new full-speed USB device number 4 using ci_hdrc
[ 4.198009] usb 1-1.2: New USB device found, idVendor=2341, idProduct=0043
[ 4.204942] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=220
[ 4.212461] usb 1-1.2: Manufacturer: Arduino (www.arduino.cc)
[ 4.218225] usb 1-1.2: SerialNumber: 74137363737351907291
[ 4.309755] usb 1-1.1.1: new full-speed USB device number 5 using ci_hdrc
[ 4.426012] usb 1-1.1.1: New USB device found, idVendor=0403, idProduct=6001
[ 4.433114] usb 1-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.440641] usb 1-1.1.1: Product: FT232R USB UART
[ 4.445365] usb 1-1.1.1: Manufacturer: FTDI
[ 4.449561] usb 1-1.1.1: SerialNumber: AH01LZXP
[ 4.494556] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.504759] usb 1-1.3: new high-speed USB device number 6 using ci_hdrc
[ 4.520118] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available)
[ 4.534503] random: systemd: uninitialized urandom read (16 bytes read, 27 bits of entropy available)
[ 4.561180] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.579605] systemd[1]: Detected architecture arm.
[ 4.610653] systemd[1]: Set hostname to <udoo>.
[ 4.623148] usb 1-1.3: New USB device found, idVendor=148f, idProduct=5370
[ 4.630087] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.637434] usb 1-1.3: Product: 802.11 n WLAN
[ 4.641813] usb 1-1.3: Manufacturer: Ralink
[ 4.646003] usb 1-1.3: SerialNumber: 1.0
[ 4.704973] usb 1-1.1.2: new full-speed USB device number 7 using ci_hdrc
[ 4.713932] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[ 4.722340] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[ 4.722582] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 29 bits of entropy available)
[ 4.817663] usb 1-1.1.2: New USB device found, idVendor=03eb, idProduct=204b
[ 4.824773] usb 1-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.832309] usb 1-1.1.2: Product: CUL868
[ 4.836257] usb 1-1.1.2: Manufacturer: busware.de
[ 4.894788] usb 1-1.4: new full-speed USB device number 8 using ci_hdrc
[ 4.906500] random: systemd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
[ 4.915947] random: systemd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
[ 4.925516] random: systemd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
[ 4.935370] random: systemd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
[ 4.950030] random: systemd: uninitialized urandom read (16 bytes read, 33 bits of entropy available)
[ 5.006138] usb 1-1.4: New USB device found, idVendor=1a86, idProduct=7523
[ 5.013072] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 5.020435] usb 1-1.4: Product: USB2.0-Serial
[ 5.079760] usb 1-1.1.3: new full-speed USB device number 9 using ci_hdrc
[ 5.192007] usb 1-1.1.3: New USB device found, idVendor=03eb, idProduct=204b
[ 5.199115] usb 1-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.206640] usb 1-1.1.3: Product: CUL433
[ 5.210600] usb 1-1.1.3: Manufacturer: busware.de
[ 5.252191] systemd[1]: Listening on Journal Socket.
[ 5.269900] systemd[1]: Reached target Swap.
[ 5.284960] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.299745] usb 1-1.1.4: new full-speed USB device number 10 using ci_hdrc
[ 5.306903] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.325088] systemd[1]: Listening on Network Service Netlink Socket.
[ 5.344862] systemd[1]: Reached target Encrypted Volumes.
[ 5.361621] systemd[1]: Created slice System Slice.
[ 5.390308] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.408577] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.419632] usb 1-1.1.4: New USB device found, idVendor=2341, idProduct=8036
[ 5.428285] usb 1-1.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.435804] usb 1-1.1.4: Product: Arduino Leonardo
[ 5.440616] usb 1-1.1.4: Manufacturer: Arduino LLC
[ 5.449999] input: Arduino LLC Arduino Leonardo as /devices/soc0/soc/2100000.aips-bus/2184200.usb/ci_hdrc.0/usb1/1-1/1-1.1/1-1.1.4/1-1.1.4:1.2/0003:2341:8036.0001/input/input0
[ 5.466690] systemd[1]: Created slice system-getty.slice.
[ 5.505249] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 5.526991] hid-generic 0003:2341:8036.0001: input,hidraw0: USB HID v1.01 Mouse [Arduino LLC Arduino Leonardo] on usb-ci_hdrc.0-1.1.4/input2
[ 5.528372] systemd[1]: Starting Setup Virtual Console...
[ 5.560723] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.625073] systemd[1]: Mounting Temporary Directory...
[ 5.645731] systemd[1]: Created slice User and Session Slice.
[ 5.669606] systemd[1]: Listening on Process Core Dump Socket.
[ 5.690178] systemd[1]: Listening on udev Kernel Socket.
[ 5.710048] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.750007] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.764953] systemd[1]: Reached target Remote File Systems.
[ 5.785111] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 5.805536] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.829874] systemd[1]: Reached target Slices.
[ 5.845024] systemd[1]: Listening on udev Control Socket.
[ 5.874937] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.894861] systemd[1]: Reached target Paths.
[ 5.925001] systemd[1]: Mounting Debug File System...
[ 5.952610] systemd[1]: Starting Apply Kernel Variables...
[ 5.973684] systemd[1]: Mounting Configuration File System...
[ 5.990112] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.030300] systemd[1]: Starting Journal Service...
[ 6.053031] systemd[1]: Mounted Configuration File System.
[ 6.070186] systemd[1]: Mounted Debug File System.
[ 6.084945] systemd[1]: Mounted POSIX Message Queue File System.
[ 6.100003] systemd[1]: Mounted Temporary Directory.
[ 6.116136] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 6.141040] systemd[1]: Started Remount Root and Kernel File Systems.
[ 6.161058] systemd[1]: Started Setup Virtual Console.
[ 6.182809] systemd[1]: Started Apply Kernel Variables.
[ 6.260257] systemd[1]: Starting udev Coldplug all Devices...
[ 6.283117] systemd[1]: Starting Load/Save Random Seed...
[ 6.303241] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 6.344103] systemd[1]: Started Load/Save Random Seed.
[ 6.594158] systemd[1]: Started Create Static Device Nodes in /dev.
[ 6.616196] systemd[1]: Reached target Local File Systems (Pre).
[ 6.652433] systemd[1]: Starting udev Kernel Device Manager...
[ 6.741434] systemd[1]: Started udev Coldplug all Devices.
[ 7.053798] systemd[1]: Started udev Kernel Device Manager.
[ 7.545193] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 7.554770] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 7.598185] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops [etnaviv])
[ 7.632440] etnaviv gpu-subsystem: bound 130000.gpu (ops gpu_ops [etnaviv])
[ 7.654106] etnaviv gpu-subsystem: bound 2204000.gpu (ops gpu_ops [etnaviv])
[ 7.675048] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 7.730885] caam 2100000.caam: Entropy delay = 3200
[ 7.731081] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 7.746345] systemd[1]: Found device /dev/ttymxc1.
[ 7.765474] fsl-asrc 2034000.asrc: driver registered
[ 7.801301] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 7.802805] caam 2100000.caam: Instantiated RNG4 SH0
[ 7.812484] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 7.818845] etnaviv-gpu 2204000.gpu: hw init failed: -6
[ 7.846133] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 7.863582] caam 2100000.caam: Instantiated RNG4 SH1
[ 7.868785] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 7.875301] caam 2100000.caam: job rings = 2, qi = 0
[ 7.886039] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.892919] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.000273] systemd[1]: Started Journal Service.
[ 8.015386] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 8.027587] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.034501] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.046192] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.051537] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 8.051541] [drm] No driver support for vblank timestamp query.
[ 8.052208] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 8.052500] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 8.054878] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 8.055841] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 8.055974] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 8.058107] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx])
[ 8.058284] imx-drm display-subsystem: No connectors reported connected with modes
[ 8.058293] [drm] Cannot find any crtc or sizes - going 1024x768
[ 8.103913] cdc_acm 1-1.1.2:1.0: ttyACM1: USB ACM device
[ 8.109046] cdc_acm 1-1.1.3:1.0: ttyACM2: USB ACM device
[ 8.121087] cdc_acm 1-1.1.4:1.0: ttyACM3: USB ACM device
[ 8.128815] usbcore: registered new interface driver cdc_acm
[ 8.128818] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 8.160713] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.162054] mousedev: PS/2 mouse device common for all mice
[ 8.162120] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.162127] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.188077] usbcore: registered new interface driver usbserial
[ 8.188157] usbcore: registered new interface driver usbserial_generic
[ 8.188213] usbserial: USB Serial support registered for generic
[ 8.192085] usbcore: registered new interface driver ch341
[ 8.192146] usbserial: USB Serial support registered for ch341-uart
[ 8.192213] ch341 1-1.4:1.0: ch341-uart converter detected
[ 8.194462] usb 1-1.4: ch341-uart converter now attached to ttyUSB0
[ 8.195823] Console: switching to colour frame buffer device 128x48
[ 8.196028] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.196037] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.197325] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.197332] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.208305] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.208313] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.243241] usbcore: registered new interface driver ftdi_sio
[ 8.243301] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 8.243506] ftdi_sio 1-1.1.1:1.0: FTDI USB Serial Device converter detected
[ 8.243636] usb 1-1.1.1: Detected FT232RL
[ 8.252343] usb 1-1.1.1: FTDI USB Serial Device converter now attached to ttyUSB1
[ 8.254055] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.254062] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.255531] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.255540] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 8.354009] BTRFS: device label udoo-hdd devid 1 transid 107960 /dev/sda1
[ 8.381158] imx-drm display-subsystem: fb0: frame buffer device
[ 8.393986] systemd-journald[166]: Received request to flush runtime journal from PID 1
[ 8.409800] [drm] Initialized imx-drm 1.0.0 20120507 on minor 1
[ 8.420413] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 8.427312] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 9.617753] random: nonblocking pool is initialized
[ 9.764780] usb 1-1.3: reset high-speed USB device number 6 using ci_hdrc
[ 9.885890] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected
[ 9.922381] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected
[ 9.955946] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.965993] usbcore: registered new interface driver rt2800usb
[ 9.966811] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 9.966818] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 10.079256] BTRFS info (device sda1): enabling auto defrag
[ 10.084838] BTRFS info (device sda1): disk space caching is enabled
[ 12.424211] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.448347] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.770836] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 12.777863] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 12.830665] Generic PHY 2188000.ethernet:06: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:06, irq=-1)
[ 12.850239] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.830208] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 19.837918] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Raw
dmesg.4.8.5-1-ARCH.txt
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.8.5-1-ARCH (builduser@leming) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP Fri Oct 28 19:48:29 MDT 2016
[ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt:Machine model: Udoo i.MX6 Quad Board
[ 0.000000] cma: Reserved 48 MiB at 0x4d000000
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c11df340, node_mem_map ef6f8000
[ 0.000000] Normal zone: 1728 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
[ 0.000000] percpu: Embedded 14 pages/cpu @ef695000 s27532 r8192 d21620 u57344
[ 0.000000] pcpu-alloc: s27532 r8192 d21620 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
[ 0.000000] Kernel command line: console=ttymxc1,115200 root=/dev/mmcblk0p1 rootwait rw video=
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 970800K/1048576K available (10240K kernel code, 903K rwdata, 4488K rodata, 1024K init, 837K bss, 28624K reserved, 49152K cma-reserved, 212992K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0b00000 (11232 kB)
.init : 0xc1000000 - 0xc1100000 (1024 kB)
.data : 0xc1100000 - 0xc11e1fe0 ( 904 kB)
.bss : 0xc11e3000 - 0xc12b4578 ( 838 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 32.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=4
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] L2C-310 errata 752271 769419 enabled
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
[ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
[ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
[ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
[ 0.000000] Switching to timer-based delay loop, resolution 333ns
[ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
[ 0.000024] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[ 0.002679] Console: colour dummy device 80x30
[ 0.002712] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=15000)
[ 0.002724] pid_max: default: 32768 minimum: 301
[ 0.002822] Security Framework initialized
[ 0.002978] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.002990] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.003670] CPU: Testing write buffer coherency: ok
[ 0.003994] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.004049] Setting up static identity map for 0x10100000 - 0x10100098
[ 0.008697] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.009468] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.010232] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.010316] Brought up 4 CPUs
[ 0.010337] SMP: Total of 4 processors activated (24.00 BogoMIPS).
[ 0.010344] CPU: All CPU(s) started in SVC mode.
[ 0.011284] devtmpfs: initialized
[ 0.024000] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 0.024357] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302231375000 ns
[ 0.026974] xor: measuring software checksum speed
[ 0.074403] arm4regs : 1232.800 MB/sec
[ 0.124399] 8regs : 950.400 MB/sec
[ 0.174400] 32regs : 1027.200 MB/sec
[ 0.224402] neon : 900.000 MB/sec
[ 0.224412] xor: using function: arm4regs (1232.800 MB/sec)
[ 0.224582] pinctrl core: initialized pinctrl subsystem
[ 0.226319] NET: Registered protocol family 16
[ 0.228623] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.244491] cpuidle: using governor ladder
[ 0.264486] cpuidle: using governor menu
[ 0.264936] CPU identified as i.MX6Q, silicon rev 1.2
[ 0.284484] No ATAGs?
[ 0.284518] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.284527] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.286266] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
[ 0.287300] Serial: AMBA PL011 UART driver
[ 0.394666] raid6: int32x1 gen() 106 MB/s
[ 0.479446] raid6: int32x1 xor() 148 MB/s
[ 0.564763] raid6: int32x2 gen() 165 MB/s
[ 0.649526] raid6: int32x2 xor() 169 MB/s
[ 0.734438] raid6: int32x4 gen() 192 MB/s
[ 0.819506] raid6: int32x4 xor() 168 MB/s
[ 0.904514] raid6: int32x8 gen() 215 MB/s
[ 0.989446] raid6: int32x8 xor() 155 MB/s
[ 1.074433] raid6: neonx1 gen() 615 MB/s
[ 1.159469] raid6: neonx1 xor() 455 MB/s
[ 1.244453] raid6: neonx2 gen() 657 MB/s
[ 1.329405] raid6: neonx2 xor() 576 MB/s
[ 1.414395] raid6: neonx4 gen() 659 MB/s
[ 1.499441] raid6: neonx4 xor() 525 MB/s
[ 1.584397] raid6: neonx8 gen() 491 MB/s
[ 1.669416] raid6: neonx8 xor() 446 MB/s
[ 1.669425] raid6: using algorithm neonx4 gen() 659 MB/s
[ 1.669431] raid6: .... xor() 525 MB/s, rmw enabled
[ 1.669439] raid6: using intx1 recovery algorithm
[ 1.672478] mxs-dma 110000.dma-apbh: initialized
[ 1.677952] vgaarb: loaded
[ 1.678634] SCSI subsystem initialized
[ 1.678838] libata version 3.00 loaded.
[ 1.679066] usbcore: registered new interface driver usbfs
[ 1.679127] usbcore: registered new interface driver hub
[ 1.679216] usbcore: registered new device driver usb
[ 1.680366] i2c i2c-1: IMX I2C adapter registered
[ 1.680384] i2c i2c-1: can't use DMA, using PIO instead.
[ 1.680825] i2c i2c-2: IMX I2C adapter registered
[ 1.680841] i2c i2c-2: can't use DMA, using PIO instead.
[ 1.681637] media: Linux media interface: v0.10
[ 1.681686] Linux video capture interface: v2.00
[ 1.681762] pps_core: LinuxPPS API ver. 1 registered
[ 1.681771] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 1.681799] PTP clock support registered
[ 1.681834] EDAC MC: Ver: 3.0.0
[ 1.682800] Advanced Linux Sound Architecture Driver Initialized.
[ 1.683365] NetLabel: Initializing
[ 1.683375] NetLabel: domain hash size = 128
[ 1.683382] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.683435] NetLabel: unlabeled traffic allowed by default
[ 1.683786] clocksource: Switched to clocksource mxc_timer1
[ 1.683949] VFS: Disk quotas dquot_6.6.0
[ 1.684009] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.694650] NET: Registered protocol family 2
[ 1.695290] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.695369] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.695494] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.695566] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 1.695607] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 1.695876] NET: Registered protocol family 1
[ 1.696273] RPC: Registered named UNIX socket transport module.
[ 1.696283] RPC: Registered udp transport module.
[ 1.696289] RPC: Registered tcp transport module.
[ 1.696296] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.696309] PCI: CLS 0 bytes, default 64
[ 1.697060] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
[ 1.699101] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.699892] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 1.705648] zbud: loaded
[ 1.707839] NFS: Registering the id_resolver key type
[ 1.707871] Key type id_resolver registered
[ 1.707879] Key type id_legacy registered
[ 1.707896] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.714069] Key type asymmetric registered
[ 1.714132] bounce: pool size: 64 pages
[ 1.714313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 1.714454] io scheduler noop registered
[ 1.714465] io scheduler deadline registered
[ 1.714716] io scheduler cfq registered (default)
[ 1.725400] imx-sdma 20ec000.sdma: Direct firmware load for imx/sdma/sdma-imx6q.bin failed with error -2
[ 1.725420] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 1.732226] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 1.734830] Serial: AMBA driver
[ 1.735603] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 288, base_baud = 5000000) is a IMX
[ 2.557650] console [ttymxc1] enabled
[ 2.562441] [drm] Initialized drm 1.1.0 20060810
[ 2.575364] loop: module loaded
[ 2.580123] Loading iSCSI transport class v2.0-870.
[ 2.585381] iscsi: registered transport (tcp)
[ 2.590687] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
[ 2.598641] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
[ 2.606672] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
[ 2.614872] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
[ 2.625386] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
[ 2.632399] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
[ 2.641212] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
[ 2.651533] scsi host0: ahci-imx
[ 2.655105] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 291
[ 2.667462] libphy: Fixed MDIO Bus: probed
[ 2.672249] 2188000.ethernet supply phy not found, using dummy regulator
[ 2.679453] pps pps0: new PPS source ptp0
[ 2.688102] libphy: fec_enet_mii_bus: probed
[ 2.692976] fec 2188000.ethernet eth0: registered PHC device 0
[ 2.701393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.707953] ehci-pci: EHCI PCI platform driver
[ 2.712481] ehci-platform: EHCI generic platform driver
[ 2.717957] ehci-mxc: Freescale On-Chip EHCI Host driver
[ 2.723393] ehci-omap: OMAP-EHCI Host Controller driver
[ 2.728817] ehci-orion: EHCI orion driver
[ 2.732958] ehci-exynos: EHCI EXYNOS driver
[ 2.737332] tegra-ehci: Tegra EHCI driver
[ 2.741532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.747756] ohci-pci: OHCI PCI platform driver
[ 2.752273] ohci-platform: OHCI generic platform driver
[ 2.757683] ohci-exynos: OHCI EXYNOS driver
[ 2.762047] ohci-omap3: OHCI OMAP3 driver
[ 2.766609] usbcore: registered new interface driver uas
[ 2.772013] usbcore: registered new interface driver usb-storage
[ 2.778087] usbcore: registered new interface driver ums-cypress
[ 2.784155] usbcore: registered new interface driver ums_eneub6250
[ 2.790395] usbcore: registered new interface driver ums-freecom
[ 2.796460] usbcore: registered new interface driver ums-isd200
[ 2.802433] usbcore: registered new interface driver ums-usbat
[ 2.810786] 2184200.usb supply vbus not found, using dummy regulator
[ 2.821104] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 2.826036] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
[ 2.843819] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 2.849419] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.856239] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.863483] usb usb1: Product: EHCI Host Controller
[ 2.868381] usb usb1: Manufacturer: Linux 4.8.5-1-ARCH ehci_hcd
[ 2.874320] usb usb1: SerialNumber: ci_hdrc.0
[ 2.879354] hub 1-0:1.0: USB hub found
[ 2.883143] hub 1-0:1.0: 1 port detected
[ 2.890939] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
[ 2.900331] i2c /dev entries driver
[ 2.907607] coda 2040000.vpu: Direct firmware load for vpu_fw_imx6q.bin failed with error -2
[ 2.916160] coda 2040000.vpu: Direct firmware load for v4l-coda960-imx6q.bin failed with error -2
[ 2.922593] sdhci: Secure Digital Host Controller Interface driver
[ 2.922596] sdhci: Copyright(c) Pierre Ossman
[ 2.923599] Synopsys Designware Multimedia Card Interface Driver
[ 2.924747] VUB300 Driver rom wait states = 1C irqpoll timeout = 0400
[ 2.924748] usbcore: registered new interface driver vub300
[ 2.924798] usbcore: registered new interface driver ushc
[ 2.925123] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.925785] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
[ 2.973908] coda 2040000.vpu: firmware request failed
[ 2.978815] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
[ 2.988845] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.995137] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.000894] usbcore: registered new interface driver usbhid
[ 3.006500] usbhid: USB HID core driver
[ 3.010624] ashmem: initialized
[ 3.026182] NET: Registered protocol family 10
[ 3.031757] mip6: Mobile IPv6
[ 3.034762] NET: Registered protocol family 17
[ 3.039335] Key type dns_resolver registered
[ 3.046405] ThumbEE CPU extension supported.
[ 3.050757] Registering SWP/SWPB emulation handler
[ 3.056175] registered taskstats version 1
[ 3.060406] zswap: loaded using pool lzo/zbud
[ 3.064834] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.074674] Btrfs loaded, crc32c=crc32c-generic
[ 3.080229] Key type encrypted registered
[ 3.085371] mmc0: new high speed SDHC card at address 0001
[ 3.085609] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C
[ 3.090878] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 2016-10-31 20:17:48 UTC (1477945068)
[ 3.090883] sr_init: No PMIC hook to init smartreflex
[ 3.091009] sr_init: platform driver register failed for SR
[ 3.099110] PM: Hibernation image not present or could not be loaded.
[ 3.099133] lcd_panel: disabling
[ 3.099310] ALSA device list:
[ 3.099313] No soundcards found.
[ 3.133214] mmcblk0: mmc0:0001 00000 29.8 GiB
[ 3.138737] mmcblk0: p1
[ 3.141355] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.213833] usb 1-1: new full-speed USB device number 2 using ci_hdrc
[ 3.433813] usb 1-1: device descriptor read/64, error -71
[ 3.447837] ata1.00: ATA-8: ST9640320AS, 0001SDM1, max UDMA/133
[ 3.453796] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.504059] ata1.00: configured for UDMA/133
[ 3.508857] scsi 0:0:0:0: Direct-Access ATA ST9640320AS SDM1 PQ: 0 ANSI: 5
[ 3.564484] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 3.564498] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.574303] random: fast init done
[ 3.581074] sd 0:0:0:0: [sda] Write Protect is off
[ 3.585889] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.585965] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.657976] sda: sda1
[ 3.661248] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.674198] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities
[ 3.682893] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities
[ 3.712930] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.721110] VFS: Mounted root (ext4 filesystem) on device 179:1.
[ 3.729180] devtmpfs: mounted
[ 3.733057] Freeing unused kernel memory: 1024K (c1000000 - c1100000)
[ 3.763826] usb 1-1: device descriptor read/64, error -71
[ 3.998835] usb 1-1: new full-speed USB device number 3 using ci_hdrc
[ 4.218823] usb 1-1: device descriptor read/64, error -71
[ 4.374716] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.425401] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.443914] systemd[1]: Detected architecture arm.
[ 4.479774] systemd[1]: Set hostname to <udoo>.
[ 4.548923] usb 1-1: device descriptor read/64, error -71
[ 4.783836] usb 1-1: new full-speed USB device number 4 using ci_hdrc
[ 4.981766] systemd[1]: Reached target Swap.
[ 4.999103] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 5.028053] systemd[1]: Listening on Process Core Dump Socket.
[ 5.050748] systemd[1]: Created slice System Slice.
[ 5.069636] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 5.127134] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.149077] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.268856] usb 1-1: device not accepting address 4, error -71
[ 5.393856] usb 1-1: new full-speed USB device number 5 using ci_hdrc
[ 5.878992] usb 1-1: device not accepting address 5, error -71
[ 5.886970] usb usb1-port1: unable to enumerate USB device
[ 7.053991] etnaviv gpu-subsystem: bound 134000.gpu (ops gpu_ops [etnaviv])
[ 7.061232] etnaviv gpu-subsystem: bound 130000.gpu (ops gpu_ops [etnaviv])
[ 7.068920] etnaviv gpu-subsystem: bound 2204000.gpu (ops gpu_ops [etnaviv])
[ 7.076070] etnaviv-gpu 134000.gpu: model: GC320, revision: 5007
[ 7.133775] etnaviv-gpu 130000.gpu: model: GC2000, revision: 5108
[ 7.209360] etnaviv-gpu 2204000.gpu: model: GC355, revision: 1215
[ 7.215545] etnaviv-gpu 2204000.gpu: Ignoring GPU with VG and FE2.0
[ 7.226390] imx-ipuv3 2400000.ipu: IPUv3H probed
[ 7.226721] fsl-asrc 2034000.asrc: driver registered
[ 7.230216] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=1)
[ 7.247492] fsl-ssi-dai 2028000.ssi: No cache defaults, reading back from HW
[ 7.256288] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered
[ 7.261307] imx-ipuv3 2800000.ipu: IPUv3H probed
[ 7.267459] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.272136] caam 2100000.caam: Entropy delay = 3200
[ 7.282226] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered
[ 7.288661] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.332936] caam 2100000.caam: Instantiated RNG4 SH0
[ 7.393696] caam 2100000.caam: Instantiated RNG4 SH1
[ 7.398978] caam 2100000.caam: device ID = 0x0a16010000000000 (Era 4)
[ 7.405484] caam 2100000.caam: job rings = 2, qi = 0
[ 7.412177] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.419114] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.427944] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.434895] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.522075] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.523563] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 7.523567] [drm] No driver support for vblank timestamp query.
[ 7.523783] imx-drm display-subsystem: bound imx-ipuv3-crtc.2 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 7.525536] imx-drm display-subsystem: bound imx-ipuv3-crtc.3 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 7.525627] imx-drm display-subsystem: bound imx-ipuv3-crtc.6 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 7.525686] imx-drm display-subsystem: bound imx-ipuv3-crtc.7 (ops ipu_crtc_ops [imx_ipuv3_crtc])
[ 7.525807] dwhdmi-imx 120000.hdmi: Detected HDMI controller 0x13:0xa:0xa0:0xc1
[ 7.527813] imx-drm display-subsystem: bound 120000.hdmi (ops dw_hdmi_imx_ops [dw_hdmi_imx])
[ 7.528741] imx-drm display-subsystem: No connectors reported connected with modes
[ 7.528750] [drm] Cannot find any crtc or sizes - going 1024x768
[ 7.609797] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.610449] systemd-journald[173]: Received request to flush runtime journal from PID 1
[ 7.611384] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.611395] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.615854] Console: switching to colour frame buffer device 128x48
[ 7.618266] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.618274] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 7.668017] imx-drm display-subsystem: fb0: frame buffer device
[ 7.693829] [drm] Initialized imx-drm 1.0.0 20120507 on minor 1
[ 7.701037] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 7.707897] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 9.259915] BTRFS: device label udoo-hdd devid 1 transid 107941 /dev/sda1
[ 10.171964] BTRFS info (device sda1): enabling auto defrag
[ 10.177520] BTRFS info (device sda1): disk space caching is enabled
[ 12.461309] random: crng init done
[ 12.501677] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 12.526764] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.850293] fsl-asoc-card sound: ASoC: CODEC DAI ac97-hifi not registered
[ 12.857239] fsl-asoc-card sound: snd_soc_register_card failed (-517)
[ 12.925899] Generic PHY 2188000.ethernet:06: attached PHY driver [Generic PHY] (mii_bus:phy_addr=2188000.ethernet:06, irq=-1)
[ 12.942567] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 20.204340] fec 2188000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 20.212121] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment