The right way to override any highlighting if you don't want to edit the colorscheme file directly

colorscheme-override.md

The right way to override any highlighting if you don't want to edit the colorscheme file directly

Generalities first

Suppose you have weird taste and you absolutely want:

• your visual selection to always have a green background and black foreground,
• your active statusline to always have a white background and red foreground,
• your very own deep blue background.

Your first reflex is probably to put those lines somewhere in your vimrc:

highlight Visual cterm=NONE ctermbg=76 ctermfg=16 gui=NONE guibg=#5fd700 guifg=#000000
highlight StatusLine cterm=NONE ctermbg=231 ctermfg=160 gui=NONE guibg=#ffffff guifg=#d70000
highlight Normal cterm=NONE ctermbg=17 gui=NONE guibg=#00005f
highlight NonText cterm=NONE ctermbg=17 gui=NONE guibg=#00005f

But it quickly appears that those lines have no effect if you source a colorscheme later in your vimrc so you move them below that colorscheme command:

colorscheme foobar

highlight Visual cterm=NONE ctermbg=76 ctermfg=16 gui=NONE guibg=#5fd700 guifg=#000000
highlight StatusLine cterm=NONE ctermbg=231 ctermfg=160 gui=NONE guibg=#ffffff guifg=#d70000
highlight Normal cterm=NONE ctermbg=17 gui=NONE guibg=#00005f
highlight NonText cterm=NONE ctermbg=17 gui=NONE guibg=#00005f

which gives the desired outcome. Everything is fine. In principle.

But you like to try new colorschemes, or you prefer to have different colorschemes for different filetypes or time of the day, and your overrides don't carry over when you change your colorscheme.

This is because colorschemes usually reset all highlighting, including your own, when they are sourced.

The solution is to override the desired highlights in an autocommand that's executed whenever any colorscheme is sourced:

augroup MyColors
    autocmd!
    autocmd ColorScheme * highlight Visual cterm=NONE ctermbg=76 ctermfg=16 gui=NONE guibg=#5fd700 guifg=#000000
                      \ | highlight StatusLine cterm=NONE ctermbg=231 ctermfg=160 gui=NONE guibg=#ffffff guifg=#d70000
                      \ | highlight Normal cterm=NONE ctermbg=17 gui=NONE guibg=#00005f
                      \ | highlight NonText cterm=NONE ctermbg=17 gui=NONE guibg=#00005f
augroup END

colorscheme foobar

Note that the autocommand will have no effect on previously sourced colorschemes so it must be added before any colorscheme is sourced.

Of course, we can go one step further and put all our highlights in a neat little function for maximum readability/managability/maintainability:

function! MyHighlights() abort
    highlight Visual     cterm=NONE ctermbg=76  ctermfg=16  gui=NONE guibg=#5fd700 guifg=#000000
    highlight StatusLine cterm=NONE ctermbg=231 ctermfg=160 gui=NONE guibg=#ffffff guifg=#d70000
    highlight Normal     cterm=NONE ctermbg=17              gui=NONE guibg=#00005f
    highlight NonText    cterm=NONE ctermbg=17              gui=NONE guibg=#00005f
endfunction

augroup MyColors
    autocmd!
    autocmd ColorScheme * call MyHighlights()
augroup END

colorscheme foobar

But I only want that override for a single colorscheme

The autocommands above use the glob * in order to override any colorscheme. If, say… you really like the colorscheme foobar but you can't stand its Visual highlight, you will want your autocommand to target that colorscheme specifically. To this end, you can use the name of that colorscheme instead of *:

autocommand ColorScheme foobar call MyHighlight()

or, if you want to target several colorschemes:

autocommand ColorScheme foobar,barbaz call MyHighlight()

But this doesn't work when I "auto-source" my vimrc

This won't work if you have an autocommand like the following in your vimrc because autocommands don't nest by default:

[...]
autocmd BufWritePost $MYVIMRC source $MYVIMRC
[...]

By default, autocommands don't trigger other autocommands. In this classic example, an autocommand is set to :source $MYVIMRC automatically when you write it. The problem, here, is that you are very likely to have a line like this one somewhere in your vimrc:

colorscheme whatever

which, when it is executed as part of the re-sourcing of your vimrc, won't trigger the ColorScheme autocommand because of that "no nesting" rule.

The solution is to add the nested keyword to that autocommand to allow other autocommands to be triggered by that event:

[...]
autocmd BufWritePost $MYVIMRC nested source $MYVIMRC
[...]

Reference

For all things concerning autocommands, see the aptly named :help autocommands. For all things concerning syntax highlighting, see :help syntax.

---

My Vim-related gists.

Sure. I spent some time investigating this with vimscript. It will look like this

if exists("colors_name")
  doautocmd ColorScheme
endif

This is useful if you cannot ensure that your autocmd Colorscheme definitions are executed before colorscheme {your-colorscheme} is executed. In my case, I am trying to modularize my config, and there is a plugin which adds some custom highlights using autocmd Colorscheme.

I am keeping each plugin configuration independent from each other to make it more maintainable. That way, for example, if I decide to remove this custom highlight plugin, I will do the change only in a single place.

OK, thanks for your input. You are free to do what you want with your config but FWIW, modularisation of one's Vim/Neovim is rarely worthwhile. The fact that you end up in a situation that requires such a hack is kind of telling.

Yeah of course, just wanted to share, maybe somebody will find this useful.

Thanks good approach ! 🙏

Vimscript equivalent for @kdarkhan's Lua snippet:

if g:colors_name == 'your-current-colorscheme'
    doautocmd ColorScheme
endif

Just a note, even the autocommand may not work right on colorschemes like this one that do async stuff. For this one the quick way I solved it was to resort to forking it, editing the stuff that it messes up, and just pointing my plugin loader at my fork.

thanks!

How does this work if I don't set any colorscheme? My use the colorscheme of my terminal.

@xiaoqixian, if you don't explicitly set a colorscheme, say with colorscheme malotru, then Vim uses its default colorscheme called default but the ColorScheme event is not triggered. Since this gist is based on autocommands and events, it can't work if the ColorScheme event is not triggered.

The solution is to set the default colorscheme explicitly:

colorscheme default

Thank you very much