romkatv/p10k-portable.zsh

## p10k-portable.zsh
# Powerlevel10k configuration file restricted to 8-color ASCII. Produced by
# running `p10k configure` while at 1387763f2719661dc7e43e86a5bfd24cc357d6a0
# and then editing ~/.p10k.zsh. Configuration wizard header follows.
#
# Generated by Powerlevel10k configuration wizard on 2019-11-12 at 08:45 CET.
# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 11792.
# Wizard options: compatible, lean, 2 lines, disconnected, no frame, sparse, concise.
# Type `p10k configure` to generate another config.

# Temporarily change options.
'builtin' 'local' '-a' 'p10k_config_opts'
[[ ! -o 'aliases'         ]] || p10k_config_opts+=('aliases')
[[ ! -o 'sh_glob'         ]] || p10k_config_opts+=('sh_glob')
[[ ! -o 'no_brace_expand' ]] || p10k_config_opts+=('no_brace_expand')
'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'

() {
  emulate -L zsh
  setopt no_unset extended_glob
  zmodload zsh/langinfo
  if [[ ${langinfo[CODESET]:-} != (utf|UTF)(-|)8 ]]; then
    local LC_ALL=${${(@M)$(locale -a):#*.(utf|UTF)(-|)8}[1]:-en_US.UTF-8}
  fi

  # Unset all configuration options. This allows you to apply configiguration changes without
  # restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
  unset -m 'POWERLEVEL9K_*'

  # The list of segments shown on the left. Fill it with the most important segments.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
      # =========================[ Line #1 ]=========================
      dir                     # current directory
      vcs                     # git status
      # =========================[ Line #2 ]=========================
      newline
      prompt_char             # prompt symbol
  )

  # The list of segments shown on the right. Fill it with less important segments.
  # Right prompt on the last prompt line (where you are typing your commands) gets
  # automatically hidden when the input line reaches it. Right prompt above the
  # last prompt line gets hidden if it would overlap with left prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
      # =========================[ Line #1 ]=========================
      status                  # exit code of the last command
      command_execution_time  # duration of the last command
      background_jobs         # presence of background jobs
      context                 # user@hostname
      # =========================[ Line #2 ]=========================
      newline
  )

  # Basic style options that define the overall look of your prompt. You probably don't want to
  # change them.
  typeset -g POWERLEVEL9K_BACKGROUND=                            # transparent background
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE=  # no surrounding whitespace
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' '  # separate segments with a space
  typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR=        # no end-of-line symbol

  # When set to true, icons appear before content on both sides of the prompt. When set
  # to false, icons go after content. If empty or not set, icons go before content in the left
  # prompt and after content in the right prompt.
  #
  # You can also override it for a specific segment:
  #
  #   POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
  #
  # Or for a specific segment in specific state:
  #
  #   POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
  typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true

  # Add an empty line before each prompt.
  typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true

  # Connect left prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
  # Connect right prompt lines with these symbols.
  typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
  typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
  typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=

  # The left end of left prompt.
  typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
  # The right end of right prompt.
  typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=

  ################################[ prompt_char: prompt symbol ]################################
  # Green prompt symbol if the last command succeeded.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2
  # Red prompt symbol if the last command failed.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
  # Default prompt symbol.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
  # Prompt symbol in command vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
  # Prompt symbol in visual vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
  # Prompt symbol in overwrite vi mode.
  typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
  typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
  typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''

  ##################################[ dir: current directory ]##################################
  # Default current directory color.
  typeset -g POWERLEVEL9K_DIR_FOREGROUND=4
  # If directory is too long, shorten some of its segments to the shortest possible unique
  # prefix. The shortened directory can be tab-completed to the original.
  typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
  # Replace removed segment suffixes with this symbol.
  typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
  # Color of the shortened directory segments.
  typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4
  # Color of the anchor directory segments. Anchor segments are never shortened. The first
  # segment is always an anchor.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4
  # Display anchor directory segments in bold.
  typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
  # Don't shorten directories that contain any of these files. They are anchors.
  local anchor_files=(
    .bzr
    .citc
    .git
    .hg
    .node-version
    .python-version
    .ruby-version
    .shorten_folder_marker
    .svn
    .terraform
    CVS
    Cargo.toml
    composer.json
    go.mod
    package.json
  )
  typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:|:)anchor_files})"
  # Don't shorten this many last directory segments. They are anchors.
  typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
  # Shorten directory if it's longer than this even if there is space for it. The value can
  # be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
  # directory will be shortened only when prompt doesn't fit or when other parameters demand it
  # (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
  typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
  # many columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
  # When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
  # COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
  typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50

  # Enable special styling for non-writable directories.
  typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
  # Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
  # above must be set to true for this parameter to have effect.
  typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='X'

  # Custom prefix.
  # typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '

  # POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons for different directories.
  # It must be an array with 3 * N elements. Each triplet consists of:
  #
  #   1. A pattern against which the current directory is matched. Matching is done with
  #      extended_glob option enabled.
  #   2. Directory class for the purpose of styling.
  #   3. Icon.
  #
  # Triplets are tried in order. The first triplet whose pattern matches $PWD wins. If there
  # are no matches, the directory will have no icon.
  #
  # Example:
  #
  #   typeset -g POWERLEVEL9K_DIR_CLASSES=(
  #       '~/work(/*)#'  WORK     '(╯°□°）╯︵ ┻━┻'
  #       '~(/*)#'       HOME     '⌂'
  #       '*'            DEFAULT  '')
  #
  # With these settings, the current directory in the prompt may look like this:
  #
  #   (╯°□°）╯︵ ┻━┻ ~/work/projects/important/urgent
  #
  # Or like this:
  #
  #   ⌂ ~/best/powerlevel10k
  #
  # You can also set different colors for directories of different classes. Remember to override
  # FOREGROUND, SHORTENED_FOREGROUND and ANCHOR_FOREGROUND for every directory class that you wish
  # to have its own color.
  #
  #   typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=31
  #   typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=103
  #   typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=39
  #
  typeset -g POWERLEVEL9K_DIR_CLASSES=()

  #####################################[ vcs: git status ]######################################
  # Branch icon.
  typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
  POWERLEVEL9K_VCS_BRANCH_ICON=${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}

  # Untracked files icon. It's really a question mark, your font isn't broken.
  # Change the value of this parameter to show a different icon.
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
  POWERLEVEL9K_VCS_UNTRACKED_ICON=${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}

  # Formatter for Git status.
  #
  # Example output: master <42 >42 *42 merge ~42 +42 !42 ?42.
  #
  # You can edit the function to customize how Git status looks.
  #
  # VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
  # https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
  function my_git_formatter() {
    emulate -L zsh

    if [[ -n $P9K_CONTENT ]]; then
      # If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
      # gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
      typeset -g my_git_format=$P9K_CONTENT
      return
    fi

    if (( $1 )); then
      # Styling for up-to-date Git status.
      local       meta='%f'   # default foreground
      local      clean='%2F'  # green foreground
      local   modified='%3F'  # yellow foreground
      local  untracked='%4F'  # blue foreground
      local conflicted='%1F'  # red foreground
    else
      # Styling for incomplete and stale Git status.
      local       meta='%5F'  # magenta foreground
      local      clean='%5F'  # magenta foreground
      local   modified='%5F'  # magenta foreground
      local  untracked='%5F'  # magenta foreground
      local conflicted='%5F'  # magenta foreground
    fi

    local res
    local where  # branch name, tag or commit
    if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
      res+="${clean}${POWERLEVEL9K_VCS_BRANCH_ICON}"
      where=${(V)VCS_STATUS_LOCAL_BRANCH}
    elif [[ -n $VCS_STATUS_TAG ]]; then
      res+="${meta}#"
      where=${(V)VCS_STATUS_TAG}
    else
      res+="${meta}@"
      where=${VCS_STATUS_COMMIT[1,8]}
    fi

    # If local branch name or tag is at most 32 characters long, show it in full.
    # Otherwise show the first 12 … the last 12.
    (( $#where > 32 )) && where[13,-13]="…"
    res+="${clean}${where//\%/%%}"  # escape %

    # Show tracking branch name if it differs from local branch.
    if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
      res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}"  # escape %
    fi

    # <42 if behind the remote.
    (( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
    # >42 if ahead of the remote.
    (( VCS_STATUS_COMMITS_AHEAD  )) && res+=" ${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
    # *42 if have stashes.
    (( VCS_STATUS_STASHES        )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
    # 'merge' if the repo is in an unusual state.
    [[ -n $VCS_STATUS_ACTION     ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
    # ~42 if have merge conflicts.
    (( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
    # +42 if have staged changes.
    (( VCS_STATUS_NUM_STAGED     )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
    # !42 if have unstaged changes.
    (( VCS_STATUS_NUM_UNSTAGED   )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
    # ?42 if have untracked files. It's really a question mark, your font isn't broken.
    # See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
    # Remove the next line if you don't want to see untracked files at all.
    (( VCS_STATUS_NUM_UNTRACKED  )) && res+=" ${untracked}${POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"

    typeset -g my_git_format=$res
  }
  functions -M my_git_formatter 2>/dev/null

  # Disable the default Git status formatting.
  typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
  # Install our own Git status formatter.
  typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
  typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
  # Enable counters for staged, unstaged, etc.
  typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

  # Icon color.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2
  typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=5
  # Custom icon.
  typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  # typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '

  # Show status of repositories of these types. You can add svn and/or hg if you are
  # using them. If you do, your prompt may become slow even when your current directory
  # isn't in an svn or hg reposotiry.
  typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

  # These settings are used for respositories other than Git or when gitstatusd fails and
  # Powerlevel10k has to fall back to using vcs_info.
  typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2
  typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3
  typeset -g POWERLEVEL9K_VCS_UNSTAGED_ICON='!'
  typeset -g POWERLEVEL9K_VCS_STAGED_ICON='+'
  typeset -g POWERLEVEL9K_VCS_STASH_ICON='*'
  typeset -g POWERLEVEL9K_VCS_INCOMING_CHANGES_ICON='<'
  typeset -g POWERLEVEL9K_VCS_OUTGOING_CHANGES_ICON='>'
  typeset -g POWERLEVEL9K_VCS_TAG_ICON='#'
  typeset -g POWERLEVEL9K_VCS_COMMIT_ICON='@'
  typeset -g POWERLEVEL9K_VCS_REMOTE_BRANCH_ICON=':'

  ##########################[ status: exit code of the last command ]###########################
  # Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
  # style them independently from the regular OK and ERROR state.
  typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

  # Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
  # it will signify success by turning green.
  typeset -g POWERLEVEL9K_STATUS_OK=false
  typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION=''

  # Status when some part of a pipe command fails but the overall exit status is zero. It may look
  # like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
  typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION=''

  # Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
  # it will signify error by turning red.
  typeset -g POWERLEVEL9K_STATUS_ERROR=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION=''

  # Status when the last command was terminated by a signal.
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1
  # Use terse signal names: "INT" instead of "SIGINT(2)".
  typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
  typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=''

  # Status when some part of a pipe command fails and the overall exit status is also non-zero.
  # It may look like this: 1|0.
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1
  typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION=''

  ###################[ command_execution_time: duration of the last command ]###################
  # Show duration of the last command if takes longer than this many seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
  # Show this many fractional digits. Zero means round to seconds.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
  # Execution time color.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3
  # Duration format: 1d 2h 3m 4s.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
  # Custom icon.
  typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
  # Custom prefix.
  # typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '

  #######################[ background_jobs: presence of background jobs ]#######################
  # Don't show the number of background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
  # Background jobs color.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=2
  # Icon to show when there are background jobs.
  typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='bg'

  ##################################[ context: user@hostname ]##################################
  # Default context color.
  typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=2
  # Default context format: %n is username, %m is hostname.
  typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'

  # Context color when running with privileges.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
  # Context format when running with privileges: bold user@hostname.
  typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'

  # Don't show context unless running with privileges or in SSH.
  # Tip: Remove the next line to always show context.
  typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=

  # Custom icon.
  # typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
  # Custom prefix.
  # typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith '

  # Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
  # when accepting a command line. Supported values:
  #
  #   - off:      Don't change prompt when accepting a command line.
  #   - always:   Trim down prompt when accepting a command line.
  #   - same-dir: Trim down prompt when accepting a command line unless this is the first command
  #               typed after changing current working directory.
  typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always

  # Instant prompt mode.
  #
  #   - off:     Disable instant prompt. Choose this if you've tried instant prompt and found
  #              it incompatible with your zsh configuration files.
  #   - quiet:   Enable instant prompt and don't print warnings when detecting console output
  #              during zsh initialization. Choose this if you've read and understood
  #              https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
  #   - verbose: Enable instant prompt and print a warning when detecting console output during
  #              zsh initialization. Choose this if you've never tried instant prompt, haven't
  #              seen the warning, or if you are unsure what this all means.
  typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose

  # Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
  # For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
  # can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
  # really need it.
  typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
}

(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
'builtin' 'unset' 'p10k_config_opts'
	# Powerlevel10k configuration file restricted to 8-color ASCII. Produced by
	# running `p10k configure` while at 1387763f2719661dc7e43e86a5bfd24cc357d6a0
	# and then editing ~/.p10k.zsh. Configuration wizard header follows.
	#
	# Generated by Powerlevel10k configuration wizard on 2019-11-12 at 08:45 CET.
	# Based on romkatv/powerlevel10k/config/p10k-lean.zsh, checksum 11792.
	# Wizard options: compatible, lean, 2 lines, disconnected, no frame, sparse, concise.
	# Type `p10k configure` to generate another config.

	# Temporarily change options.
	'builtin' 'local' '-a' 'p10k_config_opts'
	[[ ! -o 'aliases' ]] \|\| p10k_config_opts+=('aliases')
	[[ ! -o 'sh_glob' ]] \|\| p10k_config_opts+=('sh_glob')
	[[ ! -o 'no_brace_expand' ]] \|\| p10k_config_opts+=('no_brace_expand')
	'builtin' 'setopt' 'no_aliases' 'no_sh_glob' 'brace_expand'

	() {
	emulate -L zsh
	setopt no_unset extended_glob
	zmodload zsh/langinfo
	if [[ ${langinfo[CODESET]:-} != (utf\|UTF)(-\|)8 ]]; then
	local LC_ALL=${${(@M)$(locale -a):#*.(utf\|UTF)(-\|)8}[1]:-en_US.UTF-8}
	fi

	# Unset all configuration options. This allows you to apply configiguration changes without
	# restarting zsh. Edit ~/.p10k.zsh and type `source ~/.p10k.zsh`.
	unset -m 'POWERLEVEL9K_*'

	# The list of segments shown on the left. Fill it with the most important segments.
	typeset -g POWERLEVEL9K_LEFT_PROMPT_ELEMENTS=(
	# =========================[ Line #1 ]=========================
	dir # current directory
	vcs # git status
	# =========================[ Line #2 ]=========================
	newline
	prompt_char # prompt symbol
	)

	# The list of segments shown on the right. Fill it with less important segments.
	# Right prompt on the last prompt line (where you are typing your commands) gets
	# automatically hidden when the input line reaches it. Right prompt above the
	# last prompt line gets hidden if it would overlap with left prompt.
	typeset -g POWERLEVEL9K_RIGHT_PROMPT_ELEMENTS=(
	# =========================[ Line #1 ]=========================
	status # exit code of the last command
	command_execution_time # duration of the last command
	background_jobs # presence of background jobs
	context # user@hostname
	# =========================[ Line #2 ]=========================
	newline
	)

	# Basic style options that define the overall look of your prompt. You probably don't want to
	# change them.
	typeset -g POWERLEVEL9K_BACKGROUND= # transparent background
	typeset -g POWERLEVEL9K_{LEFT,RIGHT}_{LEFT,RIGHT}_WHITESPACE= # no surrounding whitespace
	typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SUBSEGMENT_SEPARATOR=' ' # separate segments with a space
	typeset -g POWERLEVEL9K_{LEFT,RIGHT}_SEGMENT_SEPARATOR= # no end-of-line symbol

	# When set to true, icons appear before content on both sides of the prompt. When set
	# to false, icons go after content. If empty or not set, icons go before content in the left
	# prompt and after content in the right prompt.
	#
	# You can also override it for a specific segment:
	#
	# POWERLEVEL9K_STATUS_ICON_BEFORE_CONTENT=false
	#
	# Or for a specific segment in specific state:
	#
	# POWERLEVEL9K_DIR_NOT_WRITABLE_ICON_BEFORE_CONTENT=false
	typeset -g POWERLEVEL9K_ICON_BEFORE_CONTENT=true

	# Add an empty line before each prompt.
	typeset -g POWERLEVEL9K_PROMPT_ADD_NEWLINE=true

	# Connect left prompt lines with these symbols.
	typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_PREFIX=
	typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_PREFIX=
	typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_PREFIX=
	# Connect right prompt lines with these symbols.
	typeset -g POWERLEVEL9K_MULTILINE_FIRST_PROMPT_SUFFIX=
	typeset -g POWERLEVEL9K_MULTILINE_NEWLINE_PROMPT_SUFFIX=
	typeset -g POWERLEVEL9K_MULTILINE_LAST_PROMPT_SUFFIX=

	# The left end of left prompt.
	typeset -g POWERLEVEL9K_LEFT_PROMPT_FIRST_SEGMENT_START_SYMBOL=
	# The right end of right prompt.
	typeset -g POWERLEVEL9K_RIGHT_PROMPT_LAST_SEGMENT_END_SYMBOL=

	################################[ prompt_char: prompt symbol ]################################
	# Green prompt symbol if the last command succeeded.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_OK_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=2
	# Red prompt symbol if the last command failed.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_ERROR_{VIINS,VICMD,VIVIS,VIOWR}_FOREGROUND=1
	# Default prompt symbol.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIINS_CONTENT_EXPANSION='>'
	# Prompt symbol in command vi mode.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VICMD_CONTENT_EXPANSION='<'
	# Prompt symbol in visual vi mode.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIVIS_CONTENT_EXPANSION='V'
	# Prompt symbol in overwrite vi mode.
	typeset -g POWERLEVEL9K_PROMPT_CHAR_{OK,ERROR}_VIOWR_CONTENT_EXPANSION='^'
	typeset -g POWERLEVEL9K_PROMPT_CHAR_OVERWRITE_STATE=true
	typeset -g POWERLEVEL9K_PROMPT_CHAR_LEFT_PROMPT_LAST_SEGMENT_END_SYMBOL=''

	##################################[ dir: current directory ]##################################
	# Default current directory color.
	typeset -g POWERLEVEL9K_DIR_FOREGROUND=4
	# If directory is too long, shorten some of its segments to the shortest possible unique
	# prefix. The shortened directory can be tab-completed to the original.
	typeset -g POWERLEVEL9K_SHORTEN_STRATEGY=truncate_to_unique
	# Replace removed segment suffixes with this symbol.
	typeset -g POWERLEVEL9K_SHORTEN_DELIMITER=
	# Color of the shortened directory segments.
	typeset -g POWERLEVEL9K_DIR_SHORTENED_FOREGROUND=4
	# Color of the anchor directory segments. Anchor segments are never shortened. The first
	# segment is always an anchor.
	typeset -g POWERLEVEL9K_DIR_ANCHOR_FOREGROUND=4
	# Display anchor directory segments in bold.
	typeset -g POWERLEVEL9K_DIR_ANCHOR_BOLD=false
	# Don't shorten directories that contain any of these files. They are anchors.
	local anchor_files=(
	.bzr
	.citc
	.git
	.hg
	.node-version
	.python-version
	.ruby-version
	.shorten_folder_marker
	.svn
	.terraform
	CVS
	Cargo.toml
	composer.json
	go.mod
	package.json
	)
	typeset -g POWERLEVEL9K_SHORTEN_FOLDER_MARKER="(${(j:\|:)anchor_files})"
	# Don't shorten this many last directory segments. They are anchors.
	typeset -g POWERLEVEL9K_SHORTEN_DIR_LENGTH=1
	# Shorten directory if it's longer than this even if there is space for it. The value can
	# be either absolute (e.g., '80') or a percentage of terminal width (e.g, '50%'). If empty,
	# directory will be shortened only when prompt doesn't fit or when other parameters demand it
	# (see POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS and POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT below).
	typeset -g POWERLEVEL9K_DIR_MAX_LENGTH=80
	# When `dir` segment is on the last prompt line, try to shorten it enough to leave at least this
	# many columns for typing commands.
	typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS=40
	# When `dir` segment is on the last prompt line, try to shorten it enough to leave at least
	# COLUMNS * POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT * 0.01 columns for typing commands.
	typeset -g POWERLEVEL9K_DIR_MIN_COMMAND_COLUMNS_PCT=50

	# Enable special styling for non-writable directories.
	typeset -g POWERLEVEL9K_DIR_SHOW_WRITABLE=true
	# Show this icon when the current directory is not writable. POWERLEVEL9K_DIR_SHOW_WRITABLE
	# above must be set to true for this parameter to have effect.
	typeset -g POWERLEVEL9K_DIR_NOT_WRITABLE_VISUAL_IDENTIFIER_EXPANSION='X'

	# Custom prefix.
	# typeset -g POWERLEVEL9K_DIR_PREFIX='%fin '

	# POWERLEVEL9K_DIR_CLASSES allows you to specify custom icons for different directories.
	# It must be an array with 3 * N elements. Each triplet consists of:
	#
	# 1. A pattern against which the current directory is matched. Matching is done with
	# extended_glob option enabled.
	# 2. Directory class for the purpose of styling.
	# 3. Icon.
	#
	# Triplets are tried in order. The first triplet whose pattern matches $PWD wins. If there
	# are no matches, the directory will have no icon.
	#
	# Example:
	#
	# typeset -g POWERLEVEL9K_DIR_CLASSES=(
	# '~/work(/*)#' WORK '(╯°□°）╯︵ ┻━┻'
	# '~(/*)#' HOME '⌂'
	# '*' DEFAULT '')
	#
	# With these settings, the current directory in the prompt may look like this:
	#
	# (╯°□°）╯︵ ┻━┻ ~/work/projects/important/urgent
	#
	# Or like this:
	#
	# ⌂ ~/best/powerlevel10k
	#
	# You can also set different colors for directories of different classes. Remember to override
	# FOREGROUND, SHORTENED_FOREGROUND and ANCHOR_FOREGROUND for every directory class that you wish
	# to have its own color.
	#
	# typeset -g POWERLEVEL9K_DIR_WORK_FOREGROUND=31
	# typeset -g POWERLEVEL9K_DIR_WORK_SHORTENED_FOREGROUND=103
	# typeset -g POWERLEVEL9K_DIR_WORK_ANCHOR_FOREGROUND=39
	#
	typeset -g POWERLEVEL9K_DIR_CLASSES=()

	#####################################[ vcs: git status ]######################################
	# Branch icon.
	typeset -g POWERLEVEL9K_VCS_BRANCH_ICON=
	POWERLEVEL9K_VCS_BRANCH_ICON=${(g::)POWERLEVEL9K_VCS_BRANCH_ICON}

	# Untracked files icon. It's really a question mark, your font isn't broken.
	# Change the value of this parameter to show a different icon.
	typeset -g POWERLEVEL9K_VCS_UNTRACKED_ICON='?'
	POWERLEVEL9K_VCS_UNTRACKED_ICON=${(g::)POWERLEVEL9K_VCS_UNTRACKED_ICON}

	# Formatter for Git status.
	#
	# Example output: master <42 >42 *42 merge ~42 +42 !42 ?42.
	#
	# You can edit the function to customize how Git status looks.
	#
	# VCS_STATUS_* parameters are set by gitstatus plugin. See reference:
	# https://github.com/romkatv/gitstatus/blob/master/gitstatus.plugin.zsh.
	function my_git_formatter() {
	emulate -L zsh

	if [[ -n $P9K_CONTENT ]]; then
	# If P9K_CONTENT is not empty, use it. It's either "loading" or from vcs_info (not from
	# gitstatus plugin). VCS_STATUS_* parameters are not available in this case.
	typeset -g my_git_format=$P9K_CONTENT
	return
	fi

	if (( $1 )); then
	# Styling for up-to-date Git status.
	local meta='%f' # default foreground
	local clean='%2F' # green foreground
	local modified='%3F' # yellow foreground
	local untracked='%4F' # blue foreground
	local conflicted='%1F' # red foreground
	else
	# Styling for incomplete and stale Git status.
	local meta='%5F' # magenta foreground
	local clean='%5F' # magenta foreground
	local modified='%5F' # magenta foreground
	local untracked='%5F' # magenta foreground
	local conflicted='%5F' # magenta foreground
	fi

	local res
	local where # branch name, tag or commit
	if [[ -n $VCS_STATUS_LOCAL_BRANCH ]]; then
	res+="${clean}${POWERLEVEL9K_VCS_BRANCH_ICON}"
	where=${(V)VCS_STATUS_LOCAL_BRANCH}
	elif [[ -n $VCS_STATUS_TAG ]]; then
	res+="${meta}#"
	where=${(V)VCS_STATUS_TAG}
	else
	res+="${meta}@"
	where=${VCS_STATUS_COMMIT[1,8]}
	fi

	# If local branch name or tag is at most 32 characters long, show it in full.
	# Otherwise show the first 12 … the last 12.
	(( $#where > 32 )) && where[13,-13]="…"
	res+="${clean}${where//\%/%%}" # escape %

	# Show tracking branch name if it differs from local branch.
	if [[ -n ${VCS_STATUS_REMOTE_BRANCH:#$VCS_STATUS_LOCAL_BRANCH} ]]; then
	res+="${meta}:${clean}${(V)VCS_STATUS_REMOTE_BRANCH//\%/%%}" # escape %
	fi

	# <42 if behind the remote.
	(( VCS_STATUS_COMMITS_BEHIND )) && res+=" ${clean}<${VCS_STATUS_COMMITS_BEHIND}"
	# >42 if ahead of the remote.
	(( VCS_STATUS_COMMITS_AHEAD )) && res+=" ${clean}⇡${VCS_STATUS_COMMITS_AHEAD}"
	# *42 if have stashes.
	(( VCS_STATUS_STASHES )) && res+=" ${clean}*${VCS_STATUS_STASHES}"
	# 'merge' if the repo is in an unusual state.
	[[ -n $VCS_STATUS_ACTION ]] && res+=" ${conflicted}${VCS_STATUS_ACTION}"
	# ~42 if have merge conflicts.
	(( VCS_STATUS_NUM_CONFLICTED )) && res+=" ${conflicted}~${VCS_STATUS_NUM_CONFLICTED}"
	# +42 if have staged changes.
	(( VCS_STATUS_NUM_STAGED )) && res+=" ${modified}+${VCS_STATUS_NUM_STAGED}"
	# !42 if have unstaged changes.
	(( VCS_STATUS_NUM_UNSTAGED )) && res+=" ${modified}!${VCS_STATUS_NUM_UNSTAGED}"
	# ?42 if have untracked files. It's really a question mark, your font isn't broken.
	# See POWERLEVEL9K_VCS_UNTRACKED_ICON above if you want to use a different icon.
	# Remove the next line if you don't want to see untracked files at all.
	(( VCS_STATUS_NUM_UNTRACKED )) && res+=" ${untracked}${POWERLEVEL9K_VCS_UNTRACKED_ICON}${VCS_STATUS_NUM_UNTRACKED}"

	typeset -g my_git_format=$res
	}
	functions -M my_git_formatter 2>/dev/null

	# Disable the default Git status formatting.
	typeset -g POWERLEVEL9K_VCS_DISABLE_GITSTATUS_FORMATTING=true
	# Install our own Git status formatter.
	typeset -g POWERLEVEL9K_VCS_CONTENT_EXPANSION='${$((my_git_formatter(1)))+${my_git_format}}'
	typeset -g POWERLEVEL9K_VCS_LOADING_CONTENT_EXPANSION='${$((my_git_formatter(0)))+${my_git_format}}'
	# Enable counters for staged, unstaged, etc.
	typeset -g POWERLEVEL9K_VCS_{STAGED,UNSTAGED,UNTRACKED,CONFLICTED,COMMITS_AHEAD,COMMITS_BEHIND}_MAX_NUM=-1

	# Icon color.
	typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_COLOR=2
	typeset -g POWERLEVEL9K_VCS_LOADING_VISUAL_IDENTIFIER_COLOR=5
	# Custom icon.
	typeset -g POWERLEVEL9K_VCS_VISUAL_IDENTIFIER_EXPANSION=
	# Custom prefix.
	# typeset -g POWERLEVEL9K_VCS_PREFIX='%fon '

	# Show status of repositories of these types. You can add svn and/or hg if you are
	# using them. If you do, your prompt may become slow even when your current directory
	# isn't in an svn or hg reposotiry.
	typeset -g POWERLEVEL9K_VCS_BACKENDS=(git)

	# These settings are used for respositories other than Git or when gitstatusd fails and
	# Powerlevel10k has to fall back to using vcs_info.
	typeset -g POWERLEVEL9K_VCS_CLEAN_FOREGROUND=2
	typeset -g POWERLEVEL9K_VCS_UNTRACKED_FOREGROUND=2
	typeset -g POWERLEVEL9K_VCS_MODIFIED_FOREGROUND=3
	typeset -g POWERLEVEL9K_VCS_UNSTAGED_ICON='!'
	typeset -g POWERLEVEL9K_VCS_STAGED_ICON='+'
	typeset -g POWERLEVEL9K_VCS_STASH_ICON='*'
	typeset -g POWERLEVEL9K_VCS_INCOMING_CHANGES_ICON='<'
	typeset -g POWERLEVEL9K_VCS_OUTGOING_CHANGES_ICON='>'
	typeset -g POWERLEVEL9K_VCS_TAG_ICON='#'
	typeset -g POWERLEVEL9K_VCS_COMMIT_ICON='@'
	typeset -g POWERLEVEL9K_VCS_REMOTE_BRANCH_ICON=':'

	##########################[ status: exit code of the last command ]###########################
	# Enable OK_PIPE, ERROR_PIPE and ERROR_SIGNAL status states to allow us to enable, disable and
	# style them independently from the regular OK and ERROR state.
	typeset -g POWERLEVEL9K_STATUS_EXTENDED_STATES=true

	# Status on success. No content, just an icon. No need to show it if prompt_char is enabled as
	# it will signify success by turning green.
	typeset -g POWERLEVEL9K_STATUS_OK=false
	typeset -g POWERLEVEL9K_STATUS_OK_FOREGROUND=2
	typeset -g POWERLEVEL9K_STATUS_OK_VISUAL_IDENTIFIER_EXPANSION=''

	# Status when some part of a pipe command fails but the overall exit status is zero. It may look
	# like this: 1\|0.
	typeset -g POWERLEVEL9K_STATUS_OK_PIPE=true
	typeset -g POWERLEVEL9K_STATUS_OK_PIPE_FOREGROUND=2
	typeset -g POWERLEVEL9K_STATUS_OK_PIPE_VISUAL_IDENTIFIER_EXPANSION=''

	# Status when it's just an error code (e.g., '1'). No need to show it if prompt_char is enabled as
	# it will signify error by turning red.
	typeset -g POWERLEVEL9K_STATUS_ERROR=false
	typeset -g POWERLEVEL9K_STATUS_ERROR_FOREGROUND=1
	typeset -g POWERLEVEL9K_STATUS_ERROR_VISUAL_IDENTIFIER_EXPANSION=''

	# Status when the last command was terminated by a signal.
	typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL=true
	typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_FOREGROUND=1
	# Use terse signal names: "INT" instead of "SIGINT(2)".
	typeset -g POWERLEVEL9K_STATUS_VERBOSE_SIGNAME=false
	typeset -g POWERLEVEL9K_STATUS_ERROR_SIGNAL_VISUAL_IDENTIFIER_EXPANSION=''

	# Status when some part of a pipe command fails and the overall exit status is also non-zero.
	# It may look like this: 1\|0.
	typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE=true
	typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_FOREGROUND=1
	typeset -g POWERLEVEL9K_STATUS_ERROR_PIPE_VISUAL_IDENTIFIER_EXPANSION=''

	###################[ command_execution_time: duration of the last command ]###################
	# Show duration of the last command if takes longer than this many seconds.
	typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_THRESHOLD=3
	# Show this many fractional digits. Zero means round to seconds.
	typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PRECISION=0
	# Execution time color.
	typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FOREGROUND=3
	# Duration format: 1d 2h 3m 4s.
	typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_FORMAT='d h m s'
	# Custom icon.
	typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_VISUAL_IDENTIFIER_EXPANSION=
	# Custom prefix.
	# typeset -g POWERLEVEL9K_COMMAND_EXECUTION_TIME_PREFIX='%ftook '

	#######################[ background_jobs: presence of background jobs ]#######################
	# Don't show the number of background jobs.
	typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VERBOSE=false
	# Background jobs color.
	typeset -g POWERLEVEL9K_BACKGROUND_JOBS_FOREGROUND=2
	# Icon to show when there are background jobs.
	typeset -g POWERLEVEL9K_BACKGROUND_JOBS_VISUAL_IDENTIFIER_EXPANSION='bg'

	##################################[ context: user@hostname ]##################################
	# Default context color.
	typeset -g POWERLEVEL9K_CONTEXT_FOREGROUND=2
	# Default context format: %n is username, %m is hostname.
	typeset -g POWERLEVEL9K_CONTEXT_TEMPLATE='%n@%m'

	# Context color when running with privileges.
	typeset -g POWERLEVEL9K_CONTEXT_ROOT_FOREGROUND=1
	# Context format when running with privileges: bold user@hostname.
	typeset -g POWERLEVEL9K_CONTEXT_ROOT_TEMPLATE='%n@%m'

	# Don't show context unless running with privileges or in SSH.
	# Tip: Remove the next line to always show context.
	typeset -g POWERLEVEL9K_CONTEXT_{DEFAULT,SUDO}_{CONTENT,VISUAL_IDENTIFIER}_EXPANSION=

	# Custom icon.
	# typeset -g POWERLEVEL9K_CONTEXT_VISUAL_IDENTIFIER_EXPANSION='⭐'
	# Custom prefix.
	# typeset -g POWERLEVEL9K_CONTEXT_PREFIX='%fwith '

	# Transient prompt works similarly to the builtin transient_rprompt option. It trims down prompt
	# when accepting a command line. Supported values:
	#
	# - off: Don't change prompt when accepting a command line.
	# - always: Trim down prompt when accepting a command line.
	# - same-dir: Trim down prompt when accepting a command line unless this is the first command
	# typed after changing current working directory.
	typeset -g POWERLEVEL9K_TRANSIENT_PROMPT=always

	# Instant prompt mode.
	#
	# - off: Disable instant prompt. Choose this if you've tried instant prompt and found
	# it incompatible with your zsh configuration files.
	# - quiet: Enable instant prompt and don't print warnings when detecting console output
	# during zsh initialization. Choose this if you've read and understood
	# https://github.com/romkatv/powerlevel10k/blob/master/README.md#instant-prompt.
	# - verbose: Enable instant prompt and print a warning when detecting console output during
	# zsh initialization. Choose this if you've never tried instant prompt, haven't
	# seen the warning, or if you are unsure what this all means.
	typeset -g POWERLEVEL9K_INSTANT_PROMPT=verbose

	# Hot reload allows you to change POWERLEVEL9K options after Powerlevel10k has been initialized.
	# For example, you can type POWERLEVEL9K_BACKGROUND=red and see your prompt turn red. Hot reload
	# can slow down prompt by 1-2 milliseconds, so it's better to keep it turned off unless you
	# really need it.
	typeset -g POWERLEVEL9K_DISABLE_HOT_RELOAD=true
	}

	(( ${#p10k_config_opts} )) && setopt ${p10k_config_opts[@]}
	'builtin' 'unset' 'p10k_config_opts'