Skip to content

Instantly share code, notes, and snippets.

@rwest
Forked from symposion/README
Created January 9, 2012 16:42
Show Gist options
  • Save rwest/1583781 to your computer and use it in GitHub Desktop.
Save rwest/1583781 to your computer and use it in GitHub Desktop.
Convert OS X Keychain exported entries into logins for 1Password import
These two files should help you to import passwords from mac OS X keychains to 1password.
Assumptions:
1) You have some experience with scripting/are a power-user. These scripts worked for me
but they haven't been extensively tested and if they don't work, you're on your own!
Please read this whole document before starting this process. If any of it seems
incomprehensible/frightening/over your head please do not use these scripts. You will
probably do something Very Bad and I wouldn't want that.
2) You have ruby 1.9.2 installed on your machine. This comes as standard with Lion, previous
versions of OS X may have earlier versions of ruby, which *may* work, but then again, they
may not :-) You can check by opening the terminal application and typing ruby -v.
NB. The script has now been modified to work with ruby 1.8.7 (which is actually standard with Lion.
3) *THIS IS IMPORTANT* None of your passwords, usernames or site names contains a comma. It's
highly unlikely that a site name will contain a comma, fairly unlikely that usernames will,
but eminently possible that your passwords might. If they do, this script *will not work*
as supplied. You can modify it to quote all the values (there's a function for this already
in the script) before it outputs them, but beware: if any of your passwords contains a "
character it will break if you do this. If you have both quotes and commas in your passwords,
well, damn, you're fresh out of luck. The best you can do is to find the passwords with commas
in and remove them manually from the exported keychain (I'll mention where to do this below)
Instructions:
0) Save keychain.rb and click_allow.scpt in your home directory.
1) Enable full GUI scripting by going to the Universal Access System Preference Pane
and checking "Enable access for assistive devices"
2) Open the Terminal application and run the following command:
security dump-keychain -d login.keychain > keychain.txt
(If you have multiple keychains you should repeat this whole process once from step 2 onwards for
each one. You will have to change 'login.keychain' to 'foo.keychain' or somesuch.)
3) When you run the above command, the system will ask for permission to use your keychain. If you
have a separate keychain password/have paranoid settings on your keychain, you may need to enter
a password now. Otherwise, you will be presented with a dialog box asking you whether you want to
allow permission to access the first item in your keychain. You will be asked this once for every
item in your keychain (zzz). This is where the other file comes in:
4) Find the click_allow.scpt in your home directory using Finder, double click it. It will open in
the AppleScript editor. Click the run button. If all is well, the script will click the "Allow"
button for you lots of times until all of your keychain entries have been exported. Shouldn't
take more than a few minutes even for hundreds of entries.
5) When that finishes, go back to the Terminal window and run the following command:
ruby keychain.rb keychain.txt | sort > keychain.csv
6) If all is well, that command will finish very quickly without any message. If it spouts an error
at you, sorry, you'll have to fix the script, something's broken. Otherwise you should try opening
up keychain.csv in your favourite text editor (TextEdit? <shiver>) to make sure it contains a list
of keychain entries. Now is the time to search for passwords containing a comma (you may need regular
expressions to do this if you have a lot of keychain entries, since it's a comma-separated file)
and delete them to stop them hosing the 1password import. You'll have to enter these manually, hopefully
it isn't too many.
7) Fire up 1password and choose File>Import. You want to import keychain.csv as a "CSV or Delimited Text"
file. The process is fairly self-explanatory, make sure you select "comma" as the delimiter at the
appropriate point. You will have to tell it which columns correspond to which fields (this is pretty
obvious) and you should check that there are exactly five columns. If you're seeing more than five
columns, one of your values contains a rogue comma and you need to fix it manually before you import the
file or it won't work. The 5th column is optional - it's the last modified date for the keychain entry;
unfortunately 1password won't let you import this as the "modified date" for the password but I put
it in a notes field just in case since I often find it helpful to know when a password was set.
8) IMPORTANT: You now have 2 files on your hard disk that contain unencrypted passwords. You need to delete
these securely if you are concerned about the possibility that someone might get your passwords. You have
two options. The easy option is to use Finder to move them to Trash, and then Secure Empty Trash. If you
are one of these funny people who likes to use their Trash Can as a temporary storage location and don't
want to empty it, you can go back to the terminal and issue rm keychain.csv keychain.txt, and then fire up Disk
Utility and use the "Erase Free Space" command on the relevant hard disk to securely blank all the free
space on your drive (this may take some time). NB: If you have an SSD drive in your computer there will be
no Secure Empty Trash (only plain Empty Trash) and there will be no "Erase Free Space" in Disk Utility.
This is because some SSDs delete things much more permanently than traditional hard disks by default, so
these commands are redundant. Simply emptying the trash/rm-ing the file from the terminal will suffice in
this case.
Acknowledgements: The original ruby script was written by Morgan Schweers of https://github.com/cyberfox. I've merely fixed bits that didn't work for me, and added the script to push the Allow button + this documentation.
tell application "System Events"
repeat while exists (processes where name is "SecurityAgent")
tell process "SecurityAgent"
click button "Allow" of group 1 of window 1
end tell
delay 0.2
end repeat
end tell
#!/usr/bin/env ruby
#
# Usage:
# security dump-keychain -d login.keychain > keychain_logins.txt
# # Lots of clicking 'Always Allow', or just 'Allow', until it's done...
# curl -O curl -O https://raw.github.com/gist/1224792/06fff24412311714ad6534ab700a7d603c0a56c9/keychain.rb
# chmod a+x ./keychain.rb
# ./keychain.rb keychain_logins.txt | sort > logins.csv
#
# Then import logins.csv in 1Password using the format:
# Title, URL/Location, Username, Password
# Remember to check 'Fields are quoted', and the Delimiter character of 'Comma'.
require 'date'
class KeychainEntry
attr_accessor :fields
def initialize(keychain)
last_key = nil
@fields = {}
data = nil
aggregate = nil
lines = keychain.split("\n")
lines.each do |line|
# Everything after the 'data:' statement is data.
if data != nil
data << line
elsif aggregate != nil
if ( line[0] == 32 || line[0] == " " )
keyvalue = line.split('=', 2).collect { |kv| kv.strip }
aggregate[keyvalue.first] = keyvalue.last
else
@fields[last_key] = aggregate
aggregate = nil
end
end
if aggregate == nil
parts = line.split(':').collect { |piece| piece.strip }
if parts.length > 1
@fields[parts.first] = parts.last
else
last_key = parts.first
data = [] if parts.first == "data"
aggregate = {}
end
end
end
@fields["data"] = data.join(" ") if data
end
end
def q(string)
"\"#{string}\""
end
def process_entry(entry_string)
entry = KeychainEntry.new(entry_string)
if entry.fields['class'] == '"inet"' && ['"form"', '"dflt"'].include?(entry.fields['attributes']['"atyp"<blob>'])
site = entry.fields['attributes']['"srvr"<blob>'].gsub!('"', '')
path = entry.fields['attributes']['"path"<blob>'].gsub!('"', '')
proto= entry.fields['attributes']['"ptcl"<uint32>'].gsub!('"', '')
proto.gsub!('htps', 'https');
user = entry.fields['attributes']['"acct"<blob>'].gsub!('"', '')
#user = entry.fields['attributes']['0x00000007 <blob>'].gsub!('"', '')
date_string = entry.fields['attributes']['"mdat"<timedate>'].gsub(/0x[^ ]+[ ]+/, '').gsub!('"', '')
date = DateTime.parse(date_string)
pass = entry.fields['data'][1..-2]
path = '' if path == '<NULL>'
url = "#{proto}://#{site}#{path}"
puts "#{site},#{url},#{user},#{pass},#{date}"
#puts "#{user}, #{pass}, #{date}"
end
end
accum = ''
ARGF.each_line do |line|
if line =~ /^keychain: /
unless accum.empty?
process_entry(accum)
accum = ''
end
end
accum += line
end
@DmytroSoroka
Copy link

Same issue as described by hot-ham-water (weird name)

@roquie
Copy link

roquie commented Nov 30, 2015

Bugfix for error (ruby 2.0):

keychain.rb:66:in `process_entry': undefined method `gsub!' for nil:NilClass (NoMethodError)
    from keychain.rb:84:in `block in <main>'
    from keychain.rb:81:in `each_line'
    from keychain.rb:81:in `each_line'
    from keychain.rb:81:in `<main>'

...and bugfix import csv to 1password 5.4 ver. (add double-quotes)

#!/usr/bin/env ruby                                                                                                                                                                                                          
#                                                                                                                                                                                                                            
# Usage:                                                                                                                                                                                                                     
#   security dump-keychain -d login.keychain > keychain_logins.txt                                                                                                                                                           
#   # Lots of clicking 'Always Allow', or just 'Allow', until it's done...                                                                                                                                                   
#   curl -O curl -O https://raw.github.com/gist/1224792/06fff24412311714ad6534ab700a7d603c0a56c9/keychain.rb
#   chmod a+x ./keychain.rb                                                                                                                                                                                                  
#   ./keychain.rb keychain_logins.txt | sort > logins.csv                                                                                                                                                                    
#                                                                                                                                                                                                                            
# Then import logins.csv in 1Password using the format:                                                                                                                                                                      
# Title, URL/Location, Username, Password                                                                                                                                                                                    
# Remember to check 'Fields are quoted', and the Delimiter character of 'Comma'.                                                                                                                                             
require 'date'

class KeychainEntry
  attr_accessor :fields

  def initialize(keychain)
    last_key = nil
    @fields = {}
    data = nil
    aggregate = nil
    lines = keychain.split("\n")
    lines.each do |line|
      # Everything after the 'data:' statement is data.

      if data != nil
        data << line
      elsif aggregate != nil
        if ( line[0] == 32 || line[0] == " " )
          keyvalue = line.split('=', 2).collect { |kv| kv.strip }
          aggregate[keyvalue.first] = keyvalue.last
        else
          @fields[last_key] = aggregate
          aggregate = nil
        end
      end

      if aggregate == nil
        parts = line.split(':').collect { |piece| piece.strip }
        if parts.length > 1
          @fields[parts.first] = parts.last
        else
          last_key = parts.first
          data = [] if parts.first == "data"
          aggregate = {}
        end
      end
    end
    @fields["data"] = data.join(" ") if data
  end
end

def q(string)
  "\"#{string}\""
end

def process_entry(entry_string)
  entry = KeychainEntry.new(entry_string)


  if entry.fields['class'] == '"inet"' && ['"form"', '"dflt"'].include?(entry.fields['attributes']['"atyp"<blob>'])
    site = entry.fields['attributes']['"srvr"<blob>'].to_s.gsub!('"', '')
    path = entry.fields['attributes']['"path"<blob>'].to_s.gsub!('"', '')
    proto= entry.fields['attributes']['"ptcl"<uint32>'].to_s.gsub!('"', '')
    proto.to_s.gsub!('htps', 'https');
    user = entry.fields['attributes']['"acct"<blob>'].to_s.gsub!('"', '')
    #user = entry.fields['attributes']['0x00000007 <blob>'].gsub!('"', '')
    date_string = entry.fields['attributes']['"mdat"<timedate>'].to_s.gsub(/0x[^ ]+[ ]+/, '').to_s.gsub!('"', '')
    date = DateTime.parse(date_string)
    pass = entry.fields['data'][1..-2]
    path = '' if path == '<NULL>'
    url = "#{proto}://#{site}#{path}"

    puts "\"#{site}\",\"#{url}\",\"#{user}\",\"#{pass}\",\"#{date}\""
    #puts "#{user}, #{pass}, #{date}"
  end
end

accum = ''
ARGF.each_line do |line|
  if line =~ /^keychain: /
    unless accum.empty?
      process_entry(accum)
      accum = ''
    end
  end
  accum += line
end

@lambchoplee
Copy link

On El Capitan try this:

tell application "System Events"
repeat while exists (processes where name is "SecurityAgent")
tell process "SecurityAgent"
click button 3 of window 1
end tell
delay 1
end repeat
end tell

@landry314
Copy link

when you run the command to dump, just run it with sudo and you don't have to type in a password more than twice... click_allow.scpt is elegant in a way but a waste of time. instead use:

sudo security dump-keychain -d login.keychain > keychain.txt

then type in your login password... simple.

@landry314
Copy link

This is weird... If the card had a pencil icon in Apple Keychain Access, it does not get into the CSV. It doesn't matter if it says "application password" or "Internet password" or the format of the URL field.

Apple doesn't let you change which kind of entry it is. When you created the entry originally you either put a URL or a Name in there and apple picked the type of entry to make it even though they seem completely the same. What was the point? No idea.

But why does the script ignore the entries that were originally not made with URLs? I need to manually go through all those entries now and copy the data out... easier than figuring out what is wrong in the script. Maybe someone else would like to try.

@epu
Copy link

epu commented Apr 29, 2016

Thanks lambchoplee that super did it.

@David-C-Harris
Copy link

Thanks to @rwest for original - very helpful.!!!

@roquie - Am working with your update, thanks, but also am N00b in Applescript - have three keychains Login (98), iCloud (260), System (52) and running El Capitan 10.11.5. The Login dump is working fine but when I change to iCloud and System it dumps blank.

Do I have the sudo correct (thanks @landry314).?

  1. sudo security dump-keychain -d login.keychain > login.txt
  2. sudo security dump-keychain -d icloud.keychain > icloud.txt
  3. sudo security dump-keychain -d system.keychain > system.txt

I'm possibly getting confused in what to execute in the original eight steps. Can someone please confirm and/or update them to work with El Capitan if not already, and ability to also export iCloud or any other keychain to both 1Password and also CSV. I also couldn't find /system preferences/security & privacy/privacy "Enable access for assistive devices either, but maybe that's part of the issue, and then I couldn't get the System Events script to work either - possibly related.

And finally, I can't change password to blank without risking losing the keychain either as my OSX user login is sync'd with Apple ID, but at worst I'm still happy to click 'Allow' 400 times - surely it's better than default Apple method of typing credentials.

Appreciate some help please.

@rainbowdash12345
Copy link

rainbowdash12345 commented Nov 11, 2016

Thanks for this project!
I had to make one small mod to the Apple Script to get this beast to run on my computer (running MacOS 10.12.1).
Change: removed "of group 1" from the Apple Script.
Also, working in MS Excel, I was able to quickly find any passwords containing commas by looking for rows that did not contain a time stamp in column E.

@jclark5093
Copy link

Having the same problem as David above, iCloud.keychain (where all the useful stuff is) dumps an empty file.

Also, the login.keychain creates a massive file for me (good), but when I run the ruby script, it only gives me a csv with one entry line (correctly formatted login and password for something, but it's the very last one in my keychain, nothing before it gets processed. Odd, because I would expect it to get to a certain one and then break, but to skip all of them and only process the final one? Seems odd... Any alternatives known for this?

btw, it has an @ symbol instead of a pencil ... symbol as the "type" so maybe that's why it worked? Landry314 mentioned this above as well...

El Capitan 10.11.6

@prescod
Copy link

prescod commented May 1, 2017

Well the good news is that you can get to the System keychain like this:

security dump-keychain -d /Library/Keychains/System.keychain

The bad news is that you need to type an administrator's User Name for every password. Not sure if that's possible to script away or not.

@tiktuk
Copy link

tiktuk commented Mar 30, 2019

The apple script did not work for me on Mojave (10.14.3) but I found a version in the mrc-converter-suite here that did the job.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment