-
-
Save sahib/3a2d7951aec59ffd23f3d1eef60cc450 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0x0 | |
[ 0.000000] Linux version 4.19.50-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #896 SMP Thu Jun 20 16:11:44 BST 2019 | |
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d | |
[ 0.000000] CPU: div instructions available: patching division code | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Compute Module 3 Rev 1.0 | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 | |
[ 0.000000] On node 0 totalpages: 242688 | |
[ 0.000000] Normal zone: 2133 pages used for memmap | |
[ 0.000000] Normal zone: 0 pages reserved | |
[ 0.000000] Normal zone: 242688 pages, LIFO batch:63 | |
[ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 | |
[ 0.000000] percpu: Embedded 17 pages/cpu s39488 r8192 d21952 u69632 | |
[ 0.000000] pcpu-alloc: s39488 r8192 d21952 u69632 alloc=17*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 | |
[ 0.000000] Kernel command line: coherent_pool=1M bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:73:F9:6C vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=aa12f64d-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait ipv6.disable=1 | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Memory: 939092K/970752K available (8192K kernel code, 629K rwdata, 2176K rodata, 1024K init, 821K bss, 23468K reserved, 8192K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xbb800000 - 0xff800000 (1088 MB) | |
lowmem : 0x80000000 - 0xbb400000 ( 948 MB) | |
modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
.text : 0x(ptrval) - 0x(ptrval) (9184 kB) | |
.init : 0x(ptrval) - 0x(ptrval) (1024 kB) | |
.data : 0x(ptrval) - 0x(ptrval) ( 630 kB) | |
.bss : 0x(ptrval) - 0x(ptrval) ( 822 kB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] ftrace: allocating 26404 entries in 78 pages | |
[ 0.000000] rcu: Hierarchical RCU implementation. | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). | |
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
[ 0.000023] Switching to timer-based delay loop, resolution 52ns | |
[ 0.000286] Console: colour dummy device 80x30 | |
[ 0.000913] console [tty1] enabled | |
[ 0.000968] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
[ 0.001014] pid_max: default: 32768 minimum: 301 | |
[ 0.001372] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.001408] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.002344] CPU: Testing write buffer coherency: ok | |
[ 0.002820] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 | |
[ 0.003488] Setting up static identity map for 0x100000 - 0x10003c | |
[ 0.003657] rcu: Hierarchical SRCU implementation. | |
[ 0.004472] smp: Bringing up secondary CPUs ... | |
[ 0.005340] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 | |
[ 0.006271] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 | |
[ 0.007131] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 | |
[ 0.007251] smp: Brought up 1 node, 4 CPUs | |
[ 0.007335] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
[ 0.007359] CPU: All CPU(s) started in HYP mode. | |
[ 0.007380] CPU: Virtualization extensions available. | |
[ 0.008366] devtmpfs: initialized | |
[ 0.021008] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 | |
[ 0.021282] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.021331] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
[ 0.021937] pinctrl core: initialized pinctrl subsystem | |
[ 0.022837] NET: Registered protocol family 16 | |
[ 0.025843] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
[ 0.031575] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
[ 0.031612] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
[ 0.031845] Serial: AMBA PL011 UART driver | |
[ 0.034141] bcm2835-mbox 3f00b880.mailbox: mailbox enabled | |
[ 0.068923] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 | |
[ 0.070810] SCSI subsystem initialized | |
[ 0.071049] usbcore: registered new interface driver usbfs | |
[ 0.071126] usbcore: registered new interface driver hub | |
[ 0.071246] usbcore: registered new device driver usb | |
[ 0.090298] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-06-20 16:12, variant start | |
[ 0.100133] raspberrypi-firmware soc:firmware: Firmware hash is a59fb7a74180be0111dbc5c18a37ec6df86f14a3 | |
[ 0.111838] clocksource: Switched to clocksource arch_sys_counter | |
[ 0.201272] VFS: Disk quotas dquot_6.6.0 | |
[ 0.201384] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 0.201562] FS-Cache: Loaded | |
[ 0.201788] CacheFiles: Loaded | |
[ 0.211877] NET: Registered protocol family 2 | |
[ 0.212670] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) | |
[ 0.212734] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 0.212865] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 0.213070] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.213225] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.213291] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 0.213622] NET: Registered protocol family 1 | |
[ 0.214199] RPC: Registered named UNIX socket transport module. | |
[ 0.214226] RPC: Registered udp transport module. | |
[ 0.214248] RPC: Registered tcp transport module. | |
[ 0.214270] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.216005] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available | |
[ 0.219029] Initialise system trusted keyrings | |
[ 0.219235] workingset: timestamp_bits=14 max_order=18 bucket_order=4 | |
[ 0.228991] FS-Cache: Netfs 'nfs' registered for caching | |
[ 0.229584] NFS: Registering the id_resolver key type | |
[ 0.229628] Key type id_resolver registered | |
[ 0.229650] Key type id_legacy registered | |
[ 0.229682] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.232020] Key type asymmetric registered | |
[ 0.232051] Asymmetric key parser 'x509' registered | |
[ 0.232119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) | |
[ 0.232298] io scheduler noop registered | |
[ 0.232323] io scheduler deadline registered (default) | |
[ 0.232528] io scheduler cfq registered | |
[ 0.232552] io scheduler mq-deadline registered (default) | |
[ 0.232576] io scheduler kyber registered | |
[ 0.235697] bcm2708_fb soc:fb: FB found 1 display(s) | |
[ 0.236046] cma: cma_alloc: alloc failed, req-size: 2025 pages, ret: -12 | |
[ 0.294275] Console: switching to colour frame buffer device 240x67 | |
[ 0.327717] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080 | |
[ 0.330120] bcm2835-rng 3f104000.rng: hwrng registered | |
[ 0.330571] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) | |
[ 0.331344] vc-sm: Videocore shared memory driver | |
[ 0.331793] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 | |
[ 0.343071] brd: module loaded | |
[ 0.353665] loop: module loaded | |
[ 0.354445] Loading iSCSI transport class v2.0-870. | |
[ 0.355291] libphy: Fixed MDIO Bus: probed | |
[ 0.355527] usbcore: registered new interface driver lan78xx | |
[ 0.355751] usbcore: registered new interface driver smsc95xx | |
[ 0.355935] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
[ 0.383982] dwc_otg 3f980000.usb: base=(ptrval) | |
[ 0.584362] Core Release: 2.80a | |
[ 0.584473] Setting default values for core params | |
[ 0.584645] Finished setting default values for core params | |
[ 0.785126] Using Buffer DMA mode | |
[ 0.785237] Periodic Transfer Interrupt Enhancement - disabled | |
[ 0.785410] Multiprocessor Interrupt Enhancement - disabled | |
[ 0.785576] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
[ 0.785718] Dedicated Tx FIFOs mode | |
[ 0.786309] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = bad04000 dma = 0xfad04000 len=9024 | |
[ 0.786608] FIQ FSM acceleration enabled for : | |
Non-periodic Split Transactions | |
Periodic Split Transactions | |
High-Speed Isochronous Endpoints | |
Interrupt/Control Split Transaction hack enabled | |
[ 0.787220] dwc_otg: Microframe scheduler enabled | |
[ 0.787278] WARN::hcd_init_fiq:457: FIQ on core 1 | |
[ 0.787431] WARN::hcd_init_fiq:458: FIQ ASM at 80650b44 length 36 | |
[ 0.787616] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 | |
[ 0.787801] dwc_otg 3f980000.usb: DWC OTG Controller | |
[ 0.787984] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 | |
[ 0.795854] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 | |
[ 0.803604] Init: Port Power? op_state=1 | |
[ 0.811249] Init: Power Port (0) | |
[ 0.819082] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 | |
[ 0.826855] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 0.834606] usb usb1: Product: DWC OTG Controller | |
[ 0.842362] usb usb1: Manufacturer: Linux 4.19.50-v7+ dwc_otg_hcd | |
[ 0.850212] usb usb1: SerialNumber: 3f980000.usb | |
[ 0.858735] hub 1-0:1.0: USB hub found | |
[ 0.866544] hub 1-0:1.0: 1 port detected | |
[ 0.874812] dwc_otg: FIQ enabled | |
[ 0.874818] dwc_otg: NAK holdoff enabled | |
[ 0.874824] dwc_otg: FIQ split-transaction FSM enabled | |
[ 0.874834] Module dwc_common_port init | |
[ 0.875125] usbcore: registered new interface driver usb-storage | |
[ 0.883044] mousedev: PS/2 mouse device common for all mice | |
[ 0.891651] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer | |
[ 0.899606] bcm2835-cpufreq: min=600000 max=1200000 | |
[ 0.907783] sdhci: Secure Digital Host Controller Interface driver | |
[ 0.915538] sdhci: Copyright(c) Pierre Ossman | |
[ 0.923754] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe | |
[ 0.931726] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 0.940070] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 0.948004] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 0.956027] usbcore: registered new interface driver usbhid | |
[ 0.963788] usbhid: USB HID core driver | |
[ 0.972402] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 | |
[ 0.982023] [vc_sm_connected_init]: start | |
[ 0.993042] [vc_sm_connected_init]: end - returning 0 | |
[ 1.001813] bcm2835_vc_sm_cma_probe: Videocore shared memory driver | |
[ 1.009824] [vc_sm_connected_init]: start | |
[ 1.018139] [vc_sm_connected_init]: installed successfully | |
[ 1.026479] Initializing XFRM netlink socket | |
[ 1.034358] NET: Registered protocol family 17 | |
[ 1.042287] Key type dns_resolver registered | |
[ 1.050494] Registering SWP/SWPB emulation handler | |
[ 1.058835] registered taskstats version 1 | |
[ 1.066396] Loading compiled-in X.509 certificates | |
[ 1.081183] uart-pl011 3f201000.serial: cts_event_workaround enabled | |
[ 1.088939] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 81, base_baud = 0) is a PL011 rev2 | |
[ 2.107145] console [ttyAMA0] enabled | |
[ 2.120638] sdhost: log_buf @ (ptrval) (fad07000) | |
[ 2.133372] Indeed it is in host mode hprt0 = 00021501 | |
[ 2.234346] random: fast init done | |
[ 2.258022] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) | |
[ 2.272668] of_cfs_init | |
[ 2.283063] of_cfs_init: OK | |
[ 2.294272] Waiting for root device PARTUUID=aa12f64d-02... | |
[ 2.359188] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ 2.375110] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
[ 2.389957] Indeed it is in host mode hprt0 = 00001101 | |
[ 2.463756] mmc0: new high speed SDHC card at address aaaa | |
[ 2.478400] mmcblk0: mmc0:aaaa SC16G 14.8 GiB | |
[ 2.496012] mmcblk0: p1 p2 | |
[ 2.516165] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem | |
[ 2.531549] EXT4-fs (mmcblk0p2): write access will be enabled during recovery | |
[ 2.644304] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=92.24 | |
[ 2.660599] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 2.675831] usb 1-1: Product: USB2.0 Hub | |
[ 2.687949] usb 1-1: Manufacturer: GenesysLogic | |
[ 2.701528] hub 1-1:1.0: USB hub found | |
[ 2.713673] hub 1-1:1.0: 4 ports detected | |
[ 2.760565] EXT4-fs (mmcblk0p2): recovery complete | |
[ 2.777671] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
[ 2.793878] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. | |
[ 2.818930] devtmpfs: mounted | |
[ 2.835481] Freeing unused kernel memory: 1024K | |
[ 2.848532] Run /sbin/init as init process | |
[ 3.041908] usb 1-1.1: new high-speed USB device number 3 using dwc_otg | |
[ 3.187793] usb 1-1.1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00 | |
[ 3.204508] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 3.220138] usb 1-1.1: Product: AX88179 | |
[ 3.232134] usb 1-1.1: Manufacturer: ASIX Elec. Corp. | |
[ 3.245425] usb 1-1.1: SerialNumber: 0000000000150F | |
[ 3.361895] usb 1-1.2: new low-speed USB device number 4 using dwc_otg | |
[ 3.429045] systemd[1]: System time before build time, advancing clock. | |
[ 3.527785] usb 1-1.2: New USB device found, idVendor=0bf8, idProduct=101e, bcdDevice= 1.09 | |
[ 3.544632] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
[ 3.560226] usb 1-1.2: Product: Fujitsu Keyboard | |
[ 3.573223] usb 1-1.2: Manufacturer: Fujitsu | |
[ 3.580300] IPv6: Loaded, but administratively disabled, reboot required to enable | |
[ 3.614969] input: Fujitsu Fujitsu Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0BF8:101E.0001/input/input0 | |
[ 3.647896] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
[ 3.688311] systemd[1]: Detected architecture arm. | |
[ 3.702532] hid-generic 0003:0BF8:101E.0001: input,hidraw0: USB HID v1.10 Keyboard [Fujitsu Fujitsu Keyboard] on usb-3f980000.usb-1.2/input0 | |
[ 3.750347] input: Fujitsu Fujitsu Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:0BF8:101E.0002/input/input1 | |
[ 3.800109] systemd[1]: Set hostname to <raspberrypi>. | |
[ 3.812134] input: Fujitsu Fujitsu Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:0BF8:101E.0002/input/input2 | |
[ 3.839894] hid-generic 0003:0BF8:101E.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [Fujitsu Fujitsu Keyboard] on usb-3f980000.usb-1.2/input1 | |
[ 4.013310] uart-pl011 3f201000.serial: no DMA platform data | |
[ 4.182883] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling. | |
[ 4.211084] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.) | |
[ 4.703484] random: systemd: uninitialized urandom read (16 bytes read) | |
[ 4.733762] random: systemd: uninitialized urandom read (16 bytes read) | |
[ 4.752623] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ 4.786912] random: systemd: uninitialized urandom read (16 bytes read) | |
[ 4.810407] systemd[1]: Created slice system-systemd\x2dfsck.slice. | |
[ 4.841527] systemd[1]: Reached target Swap. | |
[ 4.900881] systemd[1]: Condition check resulted in Journal Audit Socket being skipped. | |
[ 4.921175] systemd[1]: Listening on initctl Compatibility Named Pipe. | |
[ 6.057273] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
[ 6.171229] systemd-journald[113]: Received request to flush runtime journal from PID 1 | |
[ 6.874317] media: Linux media interface: v0.10 | |
[ 6.928405] videodev: Linux video capture interface: v2.00 | |
[ 6.987489] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. | |
[ 6.999027] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. | |
[ 7.009258] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. | |
[ 7.029945] bcm2835_audio soc:audio: card created with 8 channels | |
[ 7.046858] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. | |
[ 7.069279] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 | |
[ 7.069296] bcm2835-codec bcm2835-codec: Loaded V4L2 decode | |
[ 7.083064] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 | |
[ 7.083080] bcm2835-codec bcm2835-codec: Loaded V4L2 encode | |
[ 7.099282] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 | |
[ 7.099301] bcm2835-codec bcm2835-codec: Loaded V4L2 isp | |
[ 7.826126] ax88179_178a 1-1.1:1.0 eth0: register 'ax88179_178a' at usb-3f980000.usb-1.1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:0e:c6:b1:f4:08 | |
[ 7.827302] usbcore: registered new interface driver ax88179_178a | |
[ 9.282682] 8021q: 802.1Q VLAN Support v1.8 | |
[ 9.358072] random: crng init done | |
[ 9.358112] random: 7 urandom warning(s) missed due to ratelimiting | |
[ 9.466132] cfg80211: Loading compiled-in X.509 certificates for regulatory database | |
[ 9.574120] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' | |
[ 9.790637] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS | |
[ 13.239388] ax88179_178a 1-1.1:1.0 eth0: ax88179 - Link status is: 1 | |
[ 26.791894] usb 1-1.4: new high-speed USB device number 5 using dwc_otg | |
[ 26.933956] usb 1-1.4: New USB device found, idVendor=1bc7, idProduct=1201, bcdDevice= 3.18 | |
[ 26.933971] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ 26.933981] usb 1-1.4: Product: LE910C1-EU | |
[ 26.933991] usb 1-1.4: Manufacturer: Android | |
[ 26.934001] usb 1-1.4: SerialNumber: 0123456789ABCDEF | |
[ 27.035072] usbcore: registered new interface driver cdc_wdm | |
[ 27.039770] usbcore: registered new interface driver usbserial_generic | |
[ 27.039835] usbserial: USB Serial support registered for generic | |
[ 27.044208] qmi_wwan 1-1.4:1.2: cdc-wdm0: USB WDM device | |
[ 27.045475] qmi_wwan 1-1.4:1.2 wwan0: register 'qmi_wwan' at usb-3f980000.usb-1.4, WWAN/QMI device, 16:ea:74:08:a0:1c | |
[ 27.045671] usbcore: registered new interface driver qmi_wwan | |
[ 27.056537] usbcore: registered new interface driver option | |
[ 27.056582] usbserial: USB Serial support registered for GSM modem (1-port) | |
[ 27.056969] option 1-1.4:1.0: GSM modem (1-port) converter detected | |
[ 27.057292] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB0 | |
[ 27.057638] option 1-1.4:1.3: GSM modem (1-port) converter detected | |
[ 27.057830] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB1 | |
[ 27.058045] option 1-1.4:1.4: GSM modem (1-port) converter detected | |
[ 27.058379] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB2 | |
[ 27.058583] option 1-1.4:1.5: GSM modem (1-port) converter detected | |
[ 27.058849] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB3 | |
[ 27.059051] option 1-1.4:1.6: GSM modem (1-port) converter detected | |
[ 27.059227] usb 1-1.4: GSM modem (1-port) converter now attached to ttyUSB4 | |
[ 59.198335] qmi_wwan 1-1.4:1.2 wwan0: Cannot change a running device |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 | |
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 | |
inet 127.0.0.1/8 scope host lo | |
valid_lft forever preferred_lft forever | |
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 | |
link/ether 00:0e:c6:b1:f4:08 brd ff:ff:ff:ff:ff:ff | |
inet 192.168.168.194/24 brd 192.168.168.255 scope global noprefixroute eth0 | |
valid_lft forever preferred_lft forever | |
3: wwan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 | |
link/ether 16:ea:74:08:a0:1c brd ff:ff:ff:ff:ff:ff | |
inet 100.65.15.241/30 brd 100.65.15.243 scope global noprefixroute wwan0 | |
valid_lft forever preferred_lft forever |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Module Size Used by | |
option 45056 2 | |
usb_wwan 20480 1 option | |
qmi_wwan 28672 0 | |
usbserial 40960 6 option,usb_wwan | |
cdc_wdm 20480 2 qmi_wwan | |
sha256_generic 20480 0 | |
cfg80211 614400 0 | |
rfkill 28672 2 cfg80211 | |
8021q 32768 0 | |
garp 16384 1 8021q | |
stp 16384 1 garp | |
llc 16384 2 garp,stp | |
ax88179_178a 24576 0 | |
evdev 24576 5 | |
raspberrypi_hwmon 16384 0 | |
bcm2835_codec 36864 0 | |
hwmon 16384 1 raspberrypi_hwmon | |
v4l2_mem2mem 24576 1 bcm2835_codec | |
snd_bcm2835 24576 1 | |
bcm2835_v4l2 45056 0 | |
snd_pcm 102400 1 snd_bcm2835 | |
videobuf2_dma_contig 20480 1 bcm2835_codec | |
bcm2835_mmal_vchiq 32768 2 bcm2835_codec,bcm2835_v4l2 | |
v4l2_common 16384 1 bcm2835_v4l2 | |
snd_timer 32768 1 snd_pcm | |
videobuf2_vmalloc 16384 1 bcm2835_v4l2 | |
videobuf2_memops 16384 2 videobuf2_dma_contig,videobuf2_vmalloc | |
snd 73728 5 snd_timer,snd_bcm2835,snd_pcm | |
videobuf2_v4l2 24576 3 bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem | |
videobuf2_common 45056 4 bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2 | |
videodev 200704 6 bcm2835_codec,v4l2_common,videobuf2_common,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2 | |
media 36864 2 videodev,v4l2_mem2mem | |
uio_pdrv_genirq 16384 0 | |
fixed 16384 0 | |
uio 20480 1 uio_pdrv_genirq | |
ip_tables 24576 0 | |
x_tables 32768 1 ip_tables | |
ipv6 450560 0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Bus 001 Device 005: ID 1bc7:1201 Telit Wireless Solutions |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
-------------------------------- | |
General | dbus path: /org/freedesktop/ModemManager1/Bearer/0 | |
| type: default | |
-------------------------------- | |
Status | connected: yes | |
| suspended: no | |
| interface: wwan0 | |
| ip timeout: 20 | |
-------------------------------- | |
Properties | apn: bicsapn | |
| roaming: allowed | |
| ip type: ipv4 | |
-------------------------------- | |
IPv4 configuration | method: static | |
| address: 100.65.15.241 | |
| prefix: 30 | |
| gateway: 100.65.15.242 | |
| dns: 8.8.8.8, 8.8.4.4 | |
| mtu: 1430 | |
-------------------------------- | |
Statistics | duration: 150 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
----------------------- | |
General | dbus path: /org/freedesktop/ModemManager1/SIM/0 | |
----------------------- | |
Properties | imsi: 206018851912415 | |
| iccid: 89320420000000124154 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
-------------------------------- | |
General | dbus path: /org/freedesktop/ModemManager1/Modem/0 | |
| device id: 0c28128ac36d910faa5bbab8302d8f8d565a21ee | |
-------------------------------- | |
Hardware | manufacturer: QUALCOMM INCORPORATED | |
| model: LE910C1-EU | |
| revision: 25.20.223 1 [Dec 11 2018 23:00:00] | |
| h/w revision: 10000 | |
| supported: gsm-umts, lte | |
| current: gsm-umts, lte | |
| equipment id: 355001092001766 | |
-------------------------------- | |
System | device: /sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4 | |
| drivers: option1, qmi_wwan | |
| plugin: Telit | |
| primary port: cdc-wdm0 | |
| ports: ttyUSB2 (at), cdc-wdm0 (qmi), wwan0 (net), ttyUSB3 (at) | |
-------------------------------- | |
Status | lock: sim-pin2 | |
| unlock retries: sim-pin (3), sim-pin2 (3), sim-puk (10), sim-puk2 (10) | |
| state: connected | |
| power state: on | |
| access tech: lte | |
| signal quality: 100% (recent) | |
-------------------------------- | |
Modes | supported: allowed: 2g; preferred: none | |
| allowed: 3g; preferred: none | |
| allowed: 4g; preferred: none | |
| allowed: 2g, 3g; preferred: 3g | |
| allowed: 2g, 3g; preferred: 2g | |
| allowed: 2g, 4g; preferred: 4g | |
| allowed: 2g, 4g; preferred: 2g | |
| allowed: 3g, 4g; preferred: 3g | |
| allowed: 3g, 4g; preferred: 4g | |
| allowed: 2g, 3g, 4g; preferred: 4g | |
| allowed: 2g, 3g, 4g; preferred: 3g | |
| allowed: 2g, 3g, 4g; preferred: 2g | |
| current: allowed: 2g, 3g, 4g; preferred: 4g | |
-------------------------------- | |
Bands | supported: egsm, dcs, utran-1, utran-3, utran-8, eutran-1, eutran-3, | |
| eutran-7, eutran-8, eutran-20, eutran-28 | |
| current: egsm, dcs, utran-1, utran-3, utran-8, eutran-1, eutran-3, | |
| eutran-7, eutran-8, eutran-20, eutran-28 | |
-------------------------------- | |
IP | supported: ipv4, ipv6, ipv4v6 | |
-------------------------------- | |
3GPP | imei: 355001092001766 | |
| operator id: 26201 | |
| operator name: TDG | |
| registration: home | |
-------------------------------- | |
3GPP EPS | ue mode of operation: csps-1 | |
-------------------------------- | |
SIM | dbus path: /org/freedesktop/ModemManager1/SIM/0 | |
-------------------------------- | |
Bearer | dbus path: /org/freedesktop/ModemManager1/Bearer/0 |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ cat /etc/NetworkManager/system-connections/telit.nmconnection | |
[connection] | |
id=telit | |
uuid=ae567462-9828-4758-bf83-82c27a8962d3 | |
type=gsm | |
interface-name=cdc-wdm0 | |
permissions= | |
[gsm] | |
apn=bicsapn | |
number=*99# | |
[ipv4] | |
dns-search= | |
method=auto | |
[ipv6] | |
addr-gen-mode=stable-privacy | |
dns-search= | |
method=auto |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
nmcli device show | |
GENERAL.DEVICE: cdc-wdm0 | |
GENERAL.TYPE: gsm | |
GENERAL.HWADDR: (unknown) | |
GENERAL.MTU: 1500 | |
GENERAL.STATE: 100 (connected) | |
GENERAL.CONNECTION: telit | |
GENERAL.CON-PATH: /org/freedesktop/NetworkManager/ActiveConnection/1 | |
IP4.ADDRESS[1]: 100.65.15.241/30 | |
IP4.GATEWAY: 100.65.15.242 | |
IP4.ROUTE[1]: dst = 100.65.15.240/30, nh = 0.0.0.0, mt = 203 | |
IP4.ROUTE[2]: dst = 100.65.15.240/30, nh = 0.0.0.0, mt = 700 | |
IP4.ROUTE[3]: dst = 0.0.0.0/0, nh = 100.65.15.242, mt = 700 | |
IP4.DNS[1]: 8.8.8.8 | |
IP4.DNS[2]: 8.8.4.4 | |
GENERAL.DEVICE: eth0 | |
GENERAL.TYPE: ethernet | |
GENERAL.HWADDR: 00:0E:C6:B1:F4:08 | |
GENERAL.MTU: 1500 | |
GENERAL.STATE: 10 (unmanaged) | |
GENERAL.CONNECTION: -- | |
GENERAL.CON-PATH: -- | |
WIRED-PROPERTIES.CARRIER: on | |
IP4.ADDRESS[1]: 192.168.168.194/24 | |
IP4.GATEWAY: 192.168.168.1 | |
IP4.ROUTE[1]: dst = 0.0.0.0/0, nh = 192.168.168.1, mt = 202 | |
IP4.ROUTE[2]: dst = 192.168.168.0/24, nh = 0.0.0.0, mt = 202 | |
IP6.GATEWAY: -- | |
GENERAL.DEVICE: lo | |
GENERAL.TYPE: loopback | |
GENERAL.HWADDR: 00:00:00:00:00:00 | |
GENERAL.MTU: 65536 | |
GENERAL.STATE: 10 (unmanaged) | |
GENERAL.CONNECTION: -- | |
GENERAL.CON-PATH: -- | |
IP4.ADDRESS[1]: 127.0.0.1/8 | |
IP4.GATEWAY: -- | |
IP6.GATEWAY: |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
$ uname -a | |
Linux raspberrypi 4.19.50-v7+ #896 SMP Thu Jun 20 16:11:44 BST 2019 armv7l GNU/Linux | |
$ mmcli --version | |
mmcli 1.10.0 | |
$ nmcli --version | |
nmcli tool, version 1.14.6 | |
$ qmicli --version | |
qmicli 1.22.0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment