sandyjmacdonald

# Pop this on another machine, and run with:
# python3 github-graph-api.py --host 0.0.0.0
#
# Take note of this machine's IP address, as you'll
# need to add it in the GU code.

import requests
from bs4 import BeautifulSoup, SoupStrainer
from flask import Flask, jsonify, make_response

sandyjmacdonald

SSID = ""
PSK = ""

sandyjmacdonald

# CircuitPython USB MIDI to serial MIDI converter for Raspberry Pi Pico (RP2040).

# IMPORTANT! Should *only be used for MIDI in*, i.e. from USB devices to hardware
# MIDI synths, and *not* in the opposite direction. Doing so could risk damage to
# the microcontroller, your computer, or both.

# Wire a 10Ω resistor from the Tx pin on the Raspberry Pi Pico or other 
# RP2040 board to the 3.5mm stereo jack tip, a 33Ω resistor from the 3v3 pin on
# the Raspberry Pi Pico to the 3.5mm stereo jack ring, and the ground pin on the
# Raspberry Pi Pico to the 3.5mm stereo jack sleeve.

sandyjmacdonald

# This example lights the RGB LED on Tiny 2040 to a different colour 
# for each note in the octave. Listens on all MIDI channels by default.

import board
import adafruit_rgbled

import usb_midi
import adafruit_midi

from adafruit_midi.note_on import NoteOn

sandyjmacdonald

import time
import board

import usb_midi
import adafruit_midi

from analogio import AnalogIn
from adafruit_midi.control_change import ControlChange

# MIDI CC knob controller example for Raspberry Pi Pico

sandyjmacdonald

import time
import board
import busio
import usb_hid

from adafruit_bus_device.i2c_device import I2CDevice
import adafruit_dotstar

from adafruit_hid.keyboard import Keyboard
from adafruit_hid.keyboard_layout_us import KeyboardLayoutUS

sandyjmacdonald

import time
import board
import busio
import usb_midi

import adafruit_midi
from adafruit_midi.note_off import NoteOff
from adafruit_midi.note_on import NoteOn
from adafruit_bus_device.i2c_device import I2CDevice
import adafruit_dotstar

sandyjmacdonald

// USB MIDI CC controller with Trinket M0 and Pimoroni Potentiometer Breakout.
// Adapted from Chris Parrot's Potentiometer example.

#include <IOExpander.h>
#include <Adafruit_DotStar.h>
#include <MIDIUSB.h>

// Global constants
static const unsigned int DELAY_MS = 1000 / 30;

sandyjmacdonald

#!/bin/bash

DATESTAMP=`date "+%Y-%m-%d-%H-%M-%S"`
MOPIDY_CONFIG="/etc/mopidy/mopidy.conf"
MOPIDY_SUDOERS="/etc/sudoers.d/010_mopidy-nopasswd"
EXISTING_CONFIG=false
PYTHON_MAJOR_VERSION=3
PIP_BIN=pip3

function add_to_config_text {

sandyjmacdonald

1. Clone the Pirate Audio GitHub repo and install:

git clone https://github.com/pimoroni/pirate-audio
cd pirate-audio/mopidy
sudo ./install.sh

Detailed Pirate Audio installation instructions can be found here.