Skip to content

Instantly share code, notes, and snippets.

What would you like to do?
Arduino Server for JSON-P pin values
Web Server returning data as JSON-P, adapted from
A simple web server that returns the value of the analog input pins as
a JSON-P object, using an Arduino Wiznet Ethernet shield.
* Ethernet shield attached to pins 10, 11, 12, 13 (standard configuration)
* Analog inputs attached to pins A0 through A5 (optional)
* Example of reading LM35 on pin A0:
LM35 pins: {1: 5V, 2: A0, 3: gnd}
created 18 Dec 2009
by David A. Mellis
modified 19 Mar 2012
by Sam Fentress
#include <SPI.h>
#include <Ethernet.h>
// Enter a MAC address and IP address for your controller below.
// The IP address will be dependent on your local network:
byte mac[] = { 0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0xED };
IPAddress ip(169,254,1,1);
char callback[27] = "arduinoEthernetComCallback";
// Initialize the Ethernet server library
// with the IP address and port you want to use
// (port 80 is default for HTTP):
EthernetServer server(80);
void setup()
// start the Ethernet connection and the server:
Ethernet.begin(mac, ip);
void loop()
// listen for incoming clients
EthernetClient client = server.available();
if (client) {
// an http request ends with a blank line
boolean currentLineIsBlank = true;
while (client.connected()) {
if (client.available()) {
char c =;
// if you've gotten to the end of the line (received a newline
// character) and the line is blank, the http request has ended,
// so you can send a reply
if (c == '\n' && currentLineIsBlank) {
// send a standard http response header
client.println("HTTP/1.1 200 OK");
client.println("Content-Type: application/json");
// output the value of each analog input pin as a json-p object
for (int analogChannel = 0; analogChannel < 6; analogChannel++) {
client.print("\": ");
if (analogChannel != 5) {
if (c == '\n') {
// you're starting a new line
currentLineIsBlank = true;
else if (c != '\r') {
// you've gotten a character on the current line
currentLineIsBlank = false;
// give the web browser time to receive the data
// close the connection:
Copy link

Is it possible to modify this and use it without an Ethernet Shield? I have a Bluetooth shield but I doubt that would be helpful

Copy link

gachet commented Feb 9, 2017

great example. It is possible some help for doing the same with YUN?

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment