Skip to content

Instantly share code, notes, and snippets.

@skygunner
Last active March 7, 2018 12:29
Show Gist options
  • Save skygunner/2a709e4836d4cd601e9ae646edcc5098 to your computer and use it in GitHub Desktop.
Save skygunner/2a709e4836d4cd601e9ae646edcc5098 to your computer and use it in GitHub Desktop.
D-Link DIR-865L Router Notes/flashing/CFE Mini/Reset Factory defaults
Dlink DIR-865L Router
Reset to factory default settings:
While is the router is powered on and running,
push a pin into the reset hole behind the router and keep pressing it for about 6 seconds, the LED turns off;
release the reset button and the router shall resetted.
Recovery/Upgrade:
1. Switch off the router
2. Push a pin into the reset hole behind the router (above the power switch), hold it in there and power on the router,
the LED turns orange and the router is now in recovery/rescue mode (Mini CFE http page)
3. Configure you pc's ip to be 192.168.0.2 mask 255.255.255.0 (or any 192.168.0.x)
4. Access router's webpage at 192.168.0.1, and upload the downloaded firmware
5. Wait for router to reboot
6. For Tomato firmware Default router address is at 192.168.1.1, username: root or admin, password: admin
Compaible firmeware:
Tomato Shibby 131
[V05] https://www.dropbox.com/s/gcik5qw1a19ibdy/tomato-dir865l_V05-shibby131-no_nginx-AIO.trx?dl=0
MultiWan
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment