zenxedo

Install Proxmox and a RancherOS VM with Portainer to manage docker containers

WARNING MAY BE INCORRECT AND INCOMPLETE, USE AT YOUR OWN RISK

I have tried this setup and although it works and may be good for ceratin circumstances I would advise using ubuntu as the base with docker, docker-compose, and portainer. https://gist.github.com/mow4cash/626275e095f7f90898944a85d66b3be6

Link to my docker run file https://gist.github.com/mow4cash/6a25343cdeb0cd115f263dea0a3b623d

saghul

const puppeteer = require('puppeteer');


// Streams the first webcam in the system to the specified Jitsi Meet room. Audio is currently
// not sent, but it can be easily enabled by disabling the corresponding setting in `meetArgs`.
//
// TODO
//   - Detect if we are kicked from the room
//   - Support authenticated deployments
//

yohangdev

# source: https://raymii.org/s/tutorials/Proxmox_VE_One_Public_IP.html

iface eth0 inet manual

iface eth1 inet manual

auto vmbr0
iface vmbr0 inet static
	address  163.172.103.199
	netmask  255.255.255.0

joeblau

Securely erase an external disk using dd on OSX

1. Plug in your SD card, HDD, or other block device and then use the following command to see which /dev/diskN node it's located on:

diskutil list

2. Unmount the disk where “N� is the number of the disk taken from the above command:

tmaiaroto

# Feel free to change this path of course (and keys_zone value as well, but also change the usage of it below).
proxy_cache_path /var/www/cache/resized levels=1:2 keys_zone=resizedimages:10m max_size=1G;

# Gzip was on in another conf file of mine...You may need to uncomment the next line.
#gzip on;
gzip_disable msie6;
gzip_static on;
gzip_comp_level 4;
gzip_proxied any;
# Again, be careful that you aren't overwriting some other setting from another config's http {} section.

shimofuri

Each existing unread and subsequent new emails after the script is started are 
passed as Mail objects to "process_email" function.Function header is provided
but processing implementation is left to the user. Error logs are currently sent
to a rotating log file (in the same directory as the script) and to STDOUT. 
Instead of polling or checking the server for new emails every now and then,
IMAP IDLE check is utilized.  Ensure that the IMAP server supports IDLE command
and allows at least 5 minutes of idling*** and uses the default ports for this 
script to work. Tested to work with Gmail and default installations of MS 
Exchange Server.