Cleanup host added as custom to Rancher 2.0

cleanup.sh

#!/bin/sh
# OUTDATED: please refer to the link below for the latest version:
# https://github.com/rancherlabs/support-tools/blob/master/extended-rancher-2-cleanup/extended-cleanup-rancher2.sh
docker rm -f $(docker ps -qa)
docker volume rm $(docker volume ls -q)
cleanupdirs="/var/lib/etcd /etc/kubernetes /etc/cni /opt/cni /var/lib/cni /var/run/calico /opt/rke"
for dir in $cleanupdirs; do
  echo "Removing $dir"
  rm -rf $dir
done

Is there a way to put all of these in a single place other than creating a link with ln -s?

This script delete Rancher2 nodes in a clean way and prepare a recycling / redeployment of nodes in a perfect manner. Little trick - great solution. Thank you.

(Typing some words about will give other users a chance to find this solution. Did it here for all of us ;-) ).

I'll keep it here for myself :)!
curl https://gist.githubusercontent.com/superseb/2cf186726807a012af59a027cb41270d/raw/eaa2d235e7693c2d1c5a2a916349410274bb95a9/cleanup.sh > ./cleanup.sh && chmod a+x ./cleanup.sh && sudo ./cleanup.sh

It works, thx. You are my hero!!

Thank you for this, much appreciated!

I made a slight adaptation of this script and called it clean_rancher.sh after forgetting to run it as sudo, so pasting here in case it helps anyone else...

#!/bin/bash
user=$EUID
if [ "${user}" != "0" ]; then
  echo
  echo "$0 must be run as root - you are running as $EUID"
  echo
  exit 1
fi
echo
echo "About to destroy Rancher 2.x install"
echo "5s to cancel with ^c"
echo
sleep 5

containers=$(docker ps -aq)
if [ "${containers}x" != "x" ]
then
  docker rm -f $(docker ps -qa)
else
  echo "No running containers - ignoring docker rm"
fi

volumes=$(docker volume ls -q)
if [ "${volumes}x" != "x" ]
then
  docker volume rm $(docker volume ls -q)
else
  echo "No volumes - ignoring docker volume rm"
fi

cleanupdirs="/var/lib/etcd /etc/kubernetes /etc/cni /opt/cni /var/lib/cni /var/run/calico /opt/rke"
for dir in $cleanupdirs; do
  echo "Removing $dir"
  rm -rf $dir
done

Then, chmod +x clean_rancher.sh

Hope this helps others and thanks again for the original script!

David

Thanks, saved me some trouble! 👍

awesome work！

this repo is a hidden gem

Is this command rm all container in docker (event it doesn't relate, and installed before Rancher cluster)?

Is this command rm all container in docker (event it doesn't relate, and installed before Rancher cluster)?

It will remove all running container on your machine (even it's not related to Rancher cluster)

I've changed the script to just remove rancher / k8s containers and images and use docker volume prune to cleanup volumes:

#!/bin/bash
user=$EUID
if [ "${user}" != "0" ]; then
  echo
  echo "$0 must be run as root - you are running as $EUID"
  echo
  exit 1
fi
echo
echo "About to destroy Rancher 2.x install"
echo "5s to cancel with ^c"
echo
sleep 5

containers=$(docker ps -a | grep -E "rancher|k8s" | awk '{print $1}')
if [ "${containers}x" != "x" ]
then
  docker rm -f $containers
else
  echo "No containers - ignoring docker rm"
fi

images=$(docker images -a | grep -E "rancher|k8s" | awk '{print $3}')
if [ "${images}x" != "x" ]
then
  docker rmi $images
else
  echo "No images - ignoring docker rmi"
fi

docker volume prune


cleanupdirs="/var/lib/etcd /etc/kubernetes /etc/cni /opt/cni /var/lib/cni /var/run/calico /opt/rke"
for dir in $cleanupdirs; do
  echo "Removing $dir"
  rm -rf $dir
done

When installing rancher-agent on the same host for testing purposes the cluster would not run properly until I also removed all data from /opt/rancher, perhaps it was only one of the three dirs:

root@rancher:~# ls /opt/rancher
certs-cache  k3s  management-state

Thanks !
ros should have a clean function. Or reinstall from cloud-config...

Will this unregister the node from the cluster too ?

saved me a bunch of time, tyvm!

Are you shure it's /var/run/calico and not /var/lib/calico?

@HoffmannP This gist is outdated, I updated the code with a link to the updated version.