Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Save takurx/fde81db1a354ca7f402fb5664f4c0125 to your computer and use it in GitHub Desktop.
Save takurx/fde81db1a354ca7f402fb5664f4c0125 to your computer and use it in GitHub Desktop.
log_dmesg_--reltime-1.txt
ubuntu@arm:~$ dmesg --reltime
[Jul 2 04:37] Booting Linux on physical CPU 0x0
[ +0.000000] Linux version 4.14.108-ti-r107 (root@w2-imx6q-wandboard-2gb) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04)) #1 SMP PREEMPT Wed Jun 12 05:51:34 UTC 2019
[ +0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ +0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ +0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ +0.000000] Memory policy: Data cache writeback
[ +0.000000] efi: Getting EFI parameters from FDT:
[ +0.000000] efi: UEFI not found.
[ +0.000000] cma: Reserved 48 MiB at 0x9c800000
[ +0.000000] On node 0 totalpages: 130560
[ +0.000000] free_area_init_node: node 0, pgdat c15dd380, node_mem_map df961000
[ +0.000000] Normal zone: 1148 pages used for memmap
[ +0.000000] Normal zone: 0 pages reserved
[ +0.000000] Normal zone: 130560 pages, LIFO batch:31
[ +0.000000] CPU: All CPU(s) started in SVC mode.
[ +0.000000] AM335X ES2.1 (sgx neon)
[ +0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0
[ +0.000000] percpu: Embedded 18 pages/cpu @df8e6000 s41548 r8192 d23988 u73728
[ +0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096
[ +0.000000] pcpu-alloc: [0] 0
[ +0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ +0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 cape_universal=enable quiet
[ +0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ +0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ +0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ +0.000000] Memory: 437476K/522240K available (13312K kernel code, 1084K rwdata, 4236K rodata, 1024K init, 361K bss, 35612K reserved, 49152K cma-reserved, 0K highmem)
[ +0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e00000 (14304 kB)
.init : 0xc1400000 - 0xc1500000 (1024 kB)
.data : 0xc1500000 - 0xc160f200 (1085 kB)
.bss : 0xc1619964 - 0xc1673e80 ( 362 kB)
[ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ +0.000000] ftrace: allocating 40946 entries in 121 pages
[ +0.000000] Preemptible hierarchical RCU implementation.
[ +0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ +0.000000] Tasks RCU enabled.
[ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ +0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ +0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ +0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ +0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ +0.000021] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ +0.000011] OMAP clocksource: timer1 at 24000000 Hz
[ +0.002200] timer_probe: no matching timers found
[ +0.000365] Console: colour dummy device 80x30
[ +0.000032] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ +0.000005] This ensures that you still see kernel messages. Please
[ +0.000005] update your kernel commandline.
[ +0.000027] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ +0.018298] pid_max: default: 32768 minimum: 301
[ +0.000271] Security Framework initialized
[ +0.000016] Yama: becoming mindful.
[ +0.000040] AppArmor: AppArmor disabled by boot time parameter
[ +0.000075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ +0.000013] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ +0.001047] CPU: Testing write buffer coherency: ok
[ +0.000067] CPU0: Spectre v2: using BPIALL workaround
[ +0.000466] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ +0.014096] Setting up static identity map for 0x80100000 - 0x80100060
[ +0.007908] Hierarchical SRCU implementation.
[ +0.011129] EFI services will not be available.
[ +0.004878] smp: Bringing up secondary CPUs ...
[ +0.000015] smp: Brought up 1 node, 1 CPU
[ +0.000011] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ +0.000007] CPU: All CPU(s) started in SVC mode.
[ +0.001683] devtmpfs: initialized
[ +0.038664] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ +0.000459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ +0.000025] futex hash table entries: 256 (order: 2, 16384 bytes)
[ +0.003940] xor: measuring software checksum speed
[ +0.039177] arm4regs : 1217.000 MB/sec
[ +0.039987] 8regs : 1091.000 MB/sec
[ +0.039999] 32regs : 1170.000 MB/sec
[ +0.040000] neon : 1673.000 MB/sec
[ +0.000007] xor: using function: neon (1673.000 MB/sec)
[ +0.000019] pinctrl core: initialized pinctrl subsystem
[ +0.001246] NET: Registered protocol family 16
[ +0.003957] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ +0.086844] omap_hwmod: debugss: _wait_target_disable failed
[ +0.040785] cpuidle: using governor menu
[ +0.007235] OMAP GPIO hardware version 0.1
[ +0.025912] No ATAGs?
[ +0.000021] hw-breakpoint: debug architecture 0x4 unsupported.
[ +0.001471] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ +0.000014] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ +0.024641] raid6: using algorithm neonx8 gen() 0 MB/s
[ +0.000013] raid6: .... xor() 0 MB/s, rmw enabled
[ +0.000008] raid6: using neon recovery algorithm
[ +0.007997] edma 49000000.edma: TI EDMA DMA engine driver
[ +0.007062] SCSI subsystem initialized
[ +0.000971] libata version 3.00 loaded.
[ +0.000282] usbcore: registered new interface driver usbfs
[ +0.000070] usbcore: registered new interface driver hub
[ +0.000119] usbcore: registered new device driver usb
[ +0.000910] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ +0.000980] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ +0.001323] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ +0.000489] media: Linux media interface: v0.10
[ +0.000066] Linux video capture interface: v2.00
[ +0.000172] pps_core: LinuxPPS API ver. 1 registered
[ +0.000007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0.000022] PTP clock support registered
[ +0.000666] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ +0.003002] FPGA manager framework
[ +0.000087] Advanced Linux Sound Architecture Driver Initialized.
[ +0.000650] NetLabel: Initializing
[ +0.000010] NetLabel: domain hash size = 128
[ +0.000006] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0.000080] NetLabel: unlabeled traffic allowed by default
[ +0.003404] clocksource: Switched to clocksource timer1
[ +0.141296] VFS: Disk quotas dquot_6.6.0
[ +0.000136] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ +0.012713] NET: Registered protocol family 2
[ +0.000904] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ +0.000048] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ +0.000058] TCP: Hash tables configured (established 4096 bind 4096)
[ +0.000118] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ +0.000023] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ +0.000217] NET: Registered protocol family 1
[ +0.009036] RPC: Registered named UNIX socket transport module.
[ +0.000012] RPC: Registered udp transport module.
[ +0.000005] RPC: Registered tcp transport module.
[ +0.000005] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ +0.000789] Unpacking initramfs...
[ +0.366706] random: fast init done
[ +0.042993] Freeing initrd memory: 7304K
[ +0.000652] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ +0.000415] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ +0.002070] audit: initializing netlink subsys (disabled)
[ +0.001244] audit: type=2000 audit(1.064:1): state=initialized audit_enabled=0 res=1
[ +0.000131] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ +0.006070] zbud: loaded
[ +0.007664] NFS: Registering the id_resolver key type
[ +0.000042] Key type id_resolver registered
[ +0.000006] Key type id_legacy registered
[ +0.000017] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ +0.000380] fuse init (API version 7.26)
[ +0.009823] Key type asymmetric registered
[ +0.000015] Asymmetric key parser 'x509' registered
[ +0.000126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ +0.004602] io scheduler noop registered
[ +0.000012] io scheduler deadline registered
[ +0.000297] io scheduler cfq registered (default)
[ +0.000010] io scheduler mq-deadline registered
[ +0.002316] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ +0.012535] gpio-of-helper ocp:cape-universal: ready
[ +0.011200] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ +0.002484] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ +0.003741] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250
[ +0.011852] console [ttyS0] enabled
[ +0.001160] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250
[ +0.001013] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250
[ +0.000964] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250
[ +0.001170] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250
[ +0.000972] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250
[ +0.003672] omap_rng 48310000.rng: Random Number Generator ver. 20
[ +0.001242] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[ +0.000110] usbcore: registered new interface driver udl
[ +0.005737] random: crng init done
[ +0.008568] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000288] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000258] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000218] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000538] eqep 48300180.eqep: ver. 1.0
[ +0.000189] eqep 48300180.eqep: count_mode:0
[ +0.000011] eqep 48300180.eqep: invert_qa:1
[ +0.000008] eqep 48300180.eqep: invert_qb:1
[ +0.000009] eqep 48300180.eqep: invert_qi:0
[ +0.000008] eqep 48300180.eqep: invert_qs:0
[ +0.000009] eqep 48300180.eqep: swap_inputs:0
[ +0.000008] eqep 48300180.eqep: QDECCTL:0x0180
[ +0.000009] eqep 48300180.eqep: QPOSINIT:0x00000000
[ +0.000007] eqep 48300180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48300180.eqep: QPOSCNT:0x00000000
[ +0.000009] eqep 48300180.eqep: omit_interrupt:0
[ +0.000007] eqep 48300180.eqep: QEINT:0x0800
[ +0.000007] eqep 48300180.eqep: QUPRD:0x05f5e100
[ +0.000008] eqep 48300180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48300180.eqep: QEPCTL:0x009e read
[ +0.000024] eqep 48300180.eqep: irq:145, clk_rate:100000000
[ +0.000242] eqep 48302180.eqep: ver. 1.0
[ +0.000130] eqep 48302180.eqep: count_mode:0
[ +0.000011] eqep 48302180.eqep: invert_qa:1
[ +0.000008] eqep 48302180.eqep: invert_qb:1
[ +0.000008] eqep 48302180.eqep: invert_qi:0
[ +0.000008] eqep 48302180.eqep: invert_qs:0
[ +0.000008] eqep 48302180.eqep: swap_inputs:0
[ +0.000007] eqep 48302180.eqep: QDECCTL:0x0180
[ +0.000008] eqep 48302180.eqep: QPOSINIT:0x00000000
[ +0.000008] eqep 48302180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48302180.eqep: QPOSCNT:0x00000000
[ +0.000008] eqep 48302180.eqep: omit_interrupt:0
[ +0.000007] eqep 48302180.eqep: QEINT:0x0800
[ +0.000007] eqep 48302180.eqep: QUPRD:0x05f5e100
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e read
[ +0.000019] eqep 48302180.eqep: irq:147, clk_rate:100000000
[ +0.000201] eqep 48304180.eqep: ver. 1.0
[ +0.000115] eqep 48304180.eqep: count_mode:0
[ +0.000011] eqep 48304180.eqep: invert_qa:1
[ +0.000008] eqep 48304180.eqep: invert_qb:1
[ +0.000008] eqep 48304180.eqep: invert_qi:0
[ +0.000008] eqep 48304180.eqep: invert_qs:0
[ +0.000008] eqep 48304180.eqep: swap_inputs:0
[ +0.000008] eqep 48304180.eqep: QDECCTL:0x0180
[ +0.000007] eqep 48304180.eqep: QPOSINIT:0x00000000
[ +0.000007] eqep 48304180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48304180.eqep: QPOSCNT:0x00000000
[ +0.000010] eqep 48304180.eqep: omit_interrupt:0
[ +0.000006] eqep 48304180.eqep: QEINT:0x0800
[ +0.000008] eqep 48304180.eqep: QUPRD:0x05f5e100
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e read
[ +0.000018] eqep 48304180.eqep: irq:149, clk_rate:100000000
[ +0.030283] libphy: Fixed MDIO Bus: probed
[ +0.000854] CAN device driver interface
[ +0.001443] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=50)
[ +0.000968] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=51)
[ +0.054626] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ +0.000018] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ +0.001036] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ +0.014951] libphy: 4a101000.mdio: probed
[ +0.000028] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ +0.001105] cpsw 4a100000.ethernet: Detected MACID = 40:bd:32:dd:c7:10
[ +0.000153] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ +0.000010] cpsw 4a100000.ethernet: ALE Table size 1024
[ +0.000055] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[ +0.003864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ +0.000062] ehci-platform: EHCI generic platform driver
[ +0.000398] ehci-omap: OMAP-EHCI Host Controller driver
[ +0.000935] usbcore: registered new interface driver usb-storage
[ +0.003611] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[ +0.003588] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[ +0.004518] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ +0.000042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ +0.000308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ +0.000011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000008] usb usb1: Product: MUSB HDRC host driver
[ +0.000007] usb usb1: Manufacturer: Linux 4.14.108-ti-r107 musb-hcd
[ +0.000007] usb usb1: SerialNumber: musb-hdrc.1
[ +0.000933] hub 1-0:1.0: USB hub found
[ +0.000083] hub 1-0:1.0: 1 port detected
[ +0.012780] omap_rtc 44e3e000.rtc: registered as rtc0
[ +0.001488] i2c /dev entries driver
[ +0.001202] Driver for 1-wire Dallas network protocol.
[ +0.003548] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ +0.000620] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ +0.001640] cpuidle: enable-method property 'ti,am3352' found operations
[ +0.000880] sdhci: Secure Digital Host Controller Interface driver
[ +0.000009] sdhci: Copyright(c) Pierre Ossman
[ +0.000836] omap_hsmmc 48060000.mmc: Got CD GPIO
[ +0.076486] mmc0: host does not support reading read-only switch, assuming write-enable
[ +0.001348] sdhci-pltfm: SDHCI platform and OF driver helper
[ +0.002201] mmc0: Problem switching card into high-speed mode!
[ +0.000147] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.000557] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ +0.000294] mmc0: new SDHC card at address 0001
[ +0.001338] mmcblk0: mmc0:0001 SD 29.1 GiB
[ +0.002186] mmcblk0: p1
[ +0.000778] omap-aes 53500000.aes: will run requests pump with realtime priority
[ +0.006101] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ +0.007521] hidraw: raw HID events driver (C) Jiri Kosina
[ +0.000837] usbcore: registered new interface driver usbhid
[ +0.000009] usbhid: USB HID core driver
[ +0.000400] remoteproc remoteproc0: wkup_m3 is available
[ +0.010813] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information.
[ +0.000013] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ +0.000978] NET: Registered protocol family 10
[ +0.005796] Segment Routing with IPv6
[ +0.000083] mip6: Mobile IPv6
[ +0.000020] NET: Registered protocol family 17
[ +0.000018] can: controller area network core (rev 20170425 abi 9)
[ +0.000086] NET: Registered protocol family 29
[ +0.000215] Key type dns_resolver registered
[ +0.000008] mpls_gso: MPLS GSO support
[ +0.000395] omap_voltage_late_init: Voltage driver support not added
[ +0.007209] PM: Cannot get wkup_m3_ipc handle
[ +0.004667] ThumbEE CPU extension supported.
[ +0.000027] Registering SWP/SWPB emulation handler
[ +0.001007] registered taskstats version 1
[ +0.000132] zswap: loaded using pool lzo/zbud
[ +0.002645] Btrfs loaded, crc32c=crc32c-generic
[ +0.000100] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ +0.000026] ima: Allocated hash algorithm: sha256
[ +0.007664] mmc1: new high speed MMC card at address 0001
[ +0.002831] mmcblk1: mmc1:0001 M62704 3.56 GiB
[ +0.003473] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[ +0.000624] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[ +0.000583] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB
[ +0.001531] mmcblk1: p1
[ +0.140954] tda998x 0-0070: found TDA19988
[ +0.001735] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ +0.000035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0.000006] [drm] No driver support for vblank timestamp query.
[ +0.000510] [drm] Cannot find any crtc or sizes
[ +0.000730] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1
[ +0.014656] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[ +0.000605] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ +0.000513] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000113] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ +0.001688] remoteproc remoteproc0: powering up wkup_m3
[ +0.000120] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[ +0.004224] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ +0.000019] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
[ +0.002991] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
[ +0.008974] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
[ +0.010391] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
[ +0.002359] PM: bootloader does not support rtc-only!
[ +0.001220] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ +0.000018] of_cfs_init
[ +0.000168] of_cfs_init: OK
[ +0.001371] ALSA device list:
[ +0.000014] #0: TI BeagleBone Black
[ +0.007113] Freeing unused kernel memory: 1024K
[ +0.161693] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ +0.148388] usb 1-1: New USB device found, idVendor=1d50, idProduct=60a1
[ +0.000019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000008] usb 1-1: Product: AIRSPY
[ +0.000007] usb 1-1: Manufacturer: www.airspy.com
[ +0.000007] usb 1-1: SerialNumber: AIRSPY SN:26A464DC286C2693
[ +0.648026] [drm] Cannot find any crtc or sizes
[ +7.341459] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ +1.204552] systemd[1]: System time before build time, advancing clock.
[ +0.157803] ip_tables: (C) 2000-2006 Netfilter Core Team
[ +0.038044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ +0.000673] systemd[1]: Detected architecture arm.
[ +0.019200] systemd[1]: Set hostname to <arm>.
[ +1.187907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0.000494] systemd[1]: Reached target Remote File Systems.
[ +0.001927] systemd[1]: Created slice User and Session Slice.
[ +0.000563] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0.001401] systemd[1]: Created slice System Slice.
[ +0.000694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ +0.000490] systemd[1]: Listening on udev Kernel Socket.
[ +1.510807] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ +0.467259] systemd-journald[544]: Received request to flush runtime journal from PID 1
[ +4.413490] Bluetooth: Core ver 2.22
[ +0.000157] NET: Registered protocol family 31
[ +0.000008] Bluetooth: HCI device and connection manager initialized
[ +0.000031] Bluetooth: HCI socket layer initialized
[ +0.000017] Bluetooth: L2CAP socket layer initialized
[ +0.000049] Bluetooth: SCO socket layer initialized
[ +0.552033] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[Jul 2 04:38] net eth0: initializing cpsw version 1.12 (0)
[ +0.108616] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
[ +0.054992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ +2.558846] using random self ethernet address
[ +0.000020] using random host ethernet address
[ +0.125966] using random self ethernet address
[ +0.000020] using random host ethernet address
[ +0.452082] usb0: HOST MAC 40:bd:32:dd:c7:11
[ +0.002797] usb0: MAC 40:bd:32:dd:c7:12
[ +0.011252] usb1: HOST MAC 40:bd:32:dd:c7:14
[ +0.004677] usb1: MAC 40:bd:32:dd:c7:15
[ +0.597074] configfs-gadget gadget: high-speed config #1: c
[ +0.183661] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ +0.223207] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ +0.097675] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[ +6.758445] airspy 1-1:1.0: Board ID: 00
[ +0.000021] airspy 1-1:1.0: Firmware version: AirSpy MINI v1.0.0-rc10-0-g946184a 2016-09-19
[ +0.013486] airspy 1-1:1.0: Registered as swradio0
[ +0.000020] airspy 1-1:1.0: SDR API is still slightly experimental and functionality changes may follow
[ +0.000265] usbcore: registered new interface driver airspy
ubuntu@arm:~$
ubuntu@arm:~$ python3 test_simplesoapy.py
['driver=airspy, serial=26a464dc:286c2693, device_id=0, label=AIRSPY [26a464dc:286c2693]']
DEBUG:simplesoapy:SoapySDR stream - args: {}
[INFO] Using format CF32.
DEBUG:simplesoapy:SoapySDR stream - buffer size: 65536
DEBUG:simplesoapy:SoapySDR stream - read timeout: 0.121845
Traceback (most recent call last):
File "test_simplesoapy.py", line 29, in <module>
sdr.read_stream_into_buffer(samples)
File "/usr/local/lib/python3.6/dist-packages/simplesoapy.py", line 491, in read_stream_into_buffer
res.ret, SoapySDR.errToStr(res.ret)
RuntimeError: Unhandled readStream() error: -1 (TIMEOUT)
ubuntu@arm:~$
ubuntu@arm:~$ dmesg --reltime
[Jul 2 04:37] Booting Linux on physical CPU 0x0
[ +0.000000] Linux version 4.14.108-ti-r107 (root@w2-imx6q-wandboard-2gb) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04)) #1 SMP PREEMPT Wed Jun 12 05:51:34 UTC 2019
[ +0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
[ +0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ +0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black
[ +0.000000] Memory policy: Data cache writeback
[ +0.000000] efi: Getting EFI parameters from FDT:
[ +0.000000] efi: UEFI not found.
[ +0.000000] cma: Reserved 48 MiB at 0x9c800000
[ +0.000000] On node 0 totalpages: 130560
[ +0.000000] free_area_init_node: node 0, pgdat c15dd380, node_mem_map df961000
[ +0.000000] Normal zone: 1148 pages used for memmap
[ +0.000000] Normal zone: 0 pages reserved
[ +0.000000] Normal zone: 130560 pages, LIFO batch:31
[ +0.000000] CPU: All CPU(s) started in SVC mode.
[ +0.000000] AM335X ES2.1 (sgx neon)
[ +0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0
[ +0.000000] percpu: Embedded 18 pages/cpu @df8e6000 s41548 r8192 d23988 u73728
[ +0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096
[ +0.000000] pcpu-alloc: [0] 0
[ +0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412
[ +0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 cape_universal=enable quiet
[ +0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ +0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ +0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ +0.000000] Memory: 437476K/522240K available (13312K kernel code, 1084K rwdata, 4236K rodata, 1024K init, 361K bss, 35612K reserved, 49152K cma-reserved, 0K highmem)
[ +0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB)
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc0e00000 (14304 kB)
.init : 0xc1400000 - 0xc1500000 (1024 kB)
.data : 0xc1500000 - 0xc160f200 (1085 kB)
.bss : 0xc1619964 - 0xc1673e80 ( 362 kB)
[ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ +0.000000] ftrace: allocating 40946 entries in 121 pages
[ +0.000000] Preemptible hierarchical RCU implementation.
[ +0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
[ +0.000000] Tasks RCU enabled.
[ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[ +0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ +0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ +0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[ +0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[ +0.000021] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[ +0.000011] OMAP clocksource: timer1 at 24000000 Hz
[ +0.002200] timer_probe: no matching timers found
[ +0.000365] Console: colour dummy device 80x30
[ +0.000032] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
[ +0.000005] This ensures that you still see kernel messages. Please
[ +0.000005] update your kernel commandline.
[ +0.000027] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656)
[ +0.018298] pid_max: default: 32768 minimum: 301
[ +0.000271] Security Framework initialized
[ +0.000016] Yama: becoming mindful.
[ +0.000040] AppArmor: AppArmor disabled by boot time parameter
[ +0.000075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ +0.000013] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ +0.001047] CPU: Testing write buffer coherency: ok
[ +0.000067] CPU0: Spectre v2: using BPIALL workaround
[ +0.000466] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ +0.014096] Setting up static identity map for 0x80100000 - 0x80100060
[ +0.007908] Hierarchical SRCU implementation.
[ +0.011129] EFI services will not be available.
[ +0.004878] smp: Bringing up secondary CPUs ...
[ +0.000015] smp: Brought up 1 node, 1 CPU
[ +0.000011] SMP: Total of 1 processors activated (995.32 BogoMIPS).
[ +0.000007] CPU: All CPU(s) started in SVC mode.
[ +0.001683] devtmpfs: initialized
[ +0.038664] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ +0.000459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ +0.000025] futex hash table entries: 256 (order: 2, 16384 bytes)
[ +0.003940] xor: measuring software checksum speed
[ +0.039177] arm4regs : 1217.000 MB/sec
[ +0.039987] 8regs : 1091.000 MB/sec
[ +0.039999] 32regs : 1170.000 MB/sec
[ +0.040000] neon : 1673.000 MB/sec
[ +0.000007] xor: using function: neon (1673.000 MB/sec)
[ +0.000019] pinctrl core: initialized pinctrl subsystem
[ +0.001246] NET: Registered protocol family 16
[ +0.003957] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ +0.086844] omap_hwmod: debugss: _wait_target_disable failed
[ +0.040785] cpuidle: using governor menu
[ +0.007235] OMAP GPIO hardware version 0.1
[ +0.025912] No ATAGs?
[ +0.000021] hw-breakpoint: debug architecture 0x4 unsupported.
[ +0.001471] omap4_sram_init:Unable to allocate sram needed to handle errata I688
[ +0.000014] omap4_sram_init:Unable to get sram pool needed to handle errata I688
[ +0.024641] raid6: using algorithm neonx8 gen() 0 MB/s
[ +0.000013] raid6: .... xor() 0 MB/s, rmw enabled
[ +0.000008] raid6: using neon recovery algorithm
[ +0.007997] edma 49000000.edma: TI EDMA DMA engine driver
[ +0.007062] SCSI subsystem initialized
[ +0.000971] libata version 3.00 loaded.
[ +0.000282] usbcore: registered new interface driver usbfs
[ +0.000070] usbcore: registered new interface driver hub
[ +0.000119] usbcore: registered new device driver usb
[ +0.000910] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
[ +0.000980] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[ +0.001323] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz
[ +0.000489] media: Linux media interface: v0.10
[ +0.000066] Linux video capture interface: v2.00
[ +0.000172] pps_core: LinuxPPS API ver. 1 registered
[ +0.000007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ +0.000022] PTP clock support registered
[ +0.000666] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
[ +0.003002] FPGA manager framework
[ +0.000087] Advanced Linux Sound Architecture Driver Initialized.
[ +0.000650] NetLabel: Initializing
[ +0.000010] NetLabel: domain hash size = 128
[ +0.000006] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ +0.000080] NetLabel: unlabeled traffic allowed by default
[ +0.003404] clocksource: Switched to clocksource timer1
[ +0.141296] VFS: Disk quotas dquot_6.6.0
[ +0.000136] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ +0.012713] NET: Registered protocol family 2
[ +0.000904] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ +0.000048] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ +0.000058] TCP: Hash tables configured (established 4096 bind 4096)
[ +0.000118] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ +0.000023] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ +0.000217] NET: Registered protocol family 1
[ +0.009036] RPC: Registered named UNIX socket transport module.
[ +0.000012] RPC: Registered udp transport module.
[ +0.000005] RPC: Registered tcp transport module.
[ +0.000005] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ +0.000789] Unpacking initramfs...
[ +0.366706] random: fast init done
[ +0.042993] Freeing initrd memory: 7304K
[ +0.000652] hw perfevents: no interrupt-affinity property for /pmu, guessing.
[ +0.000415] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
[ +0.002070] audit: initializing netlink subsys (disabled)
[ +0.001244] audit: type=2000 audit(1.064:1): state=initialized audit_enabled=0 res=1
[ +0.000131] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[ +0.006070] zbud: loaded
[ +0.007664] NFS: Registering the id_resolver key type
[ +0.000042] Key type id_resolver registered
[ +0.000006] Key type id_legacy registered
[ +0.000017] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ +0.000380] fuse init (API version 7.26)
[ +0.009823] Key type asymmetric registered
[ +0.000015] Asymmetric key parser 'x509' registered
[ +0.000126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ +0.004602] io scheduler noop registered
[ +0.000012] io scheduler deadline registered
[ +0.000297] io scheduler cfq registered (default)
[ +0.000010] io scheduler mq-deadline registered
[ +0.002316] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ +0.012535] gpio-of-helper ocp:cape-universal: ready
[ +0.011200] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
[ +0.002484] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ +0.003741] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250
[ +0.011852] console [ttyS0] enabled
[ +0.001160] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250
[ +0.001013] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250
[ +0.000964] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250
[ +0.001170] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250
[ +0.000972] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250
[ +0.003672] omap_rng 48310000.rng: Random Number Generator ver. 20
[ +0.001242] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0
[ +0.000110] usbcore: registered new interface driver udl
[ +0.005737] random: crng init done
[ +0.008568] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000288] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000258] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000218] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000538] eqep 48300180.eqep: ver. 1.0
[ +0.000189] eqep 48300180.eqep: count_mode:0
[ +0.000011] eqep 48300180.eqep: invert_qa:1
[ +0.000008] eqep 48300180.eqep: invert_qb:1
[ +0.000009] eqep 48300180.eqep: invert_qi:0
[ +0.000008] eqep 48300180.eqep: invert_qs:0
[ +0.000009] eqep 48300180.eqep: swap_inputs:0
[ +0.000008] eqep 48300180.eqep: QDECCTL:0x0180
[ +0.000009] eqep 48300180.eqep: QPOSINIT:0x00000000
[ +0.000007] eqep 48300180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48300180.eqep: QPOSCNT:0x00000000
[ +0.000009] eqep 48300180.eqep: omit_interrupt:0
[ +0.000007] eqep 48300180.eqep: QEINT:0x0800
[ +0.000007] eqep 48300180.eqep: QUPRD:0x05f5e100
[ +0.000008] eqep 48300180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48300180.eqep: QEPCTL:0x009e read
[ +0.000024] eqep 48300180.eqep: irq:145, clk_rate:100000000
[ +0.000242] eqep 48302180.eqep: ver. 1.0
[ +0.000130] eqep 48302180.eqep: count_mode:0
[ +0.000011] eqep 48302180.eqep: invert_qa:1
[ +0.000008] eqep 48302180.eqep: invert_qb:1
[ +0.000008] eqep 48302180.eqep: invert_qi:0
[ +0.000008] eqep 48302180.eqep: invert_qs:0
[ +0.000008] eqep 48302180.eqep: swap_inputs:0
[ +0.000007] eqep 48302180.eqep: QDECCTL:0x0180
[ +0.000008] eqep 48302180.eqep: QPOSINIT:0x00000000
[ +0.000008] eqep 48302180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48302180.eqep: QPOSCNT:0x00000000
[ +0.000008] eqep 48302180.eqep: omit_interrupt:0
[ +0.000007] eqep 48302180.eqep: QEINT:0x0800
[ +0.000007] eqep 48302180.eqep: QUPRD:0x05f5e100
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e read
[ +0.000019] eqep 48302180.eqep: irq:147, clk_rate:100000000
[ +0.000201] eqep 48304180.eqep: ver. 1.0
[ +0.000115] eqep 48304180.eqep: count_mode:0
[ +0.000011] eqep 48304180.eqep: invert_qa:1
[ +0.000008] eqep 48304180.eqep: invert_qb:1
[ +0.000008] eqep 48304180.eqep: invert_qi:0
[ +0.000008] eqep 48304180.eqep: invert_qs:0
[ +0.000008] eqep 48304180.eqep: swap_inputs:0
[ +0.000008] eqep 48304180.eqep: QDECCTL:0x0180
[ +0.000007] eqep 48304180.eqep: QPOSINIT:0x00000000
[ +0.000007] eqep 48304180.eqep: QPOSMAX:0xffffffff
[ +0.000007] eqep 48304180.eqep: QPOSCNT:0x00000000
[ +0.000010] eqep 48304180.eqep: omit_interrupt:0
[ +0.000006] eqep 48304180.eqep: QEINT:0x0800
[ +0.000008] eqep 48304180.eqep: QUPRD:0x05f5e100
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e write
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e read
[ +0.000018] eqep 48304180.eqep: irq:149, clk_rate:100000000
[ +0.030283] libphy: Fixed MDIO Bus: probed
[ +0.000854] CAN device driver interface
[ +0.001443] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=50)
[ +0.000968] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=51)
[ +0.054626] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000
[ +0.000018] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ +0.001036] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe]
[ +0.014951] libphy: 4a101000.mdio: probed
[ +0.000028] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ +0.001105] cpsw 4a100000.ethernet: Detected MACID = 40:bd:32:dd:c7:10
[ +0.000153] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4
[ +0.000010] cpsw 4a100000.ethernet: ALE Table size 1024
[ +0.000055] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies)
[ +0.003864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ +0.000062] ehci-platform: EHCI generic platform driver
[ +0.000398] ehci-omap: OMAP-EHCI Host Controller driver
[ +0.000935] usbcore: registered new interface driver usb-storage
[ +0.003611] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator
[ +0.003588] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator
[ +0.004518] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
[ +0.000042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
[ +0.000308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ +0.000011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ +0.000008] usb usb1: Product: MUSB HDRC host driver
[ +0.000007] usb usb1: Manufacturer: Linux 4.14.108-ti-r107 musb-hcd
[ +0.000007] usb usb1: SerialNumber: musb-hdrc.1
[ +0.000933] hub 1-0:1.0: USB hub found
[ +0.000083] hub 1-0:1.0: 1 port detected
[ +0.012780] omap_rtc 44e3e000.rtc: registered as rtc0
[ +0.001488] i2c /dev entries driver
[ +0.001202] Driver for 1-wire Dallas network protocol.
[ +0.003548] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ +0.000620] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
[ +0.001640] cpuidle: enable-method property 'ti,am3352' found operations
[ +0.000880] sdhci: Secure Digital Host Controller Interface driver
[ +0.000009] sdhci: Copyright(c) Pierre Ossman
[ +0.000836] omap_hsmmc 48060000.mmc: Got CD GPIO
[ +0.076486] mmc0: host does not support reading read-only switch, assuming write-enable
[ +0.001348] sdhci-pltfm: SDHCI platform and OF driver helper
[ +0.002201] mmc0: Problem switching card into high-speed mode!
[ +0.000147] ledtrig-cpu: registered to indicate activity on CPUs
[ +0.000557] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ +0.000294] mmc0: new SDHC card at address 0001
[ +0.001338] mmcblk0: mmc0:0001 SD 29.1 GiB
[ +0.002186] mmcblk0: p1
[ +0.000778] omap-aes 53500000.aes: will run requests pump with realtime priority
[ +0.006101] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ +0.007521] hidraw: raw HID events driver (C) Jiri Kosina
[ +0.000837] usbcore: registered new interface driver usbhid
[ +0.000009] usbhid: USB HID core driver
[ +0.000400] remoteproc remoteproc0: wkup_m3 is available
[ +0.010813] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information.
[ +0.000013] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[ +0.000978] NET: Registered protocol family 10
[ +0.005796] Segment Routing with IPv6
[ +0.000083] mip6: Mobile IPv6
[ +0.000020] NET: Registered protocol family 17
[ +0.000018] can: controller area network core (rev 20170425 abi 9)
[ +0.000086] NET: Registered protocol family 29
[ +0.000215] Key type dns_resolver registered
[ +0.000008] mpls_gso: MPLS GSO support
[ +0.000395] omap_voltage_late_init: Voltage driver support not added
[ +0.007209] PM: Cannot get wkup_m3_ipc handle
[ +0.004667] ThumbEE CPU extension supported.
[ +0.000027] Registering SWP/SWPB emulation handler
[ +0.001007] registered taskstats version 1
[ +0.000132] zswap: loaded using pool lzo/zbud
[ +0.002645] Btrfs loaded, crc32c=crc32c-generic
[ +0.000100] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ +0.000026] ima: Allocated hash algorithm: sha256
[ +0.007664] mmc1: new high speed MMC card at address 0001
[ +0.002831] mmcblk1: mmc1:0001 M62704 3.56 GiB
[ +0.003473] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB
[ +0.000624] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB
[ +0.000583] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB
[ +0.001531] mmcblk1: p1
[ +0.140954] tda998x 0-0070: found TDA19988
[ +0.001735] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)
[ +0.000035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0.000006] [drm] No driver support for vblank timestamp query.
[ +0.000510] [drm] Cannot find any crtc or sizes
[ +0.000730] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1
[ +0.014656] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0
[ +0.000605] tps65217 0-0024: TPS65217 ID 0xe version 1.2
[ +0.000513] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
[ +0.000113] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[ +0.001688] remoteproc remoteproc0: powering up wkup_m3
[ +0.000120] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168
[ +0.004224] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ +0.000019] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193
[ +0.002991] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback
[ +0.008974] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX
[ +0.010391] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok
[ +0.002359] PM: bootloader does not support rtc-only!
[ +0.001220] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)
[ +0.000018] of_cfs_init
[ +0.000168] of_cfs_init: OK
[ +0.001371] ALSA device list:
[ +0.000014] #0: TI BeagleBone Black
[ +0.007113] Freeing unused kernel memory: 1024K
[ +0.161693] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[ +0.148388] usb 1-1: New USB device found, idVendor=1d50, idProduct=60a1
[ +0.000019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000008] usb 1-1: Product: AIRSPY
[ +0.000007] usb 1-1: Manufacturer: www.airspy.com
[ +0.000007] usb 1-1: SerialNumber: AIRSPY SN:26A464DC286C2693
[ +0.648026] [drm] Cannot find any crtc or sizes
[ +7.341459] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[ +1.204552] systemd[1]: System time before build time, advancing clock.
[ +0.157803] ip_tables: (C) 2000-2006 Netfilter Core Team
[ +0.038044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ +0.000673] systemd[1]: Detected architecture arm.
[ +0.019200] systemd[1]: Set hostname to <arm>.
[ +1.187907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0.000494] systemd[1]: Reached target Remote File Systems.
[ +0.001927] systemd[1]: Created slice User and Session Slice.
[ +0.000563] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0.001401] systemd[1]: Created slice System Slice.
[ +0.000694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ +0.000490] systemd[1]: Listening on udev Kernel Socket.
[ +1.510807] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
[ +0.467259] systemd-journald[544]: Received request to flush runtime journal from PID 1
[ +4.413490] Bluetooth: Core ver 2.22
[ +0.000157] NET: Registered protocol family 31
[ +0.000008] Bluetooth: HCI device and connection manager initialized
[ +0.000031] Bluetooth: HCI socket layer initialized
[ +0.000017] Bluetooth: L2CAP socket layer initialized
[ +0.000049] Bluetooth: SCO socket layer initialized
[ +0.552033] nf_conntrack version 0.5.0 (8192 buckets, 32768 max)
[Jul 2 04:38] net eth0: initializing cpsw version 1.12 (0)
[ +0.108616] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL)
[ +0.054992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ +2.558846] using random self ethernet address
[ +0.000020] using random host ethernet address
[ +0.125966] using random self ethernet address
[ +0.000020] using random host ethernet address
[ +0.452082] usb0: HOST MAC 40:bd:32:dd:c7:11
[ +0.002797] usb0: MAC 40:bd:32:dd:c7:12
[ +0.011252] usb1: HOST MAC 40:bd:32:dd:c7:14
[ +0.004677] usb1: MAC 40:bd:32:dd:c7:15
[ +0.597074] configfs-gadget gadget: high-speed config #1: c
[ +0.183661] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ +0.223207] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ +0.097675] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready
[ +6.758445] airspy 1-1:1.0: Board ID: 00
[ +0.000021] airspy 1-1:1.0: Firmware version: AirSpy MINI v1.0.0-rc10-0-g946184a 2016-09-19
[ +0.013486] airspy 1-1:1.0: Registered as swradio0
[ +0.000020] airspy 1-1:1.0: SDR API is still slightly experimental and functionality changes may follow
[ +0.000265] usbcore: registered new interface driver airspy
[Jul 2 04:44] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1
[ +0.103376] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1
[ +1.236144] musb_ep_program 916: broken !rx_reinit, ep2 csr 0003
[ +0.006071] musb_host_rx 1965: Rx interrupt with no errors or packet!
[ +0.006563] musb_host_rx 1965: Rx interrupt with no errors or packet!
ubuntu@arm:~$
[Jul 2 04:44] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1
[ +0.103376] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1
[ +1.236144] musb_ep_program 916: broken !rx_reinit, ep2 csr 0003
[ +0.006071] musb_host_rx 1965: Rx interrupt with no errors or packet!
[ +0.006563] musb_host_rx 1965: Rx interrupt with no errors or packet!
ubuntu@arm:~$ SoapySDRUtil --rate=3e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 3 Msps
Starting stream loop, press Ctrl+C to exit...
0.281648 Msps 1.12659 MBps
0.279474 Msps 1.1179 MBps
0.286524 Msps 1.14609 MBps
/^C
ubuntu@arm:~$ SoapySDRUtil --rate=6e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 6 Msps
Starting stream loop, press Ctrl+C to exit...
0.218708 Msps 0.874832 MBps
0.210391 Msps 0.841564 MBps
0.239425 Msps 0.957699 MBps
/^C
ubuntu@arm:~$ SoapySDRUtil --rate=0.3e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 0.3 Msps
Starting stream loop, press Ctrl+C to exit...
0.270995 Msps 1.08398 MBps
0.280043 Msps 1.12017 MBps
0.285095 Msps 1.14038 MBps
/^C
ubuntu@arm:~$ SoapySDRUtil --rate=0.2e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 0.2 Msps
Starting stream loop, press Ctrl+C to exit...
0.271759 Msps 1.08704 MBps
0.277609 Msps 1.11043 MBps
0.277345 Msps 1.10938 MBps
ubuntu@e480:~$ SoapySDRUtil --rate=3e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 3 Msps
Starting stream loop, press Ctrl+C to exit...
2.99428 Msps 11.9771 MBps
2.99857 Msps 11.9943 MBps
2.99843 Msps 11.9937 MBps
-^C
ubuntu@e480:~$ SoapySDRUtil --rate=6e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 6 Msps
Starting stream loop, press Ctrl+C to exit...
5.98818 Msps 23.9527 MBps
5.99616 Msps 23.9846 MBps
5.99551 Msps 23.982 MBps
-^C
ubuntu@e480:~$ SoapySDRUtil --rate=0.3e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 0.3 Msps
Starting stream loop, press Ctrl+C to exit...
5.98507 Msps 23.9403 MBps
5.9938 Msps 23.9752 MBps
5.9956 Msps 23.9824 MBps
\^C
ubuntu@e480:~$ SoapySDRUtil --rate=0.2e6 --direction=RX
######################################################
## Soapy SDR -- the SDR abstraction library ##
######################################################
[INFO] Using format CS16.
Stream format: CS16
Num channels: 1
Element size: 4 bytes
Begin RX rate test at 0.2 Msps
Starting stream loop, press Ctrl+C to exit...
5.99154 Msps 23.9661 MBps
5.99301 Msps 23.972 MBps
5.99612 Msps 23.9845 MBps
-^C
@takurx
Copy link
Author

takurx commented Jul 2, 2019

1, Beagle bone black boot and it was inserted airspy by USB.
2. I check dmeg command
- log1_boot_and_inserted_airspy_dmesg_--reltime-1.txt
3. execute simaplesoapy command. ($ python3 test_simplesoapy.py)
- log2_simeplesopay_airspy.txt
4. I check dmeg command again
- log3_after_simplesoapy_dmesg_--reltime-1.txt
- log4_error_simplesoapy.txt (incremental against log_boot_and_inserted_airspy_dmesg_--reltime-1.txt)

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment