Last active
July 3, 2019 07:30
-
-
Save takurx/fde81db1a354ca7f402fb5664f4c0125 to your computer and use it in GitHub Desktop.
log_dmesg_--reltime-1.txt
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ubuntu@arm:~$ dmesg --reltime | |
[Jul 2 04:37] Booting Linux on physical CPU 0x0 | |
[ +0.000000] Linux version 4.14.108-ti-r107 (root@w2-imx6q-wandboard-2gb) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04)) #1 SMP PREEMPT Wed Jun 12 05:51:34 UTC 2019 | |
[ +0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
[ +0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ +0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black | |
[ +0.000000] Memory policy: Data cache writeback | |
[ +0.000000] efi: Getting EFI parameters from FDT: | |
[ +0.000000] efi: UEFI not found. | |
[ +0.000000] cma: Reserved 48 MiB at 0x9c800000 | |
[ +0.000000] On node 0 totalpages: 130560 | |
[ +0.000000] free_area_init_node: node 0, pgdat c15dd380, node_mem_map df961000 | |
[ +0.000000] Normal zone: 1148 pages used for memmap | |
[ +0.000000] Normal zone: 0 pages reserved | |
[ +0.000000] Normal zone: 130560 pages, LIFO batch:31 | |
[ +0.000000] CPU: All CPU(s) started in SVC mode. | |
[ +0.000000] AM335X ES2.1 (sgx neon) | |
[ +0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0 | |
[ +0.000000] percpu: Embedded 18 pages/cpu @df8e6000 s41548 r8192 d23988 u73728 | |
[ +0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096 | |
[ +0.000000] pcpu-alloc: [0] 0 | |
[ +0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
[ +0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 cape_universal=enable quiet | |
[ +0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ +0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ +0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ +0.000000] Memory: 437476K/522240K available (13312K kernel code, 1084K rwdata, 4236K rodata, 1024K init, 361K bss, 35612K reserved, 49152K cma-reserved, 0K highmem) | |
[ +0.000000] Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) | |
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) | |
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
.text : 0xc0008000 - 0xc0e00000 (14304 kB) | |
.init : 0xc1400000 - 0xc1500000 (1024 kB) | |
.data : 0xc1500000 - 0xc160f200 (1085 kB) | |
.bss : 0xc1619964 - 0xc1673e80 ( 362 kB) | |
[ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ +0.000000] ftrace: allocating 40946 entries in 121 pages | |
[ +0.000000] Preemptible hierarchical RCU implementation. | |
[ +0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. | |
[ +0.000000] Tasks RCU enabled. | |
[ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
[ +0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ +0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts | |
[ +0.000000] OMAP clockevent source: timer2 at 24000000 Hz | |
[ +0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ +0.000021] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ +0.000011] OMAP clocksource: timer1 at 24000000 Hz | |
[ +0.002200] timer_probe: no matching timers found | |
[ +0.000365] Console: colour dummy device 80x30 | |
[ +0.000032] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
[ +0.000005] This ensures that you still see kernel messages. Please | |
[ +0.000005] update your kernel commandline. | |
[ +0.000027] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) | |
[ +0.018298] pid_max: default: 32768 minimum: 301 | |
[ +0.000271] Security Framework initialized | |
[ +0.000016] Yama: becoming mindful. | |
[ +0.000040] AppArmor: AppArmor disabled by boot time parameter | |
[ +0.000075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ +0.000013] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ +0.001047] CPU: Testing write buffer coherency: ok | |
[ +0.000067] CPU0: Spectre v2: using BPIALL workaround | |
[ +0.000466] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
[ +0.014096] Setting up static identity map for 0x80100000 - 0x80100060 | |
[ +0.007908] Hierarchical SRCU implementation. | |
[ +0.011129] EFI services will not be available. | |
[ +0.004878] smp: Bringing up secondary CPUs ... | |
[ +0.000015] smp: Brought up 1 node, 1 CPU | |
[ +0.000011] SMP: Total of 1 processors activated (995.32 BogoMIPS). | |
[ +0.000007] CPU: All CPU(s) started in SVC mode. | |
[ +0.001683] devtmpfs: initialized | |
[ +0.038664] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
[ +0.000459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ +0.000025] futex hash table entries: 256 (order: 2, 16384 bytes) | |
[ +0.003940] xor: measuring software checksum speed | |
[ +0.039177] arm4regs : 1217.000 MB/sec | |
[ +0.039987] 8regs : 1091.000 MB/sec | |
[ +0.039999] 32regs : 1170.000 MB/sec | |
[ +0.040000] neon : 1673.000 MB/sec | |
[ +0.000007] xor: using function: neon (1673.000 MB/sec) | |
[ +0.000019] pinctrl core: initialized pinctrl subsystem | |
[ +0.001246] NET: Registered protocol family 16 | |
[ +0.003957] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
[ +0.086844] omap_hwmod: debugss: _wait_target_disable failed | |
[ +0.040785] cpuidle: using governor menu | |
[ +0.007235] OMAP GPIO hardware version 0.1 | |
[ +0.025912] No ATAGs? | |
[ +0.000021] hw-breakpoint: debug architecture 0x4 unsupported. | |
[ +0.001471] omap4_sram_init:Unable to allocate sram needed to handle errata I688 | |
[ +0.000014] omap4_sram_init:Unable to get sram pool needed to handle errata I688 | |
[ +0.024641] raid6: using algorithm neonx8 gen() 0 MB/s | |
[ +0.000013] raid6: .... xor() 0 MB/s, rmw enabled | |
[ +0.000008] raid6: using neon recovery algorithm | |
[ +0.007997] edma 49000000.edma: TI EDMA DMA engine driver | |
[ +0.007062] SCSI subsystem initialized | |
[ +0.000971] libata version 3.00 loaded. | |
[ +0.000282] usbcore: registered new interface driver usbfs | |
[ +0.000070] usbcore: registered new interface driver hub | |
[ +0.000119] usbcore: registered new device driver usb | |
[ +0.000910] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe | |
[ +0.000980] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
[ +0.001323] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
[ +0.000489] media: Linux media interface: v0.10 | |
[ +0.000066] Linux video capture interface: v2.00 | |
[ +0.000172] pps_core: LinuxPPS API ver. 1 registered | |
[ +0.000007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ +0.000022] PTP clock support registered | |
[ +0.000666] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
[ +0.003002] FPGA manager framework | |
[ +0.000087] Advanced Linux Sound Architecture Driver Initialized. | |
[ +0.000650] NetLabel: Initializing | |
[ +0.000010] NetLabel: domain hash size = 128 | |
[ +0.000006] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ +0.000080] NetLabel: unlabeled traffic allowed by default | |
[ +0.003404] clocksource: Switched to clocksource timer1 | |
[ +0.141296] VFS: Disk quotas dquot_6.6.0 | |
[ +0.000136] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ +0.012713] NET: Registered protocol family 2 | |
[ +0.000904] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
[ +0.000048] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
[ +0.000058] TCP: Hash tables configured (established 4096 bind 4096) | |
[ +0.000118] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ +0.000023] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ +0.000217] NET: Registered protocol family 1 | |
[ +0.009036] RPC: Registered named UNIX socket transport module. | |
[ +0.000012] RPC: Registered udp transport module. | |
[ +0.000005] RPC: Registered tcp transport module. | |
[ +0.000005] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ +0.000789] Unpacking initramfs... | |
[ +0.366706] random: fast init done | |
[ +0.042993] Freeing initrd memory: 7304K | |
[ +0.000652] hw perfevents: no interrupt-affinity property for /pmu, guessing. | |
[ +0.000415] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
[ +0.002070] audit: initializing netlink subsys (disabled) | |
[ +0.001244] audit: type=2000 audit(1.064:1): state=initialized audit_enabled=0 res=1 | |
[ +0.000131] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
[ +0.006070] zbud: loaded | |
[ +0.007664] NFS: Registering the id_resolver key type | |
[ +0.000042] Key type id_resolver registered | |
[ +0.000006] Key type id_legacy registered | |
[ +0.000017] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ +0.000380] fuse init (API version 7.26) | |
[ +0.009823] Key type asymmetric registered | |
[ +0.000015] Asymmetric key parser 'x509' registered | |
[ +0.000126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
[ +0.004602] io scheduler noop registered | |
[ +0.000012] io scheduler deadline registered | |
[ +0.000297] io scheduler cfq registered (default) | |
[ +0.000010] io scheduler mq-deadline registered | |
[ +0.002316] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 | |
[ +0.012535] gpio-of-helper ocp:cape-universal: ready | |
[ +0.011200] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle | |
[ +0.002484] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
[ +0.003741] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250 | |
[ +0.011852] console [ttyS0] enabled | |
[ +0.001160] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250 | |
[ +0.001013] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250 | |
[ +0.000964] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250 | |
[ +0.001170] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250 | |
[ +0.000972] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250 | |
[ +0.003672] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
[ +0.001242] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 | |
[ +0.000110] usbcore: registered new interface driver udl | |
[ +0.005737] random: crng init done | |
[ +0.008568] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000288] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000258] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000218] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000538] eqep 48300180.eqep: ver. 1.0 | |
[ +0.000189] eqep 48300180.eqep: count_mode:0 | |
[ +0.000011] eqep 48300180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48300180.eqep: invert_qb:1 | |
[ +0.000009] eqep 48300180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48300180.eqep: invert_qs:0 | |
[ +0.000009] eqep 48300180.eqep: swap_inputs:0 | |
[ +0.000008] eqep 48300180.eqep: QDECCTL:0x0180 | |
[ +0.000009] eqep 48300180.eqep: QPOSINIT:0x00000000 | |
[ +0.000007] eqep 48300180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48300180.eqep: QPOSCNT:0x00000000 | |
[ +0.000009] eqep 48300180.eqep: omit_interrupt:0 | |
[ +0.000007] eqep 48300180.eqep: QEINT:0x0800 | |
[ +0.000007] eqep 48300180.eqep: QUPRD:0x05f5e100 | |
[ +0.000008] eqep 48300180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48300180.eqep: QEPCTL:0x009e read | |
[ +0.000024] eqep 48300180.eqep: irq:145, clk_rate:100000000 | |
[ +0.000242] eqep 48302180.eqep: ver. 1.0 | |
[ +0.000130] eqep 48302180.eqep: count_mode:0 | |
[ +0.000011] eqep 48302180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48302180.eqep: invert_qb:1 | |
[ +0.000008] eqep 48302180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48302180.eqep: invert_qs:0 | |
[ +0.000008] eqep 48302180.eqep: swap_inputs:0 | |
[ +0.000007] eqep 48302180.eqep: QDECCTL:0x0180 | |
[ +0.000008] eqep 48302180.eqep: QPOSINIT:0x00000000 | |
[ +0.000008] eqep 48302180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48302180.eqep: QPOSCNT:0x00000000 | |
[ +0.000008] eqep 48302180.eqep: omit_interrupt:0 | |
[ +0.000007] eqep 48302180.eqep: QEINT:0x0800 | |
[ +0.000007] eqep 48302180.eqep: QUPRD:0x05f5e100 | |
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e read | |
[ +0.000019] eqep 48302180.eqep: irq:147, clk_rate:100000000 | |
[ +0.000201] eqep 48304180.eqep: ver. 1.0 | |
[ +0.000115] eqep 48304180.eqep: count_mode:0 | |
[ +0.000011] eqep 48304180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48304180.eqep: invert_qb:1 | |
[ +0.000008] eqep 48304180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48304180.eqep: invert_qs:0 | |
[ +0.000008] eqep 48304180.eqep: swap_inputs:0 | |
[ +0.000008] eqep 48304180.eqep: QDECCTL:0x0180 | |
[ +0.000007] eqep 48304180.eqep: QPOSINIT:0x00000000 | |
[ +0.000007] eqep 48304180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48304180.eqep: QPOSCNT:0x00000000 | |
[ +0.000010] eqep 48304180.eqep: omit_interrupt:0 | |
[ +0.000006] eqep 48304180.eqep: QEINT:0x0800 | |
[ +0.000008] eqep 48304180.eqep: QUPRD:0x05f5e100 | |
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e read | |
[ +0.000018] eqep 48304180.eqep: irq:149, clk_rate:100000000 | |
[ +0.030283] libphy: Fixed MDIO Bus: probed | |
[ +0.000854] CAN device driver interface | |
[ +0.001443] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=50) | |
[ +0.000968] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=51) | |
[ +0.054626] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
[ +0.000018] davinci_mdio 4a101000.mdio: detected phy mask fffffffe | |
[ +0.001036] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] | |
[ +0.014951] libphy: 4a101000.mdio: probed | |
[ +0.000028] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
[ +0.001105] cpsw 4a100000.ethernet: Detected MACID = 40:bd:32:dd:c7:10 | |
[ +0.000153] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
[ +0.000010] cpsw 4a100000.ethernet: ALE Table size 1024 | |
[ +0.000055] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) | |
[ +0.003864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ +0.000062] ehci-platform: EHCI generic platform driver | |
[ +0.000398] ehci-omap: OMAP-EHCI Host Controller driver | |
[ +0.000935] usbcore: registered new interface driver usb-storage | |
[ +0.003611] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator | |
[ +0.003588] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator | |
[ +0.004518] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
[ +0.000042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
[ +0.000308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ +0.000011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000008] usb usb1: Product: MUSB HDRC host driver | |
[ +0.000007] usb usb1: Manufacturer: Linux 4.14.108-ti-r107 musb-hcd | |
[ +0.000007] usb usb1: SerialNumber: musb-hdrc.1 | |
[ +0.000933] hub 1-0:1.0: USB hub found | |
[ +0.000083] hub 1-0:1.0: 1 port detected | |
[ +0.012780] omap_rtc 44e3e000.rtc: registered as rtc0 | |
[ +0.001488] i2c /dev entries driver | |
[ +0.001202] Driver for 1-wire Dallas network protocol. | |
[ +0.003548] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ +0.000620] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
[ +0.001640] cpuidle: enable-method property 'ti,am3352' found operations | |
[ +0.000880] sdhci: Secure Digital Host Controller Interface driver | |
[ +0.000009] sdhci: Copyright(c) Pierre Ossman | |
[ +0.000836] omap_hsmmc 48060000.mmc: Got CD GPIO | |
[ +0.076486] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ +0.001348] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ +0.002201] mmc0: Problem switching card into high-speed mode! | |
[ +0.000147] ledtrig-cpu: registered to indicate activity on CPUs | |
[ +0.000557] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
[ +0.000294] mmc0: new SDHC card at address 0001 | |
[ +0.001338] mmcblk0: mmc0:0001 SD 29.1 GiB | |
[ +0.002186] mmcblk0: p1 | |
[ +0.000778] omap-aes 53500000.aes: will run requests pump with realtime priority | |
[ +0.006101] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
[ +0.007521] hidraw: raw HID events driver (C) Jiri Kosina | |
[ +0.000837] usbcore: registered new interface driver usbhid | |
[ +0.000009] usbhid: USB HID core driver | |
[ +0.000400] remoteproc remoteproc0: wkup_m3 is available | |
[ +0.010813] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information. | |
[ +0.000013] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. | |
[ +0.000978] NET: Registered protocol family 10 | |
[ +0.005796] Segment Routing with IPv6 | |
[ +0.000083] mip6: Mobile IPv6 | |
[ +0.000020] NET: Registered protocol family 17 | |
[ +0.000018] can: controller area network core (rev 20170425 abi 9) | |
[ +0.000086] NET: Registered protocol family 29 | |
[ +0.000215] Key type dns_resolver registered | |
[ +0.000008] mpls_gso: MPLS GSO support | |
[ +0.000395] omap_voltage_late_init: Voltage driver support not added | |
[ +0.007209] PM: Cannot get wkup_m3_ipc handle | |
[ +0.004667] ThumbEE CPU extension supported. | |
[ +0.000027] Registering SWP/SWPB emulation handler | |
[ +0.001007] registered taskstats version 1 | |
[ +0.000132] zswap: loaded using pool lzo/zbud | |
[ +0.002645] Btrfs loaded, crc32c=crc32c-generic | |
[ +0.000100] ima: No TPM chip found, activating TPM-bypass! (rc=-19) | |
[ +0.000026] ima: Allocated hash algorithm: sha256 | |
[ +0.007664] mmc1: new high speed MMC card at address 0001 | |
[ +0.002831] mmcblk1: mmc1:0001 M62704 3.56 GiB | |
[ +0.003473] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB | |
[ +0.000624] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB | |
[ +0.000583] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB | |
[ +0.001531] mmcblk1: p1 | |
[ +0.140954] tda998x 0-0070: found TDA19988 | |
[ +0.001735] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) | |
[ +0.000035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[ +0.000006] [drm] No driver support for vblank timestamp query. | |
[ +0.000510] [drm] Cannot find any crtc or sizes | |
[ +0.000730] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1 | |
[ +0.014656] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 | |
[ +0.000605] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
[ +0.000513] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000113] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
[ +0.001688] remoteproc remoteproc0: powering up wkup_m3 | |
[ +0.000120] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 | |
[ +0.004224] remoteproc remoteproc0: remote processor wkup_m3 is now up | |
[ +0.000019] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 | |
[ +0.002991] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback | |
[ +0.008974] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX | |
[ +0.010391] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok | |
[ +0.002359] PM: bootloader does not support rtc-only! | |
[ +0.001220] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) | |
[ +0.000018] of_cfs_init | |
[ +0.000168] of_cfs_init: OK | |
[ +0.001371] ALSA device list: | |
[ +0.000014] #0: TI BeagleBone Black | |
[ +0.007113] Freeing unused kernel memory: 1024K | |
[ +0.161693] usb 1-1: new high-speed USB device number 2 using musb-hdrc | |
[ +0.148388] usb 1-1: New USB device found, idVendor=1d50, idProduct=60a1 | |
[ +0.000019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ +0.000008] usb 1-1: Product: AIRSPY | |
[ +0.000007] usb 1-1: Manufacturer: www.airspy.com | |
[ +0.000007] usb 1-1: SerialNumber: AIRSPY SN:26A464DC286C2693 | |
[ +0.648026] [drm] Cannot find any crtc or sizes | |
[ +7.341459] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
[ +1.204552] systemd[1]: System time before build time, advancing clock. | |
[ +0.157803] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ +0.038044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
[ +0.000673] systemd[1]: Detected architecture arm. | |
[ +0.019200] systemd[1]: Set hostname to <arm>. | |
[ +1.187907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ +0.000494] systemd[1]: Reached target Remote File Systems. | |
[ +0.001927] systemd[1]: Created slice User and Session Slice. | |
[ +0.000563] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ +0.001401] systemd[1]: Created slice System Slice. | |
[ +0.000694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ +0.000490] systemd[1]: Listening on udev Kernel Socket. | |
[ +1.510807] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro | |
[ +0.467259] systemd-journald[544]: Received request to flush runtime journal from PID 1 | |
[ +4.413490] Bluetooth: Core ver 2.22 | |
[ +0.000157] NET: Registered protocol family 31 | |
[ +0.000008] Bluetooth: HCI device and connection manager initialized | |
[ +0.000031] Bluetooth: HCI socket layer initialized | |
[ +0.000017] Bluetooth: L2CAP socket layer initialized | |
[ +0.000049] Bluetooth: SCO socket layer initialized | |
[ +0.552033] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) | |
[Jul 2 04:38] net eth0: initializing cpsw version 1.12 (0) | |
[ +0.108616] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
[ +0.054992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ +2.558846] using random self ethernet address | |
[ +0.000020] using random host ethernet address | |
[ +0.125966] using random self ethernet address | |
[ +0.000020] using random host ethernet address | |
[ +0.452082] usb0: HOST MAC 40:bd:32:dd:c7:11 | |
[ +0.002797] usb0: MAC 40:bd:32:dd:c7:12 | |
[ +0.011252] usb1: HOST MAC 40:bd:32:dd:c7:14 | |
[ +0.004677] usb1: MAC 40:bd:32:dd:c7:15 | |
[ +0.597074] configfs-gadget gadget: high-speed config #1: c | |
[ +0.183661] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready | |
[ +0.223207] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready | |
[ +0.097675] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready | |
[ +6.758445] airspy 1-1:1.0: Board ID: 00 | |
[ +0.000021] airspy 1-1:1.0: Firmware version: AirSpy MINI v1.0.0-rc10-0-g946184a 2016-09-19 | |
[ +0.013486] airspy 1-1:1.0: Registered as swradio0 | |
[ +0.000020] airspy 1-1:1.0: SDR API is still slightly experimental and functionality changes may follow | |
[ +0.000265] usbcore: registered new interface driver airspy | |
ubuntu@arm:~$ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ubuntu@arm:~$ python3 test_simplesoapy.py | |
['driver=airspy, serial=26a464dc:286c2693, device_id=0, label=AIRSPY [26a464dc:286c2693]'] | |
DEBUG:simplesoapy:SoapySDR stream - args: {} | |
[INFO] Using format CF32. | |
DEBUG:simplesoapy:SoapySDR stream - buffer size: 65536 | |
DEBUG:simplesoapy:SoapySDR stream - read timeout: 0.121845 | |
Traceback (most recent call last): | |
File "test_simplesoapy.py", line 29, in <module> | |
sdr.read_stream_into_buffer(samples) | |
File "/usr/local/lib/python3.6/dist-packages/simplesoapy.py", line 491, in read_stream_into_buffer | |
res.ret, SoapySDR.errToStr(res.ret) | |
RuntimeError: Unhandled readStream() error: -1 (TIMEOUT) | |
ubuntu@arm:~$ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ubuntu@arm:~$ dmesg --reltime | |
[Jul 2 04:37] Booting Linux on physical CPU 0x0 | |
[ +0.000000] Linux version 4.14.108-ti-r107 (root@w2-imx6q-wandboard-2gb) (gcc version 7.4.0 (Ubuntu/Linaro 7.4.0-1ubuntu1~18.04)) #1 SMP PREEMPT Wed Jun 12 05:51:34 UTC 2019 | |
[ +0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d | |
[ +0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ +0.000000] OF: fdt: Machine model: TI AM335x BeagleBone Black | |
[ +0.000000] Memory policy: Data cache writeback | |
[ +0.000000] efi: Getting EFI parameters from FDT: | |
[ +0.000000] efi: UEFI not found. | |
[ +0.000000] cma: Reserved 48 MiB at 0x9c800000 | |
[ +0.000000] On node 0 totalpages: 130560 | |
[ +0.000000] free_area_init_node: node 0, pgdat c15dd380, node_mem_map df961000 | |
[ +0.000000] Normal zone: 1148 pages used for memmap | |
[ +0.000000] Normal zone: 0 pages reserved | |
[ +0.000000] Normal zone: 130560 pages, LIFO batch:31 | |
[ +0.000000] CPU: All CPU(s) started in SVC mode. | |
[ +0.000000] AM335X ES2.1 (sgx neon) | |
[ +0.000000] random: get_random_bytes called from start_kernel+0xac/0x454 with crng_init=0 | |
[ +0.000000] percpu: Embedded 18 pages/cpu @df8e6000 s41548 r8192 d23988 u73728 | |
[ +0.000000] pcpu-alloc: s41548 r8192 d23988 u73728 alloc=18*4096 | |
[ +0.000000] pcpu-alloc: [0] 0 | |
[ +0.000000] Built 1 zonelists, mobility grouping on. Total pages: 129412 | |
[ +0.000000] Kernel command line: console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 rng_core.default_quality=100 cape_universal=enable quiet | |
[ +0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes) | |
[ +0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ +0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) | |
[ +0.000000] Memory: 437476K/522240K available (13312K kernel code, 1084K rwdata, 4236K rodata, 1024K init, 361K bss, 35612K reserved, 49152K cma-reserved, 0K highmem) | |
[ +0.000000] Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
vmalloc : 0xe0000000 - 0xff800000 ( 504 MB) | |
lowmem : 0xc0000000 - 0xdfe00000 ( 510 MB) | |
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
.text : 0xc0008000 - 0xc0e00000 (14304 kB) | |
.init : 0xc1400000 - 0xc1500000 (1024 kB) | |
.data : 0xc1500000 - 0xc160f200 (1085 kB) | |
.bss : 0xc1619964 - 0xc1673e80 ( 362 kB) | |
[ +0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 | |
[ +0.000000] ftrace: allocating 40946 entries in 121 pages | |
[ +0.000000] Preemptible hierarchical RCU implementation. | |
[ +0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1. | |
[ +0.000000] Tasks RCU enabled. | |
[ +0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1 | |
[ +0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ +0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts | |
[ +0.000000] OMAP clockevent source: timer2 at 24000000 Hz | |
[ +0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ +0.000021] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ +0.000011] OMAP clocksource: timer1 at 24000000 Hz | |
[ +0.002200] timer_probe: no matching timers found | |
[ +0.000365] Console: colour dummy device 80x30 | |
[ +0.000032] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0' | |
[ +0.000005] This ensures that you still see kernel messages. Please | |
[ +0.000005] update your kernel commandline. | |
[ +0.000027] Calibrating delay loop... 995.32 BogoMIPS (lpj=1990656) | |
[ +0.018298] pid_max: default: 32768 minimum: 301 | |
[ +0.000271] Security Framework initialized | |
[ +0.000016] Yama: becoming mindful. | |
[ +0.000040] AppArmor: AppArmor disabled by boot time parameter | |
[ +0.000075] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ +0.000013] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) | |
[ +0.001047] CPU: Testing write buffer coherency: ok | |
[ +0.000067] CPU0: Spectre v2: using BPIALL workaround | |
[ +0.000466] CPU0: thread -1, cpu 0, socket -1, mpidr 0 | |
[ +0.014096] Setting up static identity map for 0x80100000 - 0x80100060 | |
[ +0.007908] Hierarchical SRCU implementation. | |
[ +0.011129] EFI services will not be available. | |
[ +0.004878] smp: Bringing up secondary CPUs ... | |
[ +0.000015] smp: Brought up 1 node, 1 CPU | |
[ +0.000011] SMP: Total of 1 processors activated (995.32 BogoMIPS). | |
[ +0.000007] CPU: All CPU(s) started in SVC mode. | |
[ +0.001683] devtmpfs: initialized | |
[ +0.038664] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3 | |
[ +0.000459] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns | |
[ +0.000025] futex hash table entries: 256 (order: 2, 16384 bytes) | |
[ +0.003940] xor: measuring software checksum speed | |
[ +0.039177] arm4regs : 1217.000 MB/sec | |
[ +0.039987] 8regs : 1091.000 MB/sec | |
[ +0.039999] 32regs : 1170.000 MB/sec | |
[ +0.040000] neon : 1673.000 MB/sec | |
[ +0.000007] xor: using function: neon (1673.000 MB/sec) | |
[ +0.000019] pinctrl core: initialized pinctrl subsystem | |
[ +0.001246] NET: Registered protocol family 16 | |
[ +0.003957] DMA: preallocated 1024 KiB pool for atomic coherent allocations | |
[ +0.086844] omap_hwmod: debugss: _wait_target_disable failed | |
[ +0.040785] cpuidle: using governor menu | |
[ +0.007235] OMAP GPIO hardware version 0.1 | |
[ +0.025912] No ATAGs? | |
[ +0.000021] hw-breakpoint: debug architecture 0x4 unsupported. | |
[ +0.001471] omap4_sram_init:Unable to allocate sram needed to handle errata I688 | |
[ +0.000014] omap4_sram_init:Unable to get sram pool needed to handle errata I688 | |
[ +0.024641] raid6: using algorithm neonx8 gen() 0 MB/s | |
[ +0.000013] raid6: .... xor() 0 MB/s, rmw enabled | |
[ +0.000008] raid6: using neon recovery algorithm | |
[ +0.007997] edma 49000000.edma: TI EDMA DMA engine driver | |
[ +0.007062] SCSI subsystem initialized | |
[ +0.000971] libata version 3.00 loaded. | |
[ +0.000282] usbcore: registered new interface driver usbfs | |
[ +0.000070] usbcore: registered new interface driver hub | |
[ +0.000119] usbcore: registered new device driver usb | |
[ +0.000910] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe | |
[ +0.000980] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz | |
[ +0.001323] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz | |
[ +0.000489] media: Linux media interface: v0.10 | |
[ +0.000066] Linux video capture interface: v2.00 | |
[ +0.000172] pps_core: LinuxPPS API ver. 1 registered | |
[ +0.000007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> | |
[ +0.000022] PTP clock support registered | |
[ +0.000666] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400 | |
[ +0.003002] FPGA manager framework | |
[ +0.000087] Advanced Linux Sound Architecture Driver Initialized. | |
[ +0.000650] NetLabel: Initializing | |
[ +0.000010] NetLabel: domain hash size = 128 | |
[ +0.000006] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO | |
[ +0.000080] NetLabel: unlabeled traffic allowed by default | |
[ +0.003404] clocksource: Switched to clocksource timer1 | |
[ +0.141296] VFS: Disk quotas dquot_6.6.0 | |
[ +0.000136] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ +0.012713] NET: Registered protocol family 2 | |
[ +0.000904] TCP established hash table entries: 4096 (order: 2, 16384 bytes) | |
[ +0.000048] TCP bind hash table entries: 4096 (order: 3, 32768 bytes) | |
[ +0.000058] TCP: Hash tables configured (established 4096 bind 4096) | |
[ +0.000118] UDP hash table entries: 256 (order: 1, 8192 bytes) | |
[ +0.000023] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes) | |
[ +0.000217] NET: Registered protocol family 1 | |
[ +0.009036] RPC: Registered named UNIX socket transport module. | |
[ +0.000012] RPC: Registered udp transport module. | |
[ +0.000005] RPC: Registered tcp transport module. | |
[ +0.000005] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ +0.000789] Unpacking initramfs... | |
[ +0.366706] random: fast init done | |
[ +0.042993] Freeing initrd memory: 7304K | |
[ +0.000652] hw perfevents: no interrupt-affinity property for /pmu, guessing. | |
[ +0.000415] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available | |
[ +0.002070] audit: initializing netlink subsys (disabled) | |
[ +0.001244] audit: type=2000 audit(1.064:1): state=initialized audit_enabled=0 res=1 | |
[ +0.000131] workingset: timestamp_bits=14 max_order=17 bucket_order=3 | |
[ +0.006070] zbud: loaded | |
[ +0.007664] NFS: Registering the id_resolver key type | |
[ +0.000042] Key type id_resolver registered | |
[ +0.000006] Key type id_legacy registered | |
[ +0.000017] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ +0.000380] fuse init (API version 7.26) | |
[ +0.009823] Key type asymmetric registered | |
[ +0.000015] Asymmetric key parser 'x509' registered | |
[ +0.000126] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) | |
[ +0.004602] io scheduler noop registered | |
[ +0.000012] io scheduler deadline registered | |
[ +0.000297] io scheduler cfq registered (default) | |
[ +0.000010] io scheduler mq-deadline registered | |
[ +0.002316] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568 | |
[ +0.012535] gpio-of-helper ocp:cape-universal: ready | |
[ +0.011200] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle | |
[ +0.002484] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled | |
[ +0.003741] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 38, base_baud = 3000000) is a 8250 | |
[ +0.011852] console [ttyS0] enabled | |
[ +0.001160] 48022000.serial: ttyS1 at MMIO 0x48022000 (irq = 39, base_baud = 3000000) is a 8250 | |
[ +0.001013] 48024000.serial: ttyS2 at MMIO 0x48024000 (irq = 40, base_baud = 3000000) is a 8250 | |
[ +0.000964] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 41, base_baud = 3000000) is a 8250 | |
[ +0.001170] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 42, base_baud = 3000000) is a 8250 | |
[ +0.000972] 481aa000.serial: ttyS5 at MMIO 0x481aa000 (irq = 43, base_baud = 3000000) is a 8250 | |
[ +0.003672] omap_rng 48310000.rng: Random Number Generator ver. 20 | |
[ +0.001242] [drm] Initialized vgem 1.0.0 20120112 for vgem on minor 0 | |
[ +0.000110] usbcore: registered new interface driver udl | |
[ +0.005737] random: crng init done | |
[ +0.008568] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000288] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000258] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000218] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000538] eqep 48300180.eqep: ver. 1.0 | |
[ +0.000189] eqep 48300180.eqep: count_mode:0 | |
[ +0.000011] eqep 48300180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48300180.eqep: invert_qb:1 | |
[ +0.000009] eqep 48300180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48300180.eqep: invert_qs:0 | |
[ +0.000009] eqep 48300180.eqep: swap_inputs:0 | |
[ +0.000008] eqep 48300180.eqep: QDECCTL:0x0180 | |
[ +0.000009] eqep 48300180.eqep: QPOSINIT:0x00000000 | |
[ +0.000007] eqep 48300180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48300180.eqep: QPOSCNT:0x00000000 | |
[ +0.000009] eqep 48300180.eqep: omit_interrupt:0 | |
[ +0.000007] eqep 48300180.eqep: QEINT:0x0800 | |
[ +0.000007] eqep 48300180.eqep: QUPRD:0x05f5e100 | |
[ +0.000008] eqep 48300180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48300180.eqep: QEPCTL:0x009e read | |
[ +0.000024] eqep 48300180.eqep: irq:145, clk_rate:100000000 | |
[ +0.000242] eqep 48302180.eqep: ver. 1.0 | |
[ +0.000130] eqep 48302180.eqep: count_mode:0 | |
[ +0.000011] eqep 48302180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48302180.eqep: invert_qb:1 | |
[ +0.000008] eqep 48302180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48302180.eqep: invert_qs:0 | |
[ +0.000008] eqep 48302180.eqep: swap_inputs:0 | |
[ +0.000007] eqep 48302180.eqep: QDECCTL:0x0180 | |
[ +0.000008] eqep 48302180.eqep: QPOSINIT:0x00000000 | |
[ +0.000008] eqep 48302180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48302180.eqep: QPOSCNT:0x00000000 | |
[ +0.000008] eqep 48302180.eqep: omit_interrupt:0 | |
[ +0.000007] eqep 48302180.eqep: QEINT:0x0800 | |
[ +0.000007] eqep 48302180.eqep: QUPRD:0x05f5e100 | |
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48302180.eqep: QEPCTL:0x009e read | |
[ +0.000019] eqep 48302180.eqep: irq:147, clk_rate:100000000 | |
[ +0.000201] eqep 48304180.eqep: ver. 1.0 | |
[ +0.000115] eqep 48304180.eqep: count_mode:0 | |
[ +0.000011] eqep 48304180.eqep: invert_qa:1 | |
[ +0.000008] eqep 48304180.eqep: invert_qb:1 | |
[ +0.000008] eqep 48304180.eqep: invert_qi:0 | |
[ +0.000008] eqep 48304180.eqep: invert_qs:0 | |
[ +0.000008] eqep 48304180.eqep: swap_inputs:0 | |
[ +0.000008] eqep 48304180.eqep: QDECCTL:0x0180 | |
[ +0.000007] eqep 48304180.eqep: QPOSINIT:0x00000000 | |
[ +0.000007] eqep 48304180.eqep: QPOSMAX:0xffffffff | |
[ +0.000007] eqep 48304180.eqep: QPOSCNT:0x00000000 | |
[ +0.000010] eqep 48304180.eqep: omit_interrupt:0 | |
[ +0.000006] eqep 48304180.eqep: QEINT:0x0800 | |
[ +0.000008] eqep 48304180.eqep: QUPRD:0x05f5e100 | |
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e write | |
[ +0.000007] eqep 48304180.eqep: QEPCTL:0x009e read | |
[ +0.000018] eqep 48304180.eqep: irq:149, clk_rate:100000000 | |
[ +0.030283] libphy: Fixed MDIO Bus: probed | |
[ +0.000854] CAN device driver interface | |
[ +0.001443] c_can_platform 481cc000.can: c_can_platform device registered (regs=fa1cc000, irq=50) | |
[ +0.000968] c_can_platform 481d0000.can: c_can_platform device registered (regs=fa1d0000, irq=51) | |
[ +0.054626] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6, bus freq 1000000 | |
[ +0.000018] davinci_mdio 4a101000.mdio: detected phy mask fffffffe | |
[ +0.001036] MDIO: davinci_mdio: dt: updated phy_id[0] from phy_mask[fffffffe] | |
[ +0.014951] libphy: 4a101000.mdio: probed | |
[ +0.000028] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720 | |
[ +0.001105] cpsw 4a100000.ethernet: Detected MACID = 40:bd:32:dd:c7:10 | |
[ +0.000153] cpsw 4a100000.ethernet: initialized cpsw ale version 1.4 | |
[ +0.000010] cpsw 4a100000.ethernet: ALE Table size 1024 | |
[ +0.000055] cpsw 4a100000.ethernet: cpts: overflow check period 1250 (jiffies) | |
[ +0.003864] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
[ +0.000062] ehci-platform: EHCI generic platform driver | |
[ +0.000398] ehci-omap: OMAP-EHCI Host Controller driver | |
[ +0.000935] usbcore: registered new interface driver usb-storage | |
[ +0.003611] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator | |
[ +0.003588] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator | |
[ +0.004518] musb-hdrc musb-hdrc.1: MUSB HDRC host driver | |
[ +0.000042] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1 | |
[ +0.000308] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ +0.000011] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ +0.000008] usb usb1: Product: MUSB HDRC host driver | |
[ +0.000007] usb usb1: Manufacturer: Linux 4.14.108-ti-r107 musb-hcd | |
[ +0.000007] usb usb1: SerialNumber: musb-hdrc.1 | |
[ +0.000933] hub 1-0:1.0: USB hub found | |
[ +0.000083] hub 1-0:1.0: 1 port detected | |
[ +0.012780] omap_rtc 44e3e000.rtc: registered as rtc0 | |
[ +0.001488] i2c /dev entries driver | |
[ +0.001202] Driver for 1-wire Dallas network protocol. | |
[ +0.003548] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec | |
[ +0.000620] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) | |
[ +0.001640] cpuidle: enable-method property 'ti,am3352' found operations | |
[ +0.000880] sdhci: Secure Digital Host Controller Interface driver | |
[ +0.000009] sdhci: Copyright(c) Pierre Ossman | |
[ +0.000836] omap_hsmmc 48060000.mmc: Got CD GPIO | |
[ +0.076486] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ +0.001348] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ +0.002201] mmc0: Problem switching card into high-speed mode! | |
[ +0.000147] ledtrig-cpu: registered to indicate activity on CPUs | |
[ +0.000557] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2 | |
[ +0.000294] mmc0: new SDHC card at address 0001 | |
[ +0.001338] mmcblk0: mmc0:0001 SD 29.1 GiB | |
[ +0.002186] mmcblk0: p1 | |
[ +0.000778] omap-aes 53500000.aes: will run requests pump with realtime priority | |
[ +0.006101] omap-sham 53100000.sham: hw accel on OMAP rev 4.3 | |
[ +0.007521] hidraw: raw HID events driver (C) Jiri Kosina | |
[ +0.000837] usbcore: registered new interface driver usbhid | |
[ +0.000009] usbhid: USB HID core driver | |
[ +0.000400] remoteproc remoteproc0: wkup_m3 is available | |
[ +0.010813] wireguard: WireGuard 0.0.20190227 loaded. See www.wireguard.com for information. | |
[ +0.000013] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. | |
[ +0.000978] NET: Registered protocol family 10 | |
[ +0.005796] Segment Routing with IPv6 | |
[ +0.000083] mip6: Mobile IPv6 | |
[ +0.000020] NET: Registered protocol family 17 | |
[ +0.000018] can: controller area network core (rev 20170425 abi 9) | |
[ +0.000086] NET: Registered protocol family 29 | |
[ +0.000215] Key type dns_resolver registered | |
[ +0.000008] mpls_gso: MPLS GSO support | |
[ +0.000395] omap_voltage_late_init: Voltage driver support not added | |
[ +0.007209] PM: Cannot get wkup_m3_ipc handle | |
[ +0.004667] ThumbEE CPU extension supported. | |
[ +0.000027] Registering SWP/SWPB emulation handler | |
[ +0.001007] registered taskstats version 1 | |
[ +0.000132] zswap: loaded using pool lzo/zbud | |
[ +0.002645] Btrfs loaded, crc32c=crc32c-generic | |
[ +0.000100] ima: No TPM chip found, activating TPM-bypass! (rc=-19) | |
[ +0.000026] ima: Allocated hash algorithm: sha256 | |
[ +0.007664] mmc1: new high speed MMC card at address 0001 | |
[ +0.002831] mmcblk1: mmc1:0001 M62704 3.56 GiB | |
[ +0.003473] mmcblk1boot0: mmc1:0001 M62704 partition 1 2.00 MiB | |
[ +0.000624] mmcblk1boot1: mmc1:0001 M62704 partition 2 2.00 MiB | |
[ +0.000583] mmcblk1rpmb: mmc1:0001 M62704 partition 3 512 KiB | |
[ +0.001531] mmcblk1: p1 | |
[ +0.140954] tda998x 0-0070: found TDA19988 | |
[ +0.001735] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops) | |
[ +0.000035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). | |
[ +0.000006] [drm] No driver support for vblank timestamp query. | |
[ +0.000510] [drm] Cannot find any crtc or sizes | |
[ +0.000730] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 1 | |
[ +0.014656] input: tps65217_pwr_but as /devices/platform/ocp/44e0b000.i2c/i2c-0/0-0024/tps65217-pwrbutton/input/input0 | |
[ +0.000605] tps65217 0-0024: TPS65217 ID 0xe version 1.2 | |
[ +0.000513] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write | |
[ +0.000113] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz | |
[ +0.001688] remoteproc remoteproc0: powering up wkup_m3 | |
[ +0.000120] remoteproc remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217168 | |
[ +0.004224] remoteproc remoteproc0: remote processor wkup_m3 is now up | |
[ +0.000019] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x193 | |
[ +0.002991] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: no source widget found for Playback | |
[ +0.008974] hdmi-audio-codec hdmi-audio-codec.1.auto: ASoC: Failed to add route Playback -> direct -> TX | |
[ +0.010391] asoc-simple-card sound: i2s-hifi <-> 48038000.mcasp mapping ok | |
[ +0.002359] PM: bootloader does not support rtc-only! | |
[ +0.001220] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) | |
[ +0.000018] of_cfs_init | |
[ +0.000168] of_cfs_init: OK | |
[ +0.001371] ALSA device list: | |
[ +0.000014] #0: TI BeagleBone Black | |
[ +0.007113] Freeing unused kernel memory: 1024K | |
[ +0.161693] usb 1-1: new high-speed USB device number 2 using musb-hdrc | |
[ +0.148388] usb 1-1: New USB device found, idVendor=1d50, idProduct=60a1 | |
[ +0.000019] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
[ +0.000008] usb 1-1: Product: AIRSPY | |
[ +0.000007] usb 1-1: Manufacturer: www.airspy.com | |
[ +0.000007] usb 1-1: SerialNumber: AIRSPY SN:26A464DC286C2693 | |
[ +0.648026] [drm] Cannot find any crtc or sizes | |
[ +7.341459] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
[ +1.204552] systemd[1]: System time before build time, advancing clock. | |
[ +0.157803] ip_tables: (C) 2000-2006 Netfilter Core Team | |
[ +0.038044] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) | |
[ +0.000673] systemd[1]: Detected architecture arm. | |
[ +0.019200] systemd[1]: Set hostname to <arm>. | |
[ +1.187907] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ +0.000494] systemd[1]: Reached target Remote File Systems. | |
[ +0.001927] systemd[1]: Created slice User and Session Slice. | |
[ +0.000563] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ +0.001401] systemd[1]: Created slice System Slice. | |
[ +0.000694] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ +0.000490] systemd[1]: Listening on udev Kernel Socket. | |
[ +1.510807] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro | |
[ +0.467259] systemd-journald[544]: Received request to flush runtime journal from PID 1 | |
[ +4.413490] Bluetooth: Core ver 2.22 | |
[ +0.000157] NET: Registered protocol family 31 | |
[ +0.000008] Bluetooth: HCI device and connection manager initialized | |
[ +0.000031] Bluetooth: HCI socket layer initialized | |
[ +0.000017] Bluetooth: L2CAP socket layer initialized | |
[ +0.000049] Bluetooth: SCO socket layer initialized | |
[ +0.552033] nf_conntrack version 0.5.0 (8192 buckets, 32768 max) | |
[Jul 2 04:38] net eth0: initializing cpsw version 1.12 (0) | |
[ +0.108616] SMSC LAN8710/LAN8720 4a101000.mdio:00: attached PHY driver [SMSC LAN8710/LAN8720] (mii_bus:phy_addr=4a101000.mdio:00, irq=POLL) | |
[ +0.054992] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready | |
[ +2.558846] using random self ethernet address | |
[ +0.000020] using random host ethernet address | |
[ +0.125966] using random self ethernet address | |
[ +0.000020] using random host ethernet address | |
[ +0.452082] usb0: HOST MAC 40:bd:32:dd:c7:11 | |
[ +0.002797] usb0: MAC 40:bd:32:dd:c7:12 | |
[ +0.011252] usb1: HOST MAC 40:bd:32:dd:c7:14 | |
[ +0.004677] usb1: MAC 40:bd:32:dd:c7:15 | |
[ +0.597074] configfs-gadget gadget: high-speed config #1: c | |
[ +0.183661] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready | |
[ +0.223207] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready | |
[ +0.097675] IPv6: ADDRCONF(NETDEV_UP): usb1: link is not ready | |
[ +6.758445] airspy 1-1:1.0: Board ID: 00 | |
[ +0.000021] airspy 1-1:1.0: Firmware version: AirSpy MINI v1.0.0-rc10-0-g946184a 2016-09-19 | |
[ +0.013486] airspy 1-1:1.0: Registered as swradio0 | |
[ +0.000020] airspy 1-1:1.0: SDR API is still slightly experimental and functionality changes may follow | |
[ +0.000265] usbcore: registered new interface driver airspy | |
[Jul 2 04:44] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1 | |
[ +0.103376] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1 | |
[ +1.236144] musb_ep_program 916: broken !rx_reinit, ep2 csr 0003 | |
[ +0.006071] musb_host_rx 1965: Rx interrupt with no errors or packet! | |
[ +0.006563] musb_host_rx 1965: Rx interrupt with no errors or packet! | |
ubuntu@arm:~$ |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[Jul 2 04:44] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1 | |
[ +0.103376] usb 1-1: usbfs: interface 0 claimed by usbfs while 'python3' sets config #1 | |
[ +1.236144] musb_ep_program 916: broken !rx_reinit, ep2 csr 0003 | |
[ +0.006071] musb_host_rx 1965: Rx interrupt with no errors or packet! | |
[ +0.006563] musb_host_rx 1965: Rx interrupt with no errors or packet! |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ubuntu@arm:~$ SoapySDRUtil --rate=3e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 3 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
0.281648 Msps 1.12659 MBps | |
0.279474 Msps 1.1179 MBps | |
0.286524 Msps 1.14609 MBps | |
/^C | |
ubuntu@arm:~$ SoapySDRUtil --rate=6e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 6 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
0.218708 Msps 0.874832 MBps | |
0.210391 Msps 0.841564 MBps | |
0.239425 Msps 0.957699 MBps | |
/^C | |
ubuntu@arm:~$ SoapySDRUtil --rate=0.3e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 0.3 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
0.270995 Msps 1.08398 MBps | |
0.280043 Msps 1.12017 MBps | |
0.285095 Msps 1.14038 MBps | |
/^C | |
ubuntu@arm:~$ SoapySDRUtil --rate=0.2e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 0.2 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
0.271759 Msps 1.08704 MBps | |
0.277609 Msps 1.11043 MBps | |
0.277345 Msps 1.10938 MBps |
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
ubuntu@e480:~$ SoapySDRUtil --rate=3e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 3 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
2.99428 Msps 11.9771 MBps | |
2.99857 Msps 11.9943 MBps | |
2.99843 Msps 11.9937 MBps | |
-^C | |
ubuntu@e480:~$ SoapySDRUtil --rate=6e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 6 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
5.98818 Msps 23.9527 MBps | |
5.99616 Msps 23.9846 MBps | |
5.99551 Msps 23.982 MBps | |
-^C | |
ubuntu@e480:~$ SoapySDRUtil --rate=0.3e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 0.3 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
5.98507 Msps 23.9403 MBps | |
5.9938 Msps 23.9752 MBps | |
5.9956 Msps 23.9824 MBps | |
\^C | |
ubuntu@e480:~$ SoapySDRUtil --rate=0.2e6 --direction=RX | |
###################################################### | |
## Soapy SDR -- the SDR abstraction library ## | |
###################################################### | |
[INFO] Using format CS16. | |
Stream format: CS16 | |
Num channels: 1 | |
Element size: 4 bytes | |
Begin RX rate test at 0.2 Msps | |
Starting stream loop, press Ctrl+C to exit... | |
5.99154 Msps 23.9661 MBps | |
5.99301 Msps 23.972 MBps | |
5.99612 Msps 23.9845 MBps | |
-^C |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
1, Beagle bone black boot and it was inserted airspy by USB.
2. I check dmeg command
- log1_boot_and_inserted_airspy_dmesg_--reltime-1.txt
3. execute simaplesoapy command. ($ python3 test_simplesoapy.py)
- log2_simeplesopay_airspy.txt
4. I check dmeg command again
- log3_after_simplesoapy_dmesg_--reltime-1.txt
- log4_error_simplesoapy.txt (incremental against log_boot_and_inserted_airspy_dmesg_--reltime-1.txt)