Skip to content

Instantly share code, notes, and snippets.

@tetsu-koba
Created May 26, 2011 01:32
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save tetsu-koba/992377 to your computer and use it in GitHub Desktop.
Save tetsu-koba/992377 to your computer and use it in GitHub Desktop.
Kernel boot log of Xperia PLAY
<5>[ 0.000000] Linux version 2.6.32.9-perf (SEMCUser@SEMCHost) (gcc version 4.4.3 (GCC) ) #1 PREEMPT Sat Feb 26 23:20:44 2011
<4>[ 0.000000] CPU: ARMv7 Processor [511f00f1] revision 1 (ARMv7), cr=10c53c7f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
<4>[ 0.000000] Machine: zeus
<6>[ 0.000000] Partition (from atag) system -- Offset:2e4 Size:9c4
<6>[ 0.000000] Partition (from atag) appslog -- Offset:1f90 Size:50
<6>[ 0.000000] Partition (from atag) cache -- Offset:1888 Size:708
<6>[ 0.000000] Partition (from atag) userdata -- Offset:ca8 Size:be0
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<7>[ 0.000000] On node 0 totalpages: 116736
<7>[ 0.000000] Normal zone: 2556 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 114180 pages, LIFO batch:31
<6>[ 0.000000] allocating 5242880 bytes at 80edc000 (10dc000 physical) for sf pmem arena
<6>[ 0.000000] allocating 5242880 bytes at 813dc000 (15dc000 physical) for fb
<6>[ 0.000000] allocating 2097152 bytes at 818dc000 (1adc000 physical) for KGSL
<6>[ 0.000000] allocating 25165824 bytes at 81adc000 (1cdc000 physical) for adsp pmem arena
<6>[ 0.000000] allocating 2097152 bytes at 832dc000 (34dc000 physical) for audio pmem arena
<6>[ 0.000000] allocating 6291456 bytes at 83500000 (3700000 physical) for kernel ebi1 pmem arena
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 114180
<5>[ 0.000000] Kernel command line: console=ttyMSM2,115200n8 androidboot.hardware=semc totalmem=0x200 startup=0x00000001 serialno=CB5A1D9FE3 bt0.ieee_addr=30:17:c8:7f:fb:00 wifi0.eth_addr=30:17:c8:e6:52:55
<6>[ 0.000000] USB serial number: 43423541314439464533
<6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[ 0.000000] Memory: 60MB 140MB 256MB = 456MB total
<5>[ 0.000000] Memory: 407552k/407800k available, 59144k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] vmalloc : 0xd0000000 - 0xf0000000 ( 512 MB)
<5>[ 0.000000] lowmem : 0x80000000 - 0xcfe00000 (1278 MB)
<5>[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
<5>[ 0.000000] .init : 0x80008000 - 0x80034000 ( 176 kB)
<5>[ 0.000000] .text : 0x80034000 - 0x806e4000 (6848 kB)
<5>[ 0.000000] .data : 0x80706000 - 0x8077cfc8 ( 476 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] NR_IRQS:566
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000152] Calibrating delay loop... 511.18 BogoMIPS (lpj=2555904)
<4>[ 0.240417] Mount-cache hash table entries: 512
<6>[ 0.240844] CPU: Testing write buffer coherency: ok
<6>[ 0.242950] NET: Registered protocol family 16
<6>[ 0.243041] NPA: Init done.
<6>[ 0.243103] NPA Remote: Init done.
<6>[ 2.134002] Zeus HWID: 0xf (PQ)
<3>[ 2.134368] Enabled VREG "gp4" at 2850 mV
<3>[ 2.134368] Disabled VREG "gp3"
<3>[ 2.134368] Disabled VREG "gp5"
<3>[ 2.134582] Enabled VREG "wlan" at 1800 mV
<3>[ 2.134765] Enabled VREG "gp10" at 2800 mV
<3>[ 2.134979] Enabled VREG "gp13" at 3000 mV
<3>[ 2.153900] socinfo_init: Can't find SMEM_HW_SW_BUILD_ID
<3>[ 2.153930] msm7x30_init: socinfo_init() failed!
<6>[ 2.153930] Clock ownership
<6>[ 2.153930] GLBL : 07d82110
<6>[ 2.153930] APPS : 00000000 00000000 00000000
<6>[ 2.153961] ROW : 00000000 00000000
<6>[ 2.154083] acpu_clock_init()
<6>[ 2.154663] ACPU running at 768000 KHz
<6>[ 2.156219] ram_console: got buffer at 4ffe0000, size 20000
<6>[ 2.156250] ram_console: no valid data in buffer (sig = 0x15118556)
<6>[ 2.156372] console [ram-1] enabled
<6>[ 2.156768] snddev_poweramp_gpio_init
<6>[ 2.156829] msm_snddev_poweramp_off: power off amplifier
<6>[ 2.156829] msm_hac_amp_off: power off HAC amplifier
<6>[ 2.158996] aux_pcm_gpio_init
<6>[ 2.159149] Vibrator: enable voltage 3000(mV)
<5>[ 2.159790] pm8058_init: i2c_add_driver: rc = 0
<6>[ 2.160461] pm8058_probe: PMIC revision: E3
<6>[ 2.161895] pm8058_gpio_probe: gpiochip_add(): rc=0
<6>[ 2.162200] pm8058_mpp_probe: gpiochip_add(): rc=0
<4>[ 2.167907] bio: create slab <bio-0> at 0
<5>[ 2.168762] SCSI subsystem initialized
<6>[ 2.168945] msm_i2c_probe
<3>[ 2.169036] remote_spinlock_dal_init: DAL remote lock "I2C02000021" not found.
<6>[ 2.169067] msm_i2c_probe: clk_ctl 315, 400000 Hz
<3>[ 2.169708] Enabled VREG "gp7" at 1800 mV
<6>[ 2.169799] msm_i2c_probe
<6>[ 2.169860] msm_i2c_probe: clk_ctl 315, 400000 Hz
<6>[ 2.170745] Bluetooth: Core ver 2.15
<6>[ 2.170837] NET: Registered protocol family 31
<6>[ 2.170867] Bluetooth: HCI device and connection manager initialized
<6>[ 2.170867] Bluetooth: HCI socket layer initialized
<6>[ 2.170989] Switching to clocksource gp_timer
<6>[ 2.175201] NET: Registered protocol family 2
<6>[ 2.175323] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 2.175659] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[ 2.175994] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 2.176177] TCP: Hash tables configured (established 16384 bind 16384)
<6>[ 2.176177] TCP reno registered
<6>[ 2.176330] NET: Registered protocol family 1
<6>[ 2.176605] RPC: Registered udp transport module.
<6>[ 2.176605] RPC: Registered tcp transport module.
<6>[ 2.176635] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 2.176788] Trying to unpack rootfs image as initramfs...
<6>[ 2.231689] Freeing initrd memory: 876K
<6>[ 2.232727] smd probe
<6>[ 2.232757] smd_core_init()
<6>[ 2.232818] smd_core_init() done
<6>[ 2.232818] smd_alloc_loopback_channel: 'local_loopback' cid=100
<6>[ 2.233062] last_amsslog: Log not present
<6>[ 2.233367] smd_alloc_channel() 'DS' cid=0
<6>[ 2.233489] smd_alloc_channel() 'DIAG' cid=1
<6>[ 2.233551] smd_alloc_channel() 'RPCCALL' cid=2
<6>[ 2.233642] smd_alloc_channel() 'DATA1' cid=7
<6>[ 2.233703] smd_alloc_channel() 'DATA2' cid=8
<6>[ 2.233764] smd_alloc_channel() 'DATA3' cid=9
<6>[ 2.233856] smd_alloc_channel() 'DATA4' cid=10
<6>[ 2.233917] smd_alloc_channel() 'DATA5' cid=11
<6>[ 2.234008] smd_alloc_channel() 'DATA6' cid=12
<6>[ 2.234069] smd_alloc_channel() 'DATA7' cid=13
<6>[ 2.234130] smd_alloc_channel() 'DATA8' cid=14
<6>[ 2.234222] smd_alloc_channel() 'DATA9' cid=15
<6>[ 2.234283] smd_alloc_channel() 'DATA11' cid=17
<6>[ 2.234375] smd_alloc_channel() 'DATA12' cid=18
<6>[ 2.234436] smd_alloc_channel() 'DAL00' cid=38
<6>[ 2.234527] smd_alloc_channel() 'DATA5_CNTL' cid=39
<6>[ 2.234619] smd_alloc_channel() 'DATA6_CNTL' cid=40
<6>[ 2.234680] smd_alloc_channel() 'DATA7_CNTL' cid=41
<6>[ 2.234741] smd_alloc_channel() 'DATA8_CNTL' cid=42
<6>[ 2.234832] smd_alloc_channel() 'DATA9_CNTL' cid=43
<6>[ 2.234893] smd_alloc_channel() 'DATA12_CNTL' cid=44
<3>[ 2.235046] Notify: smsm init
<6>[ 2.237152] SMD Packet Port Driver Initialized.
<6>[ 2.237640] SMD: ch 2 0 -> 1
<6>[ 2.237854] SMD: ch 2 1 -> 2
<6>[ 2.238067] [afe.c:afe_init] AFE driver init
<6>[ 2.239074] [audpp.c:audpp_probe] Number of decoder supported 5
<6>[ 2.239105] [audpp.c:audpp_probe] Number of concurrency supported 7
<6>[ 2.239105] [audpp.c:audpp_probe] module_name:AUDPLAY4TASK
<6>[ 2.239135] [audpp.c:audpp_probe] queueid:17
<6>[ 2.239135] [audpp.c:audpp_probe] decid:4
<6>[ 2.239135] [audpp.c:audpp_probe] nr_codec_support:1
<6>[ 2.239166] [audpp.c:audpp_probe] module_name:AUDPLAY3TASK
<6>[ 2.239166] [audpp.c:audpp_probe] queueid:16
<6>[ 2.239196] [audpp.c:audpp_probe] decid:3
<6>[ 2.239196] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 2.239196] [audpp.c:audpp_probe] module_name:AUDPLAY2TASK
<6>[ 2.239227] [audpp.c:audpp_probe] queueid:15
<6>[ 2.239227] [audpp.c:audpp_probe] decid:2
<6>[ 2.239227] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 2.239257] [audpp.c:audpp_probe] module_name:AUDPLAY1TASK
<6>[ 2.239257] [audpp.c:audpp_probe] queueid:14
<6>[ 2.239288] [audpp.c:audpp_probe] decid:1
<6>[ 2.239288] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 2.239288] [audpp.c:audpp_probe] module_name:AUDPLAY0TASK
<6>[ 2.239318] [audpp.c:audpp_probe] queueid:13
<6>[ 2.239318] [audpp.c:audpp_probe] decid:0
<6>[ 2.239318] [audpp.c:audpp_probe] nr_codec_support:11
<6>[ 2.240020] [snddev_ecodec.c:snddev_ecodec_init] snddev_ecodec_init
<6>[ 2.243621] SMD: ch 38 0 -> 1
<6>[ 2.243713] SMD: ch 38 1 -> 2
<3>[ 2.245727] rpcrouter: Server create rejected, version = 0, program = 3000001f
<6>[ 2.254119] [adsp.c:adsp_rtos_mtoa_cb] INIT_INFO Event
<6>[ 2.254211] [adsp.c:adsp_init] msm_adsp -- 0
<6>[ 2.254547] [lpa.c:lpa_probe] lpa probe
<6>[ 2.254791] audio_mvs_init:
<6>[ 2.255035] input: msm_pmic_pwr_key as /devices/virtual/input/input0
<6>[ 2.255462] input: keypad-pmic-zeus as /devices/i2c-6/6-0000/keypad-pmic-zeus.0/input/input1
<6>[ 2.257263] semc_battery_data: probe
<6>[ 2.258148] simple_remote_pf simple_remote_pf.0: Successfully registered
<6>[ 2.259002] ashmem: initialized
<4>[ 2.260345] yaffs Mar 1 2011 13:36:18 Installing.
<6>[ 2.260406] msgmni has been set to 798
<6>[ 2.263153] alg: No test for stdrng (krng)
<6>[ 2.263214] io scheduler noop registered
<6>[ 2.263214] io scheduler deadline registered (default)
<6>[ 2.264526] Registered led device: lcd-backlight
<6>[ 2.264617] Registered led device: red
<6>[ 2.264678] Registered led device: green
<6>[ 2.264770] Registered led device: blue
<6>[ 2.264984] msm_fb_probe: phy_Addr = 0x15dc000 virt = 0xd0800000
<6>[ 2.265655] MDP HW Base phy_Address = 0xa3f00000 virt = 0xd0100000
<6>[ 2.265777] mdp_clk: mdp_clk=122880000
<6>[ 2.265777] mdp_hw_version: mdp_hw_revision=1
<6>[ 2.268280] mdp4_fetch_cfg: dmap=47 vg=c7
<6>[ 2.268737] primary mddi base phy_addr = 0xad600000 virt = 0xd003c000
<3>[ 2.279327] Enabled VREG "gp6" at 2850 mV
<3>[ 2.279541] Enabled VREG "gp9" at 1800 mV
<6>[ 2.292266] mddi_novatek_fwvga mddi_novatek_fwvga: Found TMD MDDI Type 2 (cut2)
<6>[ 2.292297] mddi_novatek_fwvga mddi_novatek_fwvga: Using MDDI type 2
<6>[ 2.292724] mdp4_display_intf_sel: 0xa
<6>[ 2.300872] FrameBuffer[0] 480x854 size=3410432 bytes is registered successfully!
<6>[ 2.488983] mdp4_overlay_pipe_alloc: pipe=8073bcc8 ndx=1
<6>[ 2.490661]
<6>[ 2.490661] msm_vidc_dec: Inside vid_dec_init()
<6>[ 2.490875]
<6>[ 2.490875] msm_vidc_dec: Inside vid_dec_vcd_init()
<6>[ 2.490905]
<6>[ 2.490936] msm_vidc_enc: Inside vid_enc_init()
<6>[ 2.491119]
<6>[ 2.491119] msm_vidc_enc: Inside vid_enc_vcd_init()
<3>[ 2.491149]
<3>[ 2.491149] err: Device config mismatch
<6>[ 2.496307] diagfwd initializing ..
<6>[ 2.496643] SMD: ch 1 0 -> 1
<6>[ 2.496673] diag opened SMD port ; r = 0
<6>[ 2.496765] SMD: ch 1 1 -> 2
<6>[ 2.496795] diagchar initializing ..
<6>[ 2.496978] diagchar initialized
<6>[ 2.497802] msm_serial: detected port #2
<6>[ 2.497894] msm_serial.2: ttyMSM2 at MMIO 0xacc00000 (irq = 71) is a MSM
<6>[ 2.497985] msm_serial: console setup on port #2
<6>[ 3.429870] console [ttyMSM2] enabled
<6>[ 3.433715] msm_serial: driver initialized
<6>[ 3.437713] msm_serial_hs.0: ttyHS0 at MMIO 0xa3300000 (irq = 73) is a MSM HS UART
<6>[ 3.445404] msm_serial_hs module loaded
<6>[ 3.450866] brd: module loaded
<6>[ 3.453826] loop: module loaded
<6>[ 3.455139] pmem: Initializing pmem (user-space) as cached
<6>[ 3.460815] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
<6>[ 3.466156] pmem: Initializing pmem_adsp (user-space) as non-cached
<6>[ 3.472900] pmem: Initializing pmem_audio (user-space) as non-cached
<5>[ 3.479095] pmic8058_nfc_probe: OK
<6>[ 3.483612] adie_codec_register_codec_operations: codec type 0
<6>[ 3.489013] SCSI Media Changer driver v0.25
<6>[ 3.492584] msm_nand_probe: phys addr 0xa0200000
<6>[ 3.496795] msm_nand_probe: Dual Nand Ctrl in ping-pong mode
<6>[ 3.502471] msm_nand_probe: dmac 0x7
<6>[ 3.506011] msm_nand_probe: allocated dma buffer at ffc2a000, dma_addr 4f004000
<6>[ 3.513885] status: e00020
<6>[ 3.515960] nandid: 55d1b32c maker 2c device b3
<6>[ 3.520507] ONFI probe : Found an ONFI compliant device MT29F8G16ADBDAH4 ,
<6>[ 3.527618] Found a supported NAND device
<6>[ 3.531616] NAND Id : 0x55d1b32c
<6>[ 3.534881] Buswidth : 16 Bits
<6>[ 3.538024] Density : 1024 MByte
<6>[ 3.541320] Pagesize : 2048 Bytes
<6>[ 3.544616] Erasesize: 131072 Bytes
<6>[ 3.548095] Oobsize : 64 Bytes
<6>[ 3.551239] 2nd_bbm : 0
<6>[ 3.553741] CFG0 Init : 0xa85408c0
<6>[ 3.557281] CFG1 Init : 0x0012745a
<6>[ 3.560852] ECCBUFCFG : 0x00000203
<5>[ 3.564422] Creating 4 MTD partitions on "msm_nand":
<5>[ 3.569366] 0x000005c80000-0x000019500000 : "system"
<5>[ 3.738800] 0x00003f200000-0x00003fc00000 : "appslog"
<5>[ 3.744567] 0x000031100000-0x00003f200000 : "cache"
<5>[ 3.863494] 0x000019500000-0x000031100000 : "userdata"
<4>[ 4.064300] spi_qsd spi_qsd.0: msm_spi_probe: DM mode not supported
<6>[ 4.065612] PPP generic driver version 2.4.2
<6>[ 4.065917] PPP Deflate Compression module registered
<6>[ 4.066009] PPP BSD Compression module registered
<6>[ 4.066802] PPP MPPE Compression module registered
<6>[ 4.066894] NET: Registered protocol family 24
<6>[ 4.066986] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
<6>[ 4.067169] CSLIP: code copyright 1989 Regents of the University of California.
<4>[ 4.067901] rmnet_init
<6>[ 4.072265] rmnet_init
<6>[ 4.074798] msm_otg_probe: rpc_connect(0)
<6>[ 4.076232] peripheral driver registered w/ tranceiver
<6>[ 4.080139] android_probe pdata: 8071ac68
<6>[ 4.084106] android_bind
<7>[ 4.086456] android_bind_config
<6>[ 4.089660] android_usb gadget: android_usb ready
<6>[ 4.094299] msm_hsusb msm_hsusb: registered gadget driver 'android_usb'
<6>[ 4.101043] f_serial init
<6>[ 4.103485] android_register_function modem
<6>[ 4.107635] android_register_function nmea
<6>[ 4.111755] f_adb init
<6>[ 4.114074] android_register_function adb
<6>[ 4.118072] f_mass_storage init
<6>[ 4.121185] android_register_function usb_mass_storage
<6>[ 4.126312] f_rndis init
<6>[ 4.128997] android_register_function rndis
<6>[ 4.133026] f_mtp init
<6>[ 4.135345] android_register_function mtp
<6>[ 4.139343] f_diag init
<6>[ 4.141784] android_register_function diag
<6>[ 4.145843] rndis_function_bind_config MAC: 02:07:7B:73:04:02
<4>[ 4.151611] android_usb gadget: using random self ethernet address
<4>[ 4.157745] android_usb gadget: using random host ethernet address
<6>[ 4.164276] usb0: MAC da:95:de:16:71:89
<6>[ 4.167724] usb0: HOST MAC 3e:f8:87:06:8a:a5
<6>[ 4.172088] mass_storage_bind_config
<6>[ 4.175659] fsg_probe pdata: 8071ce70
<6>[ 4.179626] android_usb gadget: Number of LUNs=2
<6>[ 4.183837] MTP:android mtp driver
<3>[ 4.187438] mtp gadget driver initialize - success
<6>[ 4.191986] adb_bind_config
<6>[ 4.195465] diag_function_add
<6>[ 4.198364] input: keypad-game-zeus as /devices/i2c-6/6-0000/pm8058-keypad/input/input2
<6>[ 4.310363] synaptics_touchpad: product 1, firmware revision 13, bootloader date 2011-02-18
<6>[ 4.311309] input: synaptics_touchpad as /devices/virtual/input/input3
<7>[ 4.311920] CY8CTMA300_TOUCH: V0.9b-mt built Mar 1 2011 13:36:16
<7>[ 4.312286] CY8CTMA300_TOUCH: SPI setup (requesting 1000000Hz) OK
<6>[ 4.471282] CY8CTMA300_TOUCH: TP_REG_FW 0x00
<6>[ 4.621124] msm_otg_suspend: usb in low power mode
<6>[ 4.631195] CY8CTMA300_TOUCH: Bootloader FW Ver 0.1
<6>[ 4.651245] CY8CTMA300_TOUCH: Application FW Ver 0.87
<6>[ 4.671203] CY8CTMA300_TOUCH: Silicon Revision E
<3>[ 4.671295] CY8CTMA300_TOUCH: firmware versions match.
<6>[ 4.811462] input: cy8ctma300_touch as /devices/platform/spi_qsd.0/spi0.0/input/input4
<6>[ 4.831054] CY8CTMA300_TOUCH: Device registered OK
<6>[ 4.832061] GPIO Input Driver: Start gpio inputs for keypad-zeus in interrupt mode
<6>[ 4.832244] GPIO Input Driver: Start gpio inputs for keypad-zeus in interrupt mode
<6>[ 4.832458] GPIO Input Driver: Start gpio inputs for keypad-zeus in interrupt mode
<6>[ 4.832794] input: keypad-zeus as /devices/virtual/input/input5
<6>[ 4.834442] input: bma150 as /devices/virtual/input/input6
<6>[ 4.835479] input: gp2ap002a00f as /devices/virtual/input/input7
<6>[ 4.836090] simple_remote simple_remote.0: **** Registering (headset) driver
<6>[ 4.840698] input: simple_remote as /devices/virtual/input/input8
<6>[ 4.844970] input: simple_remote_appkey as /devices/virtual/input/input9
<6>[ 4.851287] simple_remote simple_remote.0: ***** Successfully registered
<7>[ 4.858184] RTC Registering with rs30000048
<7>[ 4.862701] msmrtc_rpc_proc_result: RPC client reply for PROC=12 success
<7>[ 4.869171] msmrtc_rpc_proc_result: RPC client reply for PROC=17 success
<6>[ 4.875854] using rtc device, msm_rtc, for alarms
<7>[ 4.879852] msm_rtc: dev (254:0)
<6>[ 4.883300] rs30000048 rs30000048.262144: rtc core: registered msm_rtc as rtc0
<7>[ 4.890625] msm_rtc_secure: dev (254:1)
<6>[ 4.894287] rs30000048 rs30000048.262144: rtc core: registered msm_rtc_secure as rtc1
<6>[ 4.902130] i2c /dev entries driver
<6>[ 4.906311] AKM8975 compass driver: initialize
<6>[ 4.910125] RPC CALL -- TOD TIME UPDATE: ttick = 388369
<6>[ 4.910125] stamp=51800140268208128, freq = 1768121715
<6>[ 4.920745] input: compass as /devices/virtual/input/input10
<6>[ 4.926239] AKM8975 successfully probed.
<6>[ 4.929901] Linux video capture interface: v2.00
<6>[ 4.934967] seix006_init
<6>[ 4.937103] __seix006_probe
<3>[ 4.940643] Enabled VREG "gp15" at 1200 mV
<3>[ 4.944091] Enabled VREG "lvsw1" at 1800 mV
<3>[ 4.948394] Enabled VREG "gp2" at 2800 mV
<7>[ 4.984710] msmrtc_tod_proc_result: 04/28/2011 07:01:59 (03)
<6>[ 4.984832] rs30000048 rs30000048.262144: setting system clock to 2011-04-28 07:01:59 UTC (1303974119)
<3>[ 5.018188] Disabled VREG "gp2"
<3>[ 5.018280] Disabled VREG "lvsw1"
<3>[ 5.018402] Disabled VREG "gp15"
<3>[ 5.020202] Enabled VREG "gp15" at 1200 mV
<3>[ 5.020324] Enabled VREG "lvsw1" at 1800 mV
<3>[ 5.020599] Enabled VREG "gp2" at 2800 mV
<3>[ 5.020812] msm_cam_ovm7692: pass ovm7692_ctrl kzalloc
<3>[ 5.020904] msm_cam_ovm7692: ovm7692_i2c_probe succeeded!
<3>[ 5.021118] msm_cam_ovm7692: ovm7692 pass i2c_add_driver
<3>[ 5.031250] msm_cam_ovm7692: ovm7692_power_on [e]
<3>[ 5.031494] msm_cam_ovm7692: ovm7692_i2c_read PID H:0x76
<3>[ 5.031738] msm_cam_ovm7692: ovm7692_i2c_read PID L:0x92
<3>[ 5.031829] msm_cam_ovm7692: ovm7692_i2c_read model_id L:0x7692
<3>[ 5.032501] msm_cam_ovm7692: ovm7692 model_id = 0x7692
<3>[ 5.037750] msm_cam_ovm7692: ovm7692 REG12 = 0x0
<3>[ 5.042358] msm_cam_ovm7692: ovm7692 pass write
<3>[ 5.046875] msm_cam_ovm7692: ovm7692 after write REG12 = 0x6
<3>[ 5.052490] msm_cam_ovm7692: ovm7692_sensor_poweroff [e]
<3>[ 5.057678] msm_cam_ovm7692: ovm7692_sensor_probe probe_done should power off sensor
<3>[ 5.065551] msm_cam_ovm7692: /home/hudsonslave/root/workspace/offbuild_edream3.0-release-caf_matrix/HUDSON_PRODUCT/zeusrow/HUDSON_VARIANT/user/label/CM/kernel/drivers/media/video/msm/ovm7692.c ovm7692_sensor_probe:543 -->
<3>[ 5.085113] Disabled VREG "gp2"
<3>[ 5.088195] Disabled VREG "lvsw1"
<3>[ 5.091522] Disabled VREG "gp15"
<6>[ 5.095855] msm_gemini_init gemini: success
<6>[ 5.099273] max17040 version 0.2
<6>[ 5.571197] max17040 0-0036: max17040_load_model(): soc (0xf5, 0x40) verified successfully
<6>[ 5.731445] max17040 0-0036: vcell=4058 mV
<6>[ 5.731536] max17040 0-0036: soc=92 %
<6>[ 5.732604] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[ 5.732818] Bluetooth: HCI UART driver ver 2.2
<6>[ 5.732910] Bluetooth: HCI H4 protocol initialized
<6>[ 5.733001] Bluetooth: HCILL protocol initialized
<6>[ 5.733093] Bluetooth: HCI_IBS protocol initialized
<7>[ 5.733917] zeus_wifi_status: 0
<7>[ 5.733978] zeus_wifi_status_register: 803952d0 cee3c620
<6>[ 5.734313] mmc0: Qualcomm MSM SDCC at 0x00000000a3000000 irq 96,0 dma 8
<6>[ 5.737274] mmc0: 8 bit data mode disabled
<6>[ 5.741394] mmc0: 4 bit data mode enabled
<6>[ 5.745361] mmc0: polling status mode disabled
<6>[ 5.749786] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 96000000 Hz
<6>[ 5.756042] mmc0: Slot eject status = 1
<6>[ 5.759857] mmc0: Power save feature enable = 1
<6>[ 5.764373] mmc0: DM non-cached buffer at ffc2e000, dma_addr 0x4f090000
<6>[ 5.770965] mmc0: DM cmd busaddr 0x4f090000, cmdptr busaddr 0x4f090300
<6>[ 5.778472] mmc1: Qualcomm MSM SDCC at 0x00000000a3100000 irq 100,523 dma 8
<6>[ 5.784454] mmc1: 8 bit data mode disabled
<6>[ 5.788513] mmc1: 4 bit data mode enabled
<6>[ 5.792510] mmc1: polling status mode disabled
<6>[ 5.796936] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 96000000 Hz
<6>[ 5.803192] mmc1: Slot eject status = 0
<6>[ 5.807006] mmc1: Power save feature enable = 1
<6>[ 5.811523] mmc1: DM non-cached buffer at ffc2f000, dma_addr 0x4f092000
<6>[ 5.818115] mmc1: DM cmd busaddr 0x4f092000, cmdptr busaddr 0x4f092300
<6>[ 5.825408] logger: created 64K log 'log_main'
<6>[ 5.829132] logger: created 256K log 'log_events'
<6>[ 5.833892] logger: created 64K log 'log_radio'
<6>[ 5.838348] logger: created 64K log 'log_system'
<6>[ 5.842987] Advanced Linux Sound Architecture Driver Version 1.0.21.
<4>[ 5.849578] No device for DAI CODEC_DAI
<4>[ 5.853057] No device for DAI CPU_DAI
<3>[ 5.856933] msm_soc: create pcms
<6>[ 5.860046] asoc: CODEC_DAI <-> CPU_DAI mapping ok
<6>[ 5.865386] ALSA device list:
<6>[ 5.867584] #0: msm-audio (MSM-CARD)
<4>[ 5.871429] u32 classifier
<4>[ 5.874023] Actions configured
<4>[ 5.877502] Netfilter messages via NETLINK v0.30.
<4>[ 5.882263] nf_conntrack version 0.5.0 (6385 buckets, 25540 max)
<4>[ 5.888488] ctnetlink v0.93: registering with nfnetlink.
<6>[ 5.893554] xt_time: kernel timezone is -0000
<6>[ 5.898010] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 5.903198] arp_tables: (C) 2002 David S. Miller
<6>[ 5.907745] TCP cubic registered
<6>[ 5.911163] NET: Registered protocol family 10
<6>[ 5.915802] lo: Disabled Privacy Extensions
<6>[ 5.921936] Mobile IPv6
<6>[ 5.921997] IPv6 over IPv4 tunneling driver
<6>[ 5.926544] sit0: Disabled Privacy Extensions
<6>[ 5.930969] ip6tnl0: Disabled Privacy Extensions
<6>[ 5.935241] NET: Registered protocol family 17
<6>[ 5.939483] NET: Registered protocol family 15
<6>[ 5.943939] Bluetooth: L2CAP ver 2.14
<6>[ 5.947540] Bluetooth: L2CAP socket layer initialized
<6>[ 5.952606] Bluetooth: SCO (Voice Link) ver 0.6
<6>[ 5.957092] Bluetooth: SCO socket layer initialized
<6>[ 5.965759] cdcc_pm_gpio_config: uSD power on
<6>[ 5.966491] Bluetooth: RFCOMM TTY layer initialized
<6>[ 5.971191] Bluetooth: RFCOMM socket layer initialized
<6>[ 5.976287] Bluetooth: RFCOMM ver 1.11
<6>[ 5.980010] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[ 5.985321] Bluetooth: BNEP filters: protocol multicast
<6>[ 5.990509] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[ 5.999938] clock_late_init() disabled 31 unused clocks
<6>[ 6.002868] [voice.c:voice_init]
<6>[ 6.006195] __msm_rpc_connect: server not found 30000091:30001
<3>[ 6.010742] hs_rpc_cb_init: couldn't open rpc client with version 196609 err -113
<6>[ 6.018310] [voice.c:voice_thread] voice_thread() start
<6>[ 6.028167] VFP support v0.3: implementor 51 architecture 64 part 0f variant 1 rev 0
<6>[ 6.048034] kgsl mmu config 0x1555551
<7>[ 6.056060] msmrtc_tod_proc_result: 04/28/2011 07:02:00 (03)
<6>[ 6.056182] rs30000048 rs30000048.262144: setting system clock to 2011-04-28 07:02:00 UTC (1303974120)
<6>[ 6.056365] msm_v4l2: msm_v4l2_init
<6>[ 6.056823] Freeing init memory: 176K
<6>[ 6.137023] yaffs: dev is 32505858 name is "mtdblock2"
<6>[ 6.137145] yaffs: passed flags ""
<4>[ 6.137207] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>[ 6.141998] yaffs: restored from checkpoint
<4>[ 6.142120] yaffs_read_super: isCheckpointed 1
<4>[ 6.150665] save exit: isCheckpointed 1
<4>[ 6.201446] save exit: isCheckpointed 1
<6>[ 6.201965] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 6.202056] yaffs: passed flags ""
<4>[ 6.202117] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 6.420227] mmc1: host does not support reading read-only switch. assuming write-enable.
<6>[ 6.420410] mmc1: new high speed SDHC card at address 0001
<6>[ 6.420623] sdio_al mmc1:0001: Probing..
<6>[ 6.420867] mmcblk0: mmc1:0001 00000 14.7 GiB
<6>[ 6.421112] mmcblk0: p1
<4>[ 6.655792] yaffs: restored from checkpoint
<4>[ 6.656097] yaffs_read_super: isCheckpointed 1
<4>[ 6.691375] save exit: isCheckpointed 1
<6>[ 6.712127] keychord: using input dev keypad-game-zeus for fevent
<6>[ 6.712249] keychord: using input dev keypad-zeus for fevent
<3>[ 6.712585] init: cannot open '/initlogo.rle'
<6>[ 6.715209] yaffs: dev is 32505858 name is "mtdblock2"
<6>[ 6.715301] yaffs: passed flags ""
<4>[ 6.715362] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>[ 6.719268] yaffs: restored from checkpoint
<4>[ 6.719360] yaffs_read_super: isCheckpointed 1
<4>[ 6.731445] save exit: isCheckpointed 1
<6>[ 6.901794] yaffs: dev is 32505856 name is "mtdblock0"
<6>[ 6.901885] yaffs: passed flags ""
<4>[ 6.901947] yaffs: Attempting MTD mount on 31.0, "mtdblock0"
<4>[ 7.576416] yaffs: restored from checkpoint
<4>[ 7.576751] yaffs_read_super: isCheckpointed 1
<6>[ 7.591461] yaffs: dev is 32505859 name is "mtdblock3"
<6>[ 7.591583] yaffs: passed flags ""
<4>[ 7.591644] yaffs: Attempting MTD mount on 31.3, "mtdblock3"
<4>[ 7.675079] yaffs: restored from checkpoint
<4>[ 7.681610] yaffs_read_super: isCheckpointed 0
<6>[ 7.681823] yaffs: dev is 32505858 name is "mtdblock2"
<6>[ 7.681915] yaffs: passed flags ""
<4>[ 7.681976] yaffs: Attempting MTD mount on 31.2, "mtdblock2"
<4>[ 7.692016] yaffs: restored from checkpoint
<4>[ 7.692108] yaffs_read_super: isCheckpointed 1
<3>[ 8.010650] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<3>[ 8.084045] init: cannot find '/system/bin/utsd', disabling 'utsd'
<6>[ 8.095733] yaffs: dev is 32505857 name is "mtdblock1"
<6>[ 8.095764] yaffs: passed flags ""
<4>[ 8.095764] yaffs: Attempting MTD mount on 31.1, "mtdblock1"
<6>[ 8.101104] SMD: ch 39 0 -> 1
<4>[ 8.101470] yaffs: restored from checkpoint
<4>[ 8.101501] yaffs_read_super: isCheckpointed 1
<6>[ 8.102020] SMD: ch 39 1 -> 2
<6>[ 8.107086] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
<6>[ 8.107116] CPUFREQ: Per core ondemand sysfs interface is deprecated - sampling_rate
<6>[ 8.110260] SMD: ch 40 0 -> 1
<6>[ 8.110870] SMD: ch 40 1 -> 2
<6>[ 8.111083] SMD: ch 41 0 -> 1
<6>[ 8.112609] SMD: ch 41 1 -> 2
<6>[ 8.156799] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[ 8.156860] enabling adb
<6>[ 8.157440] adb_open
<6>[ 14.431945] msm_kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw
<6>[ 14.436309] msm_kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw
<6>[ 14.438171] msm_kgsl: initialized dev=0 mmu=on per_process_pagetable=off
<6>[ 14.509643] AKM8975 AKECS_GetOpenStatus returned (1)
<6>[ 14.510070] AKM8975 AKECS_GetCloseStatus returned (0)
<6>[ 33.123779] msm_otg_resume: usb exited from low power mode
<6>[ 33.125640] msm_hsusb msm_hsusb: msm72k_udc: OFFLINE -> ONLINE
<6>[ 33.355316] msm_hsusb msm_hsusb: suspend
<6>[ 33.629455] msm_hsusb msm_hsusb: reset
<6>[ 33.631683] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<6>[ 33.631774]
<6>[ 33.631805] *********** Charger Type: HOST PC
<6>[ 33.631805]
<6>[ 33.669616] msm_hsusb msm_hsusb: reset
<6>[ 33.669738]
<6>[ 33.669738] Charger Type: STD DOWNSTREAM PORT
<6>[ 33.671844] msm_hsusb msm_hsusb: portchange USB_SPEED_HIGH
<6>[ 33.790802] android_usb gadget: high speed config #1: android
<6>[ 55.994079] AKM8975 AKECS_GetOpenStatus returned (1)
<6>[ 55.994537] AKM8975 AKECS_GetCloseStatus returned (0)
<4>[ 56.234436] wifi_set_power = 1
<6>[ 56.234436] zeus_wifi_power: 1
<4>[ 56.451690] wifi_set_carddetect = 1
<7>[ 56.451690] zeus_wifi_set_carddetect: 1
<7>[ 56.451690] zeus_wifi_status: 1
<6>[ 56.451721] mmc0: Slot status change detected (0 -> 1)
<4>[ 56.454162]
<4>[ 56.454162] Dongle Host Driver, version 4.218.248.6
<7>[ 56.527526] mmc0: queuing CIS tuple 0x91 length 3
<6>[ 56.527557] mmc0: new SDIO card at address 0001
<6>[ 56.527679] sdio_al mmc0:0001: Probing..
<6>[ 56.527709] sdio_al mmc0:0001: ignore card vendor id 0x2d0, device id 0x4329DHD: dongle ram size is set to 294912(orig 294912)
<4>[ 56.709564] wifi_get_mac_addr
<4>[ 56.710144] Firmware version = wl0: Nov 10 2010 13:01:41 version 4.218.248.61
<4>[ 56.845306] eth0: Broadcom Dongle Host Driver mac=30:17:c8:e6:52:55
<6>[ 57.346191] simple_remote simple_remote.0: No Device
<6>[ 57.518829] request_suspend_state: wakeup (3->0) at 55627808927 (2011-04-28 07:02:51.962616002 UTC)
<6>[ 57.566223] input: atdaemon as /devices/virtual/input/input11
<6>[ 57.568939] keychord: using input dev atdaemon for fevent
<3>[ 61.726165] init: sys_prop: permission denied uid:1000 name:user.language
<3>[ 61.726257] init: sys_prop: permission denied uid:1000 name:user.region
<6>[ 63.324310] AKM8975 AKECS_GetOpenStatus returned (1)
<6>[ 63.324523] AKM8975 AKECS_GetCloseStatus returned (0)
<6>[ 65.731079] max17040 0-0036: batt: 92%, 4121 mV
<7>[ 67.691070] eth0: no IPv6 routers present
<6>[ 125.731079] max17040 0-0036: batt: 92%, 4143 mV
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment