Created
May 26, 2011 01:44
-
-
Save tetsu-koba/992388 to your computer and use it in GitHub Desktop.
Kernel boot log of Galaxy Tab 10.1
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
<6>[ 0.000000] Initializing cgroup subsys cpu | |
<5>[ 0.000000] Linux version 2.6.36.3 (se.infra@SEP-49) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Thu May 5 01:00:15 KST 2011 | |
<4>[ 0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c53c7f | |
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache | |
<4>[ 0.000000] Machine: p3 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<4>[ 0.000000] Ignoring unrecognised tag 0x41000801 | |
<6>[ 0.000000] Tegra reserved memory: | |
<6>[ 0.000000] LP0: 1840e000 - 1840ffff | |
<6>[ 0.000000] Bootloader framebuffer: 00000000 - ffffffff | |
<6>[ 0.000000] Framebuffer: 2e700000 - 2eefffff | |
<6>[ 0.000000] 2nd Framebuffer: 2ef00000 - 2fefffff | |
<6>[ 0.000000] Carveout: 2ff00000 - 3fefffff | |
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc | |
<7>[ 0.000000] On node 0 totalpages: 189952 | |
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0606b80, node_mem_map c0801000 | |
<7>[ 0.000000] Normal zone: 1280 pages used for memmap | |
<7>[ 0.000000] Normal zone: 0 pages reserved | |
<7>[ 0.000000] Normal zone: 162304 pages, LIFO batch:31 | |
<7>[ 0.000000] HighMem zone: 768 pages used for memmap | |
<7>[ 0.000000] HighMem zone: 25600 pages, LIFO batch:7 | |
<6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c100e000 s6240 r8192 d14240 u65536 | |
<6>[ 0.000000] pcpu-alloc: s6240 r8192 d14240 u65536 alloc=16*4096 | |
<6>[ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 187904 | |
<5>[ 0.000000] Kernel command line: mem=511M@0M secmem=1M@511M mem=512M@512M vmalloc=256M fota_boot=false video=tegrafb console=ttyS0,115200n8 quiet lpj=9994240 usbcore.old_scheme_first=1 lp0_vec=8192@0x1840E000 androidboot.serialno=C329070F2CFBA4E androidboot.bootloader=P7100BUKB7 androidboot.baseband=%s charging_mode=0 emmc_checksum_done=false emmc_checksum_pass=false tegraboot=sdmmc gpt | |
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
<6>[ 0.000000] Memory: 511MB 231MB = 742MB total | |
<5>[ 0.000000] Memory: 741872k/741872k available, 305680k reserved, 105472K highmem | |
<5>[ 0.000000] Virtual kernel memory layout: | |
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
<5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB) | |
<5>[ 0.000000] vmalloc : 0xe8800000 - 0xf8000000 ( 248 MB) | |
<5>[ 0.000000] lowmem : 0xc0000000 - 0xe8000000 ( 640 MB) | |
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) | |
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) | |
<5>[ 0.000000] .init : 0xc0008000 - 0xc0032000 ( 168 kB) | |
<5>[ 0.000000] .text : 0xc0032000 - 0xc056b000 (5348 kB) | |
<5>[ 0.000000] .data : 0xc0594000 - 0xc06076e0 ( 462 kB) | |
<6>[ 0.000000] Hierarchical RCU implementation. | |
<6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. | |
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled. | |
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled. | |
<6>[ 0.000000] NR_IRQS:448 | |
<4>[ 0.000000] Console: colour dummy device 80x30 | |
<6>[ 6.085487] Calibrating delay loop (skipped) preset value.. 1998.84 BogoMIPS (lpj=9994240) | |
<6>[ 6.085506] pid_max: default: 32768 minimum: 301 | |
<4>[ 6.085796] Mount-cache hash table entries: 512 | |
<6>[ 6.086324] Initializing cgroup subsys debug | |
<6>[ 6.086340] Initializing cgroup subsys cpuacct | |
<6>[ 6.086362] Initializing cgroup subsys freezer | |
<6>[ 6.086406] CPU: Testing write buffer coherency: ok | |
<6>[ 6.086599] Calibrating local timer... 249.86MHz, setting to 2.50MHz. | |
<4>[ 6.185473] CPU1: Booted secondary processor | |
<6>[ 6.195349] Brought up 2 CPUs | |
<6>[ 6.195365] SMP: Total of 2 processors activated (3997.69 BogoMIPS). | |
<6>[ 6.199517] regulator: core version 0.5 | |
<6>[ 6.199767] NET: Registered protocol family 16 | |
<6>[ 6.199813] tegra_gpio_init() | |
<6>[ 6.200537] host1x bus init | |
<6>[ 6.201035] Tegra SKU: 8 Rev: A03 CPU Process: 1 Core Process: 1 Speedo ID: 1 | |
<6>[ 6.201050] Tegra Revision: A03 prime SKU: 8 CPU Process: 1 Core Process: 1 | |
<4>[ 6.202895] Unable to set clock uartd to rate 216000000: -22 | |
<4>[ 6.203245] Unable to set clock pll_a to rate 11289600: -22 | |
<6>[ 6.205188] ram_console: got buffer at 3ff00000, size 100000 | |
<6>[ 6.205283] ram_console: found existing buffer, size 751, start 751 | |
<6>[ 6.207100] console [ram-1] enabled | |
<4>[ 6.207144] p4_check_hwrev: Valid revision NOT found! Latest one will be assigned! | |
<6>[ 6.207155] p4_check_hwrev: system_rev = 11 (gpio value = 0x03) | |
<6>[ 6.207241] p3_init_wifi_mem: WIFI MEM Allocated | |
<4>[ 6.207970] sec_s5k5ccgx_init,, | |
<6>[ 6.208373] [PM] P3 suspend mode set as TEGRA_SUSPEND_LP0 | |
<6>[ 6.208381] p3_touch_init_hw | |
<7>[ 6.208928] usb_device_init: default luns=1, system_rev=11 | |
<6>[ 6.209072] tegra_arb_init: initialized | |
<4>[ 6.209140] tegra_iovmm_register: added iovmm-gart | |
<4>[ 6.215352] bio: create slab <bio-0> at 0 | |
<4>[ 6.215668] [SENSORS CORE] sensors_class_init | |
<5>[ 6.216039] SCSI subsystem initialized | |
<6>[ 6.216310] tegra-otg tegra-otg: otg transceiver registered | |
<6>[ 6.216443] usbcore: registered new interface driver usbfs | |
<6>[ 6.216522] usbcore: registered new interface driver hub | |
<6>[ 6.216604] usbcore: registered new device driver usb | |
<6>[ 6.216852] i2c-gpio i2c-gpio.5: using pins 194 (SDA) and 192 (SCL) | |
<6>[ 6.217007] i2c-gpio i2c-gpio.6: using pins 112 (SDA) and 119 (SCL) | |
<6>[ 6.217178] i2c-gpio i2c-gpio.8: using pins 51 (SDA) and 64 (SCL) | |
<6>[ 6.217348] i2c-gpio i2c-gpio.9: using pins 195 (SDA) and 193 (SCL) | |
<6>[ 6.217509] i2c-gpio i2c-gpio.10: using pins 203 (SDA) and 22 (SCL) | |
<6>[ 6.217732] i2c-gpio i2c-gpio.11: using pins 50 (SDA) and 71 (SCL) | |
<6>[ 6.217895] i2c-gpio i2c-gpio.12: using pins 116 (SDA) and 114 (SCL) | |
<6>[ 6.217996] i2c-gpio i2c-gpio.13: using pins 59 (SDA) and 58 (SCL) | |
<6>[ 6.218348] i2c-gpio i2c-gpio.14: using pins 83 (SDA) and 72 (SCL) | |
<6>[ 6.218518] i2c-gpio i2c-gpio.15: using pins 67 (SDA) and 82 (SCL) | |
<6>[ 6.220000] tps6586x 4-0074: VERSIONCRC is 0a | |
<6>[ 6.225164] regulator: REG-SM_0: 725 <--> 1500 mV at 1200 mV normal standby | |
<6>[ 6.228276] regulator: REG-SM_1: 725 <--> 1500 mV at 1000 mV normal standby | |
<6>[ 6.230932] regulator: REG-SM_2: 1800 mV normal standby | |
<6>[ 6.233142] regulator: REG-LDO_0: 3300 mV normal standby | |
<6>[ 6.235809] regulator: REG-LDO_1: 1100 mV normal standby | |
<6>[ 6.238466] regulator: REG-LDO_2: 725 <--> 1500 mV at 1200 mV normal standby | |
<6>[ 6.240357] regulator: REG-LDO_3: 3300 mV normal standby | |
<6>[ 6.243016] regulator: REG-LDO_4: 1800 mV normal standby | |
<6>[ 6.244010] regulator: REG-LDO_5: 2850 mV normal standby | |
<6>[ 6.247135] regulator: REG-LDO_6: 3300 mV normal standby | |
<6>[ 6.249348] regulator: REG-LDO_7: 3300 mV normal standby | |
<6>[ 6.251218] regulator: REG-LDO_8: 1800 mV normal standby | |
<6>[ 6.252196] regulator: REG-LDO_9: 2850 mV normal standby | |
<6>[ 6.366831] [PM] tps6586x_print_reg()----------------- | |
<6>[ 6.366843] 0x00 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366853] 0x08 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366862] 0x10 : 0x0f 0x00 0x9e 0x00 0xa0 0x00 0x00 0x00 | |
<6>[ 6.366871] 0x18 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366880] 0x20 : 0x00 0x00 0x00 0x0b 0x0b 0x05 0x13 0x13 | |
<6>[ 6.366889] 0x28 : 0x07 0x13 0x13 0x00 0x00 0x00 0x00 0x13 | |
<6>[ 6.366898] 0x30 : 0x13 0x00 0x04 0x04 0x00 0x00 0x00 0x00 | |
<6>[ 6.366907] 0x38 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366916] 0x40 : 0x00 0xef 0x44 0x3f 0x9f 0x00 0x3d 0x03 | |
<6>[ 6.366924] 0x48 : 0x08 0x0c 0x1a 0x00 0x05 0x00 0x00 0x00 | |
<6>[ 6.366933] 0x50 : 0x00 0x20 0x00 0x00 0x20 0xc0 0x1f 0x00 | |
<6>[ 6.366942] 0x58 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366950] 0x60 : 0x00 0x00 0x00 0x0f 0xff 0x00 0x00 0x00 | |
<6>[ 6.366959] 0x68 : 0x00 0x00 0x0f 0xff 0x00 0x00 0x00 0x00 | |
<6>[ 6.366968] 0x70 : 0x00 0x00 0x00 0x00 0x00 0x0f 0xff 0x00 | |
<6>[ 6.366977] 0x78 : 0x00 0x0f 0xff 0x00 0x00 0x00 0x00 0x0f | |
<6>[ 6.366985] 0x80 : 0xff 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.366994] 0x88 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.367002] 0x90 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.367011] 0x98 : 0x03 0xff 0x00 0x00 0x00 0x00 0x00 0x03 | |
<6>[ 6.367020] 0xa0 : 0xff 0x00 0x00 0x00 0x00 0x00 0x03 0xff | |
<6>[ 6.367029] 0xa8 : 0x00 0x00 0x00 0x00 0x00 0x03 0xff 0x00 | |
<6>[ 6.367038] 0xb0 : 0xff 0xff 0xff 0xff 0xff 0x00 0x00 0x00 | |
<6>[ 6.367046] 0xb8 : 0x00 0x81 0x07 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.367055] 0xc0 : 0xf4 0x1d 0x7c 0x00 0x00 0x00 0x02 0xe4 | |
<6>[ 6.367064] 0xc8 : 0x3f 0x66 0x2a 0x01 0xf0 0x0a 0x00 0x00 | |
<6>[ 6.367073] 0xd0 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.367081] 0xd8 : 0x00 0x02 0x00 0x00 0xf0 0x00 0x00 0x00 | |
<6>[ 6.367090] 0xe0 : 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | |
<6>[ 6.367099] 0xe8 : 0x00 0x00 0x00 0x00 0x14 0x15 0x89 0x1f | |
<6>[ 6.367108] 0xf0 : 0x87 0x00 0x0e 0x4d 0x74 0x18 0xd5 0xe0 | |
<6>[ 6.367117] 0xf8 : 0x25 0x73 0x00 0x54 0x9f 0x56 0x81 0x01 | |
<6>[ 6.367123] [PM] ----------------- | |
<6>[ 6.367272] Fuel gauge attach success!!! | |
<6>[ 6.367515] fg_set_battery_type : DesignCAP(0x478a), Battery type(SDI) | |
<6>[ 6.368437] fg_read_soc : SOC(60), data(0x3cec) | |
<6>[ 6.369127] [FG_Model] | |
<6>[ 6.373617] 0x7df0, | |
<6>[ 6.373622] 0xb500, | |
<6>[ 6.373627] 0xb860, | |
<6>[ 6.373631] 0xb930, | |
<6>[ 6.373635] 0xb980, | |
<6>[ 6.373639] 0xbb70, | |
<6>[ 6.373644] 0xbc00, | |
<6>[ 6.373648] 0xbc70, | |
<6>[ 6.373652] 0xbd20, | |
<6>[ 6.373656] 0xbdb0, | |
<6>[ 6.373661] 0xbef0, | |
<6>[ 6.373665] 0xc140, | |
<6>[ 6.373669] 0xc3c0, | |
<6>[ 6.373673] 0xc6e0, | |
<6>[ 6.373678] 0xcd20, | |
<6>[ 6.373682] 0xd100, | |
<6>[ 6.373686] 0x0020, | |
<6>[ 6.373691] 0x0340, | |
<6>[ 6.373695] 0x15d0, | |
<6>[ 6.373700] 0x2dd0, | |
<6>[ 6.373704] 0x0600, | |
<6>[ 6.373708] 0x18f0, | |
<6>[ 6.373712] 0x25a0, | |
<6>[ 6.373717] 0x1800, | |
<6>[ 6.373721] 0x22a0, | |
<6>[ 6.373725] 0x1670, | |
<6>[ 6.373729] 0x09a0, | |
<6>[ 6.373734] 0x08c0, | |
<6>[ 6.373738] 0x0b30, | |
<6>[ 6.373742] 0x04f0, | |
<6>[ 6.373746] 0x0870, | |
<6>[ 6.373750] 0x0870, | |
<6>[ 6.373755] 0x0200, | |
<6>[ 6.373759] 0x0200, | |
<6>[ 6.373763] 0x0200, | |
<6>[ 6.373767] 0x0200, | |
<6>[ 6.373771] 0x0200, | |
<6>[ 6.373776] 0x0200, | |
<6>[ 6.373780] 0x0200, | |
<6>[ 6.373784] 0x0200, | |
<6>[ 6.373788] 0x0200, | |
<6>[ 6.373793] 0x0200, | |
<6>[ 6.373797] 0x0200, | |
<6>[ 6.373801] 0x0200, | |
<6>[ 6.373805] 0x0200, | |
<6>[ 6.373809] 0x0200, | |
<6>[ 6.373814] 0x0200, | |
<6>[ 6.373818] 0x0200 | |
<6>[ 6.378320] [MAX17042] 1/1/2070 00:00, | |
<6>[ 6.381981] 0000h,ff00h,7f80h,ff01h,0000h,1f1bh,3cech,474ah,1ea0h,c06ch,f850h,fd26h,000eh,2e50h,3cf3h,1f24h, | |
<6>[ 6.385650] 330eh,5736h,7d5ah,0000h,01c7h,0148h,1e41h,0184h,478ah,bfech,260eh,d2afh,24cah,2210h,0400h,1f16h, | |
<6>[ 6.389313] 4d78h,0092h,ff5bh,42bfh,1400h,2305h,1e40h,7528h,0076h,87a4h,506bh,0010h,e3e1h,290eh,31b5h,0000h, | |
<6>[ 6.392977] 271bh,57eeh,0800h,0000h,0592h,433ch,0100h,05e0h,0076h,1a1ch,007dh,0592h,1680h,1408h,37f0h,e000h, | |
<6>[ 6.396644] 7800h,f940h,fac9h,0f00h,c086h,270ch,7501h,ffd4h,31a1h,2f08h,1f40h,4900h,0492h,025ah,b15eh,485eh, | |
<6>[ 6.400307] 0028h,ffffh,0001h,0010h,fdffh,fff7h,ff87h,0001h,4c40h,000ch,4c50h,0000h,4000h,0000h,c210h,0820h, | |
<6>[ 6.403970] 0000h,0000h,0000h,0000h,0000h,0000h,2e50h,ff05h,3a95h,50b7h,f7b5h,c229h,006dh,3917h,c06ch,2e7ch, | |
<6>[ 6.404309] Advanced Linux Sound Architecture Driver Version 1.0.23. | |
<6>[ 6.404651] Bluetooth: Core ver 2.15 | |
<6>[ 6.404692] NET: Registered protocol family 31 | |
<6>[ 6.404699] Bluetooth: HCI device and connection manager initialized | |
<6>[ 6.404710] Bluetooth: HCI socket layer initialized | |
<6>[ 6.404823] Switching to clocksource timer_us | |
<6>[ 6.405250] tegra-nvmap tegra-nvmap: created carveout iram (256KiB) | |
<6>[ 6.405365] tegra-nvmap tegra-nvmap: created carveout generic-0 (262144KiB) | |
<6>[ 6.411132] NET: Registered protocol family 2 | |
<6>[ 6.411249] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) | |
<6>[ 6.411664] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) | |
<6>[ 6.413262] TCP bind hash table entries: 65536 (order: 8, 1572864 bytes) | |
<6>[ 6.417839] TCP: Hash tables configured (established 131072 bind 65536) | |
<6>[ 6.417851] TCP reno registered | |
<6>[ 6.417873] UDP hash table entries: 512 (order: 3, 32768 bytes) | |
<6>[ 6.417985] UDP-Lite hash table entries: 512 (order: 3, 32768 bytes) | |
<6>[ 6.418336] NET: Registered protocol family 1 | |
<6>[ 6.418512] Unpacking initramfs... | |
<6>[ 6.451009] Freeing initrd memory: 628K | |
<6>[ 6.451123] PMU: registered new PMU device of type 0 | |
<6>[ 6.451219] tegra_spdif_probe | |
<6>[ 6.451274] spdif_set_sample_rate: spdif_clk rate 5644800 | |
<6>[ 6.451500] setup_dma | |
<6>[ 6.452208] vibrator I2C attach success!!! | |
<4>[ 6.474793] highmem bounce pool size: 64 pages | |
<6>[ 6.475012] ashmem: initialized | |
<6>[ 6.475804] fuse init (API version 7.15) | |
<6>[ 6.476694] io scheduler noop registered | |
<6>[ 6.476702] io scheduler deadline registered | |
<6>[ 6.476769] io scheduler cfq registered (default) | |
<4>[ 6.476848] cmc623_pwm Probe START!!! | |
<6>[ 6.476942] cmc623_pwm_bl cmc623_pwm_bl: cmc623_pwm backlight driver is enabled. | |
<4>[ 6.476952] cmc623_pwm Probe END!!! | |
<6>[ 6.477962] tegra_grhost tegra_grhost: initialized | |
<6>[ 6.478011] host1x: tegradc tegradc | |
<6>[ 6.478181] [HDMI] sucess device_create_file(hdmi_edid_force_pass)! | |
<6>[ 6.478281] tegradc tegradc.0: probed | |
<6>[ 6.478675] tegradc tegradc.0: probed | |
<6>[ 6.478830] tegradc tegradc.0: registered overlay | |
<6>[ 6.478843] host1x: tegradc tegradc | |
<6>[ 6.478976] [HDMI] sucess device_create_file(hdmi_edid_force_pass)! | |
<6>[ 6.479473] nvhdcp: using "always on" policy. | |
<6>[ 6.479512] tegradc tegradc.1: probed | |
<6>[ 6.480078] tegradc tegradc.1: probed | |
<6>[ 6.480221] tegradc tegradc.1: registered overlay | |
<6>[ 6.480230] [HDMI] tegra_dc_hdmi_detect() | |
<3>[ 6.480238] [HDMI][ERROR] tegra_dc_hdmi_detect() tegra_dc_hdmi_hpd fail | |
<6>[ 6.480335] nvhdcp: hdmi hotplug detected (hpd = 0) | |
<6>[ 6.480472] **** < cmc623_init > ***** | |
<6>[ 6.480526] [CMC623:INFO] : cmc623_probe | |
<6>[ 6.480608] <cmc623_i2c_driver Add START> | |
<6>[ 6.480642] [CMC623:INFO] : cmc623_i2c_probe called | |
<6>[ 6.480650] panel_gpio_init called | |
<6>[ 6.480661] cmc623_gpio_init called | |
<6>[ 6.480723] cmc623_init Return value (0) | |
<6>[ 6.480731] [CMC623:INFO]:cabc_onoff_ctrl value : 1 | |
<6>[ 6.491213] <cmc623_i2c_driver Add END> | |
<6>[ 6.491501] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
<6>[ 6.492169] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra | |
<6>[ 6.499123] console [ttyS0] enabled | |
<6>[ 6.499359] tegra_uart.0: ttyHS0 at I/O 0x0 (irq = 68) is a unknown | |
<6>[ 6.499469] Registered UART port ttyHS0 | |
<6>[ 6.499514] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown | |
<6>[ 6.499620] Registered UART port ttyHS2 | |
<6>[ 6.499654] tegra_uart.3: ttyHS3 at I/O 0x0 (irq = 122) is a unknown | |
<6>[ 6.499749] Registered UART port ttyHS3 | |
<6>[ 6.499800] Initialized tegra uart driver | |
<6>[ 6.501974] loop: module loaded | |
<6>[ 6.502396] sec_misc_init: started! | |
<4>[ 6.502403] [denis]sec_misc_init! | |
<6>[ 6.502558] stmpe811_adc_init: start! | |
<4>[ 6.502724] stmpe811_adc_i2c_probe!!! | |
<4>[ 6.503162] stmpe811_adc_i2c_probe: CHIP_ID = 0x811. | |
<3>[ 6.503502] i2c i2c-11: sendbytes: NAK bailout. | |
<4>[ 6.525565] STMPE811_SYS_CTRL2 = 0x0.. | |
<4>[ 6.526263] STMPE811_INT_EN = 0x0.. | |
<4>[ 6.526959] STMPE811_ADC_CTRL1 = 0x3c.. | |
<4>[ 6.527654] STMPE811_ADC_CTRL2 = 0x3.. | |
<4>[ 6.528350] STMPE811_GPIO_AF = 0xff.. | |
<4>[ 6.529046] STMPE811_TSC_CTRL = 0x0.. | |
<4>[ 6.529052] adc_i2c_probe success!!! | |
<6>[ 6.529279] i2c i2c-0: mpu3050: +kxtf9 | |
<4>[ 6.529289] i2c i2c-0: WARNING: Accel irq not assigned | |
<6>[ 6.529298] i2c i2c-0: mpu3050: +ak8975 | |
<4>[ 6.529306] i2c i2c-0: WARNING: Compass irq not assigned | |
<4>[ 6.529314] i2c i2c-0: mpu3050: No Pressure Present | |
<6>[ 6.546475] i2c i2c-0: Installing irq using 366 | |
<6>[ 6.546484] i2c i2c-0: Module Param interface = mpuirq | |
<7>[ 6.546665] mpu_init | |
<6>[ 6.547905] nct1008 9-004c: nct1008_probe: initialized | |
<6>[ 6.549306] PPP generic driver version 2.4.2 | |
<6>[ 6.549451] PPP Deflate Compression module registered | |
<6>[ 6.549461] PPP BSD Compression module registered | |
<6>[ 6.550266] PPP MPPE Compression module registered | |
<6>[ 6.550278] NET: Registered protocol family 24 | |
<6>[ 6.550611] tun: Universal TUN/TAP device driver, 1.6 | |
<6>[ 6.550620] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> | |
<6>[ 6.550806] usbcore: registered new interface driver cdc_ether | |
<6>[ 6.550857] usbcore: registered new interface driver CDC NCM device | |
<6>[ 6.550910] usbcore: registered new interface driver cdc_subset | |
<6>[ 6.550935] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver | |
<6>[ 6.551061] usbcore: registered new interface driver cdc_acm | |
<6>[ 6.551070] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters | |
<6>[ 6.551134] usbcore: registered new interface driver usblp | |
<6>[ 6.551183] usbcore: registered new interface driver cdc_wdm | |
<6>[ 6.551192] Initializing USB Mass Storage driver... | |
<6>[ 6.551253] usbcore: registered new interface driver usb-storage | |
<6>[ 6.551262] USB Mass Storage support registered. | |
<6>[ 6.551324] usbcore: registered new interface driver libusual | |
<6>[ 6.551445] usbcore: registered new interface driver usbserial | |
<6>[ 6.551454] usbserial: USB Serial Driver core | |
<6>[ 6.551462] NVidia Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007) | |
<4>[ 6.551547] tegra_usb_phy_open() called instance :0 | |
<6>[ 6.552576] Board P4 : tegra_usb_ldo_en=1 instance=0 present regulator=0 | |
<4>[ 6.552589] utmi_phy_power_on() called. instance : 0 | |
<4>[ 6.552610] utmi_phy_clk_enable() called. instance : 0 | |
<4>[ 6.557681] utmi_phy_power_off() called. instance : 0 | |
<4>[ 6.557691] utmi_phy_clk_disable() called. instance : 0 | |
<6>[ 6.557742] Board P4 : tegra_usb_ldo_en=0 instance=0 present regulator=1 | |
<6>[ 6.557781] tegra-otg tegra-otg: SUSPEND --> PERIPHERAL | |
<6>[ 6.557803] Board P4 : tegra_usb_ldo_en=1 instance=0 present regulator=0 | |
<4>[ 6.557815] utmi_phy_power_on() called. instance : 0 | |
<4>[ 6.557834] utmi_phy_clk_enable() called. instance : 0 | |
<6>[ 6.562899] android init | |
<7>[ 6.562906] usb android init pid=0x685e | |
<6>[ 6.562948] android_probe pdata: c05b8058 | |
<7>[ 6.562960] usb vid=0x4e8,pid=0x6860,ver=0x0,product_name=SAMSUNG_Android,manufacturer_name=SAMSUNG,serial=33C11C2416024D7 | |
<6>[ 6.563015] android_bind | |
<7>[ 6.563022] android_bind_config | |
<7>[ 6.563032] usb bind pid=0x685e,vid=0x4e8,bcdDevice=0x400,serial=33C11C2416024D7 | |
<6>[ 6.563183] android_usb gadget: android_usb ready | |
<6>[ 6.563192] fsl-tegra-udc: bind to driver android_usb | |
<6>[ 6.563248] f_acm init | |
<6>[ 6.563254] android_register_function acm | |
<6>[ 6.563261] f_adb init | |
<6>[ 6.563266] android_register_function adb | |
<6>[ 6.563272] f_mass_storage init | |
<6>[ 6.563352] android_register_function usb_mass_storage | |
<6>[ 6.563359] f_mtp init | |
<6>[ 6.563365] android_register_function mtp | |
<6>[ 6.563371] f_rndis init | |
<6>[ 6.563432] android_register_function rndis | |
<3>[ 6.563442] android_usb gadget: invalid number of LUNs: 0 | |
<6>[ 6.569191] DUN is registerd | |
<6>[ 6.569321] adb_bind_config | |
<3>[ 6.569558] rndis_pdata null in rndis_function_bind_config | |
<4>[ 6.575292] [mtpg_function_bind] line = [916] | |
<4>[ 6.575336] [mtpg_function_bind] dual speed line = [983] | |
<4>[ 6.575346] ***** [mtpg_function_bind:1000] calling mtp_function_enable with 0 | |
<4>[ 6.575356] [mtp_function_enable] mtp_function => (disabled) | |
<4>[ 6.575364] ****** mtp_function_enable and line 1308 null_desc | |
<7>[ 6.575373] usb enable mode=0x1 | |
<7>[ 6.575379] usb mode = USBSTATUS_SAMSUNG_KIES (0x1) | |
<7>[ 6.575407] usb enable acm | |
<7>[ 6.575428] usb disable adb | |
<7>[ 6.575448] usb enable mtp | |
<7>[ 6.575456] usb Change Device Descriptor : DeviceClass(0xef),SubClass(0x2),Protocol(0x1) | |
<7>[ 6.575466] usb Change Label : [1]MTP + ACM (SAMSUNG KIES mode) | |
<7>[ 6.575474] usb Save usb mode except tethering and askon (mode=1) | |
<7>[ 6.575486] usb dev->cdev=0xe7a73bc0, dev->cdev->gadget=0xe7a41000, dev->cdev->gadget->speed=0x0, mode=1 | |
<7>[ 6.575496] usb finished setting pid=0x6860 | |
<7>[ 6.575502] usb Don't enable udc. | |
<6>[ 6.575782] input: sec_power_key as /devices/platform/gpio-keys.0/input/input0 | |
<6>[ 6.576275] input: tegra-kbc as /devices/platform/tegra-kbc/input/input1 | |
<6>[ 6.576681] mXT1386: mxt_probe | |
<6>[ 6.576688] maXTouch driver | |
<6>[ 6.576694] "sec_touch" | |
<6>[ 6.576700] addr: 0x004c | |
<6>[ 6.576705] irq: 220 | |
<6>[ 6.576711] flags: 0x0000 | |
<6>[ 6.576717] adapter:"Tegra I2C adapter" | |
<6>[ 6.576723] device: "(null)" | |
<6>[ 6.577121] sec_touch 1-004c: Atmel maXTouch.mXT1386 Firmware version [1.0] Build 170 | |
<6>[ 6.577134] sec_touch 1-004c: Atmel maXTouch.mXT1386 Configuration [X: 33] x [Y: 42] | |
<6>[ 6.577144] sec_touch 1-004c: number of objects: 18 | |
<6>[ 6.577153] maXTouch name: "sec_touchscreen" | |
<6>[ 6.577160] maXTouch phys: "1-004c/input0" | |
<6>[ 6.577166] maXTouch driver setting abs parameters | |
<6>[ 6.577342] input: sec_touchscreen as /devices/platform/tegra-i2c.1/i2c-1/1-004c/input/input2 | |
<3>[ 6.587170] mxt_config_settings | |
<6>[ 6.593384] Reset chip Reset mode (0) | |
<4>[ 6.845229] mxt probe ok | |
<6>[ 6.845282] Successfully added driver sec_touch | |
<6>[ 6.845487] sec_touch 1-004c: maXTouch calibration in progress | |
<6>[ 6.845497] sec_touch 1-004c: maXTouch chip reset | |
<6>[ 6.845704] input: lightsensor-level as /devices/virtual/input/input3 | |
<6>[ 6.846230] input: magnetometer as /devices/virtual/input/input4 | |
<6>[ 6.847166] ak8975c_selftest: device id = 0x48, info = 0x88 | |
<6>[ 6.875596] ak8975c_selftest: self test x = -4, y = -4, z = -522 | |
<6>[ 6.875605] ak8975c_selftest: x passed self test, expect -100<=x<=100 | |
<6>[ 6.875613] ak8975c_selftest: y passed self test, expect -100<=y<=100 | |
<6>[ 6.875620] ak8975c_selftest: z passed self test, expect -1000<=z<=-300 | |
<6>[ 6.875780] kxtf9_probe: start | |
<6>[ 6.875990] input: accelerometer as /devices/virtual/input/input5 | |
<6>[ 6.876412] kxtf9_probe: returning 0 | |
<6>[ 6.876952] using rtc device, tps6586x-rtc, for alarms | |
<6>[ 6.876983] tps6586x-rtc tps6586x-rtc.0: rtc core: registered tps6586x-rtc as rtc0 | |
<6>[ 6.879001] i2c /dev entries driver | |
<6>[ 6.880513] lirc_dev: IR Remote Control driver registered, major 249 | |
<6>[ 6.880523] IR LIRC bridge handler initialized | |
<6>[ 6.880530] Linux video capture interface: v2.00 | |
<6>[ 6.880789] usbcore: registered new interface driver uvcvideo | |
<6>[ 6.880797] USB Video Class driver (v0.1.0) | |
<6>[ 6.880972] trpc_sema_init: registered misc dev 10:45 | |
<6>[ 6.881063] trpc_node_register: Adding 'local' to node list | |
<6>[ 6.882859] trpc_node_register: Adding 'avp-remote' to node list | |
<6>[ 6.883010] tegra_avp_probe: driver registered, kernel 30000000(e8c00000), msg area 2721b000/2721b110 | |
<6>[ 6.883100] tegra_camera: probe | |
<4>[ 6.883295] | |
<4>[ 6.883298] [1;37;44m<=PCAM=>s5k5ccgx_probe:2986: START[0m | |
<4>[ 6.883394] [1;37;44m<=PCAM=>s5k5ccgx_probe:3017: 3MP camera S5K5CCGX loaded.[0m | |
<6>[ 6.883506] s5k5bbgx sensor driver loading | |
<6>[ 6.883887] device-mapper: uevent: version 1.0.3 | |
<6>[ 6.884141] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com | |
<6>[ 6.884183] Bluetooth: HCI UART driver ver 2.2 | |
<6>[ 6.884192] Bluetooth: HCI H4 protocol initialized | |
<6>[ 6.884199] Bluetooth: HCILL protocol initialized | |
<6>[ 6.884536] cpuidle: using governor ladder | |
<6>[ 6.884760] cpuidle: using governor menu | |
<6>[ 6.884800] sdhci: Secure Digital Host Controller Interface driver | |
<6>[ 6.884808] sdhci: Copyright(c) Pierre Ossman | |
<4>[ 6.884906] mmc0: Invalid maximum block size, assuming 512 bytes | |
<6>[ 6.884932] mmc0: no vmmc regulator found | |
<6>[ 6.885017] sec_touch 1-004c: maXTouch status normal | |
<7>[ 6.885030] Registered led device: mmc0:: | |
<6>[ 6.885132] mmc0: SDHCI controller on tegra [sdhci-tegra.3] using ADMA | |
<6>[ 6.885143] sdhci3: initialized irq 63 ioaddr fe600600 | |
<4>[ 6.885189] mmc1: Invalid maximum block size, assuming 512 bytes | |
<6>[ 6.885211] mmc1: no vmmc regulator found | |
<7>[ 6.885290] Registered led device: mmc1:: | |
<6>[ 6.885390] mmc1: SDHCI controller on tegra [sdhci-tegra.0] using ADMA | |
<6>[ 6.885401] sdhci0: initialized irq 46 ioaddr fe600000 | |
<7>[ 6.885566] Registered led device: tps6586x-led | |
<6>[ 6.911541] tegra-aes tegra-aes: registered | |
<6>[ 6.911890] usbcore: registered new interface driver usbhid | |
<6>[ 6.911898] usbhid: USB HID core driver | |
<6>[ 6.912199] logger: created 512K log 'log_main' | |
<6>[ 6.912291] logger: created 256K log 'log_events' | |
<6>[ 6.912376] logger: created 256K log 'log_radio' | |
<6>[ 6.912459] logger: created 256K log 'log_system' | |
<6>[ 6.912681] input: sec_keyboard as /devices/platform/sec_keyboard/input/input6 | |
<3>[ 6.912795] gpio_request: gpio-70 "accessory_en": gpio already requested | |
<4>[ 6.920047] No device for DAI WM8994 PAIFRX | |
<6>[ 6.920087] tegra_i2s_driver_probe | |
<6>[ 6.920386] WM8994 Audio Codec 0.1 | |
<6>[ 6.920425] [ wm8994_samsung.c (wm8994_i2c_probe,3200) ] | |
<6>[ 6.934870] [ wm8994_samsung.c (wm8994_init,3090) ] | |
<6>[ 6.939541] asoc: WM8994 PAIFRX <-> tegra-i2s-1 mapping ok | |
<3>[ 6.939656] Failed to add route HPOUTL->Headset Jack | |
<6>[ 6.945196] ALSA device list: | |
<6>[ 6.945204] #0: tegra (WM8994) | |
<6>[ 6.945267] GACT probability NOT on | |
<6>[ 6.945279] Mirror/redirect action on | |
<6>[ 6.945288] u32 classifier | |
<6>[ 6.945293] Actions configured | |
<6>[ 6.945301] Netfilter messages via NETLINK v0.30. | |
<6>[ 6.945366] nf_conntrack version 0.5.0 (11601 buckets, 46404 max) | |
<6>[ 6.945646] ctnetlink v0.93: registering with nfnetlink. | |
<6>[ 6.945785] xt_time: kernel timezone is -0000 | |
<6>[ 6.945977] ip_tables: (C) 2000-2006 Netfilter Core Team | |
<6>[ 6.946084] arp_tables: (C) 2002 David S. Miller | |
<6>[ 6.946128] TCP cubic registered | |
<6>[ 6.946326] NET: Registered protocol family 10 | |
<6>[ 6.946779] lo: Disabled Privacy Extensions | |
<6>[ 6.947023] Mobile IPv6 | |
<6>[ 6.947032] IPv6 over IPv4 tunneling driver | |
<6>[ 6.947350] sit0: Disabled Privacy Extensions | |
<6>[ 6.947689] ip6tnl0: Disabled Privacy Extensions | |
<6>[ 6.947753] NET: Registered protocol family 17 | |
<6>[ 6.947783] NET: Registered protocol family 15 | |
<6>[ 6.947884] Bluetooth: L2CAP ver 2.15 | |
<6>[ 6.947891] Bluetooth: L2CAP socket layer initialized | |
<6>[ 6.947907] Bluetooth: SCO (Voice Link) ver 0.6 | |
<6>[ 6.947914] Bluetooth: SCO socket layer initialized | |
<6>[ 6.947994] Bluetooth: RFCOMM TTY layer initialized | |
<6>[ 6.948009] Bluetooth: RFCOMM socket layer initialized | |
<6>[ 6.948017] Bluetooth: RFCOMM ver 1.11 | |
<6>[ 6.948024] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 | |
<6>[ 6.948032] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 | |
<4>[ 6.963099] Disabling clock uartd left on by bootloader | |
<4>[ 6.963120] Disabling clock vfir left on by bootloader | |
<4>[ 6.963148] Disabling clock pll_c_out1 left on by bootloader | |
<3>[ 6.963220] Tegra protected aperture disabled because nvmap is using system memory | |
<6>[ 6.970983] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 | |
<6>[ 6.973376] sec_jack_probe : Registering jack driver | |
<7>[ 6.973778] Board P3 : Enterring sec_jack_set_micbias_state = 1 | |
<7>[ 6.973788] Board P3 : Enterring sec_jack_set_micbias_state = 1 | |
<7>[ 6.973796] Board P3 : Enterring sec_jack_set_micbias_state = 0 | |
<6>[ 6.974915] tps6586x_rtc_read_time: 08:56:58 05/21/2011 | |
<6>[ 6.974942] tps6586x-rtc tps6586x-rtc.0: setting system clock to 2011-05-21 08:56:58 UTC (1305968218) | |
<6>[ 6.997543] mmc0: new high speed MMC card at address 0001 | |
<4>[ 6.997726] DOOGIE>> CAN TRIM !!!!!!!!!!!!!!!!!!!!!!!! | |
<6>[ 6.997806] mmcblk0: mmc0:0001 SEM32G 29.7 GiB | |
<4>[ 7.003868] Primary GPT is invalid, using alternate GPT. | |
<6>[ 7.003905] mmcblk0: p1 (䙅S) p2 (体S) p3 (乌X) p4 (偁P) p5 (䅃C) p6 (卍C) p7 (䑍M) p8 (䑕A) p9 (呏A) p10 (䥈D) | |
<4>[ 7.116238] stmpe811_adc_get_value: ADC_DATA_CH(6) = 0x0, 0. | |
<4>[ 7.156095] stmpe811_adc_get_value: ADC_DATA_CH(6) = 0x0, 0. | |
<6>[ 7.206161] Battery GPIO initialized. | |
<6>[ 7.206921] fg_read_vcell : VCELL(3866), data(0xc150) | |
<6>[ 7.207616] fg_test_print : AVG_VCELL(3838), data(0xbfef) | |
<6>[ 7.207853] fg_test_print : FULLCAP(6535), data(0x330e) | |
<6>[ 7.208089] fg_test_print : REMCAP_REP(3981), data(0x1f1a) | |
<6>[ 7.208326] fg_test_print : REMCAP_MIX(3986), data(0x1f24) | |
<6>[ 7.208562] fg_test_print : REMCAP_AV(3978), data(0x1f14) | |
<6>[ 7.208570] fg_read_current : CURRENT(-113mA), AVG_CURRENT(-124mA) | |
<6>[ 7.208581] [MAX17042] 21/5/2111 08:56, | |
<6>[ 7.212242] 0000h,ff00h,7f80h,ff01h,0000h,1f1ah,3ce9h,474ah,1ea8h,c150h,fd27h,fce2h,0010h,2e50h,3cf0h,1f24h, | |
<6>[ 7.216031] 330eh,4fc2h,7d5ah,0000h,01c7h,0148h,1e42h,0184h,478ah,bfefh,260eh,d2afh,24cah,2210h,0400h,1f14h, | |
<6>[ 7.219695] 4d78h,0092h,ff5bh,42bfh,1400h,2305h,1e40h,7518h,0076h,87a4h,506bh,0010h,e3e1h,290eh,31b5h,0000h, | |
<6>[ 7.223358] 271bh,57eeh,0800h,0000h,0592h,433ch,0100h,05e0h,0076h,1a1ch,007dh,0592h,1680h,1408h,37f5h,e000h, | |
<6>[ 7.227031] 0800h,3820h,fac9h,ee80h,c086h,270ch,7501h,ffd4h,31a1h,0ef6h,1f40h,4e00h,0492h,025ah,9147h,481dh, | |
<6>[ 7.230694] 0c47h,0af5h,0001h,167dh,0003h,0005h,fdd9h,ffffh,4c40h,000ch,4c50h,0000h,4000h,0000h,c210h,0820h, | |
<6>[ 7.234357] 0000h,0000h,0000h,0000h,0000h,0000h,2e50h,04afh,3a8dh,5117h,fceeh,c229h,006dh,3910h,c150h,2e7ch, | |
<6>[ 7.338627] fg_check_vf_fullcap_range : [Case 4] previous_vffullcap = 0x42bf, NewVfFullCap = 0x42bf | |
<6>[ 7.339834] Charger Status : TA | |
<6>[ 7.339841] Charger Status : TA | |
<6>[ 7.339846] else type charger!! | |
<6>[ 7.339852] p3_set_chg_en: Enabling the external charger | |
<6>[ 7.339860] cable NOT PRESENT | |
<6>[ 7.339865] Charger Status : TA | |
<4>[ 7.345685] stmpe811_adc_get_value: ADC_DATA_CH(6) = 0x0, 0. | |
<6>[ 7.345710] lpm_mode_check : charging_mode_from_boot(0), ta_connected(1) | |
<6>[ 7.345801] [ CONNECTOR_DRIVER (acc_con_init,491) ] | |
<6>[ 7.345852] [ CONNECTOR_DRIVER (acc_con_probe,340) ] | |
<6>[ 7.345905] [ MHL_DRIVER (SII9234A_i2c_probe,196) ] | |
<6>[ 7.345912] SII9234A attach success!!! | |
<6>[ 7.345966] [MHL SII9234A] add i2c driver | |
<6>[ 7.346003] [ MHL_DRIVER (SII9234B_i2c_probe,231) ] | |
<6>[ 7.346010] SII9234B attach success!!! | |
<6>[ 7.346057] [MHL SII9234B] add i2c driver | |
<6>[ 7.346091] [ MHL_DRIVER (SII9234C_i2c_probe,265) ] | |
<6>[ 7.346098] SII9234C attach success!!! | |
<6>[ 7.346144] [MHL SII9234C] add i2c driver | |
<6>[ 7.346179] [ MHL_DRIVER (SII9234_i2c_probe,147) ] | |
<6>[ 7.346185] SII9234 attach success!!! | |
<6>[ 7.346231] [MHL SII9234] add i2c driver | |
<6>[ 7.346358] [ CONNECTOR_DRIVER (acc_con_interrupt_init,207) ] | |
<6>[ 7.346475] [ CONNECTOR_DRIVER (acc_ID_interrupt_init,318) ] | |
<6>[ 7.346779] Freeing init memory: 168K | |
<4>[ 7.385708] stmpe811_adc_get_value: ADC_DATA_CH(6) = 0x0, 0. | |
<3>[ 7.432353] init: could not open /dev/keychord | |
<6>[ 7.435793] [sec_touch] TA/USB is connected. | |
<6>[ 7.435922] p3_TA_work_handler : 1. | |
<6>[ 7.436596] Charger Status : USB | |
<6>[ 7.436602] Charger Status : USB | |
<6>[ 7.436606] USB charger!! | |
<6>[ 7.436612] p3_set_chg_en: Enabling the external charger | |
<6>[ 7.436619] cable USB | |
<3>[ 7.439764] init: cannot open '/initlogo.rle' | |
<6>[ 7.484280] sec_touch 1-004c: maXTouch calibration in progress | |
<6>[ 7.490722] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null) | |
<6>[ 7.498602] sec_touch 1-004c: maXTouch status normal | |
<6>[ 7.500009] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null) | |
<6>[ 7.510213] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) | |
<6>[ 7.519467] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) | |
<4>[ 7.610802] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead. | |
<3>[ 7.615639] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery' | |
<3>[ 7.625685] init: cannot find '/system/bin/drmioserver', disabling 'drmio' | |
<6>[ 7.815040] warning: `adbd' uses 32-bit capabilities (legacy support in use) | |
<6>[ 7.815109] enabling adb | |
<7>[ 7.815117] usb ++ f->name=adb enable=1 | |
<7>[ 7.815299] usb enable acm | |
<7>[ 7.815412] usb enable adb | |
<7>[ 7.815592] usb disable mtp | |
<7>[ 7.815602] usb Change Device Descriptor : DeviceClass(0xef),SubClass(0x2),Protocol(0x1) | |
<7>[ 7.815613] usb Change Label : [0]UMS + ACM + ADB (Debugging mode) | |
<7>[ 7.815628] usb dev->cdev=0xe7a73bc0, dev->cdev->gadget=0xe7a41000, dev->cdev->gadget->speed=0x3, mode=1 | |
<7>[ 7.834896] usb finished setting pid=0x685e | |
<6>[ 7.835016] adb_open | |
<7>[ 8.658512] usb SET_CON w_v=1 | |
<6>[ 8.658526] android_usb gadget: high speed config #1: UMS + ACM + ADB (Debugging mode) | |
<3>[ 14.156491] init: sys_prop: permission denied uid:1013 name:audioflinger.bootsnd | |
<6>[ 15.193781] [ wm8994_samsung.c (wm8994_startup,1325) ] Turn on codec!! Power state =[1] | |
<6>[ 15.246202] [ wm8994_samsung.c (wm8994_set_dai_fmt,1058) ] | |
<6>[ 15.246929] [ wm8994_samsung.c (wm8994_set_sysclk,1031) ] clk_id =1 | |
<6>[ 15.246954] [ wm8994_samsung.c (wm8994_hw_params,1159) ] | |
<6>[ 15.248521] [ wm8994_samsung.c (configure_clock,812) ] | |
<6>[ 15.252418] [ wm8994_samsung.c (wm8994_set_path,489) ] routing to SPK | |
<6>[ 15.252423] | |
<6>[ 15.252432] [ wm8994_p3.c (wm8994_set_playback_speaker,2082) ] | |
<6>[ 15.257268] [ wm8994_p3.c (wm8994_set_codec_gain,3364) ] Set gain mode=0x1000, device=0x4, gain_bits=0x5, table_num=58, gain_code=0 | |
<6>[ 15.257282] [ wm8994_p3.c (wm8994_filter_SPK,962) ] | |
<7>[ 20.836063] -------------------------------------- | |
<7>[ 20.836073] wlan power on OK | |
<4>[ 20.948030] [HDMI] set_edid_force_pass() set = 0 | |
<7>[ 20.981050] wlan get value (1) | |
<6>[ 20.981062] tegra_sdhci_force_presence_change:tegra_wlan_pdevice->name sdhci-tegra tegra_wlan_pdevice->id 0 | |
<4>[ 20.981545] | |
<4>[ 20.981549] Dongle Host Driver, version 5.90.100.133 | |
<4>[ 20.981552] Compiled in drivers/net/wireless/bcm4330/src on May 5 2011 at 01:00:06 | |
<6>[ 21.027011] (05-21 08:57:12.532402002 47 kworker/u:1) mmc1: new high speed SDIO card at address 0001 | |
<4>[ 21.030621] (05-21 08:57:12.536009002 47 kworker/u:1) F1 signature read @0x18000000=0x16434330 | |
<4>[ 21.034088] (05-21 08:57:12.539475002 47 kworker/u:1) DHD: dongle ram size is set to 294912(orig 294912) | |
<4>[ 21.034174] (05-21 08:57:12.539561002 47 kworker/u:1) CHIP VER = [3] | |
<4>[ 21.170795] (05-21 08:57:12.676186002 47 kworker/u:1) dhdsdio_download_nvram: firmware image path = /system/etc/wifi/bcm4330_sta.bin | |
<4>[ 21.170823] (05-21 08:57:12.676209002 47 kworker/u:1) dhdsdio_download_nvram: nvram vars file path = /system/etc/wifi/nvram_net.txt | |
<4>[ 21.179461] (05-21 08:57:12.684849002 47 kworker/u:1) dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded. | |
<6>[ 21.271328] (05-21 08:57:12.776714002 157 er.ServerThread) request_suspend_state: wakeup (3->0) at 15176468003 (2011-05-21 08:57:12.776698002 UTC) | |
<4>[ 21.277194] (05-21 08:57:12.782581002 171 ScreenOffThread) [CMC623:INFO] Intensity : 255, Tuned Intensity : 1600 | |
<4>[ 21.277414] (05-21 08:57:12.782800002 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 21.291194] (05-21 08:57:12.796582002 47 kworker/u:1) Read MAC : [BC:47:60:FC:62:03] [1] | |
<4>[ 21.296591] (05-21 08:57:12.801979002 47 kworker/u:1) Firmware version = wl0: Apr 14 2011 22:18:38 version 5.90.100.171 (BTAMP WFD) | |
<4>[ 21.296607] (05-21 08:57:12.801993002 47 kworker/u:1) | |
<4>[ 21.298355] (05-21 08:57:12.803743002 47 kworker/u:1) POWER_VAL = 1 | |
<4>[ 21.378557] (05-21 08:57:12.883945002 47 kworker/u:1) eth0: Broadcom Dongle Host Driver MAC=BC:47:60:FC:62:03 | |
<4>[ 21.378599] (05-21 08:57:12.883986002 47 kworker/u:1) Enter wl_control_wl_start | |
<4>[ 21.378615] (05-21 08:57:12.884001002 47 kworker/u:1) Exited wl_control_wl_start | |
<4>[ 21.381146] (05-21 08:57:12.886537002 47 kworker/u:1) wl_iw_iscan_set_scan_broadcast_prep: First Brodcast scan was forced | |
<4>[ 21.382569] (05-21 08:57:12.887960002 47 kworker/u:1) +++: Set Broadcast ISCAN | |
<6>[ 21.887429] (05-21 08:57:13.392816002 157 er.ServerThread) request_suspend_state: wakeup (0->0) at 15792568003 (2011-05-21 08:57:13.392798002 UTC) | |
<4>[ 22.175528] (05-21 08:57:13.680916002 213 wpa_supplicant) eth0: SIOCSIWMODE MODE 2 | |
<4>[ 22.175553] (05-21 08:57:13.680941002 213 wpa_supplicant) eth0: SIOCSIWMODE MODE -427114776 SSS | |
<4>[ 22.175918] (05-21 08:57:13.681305002 213 wpa_supplicant) eth0: SIOCGIWRANGE | |
<4>[ 22.178233] (05-21 08:57:13.683621002 213 wpa_supplicant) eth0: SIOCGIWMODE | |
<4>[ 22.179294] (05-21 08:57:13.684681002 213 wpa_supplicant) eth0: SIOCSIWAP | |
<4>[ 22.215010] (05-21 08:57:13.720398002 213 wpa_supplicant) eth0: SIOCSIWAUTH, IW_AUTH_WPA_ENABLED(7), paramval = 0x1 | |
<4>[ 22.215063] (05-21 08:57:13.720451002 213 wpa_supplicant) eth0: SIOCSIWENCODEEXT | |
<4>[ 22.216975] (05-21 08:57:13.722363002 213 wpa_supplicant) eth0: SIOCSIWENCODEEXT | |
<4>[ 22.217419] (05-21 08:57:13.722807002 213 wpa_supplicant) eth0: SIOCSIWENCODEEXT | |
<4>[ 22.217945] (05-21 08:57:13.723332002 213 wpa_supplicant) eth0: SIOCSIWENCODEEXT | |
<4>[ 22.218343] (05-21 08:57:13.723729002 213 wpa_supplicant) eth0: SIOCSIWAUTH, IW_AUTH_TKIP_COUNTERMEASURES(4), paramval = 0x0 | |
<4>[ 22.219204] (05-21 08:57:13.724591002 213 wpa_supplicant) eth0: SIOCSIWAUTH, IW_AUTH_DROP_UNENCRYPTED(5), paramval = 0x1 | |
<4>[ 22.475036] (05-21 08:57:13.980425002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 22.821661] (05-21 08:57:14.327048002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 22.821681] (05-21 08:57:14.327068002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 22.821758] (05-21 08:57:14.327144002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 3009 bytes APs=15 | |
<4>[ 22.822151] (05-21 08:57:14.327537002 213 wpa_supplicant) | |
<4>[ 22.822160] (05-21 08:57:14.327547002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 22.822185] (05-21 08:57:14.327571002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 22.833337] (05-21 08:57:14.338724002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 22.833358] (05-21 08:57:14.338745002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 22.833374] (05-21 08:57:14.338761002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 0 bytes APs=0 | |
<4>[ 22.833388] (05-21 08:57:14.338774002 213 wpa_supplicant) wl_iw_iscan_get_scan: no BSSID, return EAGAIN | |
<4>[ 22.833618] (05-21 08:57:14.339005002 213 wpa_supplicant) Unknown PRIVATE command BTCOEXSCAN-STOP | |
<4>[ 22.833702] (05-21 08:57:14.339089002 213 wpa_supplicant) | |
<4>[ 22.833713] (05-21 08:57:14.339099002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 22.833741] (05-21 08:57:14.339127002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 22.838231] (05-21 08:57:14.343617002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 22.838249] (05-21 08:57:14.343635002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 22.838264] (05-21 08:57:14.343650002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 0 bytes APs=0 | |
<4>[ 22.838278] (05-21 08:57:14.343664002 213 wpa_supplicant) wl_iw_iscan_get_scan: no BSSID, return EAGAIN | |
<4>[ 22.839163] (05-21 08:57:14.344550002 213 wpa_supplicant) wl_iw_set_band: set band 0 OK | |
<4>[ 22.839733] (05-21 08:57:14.345120002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 22.839749] (05-21 08:57:14.345136002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 22.839765] (05-21 08:57:14.345151002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 0 bytes APs=0 | |
<4>[ 22.839778] (05-21 08:57:14.345164002 213 wpa_supplicant) wl_iw_iscan_get_scan: no BSSID, return EAGAIN | |
<6>[ 22.949531] (05-21 08:57:14.454917002 129 Playback Thread) [ wm8994_samsung.c (wm8994_shutdown,1348) ] Stream_state = [0x1], Codec State = [0x1] | |
<6>[ 22.949552] (05-21 08:57:14.454938002 129 Playback Thread) [ wm8994_samsung.c (wm8994_shutdown,1365) ] Turn off Codec!! | |
<6>[ 22.949567] (05-21 08:57:14.454953002 129 Playback Thread) Board P3 : Enterring wm8994_set_mic_bias | |
<4>[ 22.978966] (05-21 08:57:14.484353002 213 wpa_supplicant) | |
<4>[ 22.978977] (05-21 08:57:14.484363002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 22.979001] (05-21 08:57:14.484388002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 22.984033] (05-21 08:57:14.489420002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 23.301390] (05-21 08:57:14.806777002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 24.338892] (05-21 08:57:15.844278002 213 wpa_supplicant) | |
<4>[ 24.338903] (05-21 08:57:15.844289002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 24.338927] (05-21 08:57:15.844313002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 24.359196] (05-21 08:57:15.864587002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 27.805664] (05-21 08:57:19.311053002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 27.805799] (05-21 08:57:19.311185002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 27.805815] (05-21 08:57:19.311201002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 27.805894] (05-21 08:57:19.311280002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 3173 bytes APs=16 | |
<4>[ 27.806265] (05-21 08:57:19.311651002 213 wpa_supplicant) | |
<4>[ 27.806275] (05-21 08:57:19.311661002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 27.806300] (05-21 08:57:19.311687002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 31.251258] (05-21 08:57:22.756647002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 31.251408] (05-21 08:57:22.756794002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 31.251425] (05-21 08:57:22.756811002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 31.251496] (05-21 08:57:22.756882002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 2940 bytes APs=15 | |
<7>[ 32.314880] (05-21 08:57:23.820268001 372 Thread-9) eth0: no IPv6 routers present | |
<4>[ 32.955612] (05-21 08:57:24.461000001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 33.210570] (05-21 08:57:24.715957001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 33.534267] (05-21 08:57:25.039654001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 33.587373] (05-21 08:57:25.092761001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 34.452952] (05-21 08:57:25.958339001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 34.465782] (05-21 08:57:25.971169001 213 wpa_supplicant) | |
<4>[ 34.465793] (05-21 08:57:25.971179001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 34.465817] (05-21 08:57:25.971203001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 37.945369] (05-21 08:57:29.450758002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 37.945513] (05-21 08:57:29.450900002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 37.945530] (05-21 08:57:29.450916002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 37.945605] (05-21 08:57:29.450991002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 3003 bytes APs=15 | |
<4>[ 38.109050] (05-21 08:57:29.614437002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 38.613873] (05-21 08:57:30.119261001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 47.956700] (05-21 08:57:39.462087001 213 wpa_supplicant) | |
<4>[ 47.956712] (05-21 08:57:39.462098001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 47.956736] (05-21 08:57:39.462122001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 51.444837] (05-21 08:57:42.950225001 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 51.445016] (05-21 08:57:42.950402001 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 51.445033] (05-21 08:57:42.950419001 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 51.445099] (05-21 08:57:42.950486001 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 2799 bytes APs=15 | |
<4>[ 58.445899] (05-21 08:57:49.951290001 213 wpa_supplicant) | |
<4>[ 58.445924] (05-21 08:57:49.951313001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 58.445973] (05-21 08:57:49.951362001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 61.934179] (05-21 08:57:53.439567001 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 61.934307] (05-21 08:57:53.439693001 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 61.934323] (05-21 08:57:53.439710001 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 61.934392] (05-21 08:57:53.439778001 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 3262 bytes APs=17 | |
<4>[ 66.119455] (05-21 08:57:57.624842001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 66.125806] (05-21 08:57:57.631193001 213 wpa_supplicant) | |
<4>[ 66.125817] (05-21 08:57:57.631203001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 66.125843] (05-21 08:57:57.631229001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 69.608903] (05-21 08:58:01.114293002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 69.609113] (05-21 08:58:01.114502002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 69.609141] (05-21 08:58:01.114529002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 69.609227] (05-21 08:58:01.114615002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 2075 bytes APs=10 | |
<4>[ 71.143992] (05-21 08:58:02.649380002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 79.600743] (05-21 08:58:11.106143001 171 ScreenOffThread) [CMC623:INFO] Intensity : 243, Tuned Intensity : 1520 | |
<4>[ 79.601343] (05-21 08:58:11.106741001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.616134] (05-21 08:58:11.121524001 213 wpa_supplicant) | |
<4>[ 79.616157] (05-21 08:58:11.121546001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 79.616205] (05-21 08:58:11.121594001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 79.616579] (05-21 08:58:11.121969001 171 ScreenOffThread) [CMC623:INFO] Intensity : 231, Tuned Intensity : 1440 | |
<4>[ 79.616928] (05-21 08:58:11.122317001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.633542] (05-21 08:58:11.138929001 171 ScreenOffThread) [CMC623:INFO] Intensity : 219, Tuned Intensity : 1360 | |
<4>[ 79.633755] (05-21 08:58:11.139141001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.649799] (05-21 08:58:11.155186001 171 ScreenOffThread) [CMC623:INFO] Intensity : 208, Tuned Intensity : 1287 | |
<4>[ 79.650011] (05-21 08:58:11.155398001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.666051] (05-21 08:58:11.171439001 171 ScreenOffThread) [CMC623:INFO] Intensity : 196, Tuned Intensity : 1208 | |
<4>[ 79.666331] (05-21 08:58:11.171720001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.682710] (05-21 08:58:11.188097001 171 ScreenOffThread) [CMC623:INFO] Intensity : 184, Tuned Intensity : 1128 | |
<4>[ 79.682922] (05-21 08:58:11.188309001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.698844] (05-21 08:58:11.204231001 171 ScreenOffThread) [CMC623:INFO] Intensity : 172, Tuned Intensity : 1048 | |
<4>[ 79.699055] (05-21 08:58:11.204442001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.714187] (05-21 08:58:11.219574001 171 ScreenOffThread) [CMC623:INFO] Intensity : 161, Tuned Intensity : 975 | |
<4>[ 79.714401] (05-21 08:58:11.219788001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.732346] (05-21 08:58:11.237738001 171 ScreenOffThread) [CMC623:INFO] Intensity : 149, Tuned Intensity : 896 | |
<4>[ 79.732747] (05-21 08:58:11.238139001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.750179] (05-21 08:58:11.255568001 171 ScreenOffThread) [CMC623:INFO] Intensity : 137, Tuned Intensity : 816 | |
<4>[ 79.750472] (05-21 08:58:11.255859001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.766765] (05-21 08:58:11.272153001 171 ScreenOffThread) [CMC623:INFO] Intensity : 125, Tuned Intensity : 736 | |
<4>[ 79.767130] (05-21 08:58:11.272524001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.782128] (05-21 08:58:11.287515001 171 ScreenOffThread) [CMC623:INFO] Intensity : 114, Tuned Intensity : 663 | |
<4>[ 79.782338] (05-21 08:58:11.287724001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.798420] (05-21 08:58:11.303809001 171 ScreenOffThread) [CMC623:INFO] Intensity : 102, Tuned Intensity : 584 | |
<4>[ 79.798707] (05-21 08:58:11.304095001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.814361] (05-21 08:58:11.319748001 171 ScreenOffThread) [CMC623:INFO] Intensity : 90, Tuned Intensity : 496 | |
<4>[ 79.814572] (05-21 08:58:11.319959001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.830688] (05-21 08:58:11.336075001 171 ScreenOffThread) [CMC623:INFO] Intensity : 78, Tuned Intensity : 409 | |
<4>[ 79.830905] (05-21 08:58:11.336292001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.846365] (05-21 08:58:11.351752001 171 ScreenOffThread) [CMC623:INFO] Intensity : 67, Tuned Intensity : 329 | |
<4>[ 79.846576] (05-21 08:58:11.351963001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.862819] (05-21 08:58:11.368206001 171 ScreenOffThread) [CMC623:INFO] Intensity : 55, Tuned Intensity : 241 | |
<4>[ 79.863030] (05-21 08:58:11.368417001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.879273] (05-21 08:58:11.384669001 171 ScreenOffThread) [CMC623:INFO] Intensity : 43, Tuned Intensity : 154 | |
<4>[ 79.879802] (05-21 08:58:11.385196001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.897033] (05-21 08:58:11.402420001 171 ScreenOffThread) [CMC623:INFO] Intensity : 31, Tuned Intensity : 67 | |
<4>[ 79.897244] (05-21 08:58:11.402630001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 79.913204] (05-21 08:58:11.418591001 171 ScreenOffThread) [CMC623:INFO] Intensity : 20, Tuned Intensity : 60 | |
<4>[ 79.913414] (05-21 08:58:11.418800001 171 ScreenOffThread) [CMC623:Info] : cmc623_cabc_pwm_brightness_reg : normal mode PLUT : 66 | |
<4>[ 83.122399] (05-21 08:58:14.627787002 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 83.122514] (05-21 08:58:14.627901002 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 83.122531] (05-21 08:58:14.627917002 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 83.122604] (05-21 08:58:14.627990002 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 3205 bytes APs=17 | |
<4>[ 90.130045] (05-21 08:58:21.635433002 213 wpa_supplicant) | |
<4>[ 90.130058] (05-21 08:58:21.635444002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 90.130083] (05-21 08:58:21.635469002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 93.626349] (05-21 08:58:25.131758001 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 93.626940] (05-21 08:58:25.132345001 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 93.627079] (05-21 08:58:25.132484001 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 93.627450] (05-21 08:58:25.132853001 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 1874 bytes APs=9 | |
<4>[ 94.399374] (05-21 08:58:25.904762001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 94.504737] (05-21 08:58:26.010124001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 107.636269] (05-21 08:58:39.141659001 213 wpa_supplicant) | |
<4>[ 107.636294] (05-21 08:58:39.141683001 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 107.636342] (05-21 08:58:39.141731001 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 111.128164] (05-21 08:58:42.633559001 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 111.128473] (05-21 08:58:42.633867001 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 111.128540] (05-21 08:58:42.633933001 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 111.128773] (05-21 08:58:42.634167001 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 2734 bytes APs=14 | |
<4>[ 126.124238] (05-21 08:58:57.629625002 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done | |
<4>[ 126.137181] (05-21 08:58:57.642571002 213 wpa_supplicant) | |
<4>[ 126.137204] (05-21 08:58:57.642592002 213 wpa_supplicant) ### wl_iw_set_cscan: info->cmd:8b0c, info->flags:0, u.data=0xbebf6924, u.len=33 | |
<4>[ 126.137250] (05-21 08:58:57.642638002 213 wpa_supplicant) wl_iw_combined_scan_set nssid=2 nchan=1 | |
<4>[ 129.616483] (05-21 08:59:01.121872001 199 iscan_sysioc) Send Event ISCAN complete | |
<4>[ 129.616628] (05-21 08:59:01.122014001 213 wpa_supplicant) eth0 wl_iw_iscan_get_scan buflen_from_user 8192: | |
<4>[ 129.616644] (05-21 08:59:01.122031001 213 wpa_supplicant) eth0: SIOCGIWSCAN GET broadcast results | |
<4>[ 129.616716] (05-21 08:59:01.122102001 213 wpa_supplicant) wl_iw_iscan_get_scan return to WE 2919 bytes APs=15 | |
<4>[ 131.161386] (05-21 08:59:02.666773001 213 wpa_supplicant) wl_iw_set_btcoex_dhcp: DHCP session done |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment