Created
September 23, 2015 12:29
-
-
Save tetsu-koba/c84f7499201d113bae08 to your computer and use it in GitHub Desktop.
Bootlog of Debian jessie armhf on Raspberry Pi 2
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Uncompressing Linux... done, booting the kernel. | |
? | |
Welcome to the rescue system | |
recovery login: Uncompressing Linux... done, booting the kernel. | |
[ 0.000000] Booting Linux on physical CPU 0xf00 | |
[ 0.000000] Initializing cgroup subsys cpuset | |
[ 0.000000] Initializing cgroup subsys cpu | |
[ 0.000000] Initializing cgroup subsys cpuacct | |
[ 0.000000] Linux version 4.1.7-v7+ (koba@f0a4f48bb49b) (gcc version 4.8.3 20140303 (prerelease) (crosstool-NG linaro-1.13.1+bzr2650 - Linaro GCC 2014.03) ) #2 SMP PREEMPT Wed Sep 23 11:39:37 JST 2015 | |
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] Machine model: Raspberry Pi 2 Model B | |
[ 0.000000] cma: Reserved 8 MiB at 0x3a800000 | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010) | |
[ 0.000000] [bcm2709_smp_init_cpus] ncores=4 | |
[ 0.000000] PERCPU: Embedded 13 pages/cpu @b9f64000 s20608 r8192 d24448 u53248 | |
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239540 | |
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=592 bcm2708_fb.fbheight=448 bcm2709.boardrev=0xa01041 bcm2709.serial=0xf6b0477e smsc95xx.macaddr=B8:27:EB:B0:47:7E bcm2708_fb.fbswap=1 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 root=/dev/nfs nfsroot=192.168.0.6:/export/armhf_jessie rw ip=dhcp elevator=deadline rootwait | |
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) | |
[ 0.000000] Memory: 939512K/966656K available (5958K kernel code, 534K rwdata, 1648K rodata, 416K init, 757K bss, 18952K reserved, 8192K cma-reserved) | |
[ 0.000000] Virtual kernel memory layout: | |
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB) | |
[ 0.000000] vmalloc : 0xbb800000 - 0xff000000 (1080 MB) | |
[ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB) | |
[ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB) | |
[ 0.000000] .text : 0x80008000 - 0x80775cd0 (7608 kB) | |
[ 0.000000] .init : 0x80776000 - 0x807de000 ( 416 kB) | |
[ 0.000000] .data : 0x807de000 - 0x80863af4 ( 535 kB) | |
[ 0.000000] .bss : 0x80866000 - 0x8092378c ( 758 kB) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 | |
[ 0.000000] Preemptible hierarchical RCU implementation. | |
[ 0.000000] Additional per-CPU info printed with stalls. | |
[ 0.000000] NR_IRQS:608 | |
[ 0.000000] Architected cp15 timer(s) running at 19.20MHz (virt). | |
[ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns | |
[ 0.000010] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns | |
[ 0.000032] Switching to timer-based delay loop, resolution 52ns | |
[ 0.000323] Console: colour dummy device 80x30 | |
[ 0.000365] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) | |
[ 0.000390] pid_max: default: 32768 minimum: 301 | |
[ 0.000723] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.000744] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) | |
[ 0.002018] Initializing cgroup subsys blkio | |
[ 0.002058] Initializing cgroup subsys memory | |
[ 0.002095] Initializing cgroup subsys devices | |
[ 0.002122] Initializing cgroup subsys freezer | |
[ 0.002164] Initializing cgroup subsys net_cls | |
[ 0.002238] CPU: Testing write buffer coherency: ok | |
[ 0.002321] ftrace: allocating 20207 entries in 60 pages | |
[ 0.051753] CPU0: update cpu_capacity 1024 | |
[ 0.051791] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 | |
[ 0.051809] [bcm2709_smp_prepare_cpus] enter | |
[ 0.051949] Setting up static identity map for 0x8240 - 0x8274 | |
[ 0.111621] [bcm2709_boot_secondary] cpu:1 started (0) 18 | |
[ 0.112052] [bcm2709_secondary_init] enter cpu:1 | |
[ 0.112103] CPU1: update cpu_capacity 1024 | |
[ 0.112111] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 | |
[ 0.131602] [bcm2709_boot_secondary] cpu:2 started (0) 18 | |
[ 0.131958] [bcm2709_secondary_init] enter cpu:2 | |
[ 0.131989] CPU2: update cpu_capacity 1024 | |
[ 0.131998] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 | |
[ 0.151640] [bcm2709_boot_secondary] cpu:3 started (0) 18 | |
[ 0.151894] [bcm2709_secondary_init] enter cpu:3 | |
[ 0.151923] CPU3: update cpu_capacity 1024 | |
[ 0.151931] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 | |
[ 0.152021] Brought up 4 CPUs | |
[ 0.152051] SMP: Total of 4 processors activated (153.60 BogoMIPS). | |
[ 0.152062] CPU: All CPU(s) started in SVC mode. | |
[ 0.153040] devtmpfs: initialized | |
[ 0.177898] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 | |
[ 0.178224] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.179335] pinctrl core: initialized pinctrl subsystem | |
[ 0.180142] NET: Registered protocol family 16 | |
[ 0.185892] DMA: preallocated 4096 KiB pool for atomic coherent allocations | |
[ 0.187080] bcm2709.uart_clock = 3000000 | |
[ 0.192354] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. | |
[ 0.192371] hw-breakpoint: maximum watchpoint size is 8 bytes. | |
[ 0.192565] Serial: AMBA PL011 UART driver | |
[ 0.192752] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2 | |
[ 0.689875] console [ttyAMA0] enabled | |
[ 0.694108] bcm2835-mbox 3f00b880.mailbox: mailbox enabled | |
[ 0.774167] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35 | |
[ 0.782868] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy) | |
[ 0.791228] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver | |
[ 0.798118] bcm2708-dmaengine 3f007000.dma: dma_debug:0 | |
[ 0.804059] SCSI subsystem initialized | |
[ 0.808044] usbcore: registered new interface driver usbfs | |
[ 0.813651] usbcore: registered new interface driver hub | |
[ 0.819094] usbcore: registered new device driver usb | |
[ 0.824853] raspberrypi-firmware soc:firmware: Attached to firmware from 2015-04-21 14:42 | |
[ 1.335356] Switched to clocksource arch_sys_counter | |
[ 1.389376] FS-Cache: Loaded | |
[ 1.392620] CacheFiles: Loaded | |
[ 1.407400] NET: Registered protocol family 2 | |
[ 1.413077] TCP established hash table entries: 8192 (order: 3, 32768 bytes) | |
[ 1.420306] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) | |
[ 1.426986] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 1.433450] UDP hash table entries: 512 (order: 2, 16384 bytes) | |
[ 1.439445] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) | |
[ 1.446165] NET: Registered protocol family 1 | |
[ 1.450956] RPC: Registered named UNIX socket transport module. | |
[ 1.456942] RPC: Registered udp transport module. | |
[ 1.461643] RPC: Registered tcp transport module. | |
[ 1.466374] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 1.474036] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available | |
[ 1.483603] futex hash table entries: 1024 (order: 4, 65536 bytes) | |
[ 1.505683] VFS: Disk quotas dquot_6.6.0 | |
[ 1.509986] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
[ 1.519547] FS-Cache: Netfs 'nfs' registered for caching | |
[ 1.526070] NFS: Registering the id_resolver key type | |
[ 1.531214] Key type id_resolver registered | |
[ 1.535435] Key type id_legacy registered | |
[ 1.542262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) | |
[ 1.549895] io scheduler noop registered | |
[ 1.553829] io scheduler deadline registered (default) | |
[ 1.559308] io scheduler cfq registered | |
[ 1.565773] BCM2708FB: allocated DMA memory fac00000 | |
[ 1.570768] BCM2708FB: allocated DMA channel 0 @ f3007000 | |
[ 1.581683] Console: switching to colour frame buffer device 74x28 | |
[ 1.591499] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled | |
[ 1.599168] vc-cma: Videocore CMA driver | |
[ 1.603090] vc-cma: vc_cma_base = 0x00000000 | |
[ 1.607817] vc-cma: vc_cma_size = 0x00000000 (0 MiB) | |
[ 1.613208] vc-cma: vc_cma_initial = 0x00000000 (0 MiB) | |
[ 1.618864] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB) | |
[ 1.642811] brd: module loaded | |
[ 1.654842] loop: module loaded | |
[ 1.659098] vchiq: vchiq_init_state: slot_zero = 0xbac80000, is_master = 0 | |
[ 1.667003] bcm2835_vchiq 3f00b840.vchiq: failed to set channelbase | |
[ 1.673616] vchiq: could not load vchiq | |
[ 1.677585] bcm2835_vchiq: probe of 3f00b840.vchiq failed with error -1178945280 | |
[ 1.685109] Loading iSCSI transport class v2.0-870. | |
[ 1.690945] usbcore: registered new interface driver smsc95xx | |
[ 1.696787] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) | |
[ 1.902881] Core Release: 2.80a | |
[ 1.906068] Setting default values for core params | |
[ 1.910888] Finished setting default values for core params | |
[ 2.116874] Using Buffer DMA mode | |
[ 2.120188] Periodic Transfer Interrupt Enhancement - disabled | |
[ 2.126034] Multiprocessor Interrupt Enhancement - disabled | |
[ 2.131599] OTG VER PARAM: 0, OTG VER FLAG: 0 | |
[ 2.135976] Dedicated Tx FIFOs mode | |
[ 2.139809] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xbac14000 dma = 0xfac14000 len=9024 | |
[ 2.149686] FIQ FSM acceleration enabled for : | |
[ 2.149686] Non-periodic Split Transactions | |
[ 2.149686] Periodic Split Transactions | |
[ 2.149686] High-Speed Isochronous Endpoints | |
[ 2.166471] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80401108 | |
[ 2.172389] WARN::hcd_init_fiq:413: FIQ ASM at 0x80401464 length 36 | |
[ 2.178652] WARN::hcd_init_fiq:438: MPHI regs_base at 0xbb89a000 | |
[ 2.184718] dwc_otg 3f980000.usb: DWC OTG Controller | |
[ 2.189744] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 | |
[ 2.197103] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000 | |
[ 2.202709] Init: Port Power? op_state=1 | |
[ 2.206652] Init: Power Port (0) | |
[ 2.210172] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
[ 2.216988] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
[ 2.224204] usb usb1: Product: DWC OTG Controller | |
[ 2.228932] usb usb1: Manufacturer: Linux 4.1.7-v7+ dwc_otg_hcd | |
[ 2.234847] usb usb1: SerialNumber: 3f980000.usb | |
[ 2.240345] hub 1-0:1.0: USB hub found | |
[ 2.244145] hub 1-0:1.0: 1 port detected | |
[ 2.249103] usbcore: registered new interface driver usb-storage | |
[ 2.255433] mousedev: PS/2 mouse device common for all mice | |
[ 2.261844] bcm2835-cpufreq: min=600000 max=900000 | |
[ 2.267010] sdhci: Secure Digital Host Controller Interface driver | |
[ 2.273183] sdhci: Copyright(c) Pierre Ossman | |
[ 2.278006] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0 | |
[ 2.283837] mmc-bcm2835 3f300000.mmc: DMA channels allocated | |
[ 2.325724] sdhci-pltfm: SDHCI platform and OF driver helper | |
[ 2.336424] ledtrig-cpu: registered to indicate activity on CPUs | |
[ 2.342732] hidraw: raw HID events driver (C) Jiri Kosina | |
[ 2.349505] usbcore: registered new interface driver usbhid | |
[ 2.355151] usbhid: USB HID core driver | |
[ 2.361509] Initializing XFRM netlink socket | |
[ 2.365926] NET: Registered protocol family 17 | |
[ 2.373865] Key type dns_resolver registered | |
[ 2.378811] Registering SWP/SWPB emulation handler | |
[ 2.384589] registered taskstats version 1 | |
[ 2.389009] vc-sm: Videocore shared memory driver | |
[ 2.403251] mmc0: host does not support reading read-only switch, assuming write-enable | |
[ 2.413559] mmc0: new high speed SDHC card at address 1234 | |
[ 2.419655] mmcblk0: mmc0:1234 SA08G 7.28 GiB | |
[ 2.429874] mmcblk0: p1 p2 < p5 p6 p7 > p3 | |
[ 2.445529] Indeed it is in host mode hprt0 = 00021501 | |
[ 2.625398] usb 1-1: new high-speed USB device number 2 using dwc_otg | |
[ 2.632008] Indeed it is in host mode hprt0 = 00001101 | |
[ 2.835755] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 | |
[ 2.842457] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 2.850439] hub 1-1:1.0: USB hub found | |
[ 2.854305] hub 1-1:1.0: 5 ports detected | |
[ 3.135396] usb 1-1.1: new high-speed USB device number 3 using dwc_otg | |
[ 3.255706] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
[ 3.262581] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
[ 3.272719] smsc95xx v1.0.4 | |
[ 3.339534] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b0:47:7e | |
[ 3.458021] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup | |
[ 4.909771] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 | |
[ 4.945393] Sending DHCP requests ., OK | |
[ 5.255385] IP-Config: Got DHCP answer from 192.168.0.1, my address is 192.168.0.7 | |
[ 5.263241] IP-Config: Complete: | |
[ 5.266516] device=eth0, hwaddr=b8:27:eb:b0:47:7e, ipaddr=192.168.0.7, mask=255.255.255.0, gw=192.168.0.1 | |
[ 5.276573] host=192.168.0.7, domain=, nis-domain=(none) | |
[ 5.282329] bootserver=0.0.0.0, rootserver=192.168.0.6, rootpath= | |
[ 5.288717] nameserver0=192.168.0.1 | |
[ 5.293142] uart-pl011 3f201000.uart: no DMA platform data | |
[ 5.414559] VFS: Mounted root (nfs filesystem) on device 0:15. | |
[ 5.421775] devtmpfs: mounted | |
[ 5.425520] Freeing unused kernel memory: 416K (80776000 - 807de000) | |
[ 6.117427] random: systemd urandom read with 117 bits of entropy available | |
[ 6.128587] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR) | |
[ 6.142654] systemd[1]: Detected architecture 'arm'. | |
Welcome to Debian GNU/Linux 8 (jessie)! | |
[ 6.204179] systemd[1]: Failed to insert module 'ipv6' | |
[ 6.213455] systemd[1]: Set hostname to <armhf-jessie00>. | |
[ 6.406759] random: nonblocking pool is initialized | |
[ 7.346344] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory. | |
[ 7.359417] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. | |
[ 7.377466] systemd[1]: Expecting device dev-ttyAMA0.device... | |
Expecting device dev-ttyAMA0.device... | |
[ 7.405626] systemd[1]: Starting Forward Password Requests to Wall Directory Watch. | |
[ 7.413739] systemd[1]: Started Forward Password Requests to Wall Directory Watch. | |
[ 7.421542] systemd[1]: Starting Remote File Systems (Pre). | |
[ OK ] Reached target Remote File Systems (Pre). | |
[ 7.445563] systemd[1]: Reached target Remote File Systems (Pre). | |
[ 7.451854] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch. | |
[ 7.460336] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. | |
[ 7.468450] systemd[1]: Starting Paths. | |
[ OK ] Reached target Paths. | |
[ 7.485549] systemd[1]: Reached target Paths. | |
[ 7.490029] systemd[1]: Starting Encrypted Volumes. | |
[ OK ] Reached target Encrypted Volumes. | |
[ 7.515533] systemd[1]: Reached target Encrypted Volumes. | |
[ 7.521161] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point. | |
[ OK ] Set up automount Arbitrary Executable File Formats F...utomount Point. | |
[ 7.555566] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. | |
[ 7.565110] systemd[1]: Starting Swap. | |
[ OK ] Reached target Swap. | |
[ 7.585547] systemd[1]: Reached target Swap. | |
[ 7.589902] systemd[1]: Starting Root Slice. | |
[ OK ] Created slice Root Slice. | |
[ 7.615552] systemd[1]: Created slice Root Slice. | |
[ 7.620337] systemd[1]: Starting User and Session Slice. | |
[ OK ] Created slice User and Session Slice. | |
[ 7.645544] systemd[1]: Created slice User and Session Slice. | |
[ 7.651412] systemd[1]: Starting /dev/initctl Compatibility Named Pipe. | |
[ OK ] Listening on /dev/initctl Compatibility Named Pipe. | |
[ 7.675544] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. | |
[ 7.682627] systemd[1]: Starting Delayed Shutdown Socket. | |
[ OK ] Listening on Delayed Shutdown Socket. | |
[ 7.705542] systemd[1]: Listening on Delayed Shutdown Socket. | |
[ 7.711406] systemd[1]: Starting Journal Socket (/dev/log). | |
[ OK ] Listening on Journal Socket (/dev/log). | |
[ 7.735564] systemd[1]: Listening on Journal Socket (/dev/log). | |
[ 7.741606] systemd[1]: Starting udev Control Socket. | |
[ OK ] Listening on udev Control Socket. | |
[ 7.765545] systemd[1]: Listening on udev Control Socket. | |
[ 7.771098] systemd[1]: Starting udev Kernel Socket. | |
[ OK ] Listening on udev Kernel Socket. | |
[ 7.795539] systemd[1]: Listening on udev Kernel Socket. | |
[ 7.800971] systemd[1]: Starting Journal Socket. | |
[ OK ] Listening on Journal Socket. | |
[ 7.825539] systemd[1]: Listening on Journal Socket. | |
[ 7.830627] systemd[1]: Starting System Slice. | |
[ OK ] Created slice System Slice. | |
[ 7.855563] systemd[1]: Created slice System Slice. | |
[ 7.860533] systemd[1]: Starting system-getty.slice. | |
[ OK ] Created slice system-getty.slice. | |
[ 7.885550] systemd[1]: Created slice system-getty.slice. | |
[ 7.891069] systemd[1]: Starting system-serial\x2dgetty.slice. | |
[ OK ] Created slice system-serial\x2dgetty.slice. | |
[ 7.915545] systemd[1]: Created slice system-serial\x2dgetty.slice. | |
[ 7.922077] systemd[1]: Starting Increase datagram queue length... | |
Starting Increase datagram queue length... | |
[ 7.949152] systemd[1]: Mounting Debug File System... | |
Mounting Debug File System... | |
[ 7.978837] systemd[1]: Started Create list of required static device nodes for the current kernel. | |
[ 7.988430] systemd[1]: Starting udev Coldplug all Devices... | |
Starting udev Coldplug all Devices... | |
[ 8.019000] systemd[1]: Mounted Huge Pages File System. | |
[ 8.103791] systemd[1]: Started Set Up Additional Binary Formats. | |
[ 8.179827] systemd[1]: Starting Load Kernel Modules... | |
Starting Load Kernel Modules... | |
[ 8.214101] systemd[1]: Mounting POSIX Message Queue File System... | |
Mounting POSIX Message Queue File System... | |
[ 8.249758] systemd[1]: Starting Create Static Device Nodes in /dev... | |
Starting Create Static Device Nodes in /dev... | |
[ 8.279361] systemd[1]: Starting Slices. | |
[ OK ] Reached target Slices. | |
[ 8.288765] systemd[1]: Reached target Slices. | |
[ 8.294412] systemd[1]: Starting Remount Root and Kernel File Systems... | |
Starting Remount Root and Kernel File Systems... | |
[ OK ] Started Load Kernel Modules. | |
[ 8.355826] systemd[1]: Started Load Kernel Modules. | |
[ OK ] Started Increase datagram queue length. | |
[ 8.484368] systemd[1]: Started Increase datagram queue length. | |
[ OK ] Mounted Debug File System. | |
[ 8.515798] systemd[1]: Mounted Debug File System. | |
[ OK ] Mounted POSIX Message Queue File System. | |
[ 8.545634] systemd[1]: Mounted POSIX Message Queue File System. | |
[ OK ] Started Remount Root and Kernel File Systems. | |
[ 8.575708] systemd[1]: Started Remount Root and Kernel File Systems. | |
[ OK ] Started udev Coldplug all Devices. | |
[ 8.605652] systemd[1]: Started udev Coldplug all Devices. | |
[ OK ] Started Create Static Device Nodes in /dev. | |
[ 8.665662] systemd[1]: Started Create Static Device Nodes in /dev. | |
[ 8.822445] systemd[1]: Starting udev Kernel Device Manager... | |
Starting udev Kernel Device Manager... | |
[ 8.851299] systemd[1]: Started Various fixups to make systemd work better on Debian. | |
[ 8.859844] systemd[1]: Starting Load/Save Random Seed... | |
Starting Load/Save Random Seed... | |
[ 8.891647] systemd[1]: Starting Local File Systems (Pre). | |
[ OK ] Reached target Local File Systems (Pre). | |
[ 8.915798] systemd[1]: Reached target Local File Systems (Pre). | |
[ 8.922849] systemd[1]: Starting Local File Systems. | |
[ OK ] Reached target Local File Systems. | |
[ 8.946213] systemd[1]: Reached target Local File Systems. | |
[ 8.953883] systemd[1]: Starting Create Volatile Files and Directories... | |
Starting Create Volatile Files and Directories... | |
[ 8.979948] systemd[1]: Starting Remote File Systems. | |
[ OK ] Reached target Remote File Systems. | |
[ 9.005701] systemd[1]: Reached target Remote File Systems. | |
[ 9.011874] systemd[1]: Starting Syslog Socket. | |
[ OK ] Listening on Syslog Socket. | |
[ 9.035722] systemd[1]: Listening on Syslog Socket. | |
[ 9.040951] systemd[1]: Starting Sockets. | |
[ OK ] Reached target Sockets. | |
[ 9.065258] systemd-udevd[92]: starting version 215 | |
[ 9.087522] systemd[1]: Reached target Sockets. | |
[ 9.094041] systemd[1]: Starting Journal Service... | |
Starting Journal Service... | |
[ OK ] Started Journal Service. | |
[ 9.135677] systemd[1]: Started Journal Service. | |
Starting Trigger Flushing of Journal to Persistent Storage... | |
Mounting Configuration File System... | |
Starting Apply Kernel Variables... | |
[ OK ] Started udev Kernel Device Manager. | |
[ OK ] Started Load/Save Random Seed. | |
Starting LSB: Raise network interfaces.... | |
Starting Copy rules generated while the root was ro... | |
[ OK ] Mounted Configuration File System. | |
[ OK ] Started Apply Kernel Variables. | |
[ OK ] Started Copy rules generated while the root was ro. | |
[ OK ] Started Trigger Flushing of Journal to Persistent Storage. | |
[ 9.605330] systemd-journald[96]: Received request to flush runtime journal from PID 1 | |
[ OK ] Started Create Volatile Files and Directories. | |
Starting Update UTMP about System Boot/Shutdown... | |
[ OK ] Started Update UTMP about System Boot/Shutdown. | |
[ OK ] Found device /dev/ttyAMA0. | |
[ OK ] Started LSB: Raise network interfaces.. | |
[ OK ] Reached target Network. | |
[ OK ] Reached target System Initialization. | |
[ OK ] Reached target Timers. | |
[ OK ] Reached target Basic System. | |
Starting Regular background program processing daemon... | |
[ OK ] Started Regular background program processing daemon. | |
Starting OpenBSD Secure Shell server... | |
[ OK ] Started OpenBSD Secure Shell server. | |
Starting /etc/rc.local Compatibility... | |
Starting getty on tty2-tty6 if dbus and logind are not available... | |
Starting System Logging Service... | |
Starting Permit User Sessions... | |
[ OK ] Started /etc/rc.local Compatibility. | |
[ OK ] Started Permit User Sessions. | |
Starting Getty on tty5... | |
[ OK ] Started Getty on tty5. | |
Starting Getty on tty4... | |
[ OK ] Started Getty on tty4. | |
Starting Getty on tty3... | |
[ OK ] Started Getty on tty3. | |
Starting Getty on tty2... | |
[ OK ] Started Getty on tty2. | |
Starting Getty on tty1... | |
[ OK ] Started Getty on tty1. | |
Starting Serial Getty on ttyAMA0... | |
[ OK ] Started Serial Getty on ttyAMA0. | |
[ OK ] Started System Logging Service. | |
Starting Getty on tty6... | |
[ OK ] Started Getty on tty6. | |
[ OK ] Started getty on tty2-tty6 if dbus and logind are not available. | |
[ OK ] Reached target Login Prompts. | |
[ OK ] Reached target Multi-User System. | |
[ OK ] Reached target Graphical Interface. | |
Starting Update UTMP about System Runlevel Changes... | |
[ OK ] Started Update UTMP about System Runlevel Changes. | |
Debian GNU/Linux 8 armhf-jessie00 ttyAMA0 | |
armhf-jessie00 login: user | |
Password: | |
Last login: Thu Jan 1 09:42:31 JST 1970 from 192.168.0.3 on pts/0 | |
Linux armhf-jessie00 4.1.7-v7+ #2 SMP PREEMPT Wed Sep 23 11:39:37 JST 2015 armv7l | |
The programs included with the Debian GNU/Linux system are free software; | |
the exact distribution terms for each program are described in the | |
individual files in /usr/share/doc/*/copyright. | |
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent | |
permitted by applicable law. | |
user@armhf-jessie00:~$ ps ax | |
PID TTY STAT TIME COMMAND | |
1 ? Ss 0:03 /sbin/init | |
2 ? S 0:00 [kthreadd] | |
3 ? S 0:00 [ksoftirqd/0] | |
4 ? S 0:00 [kworker/0:0] | |
5 ? S< 0:00 [kworker/0:0H] | |
6 ? S 0:00 [kworker/u8:0] | |
7 ? S 0:00 [rcu_preempt] | |
8 ? S 0:00 [rcu_sched] | |
9 ? S 0:00 [rcu_bh] | |
10 ? S 0:00 [migration/0] | |
11 ? S 0:00 [migration/1] | |
12 ? S 0:00 [ksoftirqd/1] | |
13 ? S 0:00 [kworker/1:0] | |
14 ? S< 0:00 [kworker/1:0H] | |
15 ? S 0:00 [migration/2] | |
16 ? S 0:00 [ksoftirqd/2] | |
17 ? S 0:00 [kworker/2:0] | |
18 ? S< 0:00 [kworker/2:0H] | |
19 ? S 0:00 [migration/3] | |
20 ? S 0:00 [ksoftirqd/3] | |
21 ? S 0:00 [kworker/3:0] | |
22 ? S< 0:00 [kworker/3:0H] | |
23 ? S< 0:00 [khelper] | |
24 ? S 0:00 [kdevtmpfs] | |
25 ? S< 0:00 [netns] | |
26 ? S< 0:00 [perf] | |
27 ? S 0:00 [khungtaskd] | |
28 ? S< 0:00 [writeback] | |
29 ? S< 0:00 [crypto] | |
30 ? S< 0:00 [bioset] | |
31 ? S< 0:00 [kblockd] | |
32 ? S 0:00 [kworker/1:1] | |
33 ? S< 0:00 [rpciod] | |
34 ? S 0:00 [kswapd0] | |
35 ? S 0:00 [fsnotify_mark] | |
36 ? S< 0:00 [nfsiod] | |
42 ? S< 0:00 [kthrotld] | |
43 ? S 0:00 [kworker/0:1] | |
44 ? S< 0:00 [VCHIQ-0] | |
45 ? S< 0:00 [VCHIQr-0] | |
46 ? S< 0:00 [VCHIQs-0] | |
47 ? S< 0:00 [iscsi_eh] | |
48 ? S< 0:00 [dwc_otg] | |
49 ? S< 0:00 [DWC Notificatio] | |
50 ? S 0:00 [kworker/u8:1] | |
51 ? S< 0:00 [deferwq] | |
52 ? S 0:00 [kworker/u8:2] | |
53 ? S 0:00 [mmcqd/0] | |
54 ? S 0:00 [kworker/1:2] | |
55 ? S 0:00 [kworker/2:1] | |
56 ? S 0:00 [kworker/0:2] | |
57 ? S< 0:00 [kworker/0:1H] | |
58 ? S< 0:00 [kworker/1:1H] | |
64 ? S< 0:00 [kworker/3:1H] | |
71 ? S< 0:00 [kworker/2:1H] | |
72 ? S 0:00 [kworker/3:1] | |
88 ? S 0:00 [kworker/2:2] | |
92 ? Ss 0:00 /lib/systemd/systemd-udevd | |
96 ? Ss 0:00 /lib/systemd/systemd-journald | |
107 ? S 0:00 [kworker/1:3] | |
114 ? S 0:00 [kworker/3:2] | |
170 ? Ss 0:00 /usr/sbin/cron -f | |
171 ? Ss 0:00 /usr/sbin/sshd -D | |
175 ? Ssl 0:00 /usr/sbin/rsyslogd -n | |
178 tty5 Ss+ 0:00 /sbin/agetty --noclear tty5 linux | |
179 tty4 Ss+ 0:00 /sbin/agetty --noclear tty4 linux | |
180 tty3 Ss+ 0:00 /sbin/agetty --noclear tty3 linux | |
181 tty2 Ss+ 0:00 /sbin/agetty --noclear tty2 linux | |
187 tty1 Ss+ 0:00 /sbin/agetty --noclear tty1 linux | |
188 ? Ss 0:00 /bin/login -- | |
189 tty6 Ss+ 0:00 /sbin/agetty --noclear tty6 linux | |
215 ttyAMA0 S 0:00 -bash | |
220 ttyAMA0 R+ 0:00 ps ax | |
user@armhf-jessie00:~$ |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment