Created
June 6, 2012 18:54
-
-
Save thom-nic/2883890 to your computer and use it in GitHub Desktop.
Raspberry Pi wifi adapter dmesg output
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Linux version 3.1.9+ (dc4@dc4-arm-01) (gcc version 4.5.1 (Broadcom-2708) ) #52 Tue May 8 23:49:32 BST 2012 | |
CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d | |
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache | |
Machine: BCM2708 | |
Memory policy: ECC disabled, Data cache writeback | |
On node 0 totalpages: 57344 | |
free_area_init_node: node 0, pgdat c03bb910, node_mem_map c0408000 | |
Normal zone: 448 pages used for memmap | |
Normal zone: 0 pages reserved | |
Normal zone: 56896 pages, LIFO batch:15 | |
pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 | |
pcpu-alloc: [0] 0 | |
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 56896 | |
Kernel command line: dma.dmachans=0x3c bcm2708_fb.fbwidth=1504 bcm2708_fb.fbheight=1104 bcm2708.boardrev=0x2 bcm2708.serial=0x3660bc2 smsc95xx.macaddr=B8:27:EB:66:0B:C2 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait | |
PID hash table entries: 1024 (order: 0, 4096 bytes) | |
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) | |
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) | |
Memory: 224MB = 224MB total | |
Memory: 223208k/223208k available, 6168k reserved, 0K highmem | |
Virtual kernel memory layout: | |
vector : 0xffff0000 - 0xffff1000 ( 4 kB) | |
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) | |
DMA : 0xffc00000 - 0xffe00000 ( 2 MB) | |
vmalloc : 0xce800000 - 0xd8000000 ( 152 MB) | |
lowmem : 0xc0000000 - 0xce000000 ( 224 MB) | |
modules : 0xbf000000 - 0xc0000000 ( 16 MB) | |
.text : 0xc0008000 - 0xc0381000 (3556 kB) | |
.init : 0xc0381000 - 0xc039e000 ( 116 kB) | |
.data : 0xc039e000 - 0xc03bbfa0 ( 120 kB) | |
.bss : 0xc03bbfc4 - 0xc0407478 ( 302 kB) | |
NR_IRQS:85 | |
timer_set_mode: unhandled mode:1 | |
timer_set_mode: unhandled mode:3 | |
Console: colour dummy device 80x30 | |
console [tty1] enabled | |
Calibrating delay loop... 795.44 BogoMIPS (lpj=3977216) | |
pid_max: default: 32768 minimum: 301 | |
Mount-cache hash table entries: 512 | |
CPU: Testing write buffer coherency: ok | |
devtmpfs: initialized | |
NET: Registered protocol family 16 | |
vc-mem: mm_vc_mem_phys_addr = 0x00000000 | |
vc-mem: mm_vc_mem_size = 0x10000000 (256 MiB) | |
mailbox: Broadcom VideoCore Mailbox driver | |
bcm2708_vcio: mailbox at f200b880 | |
bcm_power: Broadcom power driver | |
bcm_power_open() -> 0 | |
bcm_power_request(0, 8) | |
bcm_mailbox_read -> 00000080, 0 | |
bcm_power_request -> 0 | |
Serial: AMBA PL011 UART driver | |
dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3 | |
console [ttyAMA0] enabled | |
bio: create slab <bio-0> at 0 | |
SCSI subsystem initialized | |
usbcore: registered new interface driver usbfs | |
usbcore: registered new interface driver hub | |
usbcore: registered new device driver usb | |
Switching to clocksource stc | |
FS-Cache: Loaded | |
CacheFiles: Loaded | |
Switched to NOHz mode on CPU #0 | |
NET: Registered protocol family 2 | |
IP route cache hash table entries: 2048 (order: 1, 8192 bytes) | |
TCP established hash table entries: 8192 (order: 4, 65536 bytes) | |
TCP bind hash table entries: 8192 (order: 3, 32768 bytes) | |
TCP: Hash tables configured (established 8192 bind 8192) | |
TCP reno registered | |
UDP hash table entries: 256 (order: 0, 4096 bytes) | |
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) | |
NET: Registered protocol family 1 | |
RPC: Registered named UNIX socket transport module. | |
RPC: Registered udp transport module. | |
RPC: Registered tcp transport module. | |
RPC: Registered tcp NFSv4.1 backchannel transport module. | |
bcm2708_dma: DMA manager at ce808000 | |
bcm2708_gpio: bcm2708_gpio_probe c03a3d88 | |
vc-mem: Videocore memory driver | |
VFS: Disk quotas dquot_6.5.2 | |
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) | |
FS-Cache: Netfs 'nfs' registered for caching | |
msgmni has been set to 435 | |
io scheduler noop registered | |
io scheduler deadline registered | |
io scheduler cfq registered (default) | |
BCM2708FB: registering framebuffer (1504x1104@16) | |
bcm2708_fb_set_par info(cd888000) 1504x1104 (1504x1104), 0, 16 | |
BCM2708FB: start = cec00000,4f385000 width=1504, height=1104, bpp=16, pitch=3008 size=3321856 success=0 | |
Console: switching to colour frame buffer device 188x69 | |
BCM2708FB: register framebuffer (0) | |
brd: module loaded | |
loop: module loaded | |
vcos: [1]: vchiq_init_state: slot_zero = 0xffd80000, is_master = 0 | |
vcos: [1]: vchiq_init_state: called | |
vcos: [1]: vchiq: initialised - version 2 (min 2), device 253.0 | |
usbcore: registered new interface driver smsc95xx | |
cdc_ncm: 04-Aug-2011 | |
usbcore: registered new interface driver cdc_ncm | |
dwc_otg: version 2.90b 6-MAY-2010 (platform bus) | |
Core Release: 2.80a | |
Setting default values for core params | |
Finished setting default values for core params | |
ce840008 -> 1 | |
Using Buffer DMA mode | |
Periodic Transfer Interrupt Enhancement - disabled | |
Multiprocessor Interrupt Enhancement - disabled | |
Dedicated Tx FIFOs mode | |
dwc_otg bcm2708_usb: DWC OTG Controller | |
dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1 | |
dwc_otg bcm2708_usb: irq 75, io mem 0x00000000 | |
Init: Port Power? op_state=1 | |
Init: Power Port (0) | |
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 | |
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 | |
usb usb1: Product: DWC OTG Controller | |
usb usb1: Manufacturer: Linux 3.1.9+ dwc_otg_hcd | |
usb usb1: SerialNumber: bcm2708_usb | |
hub 1-0:1.0: USB hub found | |
hub 1-0:1.0: 1 port detected | |
Module dwc_common_port init | |
usbcore: registered new interface driver uas | |
Initializing USB Mass Storage driver... | |
usbcore: registered new interface driver usb-storage | |
USB Mass Storage support registered. | |
usbcore: registered new interface driver libusual | |
mousedev: PS/2 mouse device common for all mice | |
cpuidle: using governor ladder | |
cpuidle: using governor menu | |
sdhci: Secure Digital Host Controller Interface driver | |
sdhci: Copyright(c) Pierre Ossman | |
bcm_power_open() -> 1 | |
Registered led device: mmc0:: | |
mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA | |
mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77 | |
sdhci-pltfm: SDHCI platform and OF driver helper | |
Registered led device: led0 | |
usbcore: registered new interface driver usbhid | |
usbhid: USB HID core driver | |
TCP cubic registered | |
Initializing XFRM netlink socket | |
NET: Registered protocol family 17 | |
Registering the dns_resolver key type | |
VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 | |
Waiting for root device /dev/mmcblk0p2... | |
mmc0: new SD card at address 0002 | |
mmcblk0: mmc0:0002 00000 1.86 GiB | |
mmcblk0: p1 p2 p3 | |
usb 1-1: new high speed USB device number 2 using dwc_otg | |
usb 1-1: New USB device found, idVendor=0424, idProduct=9512 | |
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
hub 1-1:1.0: USB hub found | |
hub 1-1:1.0: 3 ports detected | |
usb 1-1.1: new high speed USB device number 3 using dwc_otg | |
usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 | |
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 | |
smsc95xx v1.0.4 | |
smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:66:0b:c2 | |
usb 1-1.2: new low speed USB device number 4 using dwc_otg | |
usb 1-1.2: New USB device found, idVendor=045e, idProduct=00b4 | |
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 | |
usb 1-1.2: Product: Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard | |
usb 1-1.2: Manufacturer: Microsoft | |
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0 | |
generic-usb 0003:045E:00B4.0001: input: USB HID v1.11 Keyboard [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-bcm2708_usb-1.2/input0 | |
input: Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1 | |
generic-usb 0003:045E:00B4.0002: input: USB HID v1.11 Device [Microsoft Microsoft\xffffffc2\xffffffae\xffffffae Digital Media Keyboard] on usb-bcm2708_usb-1.2/input1 | |
EXT4-fs (mmcblk0p2): recovery complete | |
EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) | |
VFS: Mounted root (ext4 filesystem) on device 179:2. | |
Freeing init memory: 116K | |
EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) | |
smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 | |
usb 1-1.3: new high speed USB device number 5 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: 802.11n WLAN Adapter | |
usb 1-1.3: Manufacturer: Realtek | |
usb 1-1.3: SerialNumber: 00e04c000001 | |
rtw driver version=v3.0.2164.20110715 | |
register rtw_netdev_ops to netdev_ops | |
CHIP TYPE: RTL8188C_8192C | |
usb_endpoint_descriptor(0): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=81 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_in = 1 | |
usb_endpoint_descriptor(1): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=2 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 2 | |
usb_endpoint_descriptor(2): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=3 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 3 | |
usb_endpoint_descriptor(3): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=84 | |
wMaxPacketSize=40 | |
bInterval=1 | |
RT_usb_endpoint_is_int_in = 4, Interval = 1 | |
nr_endpoint=4, in_num=2, out_num=2 | |
USB_SPEED_HIGH | |
Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. | |
RF_Type is 3!! | |
EEPROM type is E-FUSE | |
====> ReadAdapterInfo8192C | |
Boot from EFUSE, Autoload OK ! | |
EEPROMVID = 0x7392 | |
EEPROMPID = 0x7811 | |
EEPROMCustomerID : 0x00 | |
EEPROMSubCustomerID: 0x00 | |
RT_CustomerID: 0x00 | |
_ReadMACAddress MAC Address from EFUSE = 80:1f:02:5c:46:51 | |
EEPROMRegulatory = 0x0 | |
_ReadBoardType(0) | |
BT Coexistance = disable | |
RT_ChannelPlan: 0x00 | |
_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) | |
### PS params=> power_mgnt(0),usbss_enable(0) ### | |
### AntDivCfg(0) | |
readAdapterInfo_8192CU(): REPLACEMENT = 1 | |
<==== ReadAdapterInfo8192C in 270 ms | |
rtw_macaddr_cfg MAC Address = 80:1f:02:5c:46:51 | |
MAC Address from pnetdev->dev_addr= 80:1f:02:5c:46:51 | |
bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 | |
usbcore: registered new interface driver rtl8192cu | |
+871x_drv - drv_open, bup=0 | |
===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC | |
fw_ver=v75, fw_subver=0, sig=0x88c0 | |
fw download ok! | |
Set RF Chip ID to RF_6052 and RF type to 1T1R. | |
GPIO_IN=0c | |
eRfPowerStateToSet=0 | |
IQK:Start!!! | |
Path A IQK Success!! | |
Path A IQK Success!! | |
IQK: final_candidate is 0 | |
IQK: RegE94=103 RegE9C=13 RegEA4=ff RegEAC=3ff RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 | |
Path A IQ Calibration Success ! | |
pdmpriv->TxPowerTrackControl = 1 | |
MAC Address from REG_MACID = 80:1f:02:5c:46:51 | |
MAC Address = 80:1f:02:5c:46:51 | |
-871x_drv - drv_open, bup=1 | |
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH! | |
set_mode = IW_MODE_INFRA | |
=>rtw_wx_set_essid | |
ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a\xffffff80\xfffffff4\xffffffb8\xffffffcd\xffffff80\xffffff80\xfffffff4\xffffffb8\xffffffcd, len=32 | |
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH! | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0xe08, usb read fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
usb 1-1.3: USB disconnect, device number 5 | |
+rtw_dev_remove | |
(2)871x_drv - drv_close, bup=1, hw_init_completed=1 | |
-871x_drv - drv_close, bup=1 | |
reg 0xe08, usb write fail ,status:-71 value=0x2900 | |
###> rtw_cmd_thread break................. | |
reg 0x4c, usb read fail ,status:-19 value=0x0 | |
===> rtw_dev_unload | |
usb_read_port_cancel | |
usb_write_port_cancel | |
<=== rtw_dev_unload | |
+r871xu_dev_remove, hw_init_completed=1 | |
free_recv_skb_queue not empty, 4 | |
=====> rtl8192c_free_hal_data ===== | |
<===== rtl8192c_free_hal_data ===== | |
-r871xu_dev_remove, done | |
usb 1-1.3: new high speed USB device number 6 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: 802.11n WLAN Adapter | |
usb 1-1.3: Manufacturer: Realtek | |
usb 1-1.3: SerialNumber: 00e04c000001 | |
register rtw_netdev_ops to netdev_ops | |
CHIP TYPE: RTL8188C_8192C | |
usb_endpoint_descriptor(0): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=81 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_in = 1 | |
usb_endpoint_descriptor(1): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=2 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 2 | |
usb_endpoint_descriptor(2): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=3 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 3 | |
usb_endpoint_descriptor(3): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=84 | |
wMaxPacketSize=40 | |
bInterval=1 | |
RT_usb_endpoint_is_int_in = 4, Interval = 1 | |
nr_endpoint=4, in_num=2, out_num=2 | |
USB_SPEED_HIGH | |
Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. | |
RF_Type is 3!! | |
EEPROM type is E-FUSE | |
====> ReadAdapterInfo8192C | |
Boot from EFUSE, Autoload OK ! | |
EEPROMVID = 0x7392 | |
EEPROMPID = 0x7811 | |
EEPROMCustomerID : 0x00 | |
EEPROMSubCustomerID: 0x00 | |
RT_CustomerID: 0x00 | |
_ReadMACAddress MAC Address from EFUSE = 80:1f:02:5c:46:51 | |
EEPROMRegulatory = 0x0 | |
_ReadBoardType(0) | |
BT Coexistance = disable | |
RT_ChannelPlan: 0x00 | |
_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) | |
### PS params=> power_mgnt(0),usbss_enable(0) ### | |
### AntDivCfg(0) | |
readAdapterInfo_8192CU(): REPLACEMENT = 1 | |
<==== ReadAdapterInfo8192C in 300 ms | |
rtw_macaddr_cfg MAC Address = 80:1f:02:5c:46:51 | |
MAC Address from pnetdev->dev_addr= 80:1f:02:5c:46:51 | |
bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 | |
+871x_drv - drv_open, bup=0 | |
===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC | |
fw_ver=v75, fw_subver=0, sig=0x88c0 | |
fw download ok! | |
Set RF Chip ID to RF_6052 and RF type to 1T1R. | |
GPIO_IN=0c | |
eRfPowerStateToSet=0 | |
IQK:Start!!! | |
Path A IQK Success!! | |
Path A IQK Success!! | |
IQK: final_candidate is 0 | |
IQK: RegE94=104 RegE9C=13 RegEA4=ff RegEAC=3ff RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 | |
Path A IQ Calibration Success ! | |
pdmpriv->TxPowerTrackControl = 1 | |
MAC Address from REG_MACID = 80:1f:02:5c:46:51 | |
MAC Address = 80:1f:02:5c:46:51 | |
-871x_drv - drv_open fail, bup=0 | |
+871x_drv - drv_open, bup=0 | |
===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC | |
fw_ver=v75, fw_subver=0, sig=0x88c0 | |
rtl8192c_FirmwareSelfReset =====> 8051 reset success (100) . | |
reg 0x80, usb read fail ,status:-110 value=0x0 | |
fw download ok! | |
Set RF Chip ID to RF_6052 and RF type to 1T1R. | |
GPIO_IN=0c | |
eRfPowerStateToSet=0 | |
pdmpriv->TxPowerTrackControl = 1 | |
MAC Address from REG_MACID = 80:1f:02:5c:46:51 | |
MAC Address = 80:1f:02:5c:46:51 | |
-871x_drv - drv_open, bup=1 | |
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH! | |
set_mode = IW_MODE_INFRA | |
=>rtw_wx_set_essid | |
ssid=g\xffffffc6isQ\xffffffffJ\xffffffec)\xffffffcd\xffffffba\xffffffba\xffffffab\xfffffff2\xfffffffb\xffffffe3F|\xffffffc2T\xfffffff8\x1b\xffffffe8\xffffffe7\xffffff8dvZ.c3\xffffff9f\xffffffc9\xffffff9a\xffffff9a, len=32 | |
[rtw_wx_set_pmkid] IW_PMKSA_FLUSH! | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
###=> usb_read_port_complete => urb status(-71) | |
continual_urb_error > 4 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0xe08, usb read fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0xe08, usb write fail ,status:-71 value=0x2900 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x86c, usb read fail ,status:-71 value=0x0 | |
usb 1-1.3: USB disconnect, device number 6 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
+rtw_dev_remove | |
(2)871x_drv - drv_close, bup=1, hw_init_completed=1 | |
-871x_drv - drv_close, bup=1 | |
reg 0x86c, usb write fail ,status:-71 value=0x29292900 | |
###> rtw_cmd_thread break................. | |
reg 0x4c, usb read fail ,status:-19 value=0x0 | |
===> rtw_dev_unload | |
usb_read_port_cancel | |
usb_write_port_cancel | |
<=== rtw_dev_unload | |
+r871xu_dev_remove, hw_init_completed=1 | |
free_recv_skb_queue not empty, 4 | |
=====> rtl8192c_free_hal_data ===== | |
<===== rtl8192c_free_hal_data ===== | |
-r871xu_dev_remove, done | |
usb 1-1.3: new high speed USB device number 8 using dwc_otg | |
usb 1-1.3: New USB device found, idVendor=7392, idProduct=7811 | |
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 | |
usb 1-1.3: Product: 802.11n WLAN Adapter | |
usb 1-1.3: Manufacturer: Realtek | |
usb 1-1.3: SerialNumber: 00e04c000001 | |
register rtw_netdev_ops to netdev_ops | |
CHIP TYPE: RTL8188C_8192C | |
usb_endpoint_descriptor(0): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=81 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_in = 1 | |
usb_endpoint_descriptor(1): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=2 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 2 | |
usb_endpoint_descriptor(2): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=3 | |
wMaxPacketSize=200 | |
bInterval=0 | |
RT_usb_endpoint_is_bulk_out = 3 | |
usb_endpoint_descriptor(3): | |
bLength=7 | |
bDescriptorType=5 | |
bEndpointAddress=84 | |
wMaxPacketSize=40 | |
bInterval=1 | |
RT_usb_endpoint_is_int_in = 4, Interval = 1 | |
nr_endpoint=4, in_num=2, out_num=2 | |
USB_SPEED_HIGH | |
Chip Version ID: VERSION_NORMAL_TSMC_CHIP_88C. | |
RF_Type is 3!! | |
EEPROM type is E-FUSE | |
====> ReadAdapterInfo8192C | |
Boot from EFUSE, Autoload OK ! | |
EEPROMVID = 0x7392 | |
EEPROMPID = 0x7811 | |
EEPROMCustomerID : 0x00 | |
EEPROMSubCustomerID: 0x00 | |
RT_CustomerID: 0x00 | |
_ReadMACAddress MAC Address from EFUSE = 80:1f:02:5c:46:51 | |
EEPROMRegulatory = 0x0 | |
_ReadBoardType(0) | |
BT Coexistance = disable | |
RT_ChannelPlan: 0x00 | |
_ReadPSSetting...bHWPwrPindetect(0)-bHWPowerdown(0) ,bSupportRemoteWakeup(0) | |
### PS params=> power_mgnt(0),usbss_enable(0) ### | |
### AntDivCfg(0) | |
readAdapterInfo_8192CU(): REPLACEMENT = 1 | |
<==== ReadAdapterInfo8192C in 310 ms | |
rtw_macaddr_cfg MAC Address = 80:1f:02:5c:46:51 | |
MAC Address from pnetdev->dev_addr= 80:1f:02:5c:46:51 | |
bDriverStopped:1, bSurpriseRemoved:0, bup:0, hw_init_completed:0 | |
+871x_drv - drv_open, bup=0 | |
===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC | |
fw_ver=v75, fw_subver=0, sig=0x88c0 | |
fw download ok! | |
Set RF Chip ID to RF_6052 and RF type to 1T1R. | |
GPIO_IN=0c | |
eRfPowerStateToSet=0 | |
IQK:Start!!! | |
Path A IQK Success!! | |
Path A IQK Success!! | |
IQK: final_candidate is 0 | |
IQK: RegE94=104 RegE9C=13 RegEA4=fe RegEAC=3fe RegEB4=0 RegEBC=0 RegEC4=0 RegECC=0 | |
Path A IQ Calibration Success ! | |
pdmpriv->TxPowerTrackControl = 1 | |
MAC Address from REG_MACID = 80:1f:02:5c:46:51 | |
MAC Address = 80:1f:02:5c:46:51 | |
-871x_drv - drv_open fail, bup=0 | |
+871x_drv - drv_open, bup=0 | |
===> FirmwareDownload91C() fw:Rtl819XFwImageArray_TSMC | |
fw_ver=v75, fw_subver=0, sig=0x88c0 | |
rtl8192c_FirmwareSelfReset =====> 8051 reset success (100) . | |
reg 0x80, usb read fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x80, usb write fail ,status:-71 value=0x1 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x82, usb read fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x82, usb write fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x82, usb read fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x82, usb write fail ,status:-71 value=0x0 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
reg 0x1000, usb write fail ,status:-71 value=0xad4302 | |
usb 1-1.3: USB disconnect, device number 8 | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
DEBUG:handle_hc_chhltd_intr_dma:: XactErr without NYET/NAK/ACK | |
+rtw_dev_remove | |
reg 0x10c4, usb write fail ,status:-71 value=0x30001010 | |
chksum report faill ! REG_MCUFWDL:0x00000000 . | |
DL Firmware failed! | |
fw download fail! | |
-871x_drv - drv_open fail, bup=0 | |
<=== rtw_dev_unload | |
+r871xu_dev_remove, hw_init_completed=0 | |
free_recv_skb_queue not empty, 8 | |
=====> rtl8192c_free_hal_data ===== | |
<===== rtl8192c_free_hal_data ===== | |
-r871xu_dev_remove, done |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
I have the same problem, my wifi if rtl8723a,Could not connect with the AP.