Skip to content

Instantly share code, notes, and snippets.

@thomasfr
Last active November 18, 2024 03:37
Show Gist options
  • Save thomasfr/9707568 to your computer and use it in GitHub Desktop.
Save thomasfr/9707568 to your computer and use it in GitHub Desktop.
Systemd service for autossh
[Unit]
Description=Keeps a tunnel to 'remote.example.com' open
After=network.target
[Service]
User=autossh
# -p [PORT]
# -l [user]
# -M 0 --> no monitoring
# -N Just open the connection and do nothing (not interactive)
# LOCALPORT:IP_ON_EXAMPLE_COM:PORT_ON_EXAMPLE_COM
ExecStart=/usr/bin/autossh -M 0 -N -q -o "ServerAliveInterval 60" -o "ServerAliveCountMax 3" -p 22 -l autossh remote.example.com -L 7474:127.0.0.1:7474 -i /home/autossh/.ssh/id_rsa
[Install]
WantedBy=multi-user.target
@haelix888
Copy link

Some stuff is overkill, e.g.

  • you don't need the ExecStop, systemctl stop autossh will work just fine out of the box
  • you don't need the AUTOSSH_GATETIME setting

@ScumCoder
Copy link

ScumCoder commented Jul 12, 2022

Some stuff is overkill, e.g.

* you don't need the AUTOSSH_GATETIME setting

Of course you do, without it autossh will give up if the very first connection attempt fails.

You USED to not need it, because it was implied by the -f flag. Except that systemd does not support the -f flag.

@haelix888
Copy link

@ScumCoder this wasn't my experience of it, I never used AUTOSSH_GATETIME but I use autossh and it does retry. It's been a while since I looked at it though, so stuff may have changed.

@jotakar
Copy link

jotakar commented Dec 27, 2022

Hi, I have this service for tunnel with autossh

[Unit]
Description=Open my Tunnel
After=network.target

[Service]
ExecStart=autossh -M 12000 -N -f -o "PubkeyAuthentication=yes" -o "PasswordAuthentication=no" -o ServerAliveInterval=60 -o ServerAliveCountMax=3 -i /home/usrtunel/.ssh/clavetunel -R 7090:localhost:7080 usrremote@100.xxx.xxx.xxx -p YYY
WorkingDirectory=/opt/run
RestartSec=5
Restart=always

[Install]
WantedBy=multi-user.target

If I run the autossh by hand, in command line, the tunnel remains open and working fine.
But with the service I found that every a while the service restart
My log shows this:

Dec 27 19:26:51 myserver autossh[24726]: starting ssh (count 1)
Dec 27 19:26:51 myserver autossh[24726]: ssh child pid is 24727
Dec 27 19:26:51 myserver autossh[24726]: received signal to exit (15)
Dec 27 19:26:57 myserver autossh[24732]: starting ssh (count 1)
Dec 27 19:26:57 myserver autossh[24732]: ssh child pid is 24733
Dec 27 19:26:57 myserver autossh[24732]: signalled to exit
Dec 27 19:28:32 myserver autossh[24897]: starting ssh (count 1)
Dec 27 19:28:32 myserver autossh[24897]: ssh child pid is 24898
Dec 27 19:28:32 myserver autossh[24897]: signalled to exit
Dec 27 19:30:08 myserver autossh[25106]: starting ssh (count 1)
Dec 27 19:30:08 myserver autossh[25106]: ssh child pid is 25107
Dec 27 19:30:08 myserver autossh[25106]: signalled to exit
Dec 27 19:31:43 myserver autossh[25278]: starting ssh (count 1)
Dec 27 19:31:43 myserver autossh[25278]: ssh child pid is 25279
Dec 27 19:31:43 myserver autossh[25278]: signalled to exit

What I see is that service stop autossh every few minutes, why? where is the error?

@Iiridayn
Copy link

@jotakar I've been using:

[Unit]
Description=Keep open a reverse tunnel to my computer via the DMZ server
After=network.target

[Service]
ExecStart=/usr/bin/ssh -NT tunnel
RestartSec=5
Restart=always

[Install]
WantedBy=multi-user.target

With tunnel defined in /root/.ssh/config as

Host                    tunnel
HostName                <redacted>
User                    <redacted>
IdentityFile    ~/.ssh/id_tunnel
ProxyCommand    ssh bastion -W %h:%p
RemoteForward   <redacted port> localhost:22
ExitOnForwardFailure yes
ServerAliveCountMax 5

And the bastion host also defined in the same file as

Host           bastion
HostName       <redacted>
User           <redacted>
IdentityFile   ~/.ssh/id_tunnel
ForwardAgent yes

I also have

Host *
ServerAliveInterval 60
IdentitiesOnly yes

at the top of my /root/.ssh/config, on the off-chance that's relevant.

I've found this to be very consistent and stable, and easy to test (ssh bastion, ssh -NT tunnel) when setting it up. Perhaps removing autossh and setting it up this way might help?

@mikkorantalainen
Copy link

mikkorantalainen commented Mar 22, 2023

For completeness, you should also add:

ExecStop=kill -9 autossh

Without it systemctl stop autossh won't do anything.

I think it would be better idea to add

KillMode=control-group

to the .service file because that will kill everything that was started (recursively) and nothing more. In addition, it will first send SIGTERM and use SIGKILL only if the process will not stop nicely.

If you randomly kill one or all autossh processes in the system, you might kill more than expected if autossh is used for other stuff, too.

See https://www.freedesktop.org/software/systemd/man/systemd.kill.html#KillMode= for details

@MestreLion
Copy link

MestreLion commented Jun 16, 2023

@jotakar :

What I see is that service stop autossh every few minutes, why? where is the error?

Don't use -f when using autossh as a systemd simple service. It will fork autossh (put in the background) and confuse systemd into thinking it ended.

@ScumCoder

Of course you do, without it autossh will give up if the very first connection attempt fails.

Systemd's Restart=always and RestartSec=60 can take care of that. You usually want autossh to fail fast if it can't do the first connection, as it usually means misconfiguration or authentication issues, and giving up after first attempt helps highlighting that on the journalctl logs.

@stokito
Copy link

stokito commented Jul 4, 2023

JFYI: I created an SSH tunnel SystemD service that works without the autossh github.com/yurt-page/sshtunnel

@zhangw
Copy link

zhangw commented Dec 31, 2023

@jotakar :

What I see is that service stop autossh every few minutes, why? where is the error?

Don't use -f when using autossh as a systemd simple service. It will fork autossh (put in the background) and confuse systemd into thinking it ended.

@ScumCoder

Of course you do, without it autossh will give up if the very first connection attempt fails.

Systemd's Restart=always and RestartSec=60 can take care of that. You usually want autossh to fail fast if it can't do the first connection, as it usually means misconfiguration or authentication issues, and giving up after first attempt helps highlighting that on the journalctl logs.

Yes, I just remove the '-f' option, it seems fine.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment