Last active
March 28, 2024 16:08
-
-
Save tjjfvi/75210b2ed20ed194d6eab48bf70c4f12 to your computer and use it in GitHub Desktop.
Use https://csi.t6.fyi/ for the most up-to-date version; source: https://github.com/tjjfvi/CuraSettingsInjector.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| ; acceleration_enabled = {acceleration_enabled} | |
| ; acceleration_infill = {acceleration_infill} | |
| ; acceleration_ironing = {acceleration_ironing} | |
| ; acceleration_layer_0 = {acceleration_layer_0} | |
| ; acceleration_prime_tower = {acceleration_prime_tower} | |
| ; acceleration_print = {acceleration_print} | |
| ; acceleration_print_layer_0 = {acceleration_print_layer_0} | |
| ; acceleration_roofing = {acceleration_roofing} | |
| ; acceleration_skirt_brim = {acceleration_skirt_brim} | |
| ; acceleration_support = {acceleration_support} | |
| ; acceleration_support_bottom = {acceleration_support_bottom} | |
| ; acceleration_support_infill = {acceleration_support_infill} | |
| ; acceleration_support_interface = {acceleration_support_interface} | |
| ; acceleration_support_roof = {acceleration_support_roof} | |
| ; acceleration_topbottom = {acceleration_topbottom} | |
| ; acceleration_travel = {acceleration_travel} | |
| ; acceleration_travel_layer_0 = {acceleration_travel_layer_0} | |
| ; acceleration_wall = {acceleration_wall} | |
| ; acceleration_wall_0 = {acceleration_wall_0} | |
| ; acceleration_wall_x = {acceleration_wall_x} | |
| ; adaptive_layer_height_enabled = {adaptive_layer_height_enabled} | |
| ; adaptive_layer_height_threshold = {adaptive_layer_height_threshold} | |
| ; adaptive_layer_height_variation = {adaptive_layer_height_variation} | |
| ; adaptive_layer_height_variation_step = {adaptive_layer_height_variation_step} | |
| ; adhesion_extruder_nr = {adhesion_extruder_nr} | |
| ; adhesion_type = {adhesion_type} | |
| ; alternate_carve_order = {alternate_carve_order} | |
| ; alternate_extra_perimeter = {alternate_extra_perimeter} | |
| ; anti_overhang_mesh = {anti_overhang_mesh} | |
| ; bottom_layers = {bottom_layers} | |
| ; bottom_skin_expand_distance = {bottom_skin_expand_distance} | |
| ; bottom_skin_preshrink = {bottom_skin_preshrink} | |
| ; bottom_thickness = {bottom_thickness} | |
| ; bridge_enable_more_layers = {bridge_enable_more_layers} | |
| ; bridge_fan_speed = {bridge_fan_speed} | |
| ; bridge_fan_speed_2 = {bridge_fan_speed_2} | |
| ; bridge_fan_speed_3 = {bridge_fan_speed_3} | |
| ; bridge_settings_enabled = {bridge_settings_enabled} | |
| ; bridge_skin_density = {bridge_skin_density} | |
| ; bridge_skin_density_2 = {bridge_skin_density_2} | |
| ; bridge_skin_density_3 = {bridge_skin_density_3} | |
| ; bridge_skin_material_flow = {bridge_skin_material_flow} | |
| ; bridge_skin_material_flow_2 = {bridge_skin_material_flow_2} | |
| ; bridge_skin_material_flow_3 = {bridge_skin_material_flow_3} | |
| ; bridge_skin_speed = {bridge_skin_speed} | |
| ; bridge_skin_speed_2 = {bridge_skin_speed_2} | |
| ; bridge_skin_speed_3 = {bridge_skin_speed_3} | |
| ; bridge_skin_support_threshold = {bridge_skin_support_threshold} | |
| ; bridge_sparse_infill_max_density = {bridge_sparse_infill_max_density} | |
| ; bridge_wall_coast = {bridge_wall_coast} | |
| ; bridge_wall_material_flow = {bridge_wall_material_flow} | |
| ; bridge_wall_min_length = {bridge_wall_min_length} | |
| ; bridge_wall_speed = {bridge_wall_speed} | |
| ; brim_gap = {brim_gap} | |
| ; brim_line_count = {brim_line_count} | |
| ; brim_outside_only = {brim_outside_only} | |
| ; brim_replaces_support = {brim_replaces_support} | |
| ; brim_width = {brim_width} | |
| ; build_volume_temperature = {build_volume_temperature} | |
| ; carve_multiple_volumes = {carve_multiple_volumes} | |
| ; center_object = {center_object} | |
| ; clean_between_layers = {clean_between_layers} | |
| ; coasting_enable = {coasting_enable} | |
| ; coasting_min_volume = {coasting_min_volume} | |
| ; coasting_speed = {coasting_speed} | |
| ; coasting_volume = {coasting_volume} | |
| ; conical_overhang_angle = {conical_overhang_angle} | |
| ; conical_overhang_enabled = {conical_overhang_enabled} | |
| ; conical_overhang_hole_size = {conical_overhang_hole_size} | |
| ; connect_infill_polygons = {connect_infill_polygons} | |
| ; connect_skin_polygons = {connect_skin_polygons} | |
| ; cool_fan_enabled = {cool_fan_enabled} | |
| ; cool_fan_full_at_height = {cool_fan_full_at_height} | |
| ; cool_fan_full_layer = {cool_fan_full_layer} | |
| ; cool_fan_speed = {cool_fan_speed} | |
| ; cool_fan_speed_0 = {cool_fan_speed_0} | |
| ; cool_fan_speed_max = {cool_fan_speed_max} | |
| ; cool_fan_speed_min = {cool_fan_speed_min} | |
| ; cool_lift_head = {cool_lift_head} | |
| ; cool_min_layer_time = {cool_min_layer_time} | |
| ; cool_min_layer_time_fan_speed_max = {cool_min_layer_time_fan_speed_max} | |
| ; cool_min_speed = {cool_min_speed} | |
| ; cross_infill_density_image = {cross_infill_density_image} | |
| ; cross_infill_pocket_size = {cross_infill_pocket_size} | |
| ; cross_support_density_image = {cross_support_density_image} | |
| ; cutting_mesh = {cutting_mesh} | |
| ; default_material_bed_temperature = {default_material_bed_temperature} | |
| ; default_material_print_temperature = {default_material_print_temperature} | |
| ; draft_shield_dist = {draft_shield_dist} | |
| ; draft_shield_enabled = {draft_shield_enabled} | |
| ; draft_shield_height = {draft_shield_height} | |
| ; draft_shield_height_limitation = {draft_shield_height_limitation} | |
| ; expand_skins_expand_distance = {expand_skins_expand_distance} | |
| ; extruder_prime_pos_abs = {extruder_prime_pos_abs} | |
| ; extruder_prime_pos_x = {extruder_prime_pos_x} | |
| ; extruder_prime_pos_y = {extruder_prime_pos_y} | |
| ; extruder_prime_pos_z = {extruder_prime_pos_z} | |
| ; extruders_enabled_count = {extruders_enabled_count} | |
| ; fill_outline_gaps = {fill_outline_gaps} | |
| ; flow_rate_extrusion_offset_factor = {flow_rate_extrusion_offset_factor} | |
| ; flow_rate_max_extrusion_offset = {flow_rate_max_extrusion_offset} | |
| ; gantry_height = {gantry_height} | |
| ; gradual_infill_step_height = {gradual_infill_step_height} | |
| ; gradual_infill_steps = {gradual_infill_steps} | |
| ; gradual_support_infill_step_height = {gradual_support_infill_step_height} | |
| ; gradual_support_infill_steps = {gradual_support_infill_steps} | |
| ; hole_xy_offset = {hole_xy_offset} | |
| ; infill_angles = {infill_angles} | |
| ; infill_before_walls = {infill_before_walls} | |
| ; infill_enable_travel_optimization = {infill_enable_travel_optimization} | |
| ; infill_extruder_nr = {infill_extruder_nr} | |
| ; infill_line_distance = {infill_line_distance} | |
| ; infill_line_width = {infill_line_width} | |
| ; infill_material_flow = {infill_material_flow} | |
| ; infill_mesh = {infill_mesh} | |
| ; infill_mesh_order = {infill_mesh_order} | |
| ; infill_multiplier = {infill_multiplier} | |
| ; infill_offset_x = {infill_offset_x} | |
| ; infill_offset_y = {infill_offset_y} | |
| ; infill_overlap = {infill_overlap} | |
| ; infill_overlap_mm = {infill_overlap_mm} | |
| ; infill_pattern = {infill_pattern} | |
| ; infill_randomize_start_location = {infill_randomize_start_location} | |
| ; infill_sparse_density = {infill_sparse_density} | |
| ; infill_sparse_thickness = {infill_sparse_thickness} | |
| ; infill_support_angle = {infill_support_angle} | |
| ; infill_support_enabled = {infill_support_enabled} | |
| ; infill_wall_line_count = {infill_wall_line_count} | |
| ; infill_wipe_dist = {infill_wipe_dist} | |
| ; initial_bottom_layers = {initial_bottom_layers} | |
| ; initial_layer_line_width_factor = {initial_layer_line_width_factor} | |
| ; inset_direction = {inset_direction} | |
| ; ironing_enabled = {ironing_enabled} | |
| ; ironing_flow = {ironing_flow} | |
| ; ironing_inset = {ironing_inset} | |
| ; ironing_line_spacing = {ironing_line_spacing} | |
| ; ironing_monotonic = {ironing_monotonic} | |
| ; ironing_only_highest_layer = {ironing_only_highest_layer} | |
| ; ironing_pattern = {ironing_pattern} | |
| ; jerk_enabled = {jerk_enabled} | |
| ; jerk_infill = {jerk_infill} | |
| ; jerk_ironing = {jerk_ironing} | |
| ; jerk_layer_0 = {jerk_layer_0} | |
| ; jerk_prime_tower = {jerk_prime_tower} | |
| ; jerk_print = {jerk_print} | |
| ; jerk_print_layer_0 = {jerk_print_layer_0} | |
| ; jerk_roofing = {jerk_roofing} | |
| ; jerk_skirt_brim = {jerk_skirt_brim} | |
| ; jerk_support = {jerk_support} | |
| ; jerk_support_bottom = {jerk_support_bottom} | |
| ; jerk_support_infill = {jerk_support_infill} | |
| ; jerk_support_interface = {jerk_support_interface} | |
| ; jerk_support_roof = {jerk_support_roof} | |
| ; jerk_topbottom = {jerk_topbottom} | |
| ; jerk_travel = {jerk_travel} | |
| ; jerk_travel_layer_0 = {jerk_travel_layer_0} | |
| ; jerk_wall = {jerk_wall} | |
| ; jerk_wall_0 = {jerk_wall_0} | |
| ; jerk_wall_x = {jerk_wall_x} | |
| ; layer_0_z_overlap = {layer_0_z_overlap} | |
| ; layer_height = {layer_height} | |
| ; layer_height_0 = {layer_height_0} | |
| ; layer_start_x = {layer_start_x} | |
| ; layer_start_y = {layer_start_y} | |
| ; lightning_infill_overhang_angle = {lightning_infill_overhang_angle} | |
| ; lightning_infill_prune_angle = {lightning_infill_prune_angle} | |
| ; lightning_infill_straightening_angle = {lightning_infill_straightening_angle} | |
| ; lightning_infill_support_angle = {lightning_infill_support_angle} | |
| ; limit_support_retractions = {limit_support_retractions} | |
| ; line_width = {line_width} | |
| ; machine_acceleration = {machine_acceleration} | |
| ; machine_always_write_active_tool = {machine_always_write_active_tool} | |
| ; machine_buildplate_type = {machine_buildplate_type} | |
| ; machine_center_is_zero = {machine_center_is_zero} | |
| ; machine_depth = {machine_depth} | |
| ; machine_disallowed_areas = {machine_disallowed_areas} | |
| ; machine_endstop_positive_direction_x = {machine_endstop_positive_direction_x} | |
| ; machine_endstop_positive_direction_y = {machine_endstop_positive_direction_y} | |
| ; machine_endstop_positive_direction_z = {machine_endstop_positive_direction_z} | |
| ; machine_extruder_count = {machine_extruder_count} | |
| ; machine_extruders_share_heater = {machine_extruders_share_heater} | |
| ; machine_extruders_share_nozzle = {machine_extruders_share_nozzle} | |
| ; machine_extruders_shared_nozzle_initial_retraction = {machine_extruders_shared_nozzle_initial_retraction} | |
| ; machine_feeder_wheel_diameter = {machine_feeder_wheel_diameter} | |
| ; machine_firmware_retract = {machine_firmware_retract} | |
| ; machine_gcode_flavor = {machine_gcode_flavor} | |
| ; machine_head_with_fans_polygon = {machine_head_with_fans_polygon} | |
| ; machine_heat_zone_length = {machine_heat_zone_length} | |
| ; machine_heated_bed = {machine_heated_bed} | |
| ; machine_heated_build_volume = {machine_heated_build_volume} | |
| ; machine_height = {machine_height} | |
| ; machine_max_acceleration_e = {machine_max_acceleration_e} | |
| ; machine_max_acceleration_x = {machine_max_acceleration_x} | |
| ; machine_max_acceleration_y = {machine_max_acceleration_y} | |
| ; machine_max_acceleration_z = {machine_max_acceleration_z} | |
| ; machine_max_feedrate_e = {machine_max_feedrate_e} | |
| ; machine_max_feedrate_x = {machine_max_feedrate_x} | |
| ; machine_max_feedrate_y = {machine_max_feedrate_y} | |
| ; machine_max_feedrate_z = {machine_max_feedrate_z} | |
| ; machine_max_jerk_e = {machine_max_jerk_e} | |
| ; machine_max_jerk_xy = {machine_max_jerk_xy} | |
| ; machine_max_jerk_z = {machine_max_jerk_z} | |
| ; machine_min_cool_heat_time_window = {machine_min_cool_heat_time_window} | |
| ; machine_minimum_feedrate = {machine_minimum_feedrate} | |
| ; machine_name = {machine_name} | |
| ; machine_nozzle_cool_down_speed = {machine_nozzle_cool_down_speed} | |
| ; machine_nozzle_expansion_angle = {machine_nozzle_expansion_angle} | |
| ; machine_nozzle_head_distance = {machine_nozzle_head_distance} | |
| ; machine_nozzle_heat_up_speed = {machine_nozzle_heat_up_speed} | |
| ; machine_nozzle_id = {machine_nozzle_id} | |
| ; machine_nozzle_size = {machine_nozzle_size} | |
| ; machine_nozzle_temp_enabled = {machine_nozzle_temp_enabled} | |
| ; machine_nozzle_tip_outer_diameter = {machine_nozzle_tip_outer_diameter} | |
| ; machine_scale_fan_speed_zero_to_one = {machine_scale_fan_speed_zero_to_one} | |
| ; machine_shape = {machine_shape} | |
| ; machine_show_variants = {machine_show_variants} | |
| ; machine_steps_per_mm_e = {machine_steps_per_mm_e} | |
| ; machine_steps_per_mm_x = {machine_steps_per_mm_x} | |
| ; machine_steps_per_mm_y = {machine_steps_per_mm_y} | |
| ; machine_steps_per_mm_z = {machine_steps_per_mm_z} | |
| ; machine_use_extruder_offset_to_offset_coords = {machine_use_extruder_offset_to_offset_coords} | |
| ; machine_width = {machine_width} | |
| ; magic_fuzzy_skin_enabled = {magic_fuzzy_skin_enabled} | |
| ; magic_fuzzy_skin_outside_only = {magic_fuzzy_skin_outside_only} | |
| ; magic_fuzzy_skin_point_density = {magic_fuzzy_skin_point_density} | |
| ; magic_fuzzy_skin_point_dist = {magic_fuzzy_skin_point_dist} | |
| ; magic_fuzzy_skin_thickness = {magic_fuzzy_skin_thickness} | |
| ; magic_mesh_surface_mode = {magic_mesh_surface_mode} | |
| ; magic_spiralize = {magic_spiralize} | |
| ; material_adhesion_tendency = {material_adhesion_tendency} | |
| ; material_alternate_walls = {material_alternate_walls} | |
| ; material_anti_ooze_retracted_position = {material_anti_ooze_retracted_position} | |
| ; material_anti_ooze_retraction_speed = {material_anti_ooze_retraction_speed} | |
| ; material_bed_temp_prepend = {material_bed_temp_prepend} | |
| ; material_bed_temp_wait = {material_bed_temp_wait} | |
| ; material_bed_temperature = {material_bed_temperature} | |
| ; material_bed_temperature_layer_0 = {material_bed_temperature_layer_0} | |
| ; material_break_preparation_retracted_position = {material_break_preparation_retracted_position} | |
| ; material_break_preparation_speed = {material_break_preparation_speed} | |
| ; material_break_preparation_temperature = {material_break_preparation_temperature} | |
| ; material_break_retracted_position = {material_break_retracted_position} | |
| ; material_break_speed = {material_break_speed} | |
| ; material_break_temperature = {material_break_temperature} | |
| ; material_crystallinity = {material_crystallinity} | |
| ; material_diameter = {material_diameter} | |
| ; material_end_of_filament_purge_length = {material_end_of_filament_purge_length} | |
| ; material_end_of_filament_purge_speed = {material_end_of_filament_purge_speed} | |
| ; material_extrusion_cool_down_speed = {material_extrusion_cool_down_speed} | |
| ; material_final_print_temperature = {material_final_print_temperature} | |
| ; material_flow = {material_flow} | |
| ; material_flow_dependent_temperature = {material_flow_dependent_temperature} | |
| ; material_flow_layer_0 = {material_flow_layer_0} | |
| ; material_flow_temp_graph = {material_flow_temp_graph} | |
| ; material_flush_purge_length = {material_flush_purge_length} | |
| ; material_flush_purge_speed = {material_flush_purge_speed} | |
| ; material_guid = {material_guid} | |
| ; material_initial_print_temperature = {material_initial_print_temperature} | |
| ; material_maximum_park_duration = {material_maximum_park_duration} | |
| ; material_no_load_move_factor = {material_no_load_move_factor} | |
| ; material_print_temp_prepend = {material_print_temp_prepend} | |
| ; material_print_temp_wait = {material_print_temp_wait} | |
| ; material_print_temperature = {material_print_temperature} | |
| ; material_print_temperature_layer_0 = {material_print_temperature_layer_0} | |
| ; material_shrinkage_percentage = {material_shrinkage_percentage} | |
| ; material_shrinkage_percentage_xy = {material_shrinkage_percentage_xy} | |
| ; material_shrinkage_percentage_z = {material_shrinkage_percentage_z} | |
| ; material_standby_temperature = {material_standby_temperature} | |
| ; material_surface_energy = {material_surface_energy} | |
| ; max_extrusion_before_wipe = {max_extrusion_before_wipe} | |
| ; max_skin_angle_for_expansion = {max_skin_angle_for_expansion} | |
| ; mesh_position_x = {mesh_position_x} | |
| ; mesh_position_y = {mesh_position_y} | |
| ; mesh_position_z = {mesh_position_z} | |
| ; mesh_rotation_matrix = {mesh_rotation_matrix} | |
| ; meshfix_extensive_stitching = {meshfix_extensive_stitching} | |
| ; meshfix_keep_open_polygons = {meshfix_keep_open_polygons} | |
| ; meshfix_maximum_deviation = {meshfix_maximum_deviation} | |
| ; meshfix_maximum_extrusion_area_deviation = {meshfix_maximum_extrusion_area_deviation} | |
| ; meshfix_maximum_resolution = {meshfix_maximum_resolution} | |
| ; meshfix_maximum_travel_resolution = {meshfix_maximum_travel_resolution} | |
| ; meshfix_union_all = {meshfix_union_all} | |
| ; meshfix_union_all_remove_holes = {meshfix_union_all_remove_holes} | |
| ; min_bead_width = {min_bead_width} | |
| ; min_even_wall_line_width = {min_even_wall_line_width} | |
| ; min_feature_size = {min_feature_size} | |
| ; min_infill_area = {min_infill_area} | |
| ; min_odd_wall_line_width = {min_odd_wall_line_width} | |
| ; min_skin_width_for_expansion = {min_skin_width_for_expansion} | |
| ; min_wall_line_width = {min_wall_line_width} | |
| ; minimum_bottom_area = {minimum_bottom_area} | |
| ; minimum_interface_area = {minimum_interface_area} | |
| ; minimum_polygon_circumference = {minimum_polygon_circumference} | |
| ; minimum_roof_area = {minimum_roof_area} | |
| ; minimum_support_area = {minimum_support_area} | |
| ; mold_angle = {mold_angle} | |
| ; mold_enabled = {mold_enabled} | |
| ; mold_roof_height = {mold_roof_height} | |
| ; mold_width = {mold_width} | |
| ; multiple_mesh_overlap = {multiple_mesh_overlap} | |
| ; nozzle_disallowed_areas = {nozzle_disallowed_areas} | |
| ; ooze_shield_angle = {ooze_shield_angle} | |
| ; ooze_shield_dist = {ooze_shield_dist} | |
| ; ooze_shield_enabled = {ooze_shield_enabled} | |
| ; optimize_wall_printing_order = {optimize_wall_printing_order} | |
| ; prime_blob_enable = {prime_blob_enable} | |
| ; prime_tower_brim_enable = {prime_tower_brim_enable} | |
| ; prime_tower_enable = {prime_tower_enable} | |
| ; prime_tower_flow = {prime_tower_flow} | |
| ; prime_tower_line_width = {prime_tower_line_width} | |
| ; prime_tower_min_volume = {prime_tower_min_volume} | |
| ; prime_tower_position_x = {prime_tower_position_x} | |
| ; prime_tower_position_y = {prime_tower_position_y} | |
| ; prime_tower_size = {prime_tower_size} | |
| ; prime_tower_wipe_enabled = {prime_tower_wipe_enabled} | |
| ; print_sequence = {print_sequence} | |
| ; raft_acceleration = {raft_acceleration} | |
| ; raft_airgap = {raft_airgap} | |
| ; raft_base_acceleration = {raft_base_acceleration} | |
| ; raft_base_extruder_nr = {raft_base_extruder_nr} | |
| ; raft_base_fan_speed = {raft_base_fan_speed} | |
| ; raft_base_jerk = {raft_base_jerk} | |
| ; raft_base_line_spacing = {raft_base_line_spacing} | |
| ; raft_base_line_width = {raft_base_line_width} | |
| ; raft_base_speed = {raft_base_speed} | |
| ; raft_base_thickness = {raft_base_thickness} | |
| ; raft_base_wall_count = {raft_base_wall_count} | |
| ; raft_fan_speed = {raft_fan_speed} | |
| ; raft_interface_acceleration = {raft_interface_acceleration} | |
| ; raft_interface_extruder_nr = {raft_interface_extruder_nr} | |
| ; raft_interface_fan_speed = {raft_interface_fan_speed} | |
| ; raft_interface_jerk = {raft_interface_jerk} | |
| ; raft_interface_layers = {raft_interface_layers} | |
| ; raft_interface_line_spacing = {raft_interface_line_spacing} | |
| ; raft_interface_line_width = {raft_interface_line_width} | |
| ; raft_interface_speed = {raft_interface_speed} | |
| ; raft_interface_thickness = {raft_interface_thickness} | |
| ; raft_jerk = {raft_jerk} | |
| ; raft_margin = {raft_margin} | |
| ; raft_remove_inside_corners = {raft_remove_inside_corners} | |
| ; raft_smoothing = {raft_smoothing} | |
| ; raft_speed = {raft_speed} | |
| ; raft_surface_acceleration = {raft_surface_acceleration} | |
| ; raft_surface_extruder_nr = {raft_surface_extruder_nr} | |
| ; raft_surface_fan_speed = {raft_surface_fan_speed} | |
| ; raft_surface_jerk = {raft_surface_jerk} | |
| ; raft_surface_layers = {raft_surface_layers} | |
| ; raft_surface_line_spacing = {raft_surface_line_spacing} | |
| ; raft_surface_line_width = {raft_surface_line_width} | |
| ; raft_surface_speed = {raft_surface_speed} | |
| ; raft_surface_thickness = {raft_surface_thickness} | |
| ; relative_extrusion = {relative_extrusion} | |
| ; remove_empty_first_layers = {remove_empty_first_layers} | |
| ; retract_at_layer_change = {retract_at_layer_change} | |
| ; retraction_amount = {retraction_amount} | |
| ; retraction_combing = {retraction_combing} | |
| ; retraction_combing_max_distance = {retraction_combing_max_distance} | |
| ; retraction_count_max = {retraction_count_max} | |
| ; retraction_enable = {retraction_enable} | |
| ; retraction_extra_prime_amount = {retraction_extra_prime_amount} | |
| ; retraction_extrusion_window = {retraction_extrusion_window} | |
| ; retraction_hop = {retraction_hop} | |
| ; retraction_hop_after_extruder_switch = {retraction_hop_after_extruder_switch} | |
| ; retraction_hop_after_extruder_switch_height = {retraction_hop_after_extruder_switch_height} | |
| ; retraction_hop_enabled = {retraction_hop_enabled} | |
| ; retraction_hop_only_when_collides = {retraction_hop_only_when_collides} | |
| ; retraction_min_travel = {retraction_min_travel} | |
| ; retraction_prime_speed = {retraction_prime_speed} | |
| ; retraction_retract_speed = {retraction_retract_speed} | |
| ; retraction_speed = {retraction_speed} | |
| ; roofing_angles = {roofing_angles} | |
| ; roofing_extruder_nr = {roofing_extruder_nr} | |
| ; roofing_layer_count = {roofing_layer_count} | |
| ; roofing_line_width = {roofing_line_width} | |
| ; roofing_material_flow = {roofing_material_flow} | |
| ; roofing_monotonic = {roofing_monotonic} | |
| ; roofing_pattern = {roofing_pattern} | |
| ; skin_angles = {skin_angles} | |
| ; skin_edge_support_layers = {skin_edge_support_layers} | |
| ; skin_edge_support_thickness = {skin_edge_support_thickness} | |
| ; skin_line_width = {skin_line_width} | |
| ; skin_material_flow = {skin_material_flow} | |
| ; skin_monotonic = {skin_monotonic} | |
| ; skin_no_small_gaps_heuristic = {skin_no_small_gaps_heuristic} | |
| ; skin_outline_count = {skin_outline_count} | |
| ; skin_overlap = {skin_overlap} | |
| ; skin_overlap_mm = {skin_overlap_mm} | |
| ; skin_preshrink = {skin_preshrink} | |
| ; skirt_brim_extruder_nr = {skirt_brim_extruder_nr} | |
| ; skirt_brim_line_width = {skirt_brim_line_width} | |
| ; skirt_brim_material_flow = {skirt_brim_material_flow} | |
| ; skirt_brim_minimal_length = {skirt_brim_minimal_length} | |
| ; skirt_brim_speed = {skirt_brim_speed} | |
| ; skirt_gap = {skirt_gap} | |
| ; skirt_line_count = {skirt_line_count} | |
| ; slicing_tolerance = {slicing_tolerance} | |
| ; small_feature_max_length = {small_feature_max_length} | |
| ; small_feature_speed_factor = {small_feature_speed_factor} | |
| ; small_feature_speed_factor_0 = {small_feature_speed_factor_0} | |
| ; small_hole_max_size = {small_hole_max_size} | |
| ; smooth_spiralized_contours = {smooth_spiralized_contours} | |
| ; speed_equalize_flow_width_factor = {speed_equalize_flow_width_factor} | |
| ; speed_infill = {speed_infill} | |
| ; speed_ironing = {speed_ironing} | |
| ; speed_layer_0 = {speed_layer_0} | |
| ; speed_prime_tower = {speed_prime_tower} | |
| ; speed_print = {speed_print} | |
| ; speed_print_layer_0 = {speed_print_layer_0} | |
| ; speed_roofing = {speed_roofing} | |
| ; speed_slowdown_layers = {speed_slowdown_layers} | |
| ; speed_support = {speed_support} | |
| ; speed_support_bottom = {speed_support_bottom} | |
| ; speed_support_infill = {speed_support_infill} | |
| ; speed_support_interface = {speed_support_interface} | |
| ; speed_support_roof = {speed_support_roof} | |
| ; speed_topbottom = {speed_topbottom} | |
| ; speed_travel = {speed_travel} | |
| ; speed_travel_layer_0 = {speed_travel_layer_0} | |
| ; speed_wall = {speed_wall} | |
| ; speed_wall_0 = {speed_wall_0} | |
| ; speed_wall_x = {speed_wall_x} | |
| ; speed_z_hop = {speed_z_hop} | |
| ; sub_div_rad_add = {sub_div_rad_add} | |
| ; support_angle = {support_angle} | |
| ; support_bottom_angles = {support_bottom_angles} | |
| ; support_bottom_density = {support_bottom_density} | |
| ; support_bottom_distance = {support_bottom_distance} | |
| ; support_bottom_enable = {support_bottom_enable} | |
| ; support_bottom_extruder_nr = {support_bottom_extruder_nr} | |
| ; support_bottom_height = {support_bottom_height} | |
| ; support_bottom_line_distance = {support_bottom_line_distance} | |
| ; support_bottom_line_width = {support_bottom_line_width} | |
| ; support_bottom_material_flow = {support_bottom_material_flow} | |
| ; support_bottom_offset = {support_bottom_offset} | |
| ; support_bottom_pattern = {support_bottom_pattern} | |
| ; support_bottom_stair_step_height = {support_bottom_stair_step_height} | |
| ; support_bottom_stair_step_min_slope = {support_bottom_stair_step_min_slope} | |
| ; support_bottom_stair_step_width = {support_bottom_stair_step_width} | |
| ; support_brim_enable = {support_brim_enable} | |
| ; support_brim_line_count = {support_brim_line_count} | |
| ; support_brim_width = {support_brim_width} | |
| ; support_conical_angle = {support_conical_angle} | |
| ; support_conical_enabled = {support_conical_enabled} | |
| ; support_conical_min_width = {support_conical_min_width} | |
| ; support_connect_zigzags = {support_connect_zigzags} | |
| ; support_enable = {support_enable} | |
| ; support_extruder_nr = {support_extruder_nr} | |
| ; support_extruder_nr_layer_0 = {support_extruder_nr_layer_0} | |
| ; support_fan_enable = {support_fan_enable} | |
| ; support_infill_angles = {support_infill_angles} | |
| ; support_infill_extruder_nr = {support_infill_extruder_nr} | |
| ; support_infill_rate = {support_infill_rate} | |
| ; support_infill_sparse_thickness = {support_infill_sparse_thickness} | |
| ; support_initial_layer_line_distance = {support_initial_layer_line_distance} | |
| ; support_interface_angles = {support_interface_angles} | |
| ; support_interface_density = {support_interface_density} | |
| ; support_interface_enable = {support_interface_enable} | |
| ; support_interface_extruder_nr = {support_interface_extruder_nr} | |
| ; support_interface_height = {support_interface_height} | |
| ; support_interface_line_width = {support_interface_line_width} | |
| ; support_interface_material_flow = {support_interface_material_flow} | |
| ; support_interface_offset = {support_interface_offset} | |
| ; support_interface_pattern = {support_interface_pattern} | |
| ; support_interface_skip_height = {support_interface_skip_height} | |
| ; support_join_distance = {support_join_distance} | |
| ; support_line_distance = {support_line_distance} | |
| ; support_line_width = {support_line_width} | |
| ; support_material_flow = {support_material_flow} | |
| ; support_mesh = {support_mesh} | |
| ; support_mesh_drop_down = {support_mesh_drop_down} | |
| ; support_meshes_present = {support_meshes_present} | |
| ; support_offset = {support_offset} | |
| ; support_pattern = {support_pattern} | |
| ; support_roof_angles = {support_roof_angles} | |
| ; support_roof_density = {support_roof_density} | |
| ; support_roof_enable = {support_roof_enable} | |
| ; support_roof_extruder_nr = {support_roof_extruder_nr} | |
| ; support_roof_height = {support_roof_height} | |
| ; support_roof_line_distance = {support_roof_line_distance} | |
| ; support_roof_line_width = {support_roof_line_width} | |
| ; support_roof_material_flow = {support_roof_material_flow} | |
| ; support_roof_offset = {support_roof_offset} | |
| ; support_roof_pattern = {support_roof_pattern} | |
| ; support_skip_some_zags = {support_skip_some_zags} | |
| ; support_skip_zag_per_mm = {support_skip_zag_per_mm} | |
| ; support_structure = {support_structure} | |
| ; support_supported_skin_fan_speed = {support_supported_skin_fan_speed} | |
| ; support_top_distance = {support_top_distance} | |
| ; support_tower_diameter = {support_tower_diameter} | |
| ; support_tower_maximum_supported_diameter = {support_tower_maximum_supported_diameter} | |
| ; support_tower_roof_angle = {support_tower_roof_angle} | |
| ; support_tree_angle = {support_tree_angle} | |
| ; support_tree_branch_diameter = {support_tree_branch_diameter} | |
| ; support_tree_branch_diameter_angle = {support_tree_branch_diameter_angle} | |
| ; support_tree_branch_distance = {support_tree_branch_distance} | |
| ; support_tree_collision_resolution = {support_tree_collision_resolution} | |
| ; support_type = {support_type} | |
| ; support_use_towers = {support_use_towers} | |
| ; support_wall_count = {support_wall_count} | |
| ; support_xy_distance = {support_xy_distance} | |
| ; support_xy_distance_overhang = {support_xy_distance_overhang} | |
| ; support_xy_overrides_z = {support_xy_overrides_z} | |
| ; support_z_distance = {support_z_distance} | |
| ; support_zag_skip_count = {support_zag_skip_count} | |
| ; switch_extruder_extra_prime_amount = {switch_extruder_extra_prime_amount} | |
| ; switch_extruder_prime_speed = {switch_extruder_prime_speed} | |
| ; switch_extruder_retraction_amount = {switch_extruder_retraction_amount} | |
| ; switch_extruder_retraction_speed = {switch_extruder_retraction_speed} | |
| ; switch_extruder_retraction_speeds = {switch_extruder_retraction_speeds} | |
| ; top_bottom_extruder_nr = {top_bottom_extruder_nr} | |
| ; top_bottom_pattern = {top_bottom_pattern} | |
| ; top_bottom_pattern_0 = {top_bottom_pattern_0} | |
| ; top_bottom_thickness = {top_bottom_thickness} | |
| ; top_layers = {top_layers} | |
| ; top_skin_expand_distance = {top_skin_expand_distance} | |
| ; top_skin_preshrink = {top_skin_preshrink} | |
| ; top_thickness = {top_thickness} | |
| ; travel_avoid_distance = {travel_avoid_distance} | |
| ; travel_avoid_other_parts = {travel_avoid_other_parts} | |
| ; travel_avoid_supports = {travel_avoid_supports} | |
| ; travel_retract_before_outer_wall = {travel_retract_before_outer_wall} | |
| ; wall_0_extruder_nr = {wall_0_extruder_nr} | |
| ; wall_0_inset = {wall_0_inset} | |
| ; wall_0_material_flow = {wall_0_material_flow} | |
| ; wall_0_wipe_dist = {wall_0_wipe_dist} | |
| ; wall_add_middle_threshold = {wall_add_middle_threshold} | |
| ; wall_distribution_count = {wall_distribution_count} | |
| ; wall_extruder_nr = {wall_extruder_nr} | |
| ; wall_line_count = {wall_line_count} | |
| ; wall_line_width = {wall_line_width} | |
| ; wall_line_width_0 = {wall_line_width_0} | |
| ; wall_line_width_x = {wall_line_width_x} | |
| ; wall_material_flow = {wall_material_flow} | |
| ; wall_overhang_angle = {wall_overhang_angle} | |
| ; wall_overhang_speed_factor = {wall_overhang_speed_factor} | |
| ; wall_split_middle_threshold = {wall_split_middle_threshold} | |
| ; wall_thickness = {wall_thickness} | |
| ; wall_transition_angle = {wall_transition_angle} | |
| ; wall_transition_filter_deviation = {wall_transition_filter_deviation} | |
| ; wall_transition_filter_distance = {wall_transition_filter_distance} | |
| ; wall_transition_length = {wall_transition_length} | |
| ; wall_x_extruder_nr = {wall_x_extruder_nr} | |
| ; wall_x_material_flow = {wall_x_material_flow} | |
| ; wipe_brush_pos_x = {wipe_brush_pos_x} | |
| ; wipe_hop_amount = {wipe_hop_amount} | |
| ; wipe_hop_enable = {wipe_hop_enable} | |
| ; wipe_hop_speed = {wipe_hop_speed} | |
| ; wipe_move_distance = {wipe_move_distance} | |
| ; wipe_pause = {wipe_pause} | |
| ; wipe_repeat_count = {wipe_repeat_count} | |
| ; wipe_retraction_amount = {wipe_retraction_amount} | |
| ; wipe_retraction_enable = {wipe_retraction_enable} | |
| ; wipe_retraction_extra_prime_amount = {wipe_retraction_extra_prime_amount} | |
| ; wipe_retraction_prime_speed = {wipe_retraction_prime_speed} | |
| ; wipe_retraction_retract_speed = {wipe_retraction_retract_speed} | |
| ; wipe_retraction_speed = {wipe_retraction_speed} | |
| ; wireframe_bottom_delay = {wireframe_bottom_delay} | |
| ; wireframe_drag_along = {wireframe_drag_along} | |
| ; wireframe_enabled = {wireframe_enabled} | |
| ; wireframe_fall_down = {wireframe_fall_down} | |
| ; wireframe_flat_delay = {wireframe_flat_delay} | |
| ; wireframe_flow = {wireframe_flow} | |
| ; wireframe_flow_connection = {wireframe_flow_connection} | |
| ; wireframe_flow_flat = {wireframe_flow_flat} | |
| ; wireframe_height = {wireframe_height} | |
| ; wireframe_nozzle_clearance = {wireframe_nozzle_clearance} | |
| ; wireframe_printspeed = {wireframe_printspeed} | |
| ; wireframe_printspeed_bottom = {wireframe_printspeed_bottom} | |
| ; wireframe_printspeed_down = {wireframe_printspeed_down} | |
| ; wireframe_printspeed_flat = {wireframe_printspeed_flat} | |
| ; wireframe_printspeed_up = {wireframe_printspeed_up} | |
| ; wireframe_roof_drag_along = {wireframe_roof_drag_along} | |
| ; wireframe_roof_fall_down = {wireframe_roof_fall_down} | |
| ; wireframe_roof_inset = {wireframe_roof_inset} | |
| ; wireframe_roof_outer_delay = {wireframe_roof_outer_delay} | |
| ; wireframe_straight_before_down = {wireframe_straight_before_down} | |
| ; wireframe_strategy = {wireframe_strategy} | |
| ; wireframe_top_delay = {wireframe_top_delay} | |
| ; wireframe_top_jump = {wireframe_top_jump} | |
| ; wireframe_up_half_speed = {wireframe_up_half_speed} | |
| ; xy_offset = {xy_offset} | |
| ; xy_offset_layer_0 = {xy_offset_layer_0} | |
| ; z_seam_corner = {z_seam_corner} | |
| ; z_seam_position = {z_seam_position} | |
| ; z_seam_relative = {z_seam_relative} | |
| ; z_seam_type = {z_seam_type} | |
| ; z_seam_x = {z_seam_x} | |
| ; z_seam_y = {z_seam_y} | |
| ; zig_zaggify_infill = {zig_zaggify_infill} | |
| ; zig_zaggify_support = {zig_zaggify_support} |
Updated July 2nd, 2020
Exactly what I wanted, worked like a charm
I didn't have to modify anything, just added the contents of the file (without the "instructions" section) at the end of the "End G-Code" in the printer settings... Now the generated .gcode file has all the details at the end.
https://csi.t6.fyi/ won't load due to a certificate error.
@Sophist-UK thanks, should be fixed now
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Wow, just what I needed :) I'll try this out at once!