drmalex07

README

Create a template service file at /etc/systemd/system/secure-tunnel@.service. The template parameter will correspond to the name of target host:

[Unit]
Description=Setup a secure tunnel to %I
After=network.target

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

zeroseis

• Close Android File Transfer
• Open Activity Monitor and kill “Android File Transfer Agent”
• Go to where you installed “Android File Transfer.app” (I have it under /Applications)
• Ctrl+click –> “Show package contents”
• Go to Contents/Resources
• Rename “Android File Transfer Agent” to e.g. “Android File Transfer Agent_DISABLED”
• Then go to “/Users/username/Library/Application Support/Google/Android File Transfer” and again rename the Agent app.

meeech

#Add to your .zshrc right by ZSH_THEME
#######

# Setup a random theme to load from a list I define
MYZSH_RANDOM_THEMES=(\
    're5et' \
    'sorin' \
    'steeef' \
    'dstufft' \
    'random' \

derhuerst

Awesome Twitter Bots

APIs x creativity x Twitter => awesomeness!

The Rise of Twitter Bots – The New Yorker

other lists

kzu

// Licensed by Daniel Cazzulino under the MIT License
using System;
using System.Collections;
using System.Collections.Generic;
using System.Collections.Specialized;
using System.ComponentModel;
using System.Diagnostics;
using System.Dynamic;
using System.Linq;
using System.Text;

eculver

$ tmux attach
protocol version mismatch (client 7, server 6)

$ pgrep tmux
3429
$ /proc/3429/exe attach

touilleMan

#!/usr/bin/env python3
 
"""Simple HTTP Server With Upload.

This module builds on BaseHTTPServer by implementing the standard GET
and HEAD requests in a fairly straightforward manner.

see: https://gist.github.com/UniIsland/3346170
"""
 

klzgrad

朴素VPN：一个纯内核级静态隧道

由于路由管控系统的建立，实时动态黑洞路由已成为最有效的封锁手段，TCP连接重置和DNS污染成为次要手段，利用漏洞的穿墙方法已不再具有普遍意义。对此应对方法是多样化协议的VPN来抵抗识别。这里介绍一种太简单、有时很朴素的“穷人VPN”。

朴素VPN只需要一次内核配置（Linux内核），即可永久稳定运行，不需要任何用户态守护进程。所有流量转换和加密全部由内核完成，原生性能，开销几乎没有。静态配置，避免动态握手和参数协商产生指纹特征导致被识别。并且支持NAT，移动的内网用户可以使用此方法。支持广泛，基于L2TPv3标准，Linux内核3.2+都有支持，其他操作系统原则上也能支持。但有两个局限：需要root权限；一个隧道只支持一个用户。

朴素VPN利用UDP封装的静态L2TP隧道实现VPN，内核XFRM实现静态IPsec。实际上IP-in-IP隧道即可实现VPN，但是这种协议无法穿越NAT，因此必须利用UDP封装。内核3.18将支持Foo-over-UDP，在UDP里面直接封装IP，与静态的L2TP-over-UDP很类似。

创建一个朴素VPN

tonymtz

launchctl unload /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
sudo launchctl unload /Library/LaunchDaemons/org.macosforge.xquartz.privileged_startx.plist
sudo rm -rf /opt/X11* /Library/Launch*/org.macosforge.xquartz.* /Applications/Utilities/XQuartz.app /etc/*paths.d/*XQuartz
sudo pkgutil --forget org.macosforge.xquartz.pkg

# Log out and log in