fnky

ANSI Escape Sequences

Standard escape codes are prefixed with Escape:

• Ctrl-Key: ^[
• Octal: \033
• Unicode: \u001b
• Hexadecimal: \x1B
• Decimal: 27

asukakenji

Go (Golang) GOOS and GOARCH

All of the following information is based on go version go1.17.1 darwin/amd64.

GOOS Values

GOOS	Out of the Box
aix	✅
android	✅

HQJaTu

#!/usr/bin/env python3

# vim: autoindent tabstop=4 shiftwidth=4 expandtab softtabstop=4 filetype=python

# This file is part of Supermicro IPMI certificate updater.
# Supermicro IPMI certificate updater is free software: you can
# redistribute it and/or modify it under the terms of the GNU General Public
# License as published by the Free Software Foundation, version 2.
#
# This program is distributed in the hope that it will be useful, but WITHOUT

gbaman

Raspberry Pi Zero OTG Mode

Simple guide for setting up OTG modes on the Raspberry Pi Zero - By Andrew Mulholland (gbaman).

The Raspberry Pi Zero (and model A and A+) support USB On The Go, given the processor is connected directly to the USB port, unlike on the B, B+ or Pi 2 B, which goes via a USB hub.
Because of this, if setup to, the Pi can act as a USB slave instead, providing virtual serial (a terminal), virtual ethernet, virtual mass storage device (pendrive) or even other virtual devices like HID, MIDI, or act as a virtual webcam!
It is important to note that, although the model A and A+ can support being a USB slave, they are missing the ID pin (is tied to ground internally) so are unable to dynamically switch between USB master/slave mode. As such, they default to USB master mode. There is no easy way to change this right now.
It is also important to note, that a USB to UART serial adapter is not needed for any of these guides, as may be documented elsewhere across the int

touilleMan

#!/usr/bin/env python3
 
"""Simple HTTP Server With Upload.

This module builds on BaseHTTPServer by implementing the standard GET
and HEAD requests in a fairly straightforward manner.

see: https://gist.github.com/UniIsland/3346170
"""
 

jam1garner

This is a mini-tutorial of sorts for getting started with gdb on the Switch, with the target audience being people who want to mod and/or reverse games, with no prerequisite knowledge of gdb. The goal will be to walk you through some of the basic workflows needed to use a debugger on the Switch, while being brief enough for skimming for when you forget things.

If some part is unclear, your OS doesn't have install instructions, or you feel part of your workflow should be added here, feel free to comment any additions.

(If you only need a quick reference Jump to the Appendix)

Installing GDB

First off you'll need a version of GDB compatible with aarch64. This can be obtained via either a distribution of

UniIsland

#!/usr/bin/env python

"""Simple HTTP Server With Upload.

This module builds on BaseHTTPServer by implementing the standard GET
and HEAD requests in a fairly straightforward manner.

"""

klzgrad

朴素VPN：一个纯内核级静态隧道

由于路由管控系统的建立，实时动态黑洞路由已成为最有效的封锁手段，TCP连接重置和DNS污染成为次要手段，利用漏洞的穿墙方法已不再具有普遍意义。对此应对方法是多样化协议的VPN来抵抗识别。这里介绍一种太简单、有时很朴素的“穷人VPN”。

朴素VPN只需要一次内核配置（Linux内核），即可永久稳定运行，不需要任何用户态守护进程。所有流量转换和加密全部由内核完成，原生性能，开销几乎没有。静态配置，避免动态握手和参数协商产生指纹特征导致被识别。并且支持NAT，移动的内网用户可以使用此方法。支持广泛，基于L2TPv3标准，Linux内核3.2+都有支持，其他操作系统原则上也能支持。但有两个局限：需要root权限；一个隧道只支持一个用户。

朴素VPN利用UDP封装的静态L2TP隧道实现VPN，内核XFRM实现静态IPsec。实际上IP-in-IP隧道即可实现VPN，但是这种协议无法穿越NAT，因此必须利用UDP封装。内核3.18将支持Foo-over-UDP，在UDP里面直接封装IP，与静态的L2TP-over-UDP很类似。

创建一个朴素VPN

brandonb927

#!/bin/sh

###
# SOME COMMANDS WILL NOT WORK ON macOS (Sierra or newer)
# For Sierra or newer, see https://github.com/mathiasbynens/dotfiles/blob/master/.macos
###

# Alot of these configs have been taken from the various places
# on the web, most from here
# https://github.com/mathiasbynens/dotfiles/blob/5b3c8418ed42d93af2e647dc9d122f25cc034871/.osx

zeroseis

• Close Android File Transfer
• Open Activity Monitor and kill “Android File Transfer Agent”
• Go to where you installed “Android File Transfer.app” (I have it under /Applications)
• Ctrl+click –> “Show package contents”
• Go to Contents/Resources
• Rename “Android File Transfer Agent” to e.g. “Android File Transfer Agent_DISABLED”
• Then go to “/Users/username/Library/Application Support/Google/Android File Transfer” and again rename the Agent app.